Tree/Branch: next Git describe: next-20140514 Failed boot tests (console logs at the end) =========================================== omap5-uevm: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS
arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.7 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 47.9 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 1.6 sec: PASS legacy,3530beagle 0 min 52.5 sec: PASS (Warnings: 1) omap4-panda 1 min 6.9 sec: PASS omap3-overo-tobi 0 min 22.9 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 22.2 sec: PASS omap5-uevm 1 min 5.1 sec: PASS omap3-n900 0 min 17.3 sec: PASS (Warnings: 1) legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 5.8 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.1 sec: PASS ste-snowball 1 min 21.1 sec: PASS tegra30-beaver 0 min 19.7 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 51.7 sec: PASS sun7i-a20-cubieboard2 0 min 39.6 sec: FAIL armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 53.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 44.4 sec: FAIL bcm28155-ap 0 min 28.1 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 20.8 sec: PASS omap5-uevm 1 min 40.2 sec: PASS omap3-n900 0 min 14.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.5 sec: PASS omap4-panda-es 0 min 58.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 38.7 sec: FAIL sun4i-a10-cubieboard 0 min 43.0 sec: FAIL
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.9 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.1 sec: PASS exynos5250-arndale 0 min 31.2 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 0 min 33.3 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.9 sec: PASS armada-370-mirabox 0 min 20.7 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.2 sec: PASS
Console logs for failures =========================
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ----------------------------------------
omap5-uevm: OFFLINE: last 40 lines of boot log: -----------------------------------------------
Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/056 2 ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE
sun7i-a20-cubieboard2: OFFLINE: last 40 lines of boot log: ----------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE
arm-multi_v7_defconfig ----------------------
sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: -------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-vRN4XS/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-vRN4XS/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-vRN4XS/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x47c130 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.62 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-nuDuy8/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-nuDuy8/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-nuDuy8/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x47c130 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.44 seconds. # PYBOOT: Result: FAIL
arm-sunxi_defconfig -------------------
sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: -------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i#tftp 0x42000000 192.168.1.2:tmp/cubie2-x6O6E1/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-x6O6E1/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-x6O6E1/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x1c4c38 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 38.73 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-pTYUsG/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-pTYUsG/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-pTYUsG/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1c4c38 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.05 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org
-
Kevin's boot bot