arndale : FAILED 1:03.87 bbb : FAILED 0:51.30 beaver : passed 0:50.96 multi-beaver : passed 0:40.24 cubie2 : passed 1:01.53 cubie : passed 0:57.25 cubox : FAILED 1:07.88 panda : passed 2:58.17 multi-panda : passed 2:43.13 sama5 : passed 1:40.81 snowball : passed 1:06.09 multi-snowball : passed 0:37.86 multi-trimslice : passed 0:38.35 wandboard : passed 1:19.99 multi-wandboard : passed 0:36.49

Board legend:

Board : System SoC Defconfig

arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

Last entries of failed logs below:

========================================================================

Board arndale failure log: -------------------------------------------------

Load address: 0x40800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############### done Bytes transferred = 2737576 (29c5a8 hex) ARNDALE5250 # tftpboot 0x407c0000 172.16.1.4:/srv/tftp/next/next-20131030/exynos5250-arndale.dtb tftpboot 0x407c0000 172.16.1.4:/srv/tftp/next/next-20131030/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.159 Filename '/srv/tftp/next/next-20131030/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *####### done Bytes transferred = 33005 (80ed hex) ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2737512 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff0ec ... OK

Starting kernel ...

~$off

========================================================================

Board bbb failure log: -------------------------------------------------

[ 0.000000] OMAP clocksource: timer1 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.001510] Calibrating delay loop... 363.72 BogoMIPS (lpj=1818624) [ 0.109377] pid_max: default: 32768 minimum: 301 [ 0.110017] Security Framework initialized [ 0.110209] Mount-cache hash table entries: 512 [ 0.130361] CPU: Testing write buffer coherency: ok [ 0.132270] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.132360] Setting up static identity map for 0x80538660 - 0x805386d0 [ 0.136592] Brought up 1 CPUs [ 0.136619] SMP: Total of 1 processors activated. [ 0.136635] CPU: All CPU(s) started in SVC mode. [ 0.141022] devtmpfs: initialized [ 0.156487] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.173025] ------------[ cut here ]------------ [ 0.173082] WARNING: CPU: 0 PID: 1 at ../../arch/arm/mach-omap2/omap_hwmod.c:2438 _init+0x338/0x37c() [ 0.173098] omap_hwmod: spinlock: doesn't have mpu register target base [ 0.173112] Modules linked in: [ 0.173144] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc7-next-20131030 #1 [ 0.173198] [<c001bbec>] (unwind_backtrace+0x0/0xec) from [<c0017c6c>] (show_stack+0x10/0x14) [ 0.173240] [<c0017c6c>] (show_stack+0x10/0x14) from [<c052cd98>] (dump_stack+0x7c/0x94) [ 0.173275] [<c052cd98>] (dump_stack+0x7c/0x94) from [<c00463fc>] (warn_slowpath_common+0x6c/0x90) [ 0.173304] [<c00463fc>] (warn_slowpath_common+0x6c/0x90) from [<c0046450>] (warn_slowpath_fmt+0x30/0x40) [ 0.173330] [<c0046450>] (warn_slowpath_fmt+0x30/0x40) from [<c0789970>] (_init+0x338/0x37c) [ 0.173357] [<c0789970>] (_init+0x338/0x37c) from [<c0789e88>] (__omap_hwmod_setup_all+0x40/0x8c) [ 0.173386] [<c0789e88>] (__omap_hwmod_setup_all+0x40/0x8c) from [<c0008920>] (do_one_initcall+0xf0/0x154) [ 0.173419] [<c0008920>] (do_one_initcall+0xf0/0x154) from [<c077dbdc>] (kernel_init_freeable+0x104/0x1c8) [ 0.173446] [<c077dbdc>] (kernel_init_freeable+0x104/0x1c8) from [<c05266a4>] (kernel_init+0x8/0x118) [ 0.173483] [<c05266a4>] (kernel_init+0x8/0x118) from [<c0013ca8>] (ret_from_fork+0x14/0x2c) [ 0.173662] ---[ end trace 3406ff24bd97382e ]---~$off

========================================================================

Board cubox failure log: -------------------------------------------------

[ 0.084351] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.085542] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 7, base_baud = 10416666) is a 16550A [ 0.509279] console [ttyS0] enabled [ 0.513714] brd: module loaded [ 0.520113] loop: module loaded [ 0.523744] sata_mv f10a0000.sata-host: slots 32 ports 1 [ 0.530000] scsi0 : sata_mv [ 0.533074] ata1: SATA max UDMA/133 irq 94 [ 0.538683] m25p80 spi0.0: found n25q032, expected w25q32 [ 0.544066] m25p80 spi0.0: n25q032 (4096 Kbytes) [ 0.549871] libphy: orion_mdio_bus: probed [ 0.554546] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 0.562386] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:38:27:22 [ 0.571164] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.577668] ehci-pci: EHCI PCI platform driver [ 0.582204] ehci-orion: EHCI orion driver [ 0.586284] orion-ehci f1050000.usb-host: EHCI Host Controller [ 0.592102] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 0.600684] orion-ehci f1050000.usb-host: irq 47, io mem 0xf1050000 [ 0.624150] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 0.631140] hub 1-0:1.0: USB hub found [ 0.634908] hub 1-0:1.0: 1 port detected [ 0.639010] orion-ehci f1051000.usb-host: EHCI Host Controller [ 0.644851] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 0.652884] orion-ehci f1051000.usb-host: irq 48, io mem 0xf1051000 [ 0.674145] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 0.681077] hub 2-0:1.0: USB hub found [ 0.684848] hub 2-0:1.0: 1 port detected [ 0.689326] usbcore: registered new interface driver usb-storage [ 0.695606] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 0.704199] i2c /dev entries driver [ 0.712974] sdhci: Secure Digital Host Controller Interface driver [ 0.719140] sdhci: Copyright(c) Pierre Ossman [ 0.723472] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.729267] sdhci-dove f1092000.sdio-host: dummy supplies not allowed [ 0.735690] mmc0: no vqmmc regulator found [ 0.739773] sdhci-dove f1092000.sdio-host: dummy supplies not allowed [ 0.746187] mmc0: no vmmc regulator found [ 0.784144] mmc0: SDHCI controller on f1092000.sdio-host [f1092000.sdio-host] using DMA ~$off