arndale : passed 0:58.43 bbb : passed 1:54.67 beaver : passed 1:02.55 multi-beaver : passed 0:30.66 cubie2 : passed 1:11.11 cubie : passed 1:00.73 cubox : passed 0:48.55 panda : passed 0:56.84 multi-panda : passed 0:47.18 sama5 : FAILED 0:44.55 snowball : passed 0:55.36 multi-snowball : passed 0:57.93 multi-trimslice : passed 0:34.85 wandboard : passed 1:01.20 multi-wandboard : passed 0:41.36
Board legend:
Board : System SoC Defconfig
arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board sama5 failure log: -------------------------------------------------
U-Boot> setenv autoboot no setenv autoboot no U-Boot> printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw debug bootcmd=nand read 0x21000000 0x00180000 0x0000509E; nand read 0x22000000 0x00200000 0x00281428; bootm 0x22000000 - 0x21000000 bootdelay=6 bootfile=next-thierry/next-20131011/uImage.sama5 eth1addr=08:00:08:e1:88:0e ethact=gmacb0 ethprime=gmacb0 ipaddr=172.16.1.199 legacy_bootargs=console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs serverip=172.16.1.4 stderr=serial stdin=serial stdout=serial
Environment size: 609/131067 bytes U-Boot> setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw' setenv bootargs 'console=ttyS0,1152node: sama5 status: on 00 root=/dev/mmcblk0p1 rootwait rw' U-Boot> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> tftpboot 0x22000000 172.16.1.4:/srv/tftp/next-thierry/next-20131011/uImage.sama5 tftpboot 0x22000000 172.16.1.4:/srv/tftp/next-thierry/next-20131011/uImage.sama5 gmacb0: PHY present at 1 gmacb0: link up, 1000Mbps full-duplex (lpa: 0x0300) Using gmacb0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.199 Filename '/srv/tftp/next-thierry/next-20131011/uImage.sama5'. Load address: 0x22000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot> ~$off
kernel-build-reports@lists.linaro.org