Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.16-rc1-330-g401c58f/
Failed boards:
capri bcm_defconfig : FAILED 1:24.44 snow multi_v7_defconfig : FAILED 1:14.01 snow multi_lpae_defconfig : FAILED 1:13.91 snowball u8500_defconfig : FAILED 1:51.38
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.91 arndale exynos_defconfig : passed 1:15.74 arndale multi_v7_defconfig : passed 1:37.26 arndale multi_lpae_defconfig : passed 1:28.19 bbb omap2plus_defconfig : passed 1:29.63 bbb multi_v7_defconfig : passed 1:29.12 beaver tegra_defconfig : passed 0:59.65 beaver multi_v7_defconfig : passed 0:57.97 capri multi_v7_defconfig : passed 0:40.22 cubie sunxi_defconfig : passed 1:12.88 cubie multi_v7_defconfig : passed 1:38.56 cubie2 sunxi_defconfig : passed 1:07.23 cubie2 multi_v7_defconfig : passed 1:23.37 cubie2 multi_lpae_defconfig : passed 1:21.83 cubox multi_v7_defconfig : passed 1:05.50 dalmore tegra_defconfig : passed 1:33.46 dalmore multi_v7_defconfig : passed 1:18.02 dalmore multi_lpae_defconfig : passed 1:21.80 hummingboard imx_v6_v7_defconfig : passed 1:17.85 hummingboard multi_v7_defconfig : passed 1:13.88 jetson tegra_defconfig : passed 1:02.52 jetson multi_v7_defconfig : passed 0:55.57 jetson multi_lpae_defconfig : passed 0:54.61 omap5uevm omap2plus_defconfig : warnings 1:01.30 omap5uevm multi_v7_defconfig : warnings 1:54.15 omap5uevm multi_lpae_defconfig : warnings 2:04.13 panda omap2plus_defconfig : warnings 1:29.57 panda multi_v7_defconfig : warnings 1:39.42 sama5 sama5_defconfig : warnings 2:03.91 seaboard tegra_defconfig : passed 1:04.82 snow exynos_defconfig : passed 1:30.00 snowball multi_v7_defconfig : passed 4:17.02 trimslice tegra_defconfig : passed 1:09.53 trimslice multi_v7_defconfig : passed 1:02.89 wandboard imx_v6_v7_defconfig : passed 1:05.48 wandboard multi_v7_defconfig : passed 1:24.33
Offline boards:
seaboard multi_v7_defconfig : OFFLINE 1:17.63
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board capri-bcm_defconfig failure log: -------------------------------------------------
[ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1200 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.000000] Memory: 1998916K/2093056K available (6484K kernel code, 893K rwdata, 2588K rodata, 664K init, 307K bss, 94140K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ae4464 (9074 kB) [ 0.000000] .init : 0xc0ae5000 - 0xc0b8b100 ( 665 kB) [ 0.000000] .data : 0xc0b8c000 - 0xc0c6b740 ( 894 kB) [ 0.000000] .bss : 0xc0c6b748 - 0xc0cb8688 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.612820] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.613351] Console: colour dummy device 80x30 [ 2889.613363] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.613371] pid_max: default: 32768 minimum: 301 [ 2889.613430] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.613436] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.613707] CPU: Testing write buffer coherency: ok [ 2889.613818] CPU0: update cpu_capacity 1024 [ 2889.613824] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.613915] Setting up static identity map for 0x408232d8 - 0x40823370 [ 2889.615014] CPU1: Booted secondary processor [ 2889.615047] CPU1: update cpu_capacity 1024 [ 2889.615050] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.615093] Brought up 2 CPUs [ 2889.615102] SMP: Total of 2 processors activated. [ 2889.615106] CPU: All CPU(s) started in HYP mode. [ 2889.615109] CPU: Virtualizati~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0add388 (9045 kB) [ 0.000000] .init : 0xc0ade000 - 0xc0b83100 ( 661 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62d80 ( 892 kB) [ 0.000000] .bss : 0xc0c62d88 - 0xc0caedc8 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.650257] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.650800] Console: colour dummy device 80x30 [ 2889.650812] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.650819] pid_max: default: 32768 minimum: 301 [ 2889.650879] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.650884] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.651153] CPU: Testing write buffer coherency: ok [ 2889.651264] CPU0: update cpu_capacity 1024 [ 2889.651270] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.651367] Setting up static identity map for 0x4081c2b0 - 0x4081c348 [ 2889.652483] CPU1: Booted secondary processor [ 2889.652516] CPU1: update cpu_capacity 1024 [ 2889.652519] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.652562] Brought up 2 CPUs [ 2889.652570] SMP: Total of 2 processors activated. [ 2889.652574] CPU: All CPU(s) started in HYP mode. [ 2889.652577] CPU: Virtualization extensions available. [ 2889.652820] devtmpfs: initialized [ 2889.654707] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.654893] pinctrl core: initialized pinctrl subsystem [ 2889.655096] regulator-dummy: no parameters [ 2889.660957] NET: Registered protocol family 16 [ 2889.661826] DMA: pre~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.627380] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635314] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647247] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654541] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.666015] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674560] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686492] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693786] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705291] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713104] HS USB OTG: no transceiver configured [ 3.717803] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725646] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733581] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745513] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752807] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764312] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772827] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784729] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.792053] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803527] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811340] HS USB OTG: no transceiver configured [ 3.816040] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823913] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831817] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843749] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851074] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862548] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871063] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882995] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890289] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901763] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909576] HS USB OTG: no transceiver configured [ 3.914306] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922149] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930053] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941986] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949279] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960784] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org