Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160427/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:53.77 bbb arm-omap2plus_defconfig : FAILED 1:53.88 bbb arm-multi_v7_defconfig : FAILED 1:52.85 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:08.17 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.91 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.53 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:46.42 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:55.54 beaver arm-tegra_defconfig : FAILED 1:47.72 beaver arm-multi_v7_defconfig : FAILED 1:46.96 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.37 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.24 cosmic arm-multi_v7_defconfig : FAILED 2:06.80 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:17.09 dalmore arm-tegra_defconfig : FAILED 1:54.64 dalmore arm-multi_v7_defconfig : FAILED 1:55.69 dalmore arm-multi_lpae_defconfig : FAILED 2:05.87 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.95 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.96 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.09 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.99 omap5uevm arm-multi_lpae_defconfig : FAILED 2:25.37 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:08.77 pi arm-multi_v7_defconfig : FAILED 1:58.11 pi arm-multi_lpae_defconfig : FAILED 2:06.97 seaboard arm-tegra_defconfig : FAILED 1:56.42 seaboard arm-multi_v7_defconfig : FAILED 2:07.43 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:50.66 snow arm-multi_v7_nosmp_defconfig : FAILED 0:47.69 snowball arm-u8500_defconfig : FAILED 1:56.62 snowball arm-multi_v7_defconfig : FAILED 2:21.02 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.64 wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.29
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:14.25 arndale arm-exynos_defconfig : passed 1:30.12 arndale arm-multi_v7_defconfig : passed 1:19.30 arndale arm-multi_lpae_defconfig : passed 1:29.13 capri arm-bcm_defconfig : passed 0:43.87 capri arm-multi_v7_defconfig : passed 1:08.34 capri arm-multi_v7_nosmp_defconfig : warnings 0:52.67 chitra powerpc-pasemi_defconfig : passed 1:58.68 chitra powerpc-ppc64_defconfig : passed 2:03.98 colombus arm-sunxi_defconfig : passed 1:03.48 colombus arm-multi_v7_defconfig : passed 1:34.75 colombus arm-multi_lpae_defconfig : passed 1:19.39 colombus arm-multi_v7_nosmp_defconfig : warnings 3:26.89 cubie arm-sunxi_defconfig : passed 1:00.74 cubie arm-multi_v7_defconfig : passed 0:51.02 cubie arm-multi_v7_nosmp_defconfig : passed 0:57.29 cubie2 arm-sunxi_defconfig : passed 0:41.74 cubie2 arm-multi_v7_defconfig : passed 0:49.16 cubie2 arm-multi_lpae_defconfig : passed 0:46.92 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:04.71 cubox arm-multi_v7_defconfig : passed 1:11.26 cubox arm-mvebu_v7_defconfig : passed 1:19.77 cubox arm-multi_v7_nosmp_defconfig : passed 1:00.99 hummingboard arm-imx_v6_v7_defconfig : passed 1:10.42 hummingboard arm-multi_v7_defconfig : passed 1:17.28 hummingboard arm-multi_v7_nosmp_defconfig : warnings 0:59.36 jetsontk1 arm-tegra_defconfig : warnings 0:50.71 jetsontk1 arm-multi_v7_defconfig : warnings 0:48.20 jetsontk1 arm-multi_lpae_defconfig : warnings 0:55.87 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.48 pandaes arm-omap2plus_defconfig : warnings 1:46.52 pandaes arm-multi_v7_defconfig : passed 1:45.03 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:00.17 pi arm-exynos_defconfig : passed 2:12.51 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.36 pit arm-exynos_defconfig : passed 2:13.11 pit arm-multi_v7_defconfig : passed 2:16.36 pit arm-multi_lpae_defconfig : passed 2:30.21 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.22 seattle arm64-defconfig : passed 2:29.02 snow arm-exynos_defconfig : passed 2:05.59 snow arm-multi_v7_defconfig : passed 2:09.29 snow arm-multi_lpae_defconfig : passed 2:29.98 trimslice arm-tegra_defconfig : warnings 1:37.57 trimslice arm-multi_v7_defconfig : warnings 3:11.47 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:39.23 wandboard arm-multi_v7_defconfig : passed 0:56.09 wandboard arm-multi_v7_nosmp_defconfig : warnings 0:41.81
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.43 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:19.67 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.48 parallella arm-multi_v7_defconfig : OFFLINE 2:41.93 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.34 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:55.45 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:01.58 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.38 sama5 arm-sama5_defconfig : OFFLINE 2:19.78 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:40.03 socfpga arm-socfpga_defconfig : OFFLINE 2:19.87 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.71 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.89
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 Booting Linux on physical CPU 0x0 [c103aed8] *pgd=4100041e(bad) Linux version 4.6.0-rc5-next-20160427 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Tue Apr 26 23:42:52 PDT 2016 CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d Modules linked in: CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Insignal Arndale evaluation board based on EXYNOS5250 cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc358, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-next-20160427 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030e930>] (unwind_backtrace) from [<c030b49c>] (show_stack+0x10/0x14) [<c030b49c>] (show_stack) from [<c0335ec4>] (__warn+0xe4/0xfc) [<c0335ec4>] (__warn) from [<c0335f14>] (warn_slowpath_fmt+0x38/0x48) [<c0335f14>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x978) [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x374) [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) ---[ end trace cb88537fdc8fa200 ]---
[PYBOOT] [arndale 02:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:52]: got exception: timeout ~$off
[PYBOOT] [arndale 02:53]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.559747] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.626201] Synopsys Designware Multimedia Card Interface Driver [ 1.634018] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.643895] ledtrig-cpu: registered to indicate activity on CPUs [ 1.651113] usbcore: registered new interface driver usbhid [ 1.657040] usbhid: USB HID core driver [ 1.668950] NET: Registered protocol family 10 [ 1.675474] sit: IPv6 over IPv4 tunneling driver [ 1.681598] NET: Registered protocol family 17 [ 1.686363] can: controller area network core (rev 20120528 abi 9) [ 1.693012] NET: Registered protocol family 29 [ 1.697724] can: raw protocol (rev 20120528) [ 1.702244] can: broadcast manager protocol (rev 20120528 t) [ 1.708241] can: netlink gateway (rev 20130117) max_hops=1 [ 1.715012] Key type dns_resolver registered [ 1.719876] omap_voltage_late_init: Voltage driver support not added [ 1.726836] ThumbEE CPU extension supported. [ 1.731389] Registering SWP/SWPB emulation handler [ 1.776339] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.782895] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.790641] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.799354] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.807293] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.815175] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.822985] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830344] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.837388] hctosys: unable to open rtc device (rtc0) [ 1.850808] Waiting for root device /dev/mmcblk0p2... [ 1.856580] mmc1: new high speed MMC card at address 0001 [ 1.863371] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.868673] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.875341] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.883955] mmcblk1: p1 p2
[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:51]: got exception: timeout ~$off
[PYBOOT] [bbb 01:52]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:06]: got exception: timeout ~$off
[PYBOOT] [bbb 02:07]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.075029] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.081148] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.087475] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.094350] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.103942] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.113441] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.120455] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.163738] ledtrig-cpu: registered to indicate activity on CPUs [ 2.172435] oprofile: using arm/armv7 [ 2.177441] Initializing XFRM netlink socket [ 2.182569] NET: Registered protocol family 10 [ 2.193332] sit: IPv6 over IPv4 tunneling driver [ 2.202195] NET: Registered protocol family 17 [ 2.207128] NET: Registered protocol family 15 [ 2.212362] Key type dns_resolver registered [ 2.217207] omap_voltage_late_init: Voltage driver support not added [ 2.223947] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.232412] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.242025] ThumbEE CPU extension supported. [ 2.246654] Registering SWP/SWPB emulation handler [ 2.251674] SmartReflex Class3 initialized [ 2.325274] mmc1: new high speed MMC card at address 0001 [ 2.337381] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.344822] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.353106] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.360235] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.372419] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.379759] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.390621] hctosys: unable to open rtc device (rtc0) [ 2.396058] sr_init: No PMIC hook to init smartreflex [ 2.401739] sr_init: platform driver register failed for SR [ 2.446668] mmcblk1: p1 p2 [ 2.464920] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.185680] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.200459] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.207530] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.230241] rtc-ds1307 2-006f: SET TIME! [ 2.235959] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.242708] rtc-ds1307 2-006f: 64 bytes nvram [ 2.247319] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.255525] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.261303] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.269545] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.278705] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.285569] hub 1-0:1.0: USB hub found [ 2.289522] hub 1-0:1.0: 1 port detected [ 2.293924] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.299695] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.307804] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.316828] hub 2-0:1.0: USB hub found [ 2.320798] hub 2-0:1.0: 1 port detected [ 2.326902] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.391375] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.409609] aic_dvdd_fixed: disabling [ 2.414308] Waiting for root device /dev/mmcblk0p1... [ 2.441813] mmc1: new high speed MMC card at address 0001 [ 2.447843] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.452751] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.459108] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.466021] mmcblk1: p1 [ 2.599745] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.634775] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.659962] hub 2-1:1.0: USB hub found [ 2.663930] hub 2-1:1.0: 4 ports detected [ 2.755939] hub 1-1:1.0: USB hub found [ 2.759919] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.190614] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.205373] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.212441] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.235218] rtc-ds1307 2-006f: SET TIME! [ 2.240945] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.247678] rtc-ds1307 2-006f: 64 bytes nvram [ 2.252284] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.260487] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.266256] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.274485] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.283629] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.290496] hub 1-0:1.0: USB hub found [ 2.294442] hub 1-0:1.0: 1 port detected [ 2.298836] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.304607] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.312702] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.321720] hub 2-0:1.0: USB hub found [ 2.325683] hub 2-0:1.0: 1 port detected [ 2.331792] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.396349] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.414572] aic_dvdd_fixed: disabling [ 2.419262] Waiting for root device /dev/mmcblk0p1... [ 2.446785] mmc1: new high speed MMC card at address 0001 [ 2.452803] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.457698] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.464053] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.470964] mmcblk1: p1 [ 2.604725] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.639755] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.664887] hub 2-1:1.0: USB hub found [ 2.668852] hub 2-1:1.0: 4 ports detected [ 2.760837] hub 1-1:1.0: USB hub found [ 2.764821] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:53]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.228111] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.234407] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.241299] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.251681] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.256541] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.262840] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.269698] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.279289] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.288782] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.295821] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.337329] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.343624] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.350493] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.360076] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.369564] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.376609] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.382729] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.389036] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.395877] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.405457] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.414950] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.421980] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.467538] hctosys: unable to open rtc device (rtc0) [ 4.472843] sr_init: No PMIC hook to init smartreflex [ 4.478395] sr_init: platform driver register failed for SR [ 4.525982] aic_dvdd_fixed: disabling [ 4.530210] ldousb: disabling [ 4.533460] mmc1: new high speed MMC card at address 0001 [ 4.541666] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.547225] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.554003] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.562524] mmcblk1: p1 [ 4.570134] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.293178] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.300135] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.306655] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.313514] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.319098] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.326195] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.336195] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.347032] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.353673] [drm] No driver support for vblank timestamp query. [ 3.359621] drm drm: No connectors reported connected with modes [ 3.365631] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.391755] Console: switching to colour frame buffer device 128x48 [ 3.403797] drm drm: fb0: frame buffer device [ 3.418843] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.429613] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.436078] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.441487] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.449318] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.463851] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.471095] hub 1-0:1.0: USB hub found [ 3.474868] hub 1-0:1.0: 1 port detected [ 3.479785] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.485196] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.492932] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.508855] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.516000] hub 2-0:1.0: USB hub found [ 3.519772] hub 2-0:1.0: 1 port detected [ 3.528209] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.541873] vdd_sata,avdd_plle: disabling [ 3.546283] usb1_vbus: disabling [ 3.550351] Waiting for root device /dev/mmcblk0p1... [ 3.833850] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.779284] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:45]: got exception: timeout ~$off
[PYBOOT] [beaver 01:46]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:00.0: enabling device (0140 -> 0143) r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. drm drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci 7d004000.usb: EHCI Host Controller tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) vdd_sata,avdd_plle: disabling usb1_vbus: disabling Waiting for root device /dev/mmcblk0p1... usb 2-1: new high-speed USB device number 2 using tegra-ehci asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:47]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.087037] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 6.093997] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.099602] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.107152] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.117154] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.130055] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.136692] [drm] No driver support for vblank timestamp query. [ 6.142688] drm drm: No connectors reported connected with modes [ 6.148712] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.174325] Console: switching to colour frame buffer device 128x48 [ 6.186122] drm drm: fb0: frame buffer device [ 6.213606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.222890] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.229366] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.234798] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.242771] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.263605] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.271326] hub 1-0:1.0: USB hub found [ 6.275124] hub 1-0:1.0: 1 port detected [ 6.279941] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.285386] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.293255] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.313600] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.321187] hub 2-0:1.0: USB hub found [ 6.324974] hub 2-0:1.0: 1 port detected [ 6.333237] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.352045] vdd_sata,avdd_plle: disabling [ 6.356549] usb1_vbus: disabling [ 6.359959] ALSA device list: [ 6.362916] #0: NVIDIA Tegra Beaver [ 6.367152] Waiting for root device /dev/mmcblk0p1... [ 6.643605] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.629052] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:47]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.638455] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.712486] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.722802] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.796886] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.807203] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.881235] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.891553] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.965639] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.975959] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 35.050016] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 35.060333] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 39.134421] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.144738] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.218816] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.229126] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.303151] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.313464] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.387541] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.397853] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.471885] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.482197] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.556284] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.566638] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.640668] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.650985] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.725067] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.735382] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.809459] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.819779] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.893816] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.904133] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.978213] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.988532] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.057747] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.131727] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.141808] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.215783] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.225858] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.299832] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.309909] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.383894] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.393978] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.467965] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.478048] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.552060] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.562128] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.636110] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.646180] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.720160] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.730232] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.804211] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.814283] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.888262] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.898334] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.972312] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.982384] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.056363] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.066435] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.140411] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.150487] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.224462] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.234538] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.308518] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.318598] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.392582] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.402658] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:04]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:05]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:15]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:16]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.785783] can: netlink gateway (rev 20130117) max_hops=1 [ 2.792733] Key type dns_resolver registered [ 2.799095] ThumbEE CPU extension supported. [ 2.803490] Registering SWP/SWPB emulation handler [ 2.826053] usb1_vbus: supplied by vdd-sys-5v0 [ 2.836461] usb2_vbus: supplied by vdd-sys-5v0 [ 2.853876] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.877340] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.884105] [drm] No driver support for vblank timestamp query. [ 2.890964] mmc1: new high speed MMC card at address 0001 [ 2.900253] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.906878] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.915344] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.923889] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.935567] mmcblk1: p1 [ 3.064775] Console: switching to colour frame buffer device 240x75 [ 3.152121] drm drm: fb0: frame buffer device [ 3.171631] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.186887] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.192477] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.201019] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.216607] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.227151] hub 1-0:1.0: USB hub found [ 3.231153] hub 1-0:1.0: 1 port detected [ 3.241865] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.256595] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.318653] dvdd_ts: disabling [ 3.321912] usb1_vbus: disabling [ 3.325173] vdd_cam_1v8_reg: disabling [ 3.332969] Waiting for root device /dev/mmcblk0p1... [ 3.541648] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.519228] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.762961] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.788446] can: netlink gateway (rev 20130117) max_hops=1 [ 2.795412] Key type dns_resolver registered [ 2.801865] ThumbEE CPU extension supported. [ 2.806254] Registering SWP/SWPB emulation handler [ 2.824370] usb1_vbus: supplied by vdd-sys-5v0 [ 2.834367] usb2_vbus: supplied by vdd-sys-5v0 [ 2.853230] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.874114] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.880873] [drm] No driver support for vblank timestamp query. [ 2.907455] mmc1: new high speed MMC card at address 0001 [ 2.917391] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.925464] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.935057] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.943614] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.953188] mmcblk1: p1 [ 3.058952] Console: switching to colour frame buffer device 240x75 [ 3.146444] drm drm: fb0: frame buffer device [ 3.166353] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.181530] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.187115] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.195952] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.211380] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.220714] hub 1-0:1.0: USB hub found [ 3.224750] hub 1-0:1.0: 1 port detected [ 3.235388] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.250323] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.313345] dvdd_ts: disabling [ 3.316568] usb1_vbus: disabling [ 3.319826] vdd_cam_1v8_reg: disabling [ 3.327326] Waiting for root device /dev/mmcblk0p1... [ 3.536386] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.520017] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.531344] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1: p1 input: gpio-keys as /devices/soc0/gpio-keys/input/input0 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.465182] Bluetooth: RFCOMM socket layer initialized [ 5.470404] Bluetooth: RFCOMM ver 1.11 [ 5.474222] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.479707] Bluetooth: BNEP socket layer initialized [ 5.484761] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.490761] Bluetooth: HIDP socket layer initialized [ 5.497088] Key type dns_resolver registered [ 5.506577] Registering SWP/SWPB emulation handler [ 5.525257] usb1_vbus: supplied by vdd-sys-5v0 [ 5.534722] usb2_vbus: supplied by vdd-sys-5v0 [ 5.551616] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.580879] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.587684] [drm] No driver support for vblank timestamp query. [ 5.764575] Console: switching to colour frame buffer device 240x75 [ 5.851047] drm drm: fb0: frame buffer device [ 5.884816] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.893948] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.899806] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.908950] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.934860] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.948902] hub 1-0:1.0: USB hub found [ 5.952933] hub 1-0:1.0: 1 port detected [ 5.966823] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.980772] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.067828] dvdd_ts: disabling [ 6.070935] usb1_vbus: disabling [ 6.074200] vdd_cam_1v8_reg: disabling [ 6.078909] ALSA device list: [ 6.081902] #0: NVIDIA Tegra Dalmore [ 6.087802] Waiting for root device /dev/mmcblk0p1... [ 6.274856] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.309441] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.254819] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.714688] Key type dns_resolver registered [ 1.720018] Registering SWP/SWPB emulation handler [ 1.728845] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.731591] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.738988] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.746161] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.752738] [drm] No driver support for vblank timestamp query. [ 1.758647] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.764977] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.770217] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.781682] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.782797] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.790887] hub 1-3:1.0: USB hub found [ 1.793792] hub 1-3:1.0: 3 ports detected [ 1.797696] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.801751] max98090 1-0010: MAX98090 REVID=0x43 [ 1.804010] max98090 1-0010: use default 2.8v micbias [ 1.817357] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.827070] mmc1: new DDR MMC card at address 0001 [ 1.830964] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.838465] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.843013] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.849365] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.855146] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.860960] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.867618] mmcblk1: p1 p2 [ 1.887384] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.908478] VDD10_HDMI_1.0V: disabling [ 1.909177] vdd_g3d: disabling [ 1.910244] BUCK8_2.8V: disabling [ 1.914d99] ALSA device list: [ 1.915867] #0: Odroid-U3 [ 1.919672] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.857040] omap_vp_init: No PMIC info for vdd_mpu [ 1.862133] Power Management for TI OMAP4+ devices. [ 1.867356] ThumbEE CPU extension supported. [ 1.871850] Registering SWP/SWPB emulation handler [ 1.881955] palmas 0-0048: Irq flag is 0x00000000 [ 1.906277] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.916972] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.931747] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.941739] mmc0: new high speed MMC card at address 0001 [ 1.947740] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.952661] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.959006] smps9: Bringing 0uV into 2100000-2100000uV [ 1.964432] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973452] ldo1: Bringing 0uV into 1500000-1500000uV [ 1.980099] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988055] ldo4: Bringing 0uV into 1500000-1500000uV [ 1.999281] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006923] smsc95xx v1.0.4 [ 2.010233] ldo9: failed to get the current voltage(-22) [ 2.015815] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.028890] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.039875] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057925] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 16:9b:01:e4:f3:a1 [ 2.070434] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076845] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.100400] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:37 UTC (946684957) [ 2.116151] pbias_mmc_omap5: disabling [ 2.120105] vmmcsdio_fixed: disabling [ 2.124656] Waiting for root device /dev/mmcblk1p2... [ 2.298548] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.434352] hub 1-2:1.0: USB hub found [ 2.438369] hub 1-2:1.0: 3 ports detected [ 2.444247] omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:22]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:23]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:24]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.856938] omap_vp_init: No PMIC info for vdd_mpu [ 1.862033] Power Management for TI OMAP4+ devices. [ 1.867265] ThumbEE CPU extension supported. [ 1.871760] Registering SWP/SWPB emulation handler [ 1.881891] palmas 0-0048: Irq flag is 0x00000000 [ 1.906255] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.917102] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.931803] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.941869] mmc0: new high speed MMC card at address 0001 [ 1.947900] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.952680] smps9: Bringing 0uV into 2100000-2100000uV [ 1.958204] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.964560] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973317] ldo1: Bringing 0uV into 1500000-1500000uV [ 1.979952] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987931] ldo4: Bringing 0uV into 1500000-1500000uV [ 1.999152] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006848] smsc95xx v1.0.4 [ 2.010151] ldo9: failed to get the current voltage(-22) [ 2.015740] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.028817] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.039864] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057838] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:b2:b8:0a:e7:52 [ 2.070416] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076838] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.100388] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.116116] pbias_mmc_omap5: disabling [ 2.120067] vmmcsdio_fixed: disabling [ 2.124618] Waiting for root device /dev/mmcblk1p2... [ 2.298508] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.434391] hub 1-2:1.0: USB hub found [ 2.438408] hub 1-2:1.0: 3 ports detected [ 2.444340] omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
Power Management for TI OMAP4+ devices. ThumbEE CPU extension supported. usb 1-3: new high-speed USB device number 2 using ehci-omap palmas 0-0048: Irq flag is 0x00000000 palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 smps6: Bringing 1350000uV into 1200000-1200000uV smps9: Bringing 0uV into 2100000-2100000uV mmc0: new high speed MMC card at address 0001 mmcblk0: mmc0:0001 SEM04G 3.69 GiB mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB ldo1: Bringing 0uV into 1500000-1500000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1500000-1500000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: failed to get the current voltage(-22) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:04:57 UTC (946685097) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fa:16:01:5a:25:08 omap-dwc3 4a020000.omap_dwc3: vbus init failed Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.893762] ldo1: Bringing 0uV into 1500000-1500000uV [ 3.901760] ldo2: Bringing 0uV into 2800000-2800000uV [ 3.912019] ldo4: Bringing 0uV into 1500000-1500000uV [ 3.926726] ldo7: Bringing 0uV into 2000000-2000000uV [ 3.937229] ldo9: failed to get the current voltage(-22) [ 3.942821] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.962866] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 3.974456] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.982020] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.988602] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.994892] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.001751] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.011339] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.020834] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.027890] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.034002] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.040306] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.047142] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.056722] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.066221] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.073258] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.118221] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.124515] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.131383] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.140970] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.150460] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.157501] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.165334] hctosys: unable to open rtc device (rtc0) [ 4.170661] sr_init: No PMIC hook to init smartreflex [ 4.176138] sr_init: platform driver register failed for SR [ 4.204747] pbias_mmc_omap5: disabling [ 4.208712] vmmcsdio_fixed: disabling [ 4.214724] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.517510] isl29018 7-0044: No cache defaults, reading back from HW [ 1.523865] isl29018 7-0044: Failed to read 1: -6 [ 1.528449] isl29018 7-0044: regmap initialization fails: -6 [ 1.538842] NET: Registered protocol family 10 [ 1.543275] sit: IPv6 over IPv4 tunneling driver [ 1.546857] NET: Registered protocol family 17 [ 1.550861] can: controller area network core (rev 20120528 abi 9) [ 1.557052] NET: Registered protocol family 29 [ 1.561439] can: raw protocol (rev 20120528) [ 1.565689] can: broadcast manager protocol (rev 20120528 t) [ 1.571330] can: netlink gateway (rev 20130117) max_hops=1 [ 1.577046] Key type dns_resolver registered [ 1.581375] ThumbEE CPU extension supported. [ 1.585280] Registering SWP/SWPB emulation handler [ 1.595143] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.600633] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.606992] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.612367] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.622439] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632798] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.638237] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.648428] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654608] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.659986] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.669706] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691977] Waiting for root device /dev/mmcblk0p1... [ 1.695857] mmc0: tuning execution failed: -5 [ 1.699888] mmc0: error -5 whilst initialising MMC card [ 2.567557] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.581678] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.587139] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.593511] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.598895] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:05]: got exception: timeout ~$off
[PYBOOT] [pi 02:06]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.517487] isl29018 7-0044: No cache defaults, reading back from HW [ 1.523842] isl29018 7-0044: Failed to read 1: -6 [ 1.528427] isl29018 7-0044: regmap initialization fails: -6 [ 1.538824] NET: Registered protocol family 10 [ 1.543254] sit: IPv6 over IPv4 tunneling driver [ 1.546836] NET: Registered protocol family 17 [ 1.550838] can: controller area network core (rev 20120528 abi 9) [ 1.557028] NET: Registered protocol family 29 [ 1.561416] can: raw protocol (rev 20120528) [ 1.565665] can: broadcast manager protocol (rev 20120528 t) [ 1.571307] can: netlink gateway (rev 20130117) max_hops=1 [ 1.577032] Key type dns_resolver registered [ 1.581355] ThumbEE CPU extension supported. [ 1.585256] Registering SWP/SWPB emulation handler [ 1.595144] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.600625] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.606987] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.612361] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.622430] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632769] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.638215] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.648401] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654585] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.659963] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.669683] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691960] Waiting for root device /dev/mmcblk0p1... [ 1.695840] mmc0: tuning execution failed: -5 [ 1.699873] mmc0: error -5 whilst initialising MMC card [ 2.567547] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.581668] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.587124] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.593497] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.598881] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:56]: got exception: timeout ~$off
[PYBOOT] [pi 01:57]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.911312] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.922487] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.928967] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.934406] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.942908] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.956640] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.963397] hub 3-0:1.0: USB hub found [ 1.967202] hub 3-0:1.0: 1 port detected [ 1.975237] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.981908] [drm] No driver support for vblank timestamp query. [ 2.006897] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.020434] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.023259] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.030399] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.066308] mmc2: switch to bus width 8 failed [ 2.066577] mmc2: switch to bus width 4 failed [ 2.066599] mmc2: new high speed MMC card at address 0001 [ 2.067077] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.067274] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.067454] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.068711] mmcblk2: p3 [ 2.071452] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.076262] mmc0: new SDIO card at address 0001 [ 2.083360] Console: switching to colour frame buffer device 170x48 [ 2.163687] drm drm: fb0: frame buffer device [ 2.181634] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.188234] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.195206] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.208587] vdd_1v5: disabling [ 2.211663] vdd_1v2: disabling [ 2.764824] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.776225] Waiting for root device /dev/mmcblk0p3... [ 58.389379] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:05]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:06]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.454698] can: raw protocol (rev 20120528) [ 4.458965] can: broadcast manager protocol (rev 20120528 t) [ 4.464695] can: netlink gateway (rev 20130117) max_hops=1 [ 4.500314] Bluetooth: RFCOMM socket layer initialized [ 4.505503] Bluetooth: RFCOMM ver 1.11 [ 4.509288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.514718] Bluetooth: BNEP socket layer initialized [ 4.519689] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.525699] Bluetooth: HIDP socket layer initialized [ 4.531749] Key type dns_resolver registered [ 4.538195] Registering SWP/SWPB emulation handler [ 4.560189] VDDIO_HDMI: supplied by vdd_5v0 [ 4.567115] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.581361] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.586884] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.595393] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.620002] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.631641] hub 3-0:1.0: USB hub found [ 4.635518] hub 3-0:1.0: 1 port detected [ 4.654418] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.661085] [drm] No driver support for vblank timestamp query. [ 4.723231] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.770678] Console: switching to colour frame buffer device 170x48 [ 4.819041] drm drm: fb0: frame buffer device [ 4.849934] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.857107] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.886778] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.906248] vdd_1v5: disabling [ 4.909301] vdd_1v2: disabling [ 4.912469] ALSA device list: [ 4.915429] #0: NVIDIA Tegra Seaboard [ 4.919974] Waiting for root device /dev/mmcblk0p3... [ 61.665947] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:55]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
snow login: root root Password: root Unable to handle kernel paging request at virtual address ee770000 pgd = c0204000 [ee770000] *pgd=6e60041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160427 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xee770000 LR is at cpu_init+0x14/0x54 pc : [<ee770000>] lr : [<c0309fa0>] psr: 000001d3 sp : c1001f50 ip : 00000000 fp : 00000000 r10: c1035b18 r9 : c1005f30 r8 : 676af4b2 r7 : 00000001 r6 : c10b4100 r5 : ee770000 r4 : c1136b8c r3 : c030d820 r2 : 00cf9974 r1 : 6e07c059 r0 : 00000000 Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6e07c059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f50 to 0xc1002000) 1f40: c10fdfd5 c034e090 00000000 c1035b18 1f60: c100615c c030c590 c1039780 63bee1ae 00000001 c10fdfd5 c10fdfd5 c1000000 1f80: c100212c c10b35a0 c1002134 c10fdfd5 c1001fa4 c0a962a4 ffffffff c1000000 1fa0: c1001fac c0a964a4 c10b4060 c0357edc 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c11001d4 c10020b4 1fe0: c0f8ba1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c0309fa0>] (cpu_init) from [<c034e090>] (atomic_notifier_call_chain+0x18/0x20) [<c034e090>] (atomic_notifier_call_chain) from [<c030c590>] (__switch_to+0x34/0x64) Code: 00000000 00000000 00000000 00000000 (ed41f738) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 00:46]: got exception: panic ~$off
[PYBOOT] [snow 00:47]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.974792] can: controller area network core (rev 20120528 abi 9) [ 1.981109] NET: Registered protocol family 29 [ 1.985595] can: raw protocol (rev 20120528) [ 1.989868] can: broadcast manager protocol (rev 20120528 t) [ 1.995574] can: netlink gateway (rev 20130117) max_hops=1 [ 2.001892] Key type dns_resolver registered [ 2.006530] ThumbEE CPU extension supported. [ 2.010833] Registering SWP/SWPB emulation handler [ 2.023193] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.030395] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.039916] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.046966] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.054016] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.061035] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.078247] db8500-esram12: disabling [ 2.082061] db8500-esram34: disabling [ 2.086242] V-CSI/DSI: disabling [ 2.089630] mmci-reg: disabling [ 2.094635] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.100677] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.109313] Waiting for root device /dev/mmcblk0p4... [ 2.148925] mmc3: new high speed MMC card at address 0001 [ 2.155273] mmcblk3: mmc3:0001 3.53 GiB [ 2.159729] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.165496] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.171295] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.178192] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:19]: got exception: timeout ~$off
[PYBOOT] [snowball 02:20]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.692016] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.699676] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.733459] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.744476] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.759948] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.770996] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.807708] NET: Registered protocol family 10 [ 2.815490] sit: IPv6 over IPv4 tunneling driver [ 2.823059] NET: Registered protocol family 17 [ 2.827636] NET: Registered protocol family 35 [ 2.832763] NET: Registered protocol family 37 [ 2.837524] Registering SWP/SWPB emulation handler [ 2.857025] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.869506] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-08 03:50:07 UTC (955165807) [ 2.878936] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.885986] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.893005] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.899993] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.914520] db8500-esram12: disabling [ 2.918243] db8500-esram34: disabling [ 2.922241] V-CSI/DSI: disabling [ 2.925506] mmci-reg: disabling [ 2.928802] ALSA device list: [ 2.931823] #0: MOP500-card [ 2.935150] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.941131] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.947357] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.173000] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"
INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes [ 20.253469] mmcblk0: error -110 sending status command, retrying [ 20.261946] mmcblk0: error -110 sending status command, retrying [ 20.270425] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.281803] mmcblk0: error -110 sending status command, retrying y" INIT: Id "1" respawning too[ 20.290486] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.299358] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"[ 20.311038] mmcblk0: error -110 sending status command, retrying
INIT: Id "3" respawning too fast[ 20.321907] mmcblk0: error -110 sending status command, retrying : disabled for 5 minutes [ 20.333147] mmcblk0: error -110 sending status command, aborting [ 20.344364] mmcblk0: error -110 sending status command, retrying [ 20.352846] mmcblk0: error -110 sending status command, retrying [ 20.361318] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.475005] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:55]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:56]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter