Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160422/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 18:07.42 bbb arm-omap2plus_defconfig : FAILED 1:54.13 bbb arm-multi_v7_defconfig : FAILED 1:58.42 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:17.23 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.31 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.48 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.67 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:12.84 beaver arm-multi_v7_defconfig : FAILED 1:50.05 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:50.14 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.74 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.54 cosmic arm-multi_v7_defconfig : FAILED 2:06.03 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:09.17 dalmore arm-tegra_defconfig : FAILED 1:53.23 dalmore arm-multi_v7_defconfig : FAILED 1:59.04 dalmore arm-multi_lpae_defconfig : FAILED 2:10.68 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:55.46 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.48 snow arm-multi_v7_nosmp_defconfig : FAILED 1:49.69 snowball arm-u8500_defconfig : FAILED 1:57.61 snowball arm-multi_v7_defconfig : FAILED 2:03.30 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:03.00
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.05 arndale arm-exynos_defconfig : passed 1:28.98 arndale arm-multi_v7_defconfig : passed 1:24.72 arndale arm-multi_lpae_defconfig : passed 1:34.89 capri arm-bcm_defconfig : passed 0:48.82 capri arm-multi_v7_defconfig : passed 0:49.99 capri arm-multi_v7_nosmp_defconfig : warnings 1:09.38 chitra powerpc-pasemi_defconfig : passed 1:59.30 chitra powerpc-ppc64_defconfig : passed 1:58.85 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:28.86 colibri-vf61 arm-multi_v7_defconfig : passed 1:23.47 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:19.91 colombus arm-sunxi_defconfig : passed 2:25.94 colombus arm-multi_v7_defconfig : passed 2:50.42 colombus arm-multi_lpae_defconfig : passed 2:31.60 cubie arm-sunxi_defconfig : passed 0:49.19 cubie arm-multi_v7_defconfig : passed 0:50.42 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.62 cubie2 arm-sunxi_defconfig : passed 0:47.97 cubie2 arm-multi_v7_defconfig : passed 0:51.05 cubie2 arm-multi_lpae_defconfig : passed 0:59.21 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:51.12 cubox arm-multi_v7_defconfig : passed 1:22.64 cubox arm-mvebu_v7_defconfig : passed 1:09.27 cubox arm-multi_v7_nosmp_defconfig : passed 1:23.88 hummingboard arm-imx_v6_v7_defconfig : passed 1:39.02 hummingboard arm-multi_v7_defconfig : passed 1:42.13 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:11.73 jetsontk1 arm-tegra_defconfig : warnings 0:48.60 jetsontk1 arm-multi_lpae_defconfig : warnings 2:00.02 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.44 pandaes arm-omap2plus_defconfig : warnings 1:41.87 pandaes arm-multi_v7_defconfig : passed 1:52.16 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:54.64 pi arm-exynos_defconfig : passed 2:13.04 pi arm-multi_v7_defconfig : passed 2:13.60 pi arm-multi_lpae_defconfig : passed 2:18.97 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.78 pit arm-exynos_defconfig : passed 2:13.21 pit arm-multi_v7_defconfig : passed 2:13.35 pit arm-multi_lpae_defconfig : passed 2:17.83 pit arm-multi_v7_nosmp_defconfig : warnings 2:12.35 seattle arm64-defconfig : passed 2:23.92 snow arm-exynos_defconfig : passed 2:09.93 snow arm-multi_v7_defconfig : passed 2:20.27 snow arm-multi_lpae_defconfig : passed 2:00.91 socfpga arm-socfpga_defconfig : warnings 1:08.27 socfpga arm-multi_v7_defconfig : warnings 1:15.16 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:34.68 trimslice arm-tegra_defconfig : warnings 2:51.10 trimslice arm-multi_v7_defconfig : warnings 2:53.41 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:39.35 wandboard arm-imx_v6_v7_defconfig : passed 1:29.91 wandboard arm-multi_v7_defconfig : passed 1:14.95 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:17.95
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 1:47.50 jetsontk1 arm-multi_v7_defconfig : OFFLINE 2:11.64 omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.20 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:17.95 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:22.60 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:26.21 parallella arm-multi_v7_defconfig : OFFLINE 2:28.25 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.48 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.50 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:02.36 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:45.62 sama5 arm-sama5_defconfig : OFFLINE 2:22.41 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:28.32 seaboard arm-tegra_defconfig : OFFLINE 2:17.77 seaboard arm-multi_v7_defconfig : OFFLINE 2:24.07 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.93
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.582560] usbcore: registered new interface driver cdc_ether [ 1.588387] usbcore: registered new interface driver smsc75xx [ 1.594116] usbcore: registered new interface driver smsc95xx [ 1.599835] usbcore: registered new interface driver net1080 [ 1.605481] usbcore: registered new interface driver cdc_subset [ 1.611378] usbcore: registered new interface driver zaurus [ 1.616953] usbcore: registered new interface driver cdc_ncm [ 1.623218] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.629873] usb_phy_generic.1.auto suppl [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc4-next-20160422 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Thu Apr 21 22:37:32 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fa3d8, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc4-next-20160422 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e8f0>] (unwind_backtrace) from [<c030b45c>] (show_stack+0x10/0x14) [ 0.000000] [<c030b45c>] (show_stack) from [<c0335e48>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335e48>] (__warn) from [<c0335e98>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e98>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x978) [ 0.000000] [<c0f03424>] (setup_arch) from [ [PYBOOT] [arndale 18:02]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 18:03]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.638331] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.648233] ledtrig-cpu: registered to indicate activity on CPUs [ 1.655482] usbcore: registered new interface driver usbhid [ 1.661398] usbhid: USB HID core driver [ 1.673451] NET: Registered protocol family 10 [ 1.679978] sit: IPv6 over IPv4 tunneling driver [ 1.686107] NET: Registered protocol family 17 [ 1.690865] can: controller area network core (rev 20120528 abi 9) [ 1.697498] NET: Registered protocol family 29 [ 1.702207] can: raw protocol (rev 20120528) [ 1.706718] can: broadcast manager protocol (rev 20120528 t) [ 1.712702] can: netlink gateway (rev 20130117) max_hops=1 [ 1.719460] Key type dns_resolver registered [ 1.724317] omap_voltage_late_init: Voltage driver support not added [ 1.732632] ThumbEE CPU extension supported. [ 1.737240] Registering SWP/SWPB emulation handler [ 1.780479] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.786992] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.794737] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.803476] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811379] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819258] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827052] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.834395] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.843146] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.851069] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.860759] mmc1: new high speed MMC card at address 0001 [ 1.867995] hctosys: unable to open rtc device (rtc0) [ 1.881024] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.887060] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.894049] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.902894] mmcblk1: p1 p2 [ 1.908660] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:56]: got exception: timeout ~$off
[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.309455] sdhci: Secure Digital Host Controller Interface driver [ 1.315992] sdhci: Copyright(c) Pierre Ossman [ 1.321725] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.386629] Synopsys Designware Multimedia Card Interface Driver [ 1.393902] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.402805] ledtrig-cpu: registered to indicate activity on CPUs [ 1.409639] usbcore: registered new interface driver usbhid [ 1.415525] usbhid: USB HID core driver [ 1.424628] NET: Registered protocol family 10 [ 1.431036] sit: IPv6 over IPv4 tunneling driver [ 1.436866] NET: Registered protocol family 17 [ 1.441589] can: controller area network core (rev 20120528 abi 9) [ 1.448185] NET: Registered protocol family 29 [ 1.452866] can: raw protocol (rev 20120528) [ 1.457368] can: broadcast manager protocol (rev 20120528 t) [ 1.463339] can: netlink gateway (rev 20130117) max_hops=1 [ 1.469801] Key type dns_resolver registered [ 1.474637] omap_voltage_late_init: Voltage driver support not added [ 1.482447] ThumbEE CPU extension supported. [ 1.494765] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.502377] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.510372] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.518127] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.525812] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533510] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.540799] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.548384] hctosys: unable to open rtc device (rtc0) [ 1.558929] Waiting for root device /dev/mmcblk0p2... [ 1.595951] mmc1: new high speed MMC card at address 0001 [ 1.602424] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.607496] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.613982] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.622420] mmcblk1: p1 p2
[PYBOOT] [bbb 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:14]: got exception: timeout ~$off
[PYBOOT] [bbb 02:16]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.110227] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.116347] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.122675] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.129550] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.139143] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.148640] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.155656] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.198912] ledtrig-cpu: registered to indicate activity on CPUs [ 2.207730] oprofile: using arm/armv7 [ 2.212732] Initializing XFRM netlink socket [ 2.217879] NET: Registered protocol family 10 [ 2.228932] sit: IPv6 over IPv4 tunneling driver [ 2.237867] NET: Registered protocol family 17 [ 2.242800] NET: Registered protocol family 15 [ 2.248035] Key type dns_resolver registered [ 2.252948] omap_voltage_late_init: Voltage driver support not added [ 2.259687] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.268225] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.278711] ThumbEE CPU extension supported. [ 2.283237] Registering SWP/SWPB emulation handler [ 2.288326] SmartReflex Class3 initialized [ 2.346855] mmc1: new high speed MMC card at address 0001 [ 2.361261] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.370910] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.382565] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.404448] mmcblk1: p1 p2 [ 2.428831] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.436194] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.449594] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.457976] hctosys: unable to open rtc device (rtc0) [ 2.463409] sr_init: No PMIC hook to init smartreflex [ 2.469150] sr_init: platform driver register failed for SR [ 2.513161] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.183530] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.198289] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.205360] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.230181] rtc-ds1307 2-006f: SET TIME! [ 2.235902] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.242660] rtc-ds1307 2-006f: 64 bytes nvram [ 2.247272] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.255469] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.261246] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.269471] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.278619] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.285507] hub 1-0:1.0: USB hub found [ 2.289460] hub 1-0:1.0: 1 port detected [ 2.293859] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.299625] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.307730] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.316741] hub 2-0:1.0: USB hub found [ 2.320704] hub 2-0:1.0: 1 port detected [ 2.326753] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.394004] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.411718] aic_dvdd_fixed: disabling [ 2.416418] Waiting for root device /dev/mmcblk0p1... [ 2.436736] mmc1: new high speed MMC card at address 0001 [ 2.442709] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.447594] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.453931] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.460812] mmcblk1: p1 [ 2.599678] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.634706] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.659872] hub 2-1:1.0: USB hub found [ 2.663841] hub 2-1:1.0: 4 ports detected [ 2.755860] hub 1-1:1.0: USB hub found [ 2.759844] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.177917] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.192615] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.199689] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.225109] rtc-ds1307 2-006f: SET TIME! [ 2.230849] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.237607] rtc-ds1307 2-006f: 64 bytes nvram [ 2.242215] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.250385] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.256167] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.264406] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.273560] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.280440] hub 1-0:1.0: USB hub found [ 2.284395] hub 1-0:1.0: 1 port detected [ 2.288801] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.294574] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.302679] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.311680] hub 2-0:1.0: USB hub found [ 2.315649] hub 2-0:1.0: 1 port detected [ 2.321720] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.388862] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.406995] aic_dvdd_fixed: disabling [ 2.411706] Waiting for root device /dev/mmcblk0p1... [ 2.438848] mmc1: new high speed MMC card at address 0001 [ 2.444828] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.449712] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.456046] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.462917] mmcblk1: p1 [ 2.594610] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.629637] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.654801] hub 2-1:1.0: USB hub found [ 2.658770] hub 2-1:1.0: 4 ports detected [ 2.750811] hub 1-1:1.0: USB hub found [ 2.754786] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.017183] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.030721] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.037769] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.063506] rtc-ds1307 2-006f: SET TIME! [ 2.069133] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.075839] rtc-ds1307 2-006f: 64 bytes nvram [ 2.080424] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.087810] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.093580] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.101781] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.110909] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.117641] hub 1-0:1.0: USB hub found [ 2.121592] hub 1-0:1.0: 1 port detected [ 2.125908] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.131668] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.139748] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.148619] hub 2-0:1.0: USB hub found [ 2.152561] hub 2-0:1.0: 1 port detected [ 2.157837] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.224816] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.237794] aic_dvdd_fixed: disabling [ 2.243138] Waiting for root device /dev/mmcblk0p1... [ 2.290043] mmc1: new high speed MMC card at address 0001 [ 2.295914] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.300757] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.307039] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.313822] mmcblk1: p1 [ 2.433042] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.463060] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.491854] hub 2-1:1.0: USB hub found [ 2.495835] hub 2-1:1.0: 4 ports detected [ 2.587855] hub 1-1:1.0: USB hub found [ 2.591825] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:10]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:12]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.705011] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.711331] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.718196] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.728591] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.733436] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.739749] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.746591] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.756183] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.765685] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.772740] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.819269] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.825558] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.832429] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.842016] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.851502] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.858542] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.864656] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.870972] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.877812] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.887402] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.896889] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.903928] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.949430] hctosys: unable to open rtc device (rtc0) [ 2.954725] sr_init: No PMIC hook to init smartreflex [ 2.960241] sr_init: platform driver register failed for SR [ 3.000975] mmc1: new high speed MMC card at address 0001 [ 3.008891] aic_dvdd_fixed: disabling [ 3.008962] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.009687] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.010420] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.030197] mmcblk1: p1 [ 3.033586] ldousb: disabling [ 3.040489] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.416420] tegra-pcie 3000.pcie-controller: link 2 down, ignoring [ 4.422716] tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00 [ 4.429677] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.435852] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 4.442717] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 4.450017] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.455505] PCI: bus0: Fast back to back transfers enabled [ 4.464062] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.470680] [drm] No driver support for vblank timestamp query. [ 4.476628] drm drm: No connectors reported connected with modes [ 4.482637] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.507938] Console: switching to colour frame buffer device 128x48 [ 4.520442] drm drm: fb0: frame buffer device [ 4.538411] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.549245] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.555709] tegra-ehci 7d004000.usb: EHCI Host Controller [ 4.561121] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 4.569350] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 4.583420] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 4.590275] hub 1-0:1.0: USB hub found [ 4.594050] hub 1-0:1.0: 1 port detected [ 4.598988] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.604398] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.612126] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 4.623416] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.630178] hub 2-0:1.0: USB hub found [ 4.633944] hub 2-0:1.0: 1 port detected [ 4.643109] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 4.656726] vdd_sata,avdd_plle: disabling [ 4.661560] usb1_vbus: disabling [ 4.665661] Waiting for root device /dev/mmcblk0p1... [ 4.943419] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.881968] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 4.375144] tegra-pcie 3000.pcie-controller: link 2 down, ignoring [ 4.381418] tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00 [ 4.388373] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.394542] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 4.401405] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 4.408700] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.414183] PCI: bus0: Fast back to back transfers enabled [ 4.421435] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.428047] [drm] No driver support for vblank timestamp query. [ 4.433982] drm drm: No connectors reported connected with modes [ 4.439984] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.459370] Console: switching to colour frame buffer device 128x48 [ 4.471145] drm drm: fb0: frame buffer device [ 4.475581] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.485473] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.491926] tegra-ehci 7d004000.usb: EHCI Host Controller [ 4.497331] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 4.505068] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 4.517856] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 4.524223] hub 1-0:1.0: USB hub found [ 4.527986] hub 1-0:1.0: 1 port detected [ 4.532628] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.538035] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.545692] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 4.557853] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.564163] hub 2-0:1.0: USB hub found [ 4.567921] hub 2-0:1.0: 1 port detected [ 4.575381] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 4.588510] vdd_sata,avdd_plle: disabling [ 4.592900] usb1_vbus: disabling [ 4.596800] Waiting for root device /dev/mmcblk0p1... [ 4.877859] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.816390] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.976601] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.991031] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.431751] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.818695] eth0: device MAC address 12:c6:bf:a0:7f:03 [ 89.974135] RX IPC Checksum Offload disabled [ 89.978764] No MAC Management Counters available [ 89.984550] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/12:c6:bf:a0:7f:03 Sending on LPF/eth0/12:c6:bf:a0:7f:03 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:19]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.504118] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.578366] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.588694] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.662926] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.673252] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.747493] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.757818] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.832062] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.842393] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.916588] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.926919] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 39.001162] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.011490] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.085689] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.096011] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.170244] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.180563] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.254742] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.265063] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.339301] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.349625] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.423800] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.434119] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.508354] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.518680] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.592917] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.603243] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.677478] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.687805] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.762049] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.772377] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.846548] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.856869] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.070824] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.144801] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.154875] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.228851] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.238927] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.312904] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.322979] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.396953] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.407031] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.481013] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.491100] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.565079] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.575146] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.649125] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.659196] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.733170] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.743240] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.817220] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.827307] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.901291] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.911367] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.985345] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.995418] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.069401] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.079476] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.153456] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.163531] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.237506] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.247580] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.321561] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.331642] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.405620] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.415701] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:05]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.855792] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.929696] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.939750] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.013661] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.023714] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.097626] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.107688] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.181595] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.191652] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.265561] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.275626] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.349534] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.359598] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.433512] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.443571] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.517477] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.527539] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.601444] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.611503] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.685412] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.695460] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.769364] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.779416] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.853320] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.863372] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.937284] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.947336] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.021247] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.031301] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.105213] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.115274] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.189182] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.199238] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.799354] can: netlink gateway (rev 20130117) max_hops=1 [ 2.806355] Key type dns_resolver registered [ 2.812833] ThumbEE CPU extension supported. [ 2.817223] Registering SWP/SWPB emulation handler [ 2.834648] usb1_vbus: supplied by vdd-sys-5v0 [ 2.844922] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865413] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.886672] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.893424] [drm] No driver support for vblank timestamp query. [ 2.912981] mmc1: new high speed MMC card at address 0001 [ 2.922960] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.931085] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.940731] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.950334] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.959876] mmcblk1: p1 [ 3.073231] Console: switching to colour frame buffer device 240x75 [ 3.160343] drm drm: fb0: frame buffer device [ 3.181848] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.196699] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.202283] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.211122] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.226878] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.237325] hub 1-0:1.0: USB hub found [ 3.241313] hub 1-0:1.0: 1 port detected [ 3.252201] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.266127] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.329573] dvdd_ts: disabling [ 3.332799] usb1_vbus: disabling [ 3.336056] vdd_cam_1v8_reg: disabling [ 3.343849] Waiting for root device /dev/mmcblk0p1... [ 3.551878] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.529743] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.501848] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:08]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:09]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.800152] can: netlink gateway (rev 20130117) max_hops=1 [ 2.807153] Key type dns_resolver registered [ 2.813650] ThumbEE CPU extension supported. [ 2.818043] Registering SWP/SWPB emulation handler [ 2.833930] usb1_vbus: supplied by vdd-sys-5v0 [ 2.844177] usb2_vbus: supplied by vdd-sys-5v0 [ 2.861455] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.883292] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.890040] [drm] No driver support for vblank timestamp query. [ 2.913700] mmc1: new high speed MMC card at address 0001 [ 2.921198] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.926707] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.935074] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.943643] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.952414] mmcblk1: p1 [ 3.067889] Console: switching to colour frame buffer device 240x75 [ 3.155072] drm drm: fb0: frame buffer device [ 3.172728] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.187700] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.193309] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.201985] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.217741] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.228252] hub 1-0:1.0: USB hub found [ 3.232247] hub 1-0:1.0: 1 port detected [ 3.242920] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.257646] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.319731] dvdd_ts: disabling [ 3.322951] usb1_vbus: disabling [ 3.326209] vdd_cam_1v8_reg: disabling [ 3.333924] Waiting for root device /dev/mmcblk0p1... [ 3.542750] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.526090] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.333184] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.322896] can: raw protocol (rev 20120528) [ 2.327215] can: broadcast manager protocol (rev 20120528 t) [ 2.332938] can: netlink gateway (rev 20130117) max_hops=1 [ 2.339517] Key type dns_resolver registered [ 2.344527] ThumbEE CPU extension supported. [ 2.365595] usb1_vbus: supplied by vdd-sys-5v0 [ 2.373939] usb2_vbus: supplied by vdd-sys-5v0 [ 2.388220] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.410885] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.417569] [drm] No driver support for vblank timestamp query. [ 2.581695] Console: switching to colour frame buffer device 240x75 [ 2.668201] drm drm: fb0: frame buffer device [ 2.672808] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.683407] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.688977] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.697171] mmc1: new high speed MMC card at address 0001 [ 2.703813] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.710101] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.715106] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.721243] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.729841] hub 1-0:1.0: USB hub found [ 2.733827] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.740035] hub 1-0:1.0: 1 port detected [ 2.744352] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.754284] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.762392] mmcblk1: p1 [ 2.770500] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.811153] dvdd_ts: disabling [ 2.814308] usb1_vbus: disabling [ 2.817627] vdd_cam_1v8_reg: disabling [ 2.822958] Waiting for root device /dev/mmcblk0p1... [ 3.061505] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.016800] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.918251] Bluetooth: RFCOMM socket layer initialized [ 2.923476] Bluetooth: RFCOMM ver 1.11 [ 2.927390] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.932788] Bluetooth: BNEP socket layer initialized [ 2.937851] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.943850] Bluetooth: HIDP socket layer initialized [ 2.950683] Key type dns_resolver registered [ 2.960160] Registering SWP/SWPB emulation handler [ 2.980544] usb1_vbus: supplied by vdd-sys-5v0 [ 2.990083] usb2_vbus: supplied by vdd-sys-5v0 [ 3.007320] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.034295] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.041152] [drm] No driver support for vblank timestamp query. [ 3.218087] Console: switching to colour frame buffer device 240x75 [ 3.304729] drm drm: fb0: frame buffer device [ 3.337353] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.346401] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.352128] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.361307] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.387277] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.400735] hub 1-0:1.0: USB hub found [ 3.404767] hub 1-0:1.0: 1 port detected [ 3.418870] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.432875] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.519864] dvdd_ts: disabling [ 3.522970] usb1_vbus: disabling [ 3.526231] vdd_cam_1v8_reg: disabling [ 3.530934] ALSA device list: [ 3.533927] #0: NVIDIA Tegra Dalmore [ 3.539813] Waiting for root device /dev/mmcblk0p1... [ 3.727277] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.772176] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.417808] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.728514] Registering SWP/SWPB emulation handler [ 1.736405] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.741073] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.748466] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.755619] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.762270] [drm] No driver support for vblank timestamp query. [ 1.768145] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.774489] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.779518] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.787041] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.793127] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.793137] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.806795] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.807057] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.807129] hub 1-3:1.0: USB hub found [ 1.816477] hub 1-3:1.0: 3 ports detected [ 1.826227] mmc1: new DDR MMC card at address 0001 [ 1.826966] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.827265] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.832543] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.832800] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.838736] mmcblk1: p1 p2 [ 1.886881] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889233] max98090 1-0010: use default 2.8v micbias [ 1.898659] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.903155] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.939626] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.964334] VDD10_HDMI_1.0V: disabling [ 1.965061] vdd_g3d: disabling [ 1.966124] BUCK8_2.8V: disabling [ 1.970185] ALSA device list: [ 1.971757] #0: Odroid-U3 [ 1.975596] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@snow:~# cat /proc/cmdline cat /proc/cmdline[ 6.951644] Unable to handle kernel paging request at virtual address ee605380 [ 6.957382] pgd = c0204000 [ 6.960072] [ee605380] *pgd=6e60041e(bad) [ 6.964067] Internal error: Oops: 8000000d [#1] ARM [ 6.968926] Modules linked in: [ 6.971967] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc4-next-20160422 #1 [ 6.980383] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 6.986459] task: c1005f70 ti: c1000000 task.ti: c1000000 [ 6.991842] PC is at 0xee605380 [ 6.994970] LR is at cpu_init+0x14/0x54 [ 6.998786] pc : [<ee605380>] lr : [<c0309f60>] psr: 000001d3 [ 6.998786] sp : c1001f50 ip : 00000000 fp : 00000000 [ 7.010242] r10: c1035b58 r9 : c1005f70 r8 : 97662764 [ 7.015451] r7 : 00000001 r6 : c10b21e0 r5 : ed191700 r4 : c1134b84 [ 7.021960] r3 : c030d7e0 r2 : 00cf99f4 r1 : 6e07c059 r0 : 00000000 [ 7.028471] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 7.035761] Control: 10c53c7d Table: 6e07c059 DAC: 00000051 [ 7.041490] Process swapper (pid: 0, stack limit = 0xc1000218) [ 7.047307] Stack: (0xc1001f50 to 0xc1002000) [ 7.051648] 1f40: c10fc095 c034e014 00000000 c1035b58 [ 7.059807] 1f60: c100619c c030c550 c10377c0 895c86f7 00000001 c10fc095 c10fc095 c1000000 [ 7.067966] 1f80: c100212c c10b1680 c1002134 c10fc095 c1001fa4 c0a94468 ffffffff c1000000 [ 7.076125] 1fa0: c1001fac c0a94668 c10b2140 c0357de0 00000001 ffffffff 00000000 c0f00c40 [ 7.084284] 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c10fe1d4 c10020b4 [ 7.092443] 1fe0: c0f8ba1c c1007138 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 7.100610] [<c0309f60>] (cpu_init) from [<c034e014>] (atomic_notifier_call_chain+0x18/0x20) [ 7.109026] [<c034e014>] (atomic_notifier_call_chain) from [<c030c550>] (__switch_to+0x34/0x64) [ 7.117703] Code: 00000000 00000000 00000000 00000000 (00000000) [ 7.123779] ---[ end trace cb88537fdc8fa202 ]--- [ 7.128378] Kernel panic - not syncing: Attempted to kill the idle task! [ 7.135062] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 01:48]: got exception: ERROR: Timeout waiting for command: cat /proc/cmdline. ~$off
[PYBOOT] [snow 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.953613] NET: Registered protocol family 10 [ 1.959777] sit: IPv6 over IPv4 tunneling driver [ 1.965637] NET: Registered protocol family 17 [ 1.970123] can: controller area network core (rev 20120528 abi 9) [ 1.976440] NET: Registered protocol family 29 [ 1.980926] can: raw protocol (rev 20120528) [ 1.985229] can: broadcast manager protocol (rev 20120528 t) [ 1.990905] can: netlink gateway (rev 20130117) max_hops=1 [ 1.997253] Key type dns_resolver registered [ 2.001831] ThumbEE CPU extension supported. [ 2.006164] Registering SWP/SWPB emulation handler [ 2.018493] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.025634] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.035186] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.042236] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.049285] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.056304] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.073547] db8500-esram12: disabling [ 2.077392] db8500-esram34: disabling [ 2.081512] V-CSI/DSI: disabling [ 2.084899] mmci-reg: disabling [ 2.089904] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.095916] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.104644] Waiting for root device /dev/mmcblk0p4... [ 2.140594] mmc3: new high speed MMC card at address 0001 [ 2.146911] mmcblk3: mmc3:0001 3.53 GiB [ 2.151336] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.157104] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.162933] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.169860] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes
[PYBOOT] [snowball 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:01]: got exception: timeout ~$off
[PYBOOT] [snowball 02:02]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.877868] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.885375] ledtrig-cpu: registered to indicate activity on CPUs [ 1.891693] usbcore: registered new interface driver usbhid [ 1.897247] usbhid: USB HID core driver [ 1.904449] NET: Registered protocol family 10 [ 1.959747] sit: IPv6 over IPv4 tunneling driver [ 1.964904] NET: Registered protocol family 17 [ 1.969360] can: controller area network core (rev 20120528 abi 9) [ 1.975585] NET: Registered protocol family 29 [ 1.980041] can: raw protocol (rev 20120528) [ 1.984313] can: broadcast manager protocol (rev 20120528 t) [ 1.989990] can: netlink gateway (rev 20130117) max_hops=1 [ 1.995880] Key type dns_resolver registered [ 2.000305] ThumbEE CPU extension supported. [ 2.054504] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.069213] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.078277] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.085266] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.092254] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.099243] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.111114] db8500-esram12: disabling [ 2.158905] db8500-esram34: disabling [ 2.177642] V-CSI/DSI: disabling [ 2.188873] mmci-reg: disabling [ 2.192443] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.198394] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.219573] Waiting for root device /dev/mmcblk0p4... [ 3.025726] mmc3: new high speed MMC card at address 0001 [ 3.039550] mmcblk3: mmc3:0001 3.53 GiB [ 3.048706] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.054229] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.068756] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.080566] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:01]: got exception: timeout ~$off
[PYBOOT] [snowball 02:02]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.526428] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.532958] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.545593] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.556365] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.566284] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.577026] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.600799] NET: Registered protocol family 10 [ 2.606170] sit: IPv6 over IPv4 tunneling driver [ 2.611572] NET: Registered protocol family 17 [ 2.616027] NET: Registered protocol family 35 [ 2.620605] NET: Registered protocol family 37 [ 2.625122] Registering SWP/SWPB emulation handler [ 2.631561] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.638549] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-03 02:44:59 UTC (954729899) [ 2.647766] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.654754] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.661773] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.668731] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.682342] db8500-esram12: disabling [ 2.686096] db8500-esram34: disabling [ 2.690032] V-CSI/DSI: disabling [ 2.693298] mmci-reg: disabling [ 2.696594] ALSA device list: [ 2.699554] #0: MOP500-card [ 2.702911] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.708862] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.715057] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter