Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160504/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:55.78 bbb arm-omap2plus_defconfig : FAILED 1:53.81 bbb arm-multi_v7_defconfig : FAILED 1:55.92 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:39.74 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.00 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.69 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.91 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:44.99 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.48 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.22 cosmic arm-multi_v7_defconfig : FAILED 2:08.03 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:09.59 dalmore arm-tegra_defconfig : FAILED 1:53.77 dalmore arm-multi_v7_defconfig : FAILED 1:56.31 dalmore arm-multi_lpae_defconfig : FAILED 2:21.58 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.52 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:56.68 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.92 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.13 omap5uevm arm-multi_lpae_defconfig : FAILED 2:23.15 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:04.85 pi arm-multi_v7_defconfig : FAILED 1:56.10 pi arm-multi_lpae_defconfig : FAILED 1:56.89 seaboard arm-tegra_defconfig : FAILED 1:53.48 seaboard arm-multi_v7_defconfig : FAILED 2:10.16 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:49.88 snowball arm-u8500_defconfig : FAILED 1:57.39 snowball arm-multi_v7_defconfig : FAILED 2:21.35 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.96
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.76 arndale arm-exynos_defconfig : passed 1:31.69 arndale arm-multi_v7_defconfig : passed 1:24.40 arndale arm-multi_lpae_defconfig : passed 1:34.74 capri arm-bcm_defconfig : passed 0:47.74 capri arm-multi_v7_defconfig : passed 1:02.63 capri arm-multi_v7_nosmp_defconfig : warnings 0:55.72 chitra powerpc-ppc64_defconfig : passed 2:14.57 colombus arm-sunxi_defconfig : passed 2:25.59 colombus arm-multi_v7_defconfig : passed 2:48.92 colombus arm-multi_lpae_defconfig : passed 2:34.75 cubie arm-sunxi_defconfig : passed 0:56.22 cubie arm-multi_v7_defconfig : passed 0:53.11 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.29 cubie2 arm-sunxi_defconfig : passed 0:57.78 cubie2 arm-multi_v7_defconfig : passed 0:55.72 cubie2 arm-multi_lpae_defconfig : passed 1:01.23 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:00.36 cubox arm-multi_v7_defconfig : passed 1:11.51 cubox arm-mvebu_v7_defconfig : passed 1:15.35 cubox arm-multi_v7_nosmp_defconfig : passed 1:06.83 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.48 hummingboard arm-multi_v7_defconfig : passed 1:41.74 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:08.12 jetsontk1 arm-tegra_defconfig : warnings 0:50.88 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.43 jetsontk1 arm-multi_lpae_defconfig : warnings 1:07.77 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:32.19 pandaes arm-omap2plus_defconfig : warnings 1:38.40 pandaes arm-multi_v7_defconfig : passed 1:46.09 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:00.74 pi arm-exynos_defconfig : passed 2:08.53 pi arm-multi_v7_nosmp_defconfig : warnings 2:12.50 pit arm-exynos_defconfig : passed 2:09.91 pit arm-multi_v7_defconfig : passed 2:16.32 pit arm-multi_lpae_defconfig : passed 2:25.10 pit arm-multi_v7_nosmp_defconfig : warnings 2:08.76 seattle arm64-defconfig : passed 2:32.66 snow arm-exynos_defconfig : passed 2:04.40 snow arm-multi_v7_defconfig : passed 2:09.55 snow arm-multi_lpae_defconfig : passed 1:59.90 snow arm-multi_v7_nosmp_defconfig : warnings 1:56.97 trimslice arm-tegra_defconfig : warnings 1:33.38 trimslice arm-multi_v7_defconfig : warnings 2:51.07 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:35.17 wandboard arm-imx_v6_v7_defconfig : passed 1:21.55 wandboard arm-multi_v7_defconfig : passed 1:03.69 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:16.35
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:10.95 beaver arm-multi_v7_defconfig : OFFLINE 2:24.20 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.16 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.98 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.83 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.76 parallella arm-multi_v7_defconfig : OFFLINE 2:48.50 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.68 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:54.58 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:58.47 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.75 sama5 arm-sama5_defconfig : OFFLINE 2:17.17 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:29.54 socfpga arm-socfpga_defconfig : OFFLINE 2:19.37 socfpga arm-multi_v7_defconfig : OFFLINE 3:09.91 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.88
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ahci 122f0000.sata: couldn't get PHY in node sata: -517
Booting Linux on physical CPU 0x0 Linux version 4.6.0-rc6-next-20160504 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Tue May 3 23:48:33 PDT 2016 CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code [c10b35a0] *pgd=4100041e(bad) CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Insignal Arndale evaluation board based on EXYNOS5250 Modules linked in: cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc16c, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-next-20160504 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030e73c>] (unwind_backtrace) from [<c030b2cc>] (show_stack+0x10/0x14) [<c030b2cc>] (show_stack) from [<c0336264>] (__warn+0xe4/0xfc) [<c0336264>] (__warn) from [<c03362b4>] (warn_slowpath_fmt+0x38/0x48) [<c03362b4>] (warn_slowpath_fmt) from [<c0f040a8>] (arm_dt_init_cpu_maps+0xf8/0x134) [<c0f040a8>] (arm_dt_init_cpu_maps) from [<c0f03388>] (setup_arch+0x780/0x944) [<c0f03388>] (setup_arch) from [<c0f00940>] (start_kernel+0x68/0x374) [<c0f00940>] (start_kernel) from [<40208078>] (0x40208078) ---[ end trace cb88537fdc8fa200 ]---
[PYBOOT] [arndale 02:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:54]: got exception: timeout ~$off
[PYBOOT] [arndale 02:55]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.564299] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.630616] Synopsys Designware Multimedia Card Interface Driver [ 1.638420] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.648301] ledtrig-cpu: registered to indicate activity on CPUs [ 1.655546] usbcore: registered new interface driver usbhid [ 1.661463] usbhid: USB HID core driver [ 1.673360] NET: Registered protocol family 10 [ 1.679869] sit: IPv6 over IPv4 tunneling driver [ 1.686003] NET: Registered protocol family 17 [ 1.690759] can: controller area network core (rev 20120528 abi 9) [ 1.697395] NET: Registered protocol family 29 [ 1.702106] can: raw protocol (rev 20120528) [ 1.706615] can: broadcast manager protocol (rev 20120528 t) [ 1.712598] can: netlink gateway (rev 20130117) max_hops=1 [ 1.719366] Key type dns_resolver registered [ 1.724179] omap_voltage_late_init: Voltage driver support not added [ 1.731178] ThumbEE CPU extension supported. [ 1.735721] Registering SWP/SWPB emulation handler [ 1.780585] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.787019] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.794748] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.803343] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811169] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818904] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826626] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.833971] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.841024] hctosys: unable to open rtc device (rtc0) [ 1.854547] Waiting for root device /dev/mmcblk0p2... [ 1.860262] mmc1: new high speed MMC card at address 0001 [ 1.867060] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.872339] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.878993] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.887602] mmcblk1: p1 p2
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:37]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:38]: got exception: timeout ~$off
[PYBOOT] [bbb 02:39]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.040633] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.046752] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.053084] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.059961] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.069556] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.079054] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.086070] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.129364] ledtrig-cpu: registered to indicate activity on CPUs [ 2.138014] oprofile: using arm/armv7 [ 2.142984] Initializing XFRM netlink socket [ 2.148100] NET: Registered protocol family 10 [ 2.158478] sit: IPv6 over IPv4 tunneling driver [ 2.167424] NET: Registered protocol family 17 [ 2.172345] NET: Registered protocol family 15 [ 2.177563] Key type dns_resolver registered [ 2.182419] omap_voltage_late_init: Voltage driver support not added [ 2.189151] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.197619] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.207216] ThumbEE CPU extension supported. [ 2.211840] Registering SWP/SWPB emulation handler [ 2.216859] SmartReflex Class3 initialized [ 2.289021] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.296304] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.305029] mmc1: new high speed MMC card at address 0001 [ 2.320023] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.328250] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.336072] hctosys: unable to open rtc device (rtc0) [ 2.341513] sr_init: No PMIC hook to init smartreflex [ 2.347208] sr_init: platform driver register failed for SR [ 2.385713] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.393963] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.408378] mmcblk1: p1 p2 [ 2.426814] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.165891] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.180619] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.187694] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.210405] rtc-ds1307 2-006f: SET TIME! [ 2.216128] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.222882] rtc-ds1307 2-006f: 64 bytes nvram [ 2.227491] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.235727] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.241515] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.249760] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.258926] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.265797] hub 1-0:1.0: USB hub found [ 2.269750] hub 1-0:1.0: 1 port detected [ 2.274155] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.279939] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.288047] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.297056] hub 2-0:1.0: USB hub found [ 2.301023] hub 2-0:1.0: 1 port detected [ 2.307137] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.371411] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.389536] aic_dvdd_fixed: disabling [ 2.394235] Waiting for root device /dev/mmcblk0p1... [ 2.426985] mmc1: new high speed MMC card at address 0001 [ 2.433016] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.437924] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.444286] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.451230] mmcblk1: p1 [ 2.579912] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.736191] hub 1-1:1.0: USB hub found [ 2.740185] hub 1-1:1.0: 4 ports detected [ 2.819943] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.848191] hub 2-1:1.0: USB hub found [ 2.852177] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.166906] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.181716] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.188796] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215464] rtc-ds1307 2-006f: SET TIME! [ 2.221200] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.227963] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232583] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.240838] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246622] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.254862] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.264036] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.270916] hub 1-0:1.0: USB hub found [ 2.274874] hub 1-0:1.0: 1 port detected [ 2.279280] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.285062] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.293176] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302170] hub 2-0:1.0: USB hub found [ 2.306140] hub 2-0:1.0: 1 port detected [ 2.312230] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376498] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394187] aic_dvdd_fixed: disabling [ 2.398889] Waiting for root device /dev/mmcblk0p1... [ 2.422048] mmc1: new high speed MMC card at address 0001 [ 2.428078] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.432986] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.439346] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446267] mmcblk1: p1 [ 2.584969] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741313] hub 1-1:1.0: USB hub found [ 2.745302] hub 1-1:1.0: 4 ports detected [ 2.825001] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853302] hub 2-1:1.0: USB hub found [ 2.857285] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.269869] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.276169] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.283064] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.293461] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.298328] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.304624] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.311491] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.321091] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.330585] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.337657] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.387394] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.393697] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.400570] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.410169] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.419666] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.426709] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.432829] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.439148] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.445996] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.455590] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.465096] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.472145] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.517674] hctosys: unable to open rtc device (rtc0) [ 4.522968] sr_init: No PMIC hook to init smartreflex [ 4.528490] sr_init: platform driver register failed for SR [ 4.573674] aic_dvdd_fixed: disabling [ 4.578871] ldousb: disabling [ 4.585139] Waiting for root device /dev/mmcblk0p1... [ 4.629000] mmc1: new high speed MMC card at address 0001 [ 4.636900] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.642281] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.649080] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.657519] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
eth0: device MAC address f6:91:db:af:a3:da RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/f6:91:db:af:a3:da Sending on LPF/eth0/f6:91:db:af:a3:da Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
[PYBOOT] [colombus 03:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:17]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.445631] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.519865] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.530190] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.604404] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.614728] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.688885] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.699207] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.773414] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.783740] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.857905] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.868239] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.942454] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.952781] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.026967] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.037291] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.111541] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.121933] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.196086] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.206407] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.280617] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.290935] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.365134] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.375454] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.449667] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.459992] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.534195] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.544517] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.618664] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.628985] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.703204] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.713532] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.787686] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.798006] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.062840] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.136819] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.146900] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.220877] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.230950] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.304928] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.315010] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.388994] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.399070] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.473057] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.483139] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.557122] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.567194] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.641180] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.651245] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.725218] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.735289] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.809271] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.819339] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.893362] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.903419] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.977394] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.987466] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.061447] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.071519] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.145497] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.155570] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.229547] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.239622] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.313603] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.323681] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.397654] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.407733] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:05]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:06]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:09]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.802951] can: netlink gateway (rev 20130117) max_hops=1 [ 2.809949] Key type dns_resolver registered [ 2.816293] ThumbEE CPU extension supported. [ 2.820683] Registering SWP/SWPB emulation handler [ 2.834519] usb1_vbus: supplied by vdd-sys-5v0 [ 2.845311] usb2_vbus: supplied by vdd-sys-5v0 [ 2.864814] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.886987] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.893771] [drm] No driver support for vblank timestamp query. [ 2.908999] mmc1: new high speed MMC card at address 0001 [ 2.919151] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.927448] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.937155] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.946735] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.957288] mmcblk1: p1 [ 3.072750] Console: switching to colour frame buffer device 240x75 [ 3.160502] drm drm: fb0: frame buffer device [ 3.178264] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.193564] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.199162] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.207743] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.223261] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.233569] hub 1-0:1.0: USB hub found [ 3.237562] hub 1-0:1.0: 1 port detected [ 3.248055] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.262583] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.325404] dvdd_ts: disabling [ 3.328620] usb1_vbus: disabling [ 3.331881] vdd_cam_1v8_reg: disabling [ 3.339654] Waiting for root device /dev/mmcblk0p1... [ 3.548281] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.526955] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.248253] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:19]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:20]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.796859] can: netlink gateway (rev 20130117) max_hops=1 [ 2.803826] Key type dns_resolver registered [ 2.810168] ThumbEE CPU extension supported. [ 2.814561] Registering SWP/SWPB emulation handler [ 2.836932] usb1_vbus: supplied by vdd-sys-5v0 [ 2.845542] usb2_vbus: supplied by vdd-sys-5v0 [ 2.863769] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.888228] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.895014] [drm] No driver support for vblank timestamp query. [ 2.901450] mmc1: new high speed MMC card at address 0001 [ 2.910722] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.917436] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.926051] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.934951] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.945673] mmcblk1: p1 [ 3.072229] Console: switching to colour frame buffer device 240x75 [ 3.159687] drm drm: fb0: frame buffer device [ 3.177453] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.192831] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.198428] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.207293] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.222465] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.232779] hub 1-0:1.0: USB hub found [ 3.236776] hub 1-0:1.0: 1 port detected [ 3.247584] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.262391] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.324501] dvdd_ts: disabling [ 3.327726] usb1_vbus: disabling [ 3.330986] vdd_cam_1v8_reg: disabling [ 3.338389] Waiting for root device /dev/mmcblk0p1... [ 3.547466] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.530361] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.567438] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.462330] Bluetooth: RFCOMM socket layer initialized [ 5.467622] Bluetooth: RFCOMM ver 1.11 [ 5.471436] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.476917] Bluetooth: BNEP socket layer initialized [ 5.481982] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.487986] Bluetooth: HIDP socket layer initialized [ 5.494291] Key type dns_resolver registered [ 5.503696] Registering SWP/SWPB emulation handler [ 5.518402] usb1_vbus: supplied by vdd-sys-5v0 [ 5.526321] usb2_vbus: supplied by vdd-sys-5v0 [ 5.538246] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.564394] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.571043] [drm] No driver support for vblank timestamp query. [ 5.748613] Console: switching to colour frame buffer device 240x75 [ 5.835951] drm drm: fb0: frame buffer device [ 5.862136] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.871289] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.877166] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.886434] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.912145] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.926067] hub 1-0:1.0: USB hub found [ 5.930034] hub 1-0:1.0: 1 port detected [ 5.943718] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.958731] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.046632] dvdd_ts: disabling [ 6.049757] usb1_vbus: disabling [ 6.053198] vdd_cam_1v8_reg: disabling [ 6.057772] ALSA device list: [ 6.060762] #0: NVIDIA Tegra Dalmore [ 6.066660] Waiting for root device /dev/mmcblk0p1... [ 6.252129] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.275851] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.042120] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.701398] sit: IPv6 over IPv4 tunneling driver [ 1.706528] NET: Registered protocol family 17 [ 1.709787] NET: Registered protocol family 15 [ 1.714263] Key type dns_resolver registered [ 1.718586] Registering SWP/SWPB emulation handler [ 1.726509] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.731165] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.738569] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.745731] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.752305] [drm] No driver support for vblank timestamp query. [ 1.758224] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.764573] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.769597] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.777009] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.784162] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.792984] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.802740] mmc1: new DDR MMC card at address 0001 [ 1.806978] max98090 1-0010: MAX98090 REVID=0x43 [ 1.809274] max98090 1-0010: use default 2.8v micbias [ 1.817996] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.821699] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.827916] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.828794] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.832499] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.846334] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.852994] mmcblk1: p1 p2 [ 1.865894] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.887962] VDD10_HDMI_1.0V: disabling [ 1.888698] vdd_g3d: disabling [ 1.889765] BUCK8_2.8V: disabling [ 1.893829] ALSA device list: [ 1.895356] #0: Odroid-U3 [ 1.899312] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:56]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.933260] mmc0: new high speed MMC card at address 0001 [ 1.939344] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944285] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.950651] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959936] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.970092] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978469] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985502] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, b2:99:77:bb:2a:33 [ 1.997293] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.005399] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.016552] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.024715] ldo9: bypassed regulator has no supply! [ 2.029839] ldo9: failed to get the current voltage(-517) [ 2.035502] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.050850] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.074310] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.080701] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107352] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126054] ldo9: bypassed regulator has no supply! [ 2.131177] ldo9: failed to get the current voltage(-517) [ 2.136842] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151317] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:45:59 UTC (946691159) [ 2.167005] pbias_mmc_omap5: disabling [ 2.170962] vmmcsdio_fixed: disabling [ 2.175631] Waiting for root device /dev/mmcblk1p2... [ 2.228557] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.364415] hub 1-2:1.0: USB hub found [ 2.368430] hub 1-2:1.0: 3 ports detected [ 2.374356] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.402378] smps9: Bringing 0uV into 2100000-2100000uV [ 2.421101] ldo9: bypassed regulator has no supply! [ 2.426226] ldo9: failed to get the current voltage(-517) [ 2.431892] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:21]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:22]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.975034] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.981583] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.989634] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000805] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.008949] smsc95xx v1.0.4 [ 2.012432] ldo9: bypassed regulator has no supply! [ 2.017569] ldo9: failed to get the current voltage(-517) [ 2.023249] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.038816] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064330] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070788] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.097977] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 76:80:c2:e8:a8:3b [ 2.114895] smps9: Bringing 0uV into 2100000-2100000uV [ 2.133801] ldo9: bypassed regulator has no supply! [ 2.138914] ldo9: failed to get the current voltage(-517) [ 2.144581] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.158687] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.192342] smps9: Bringing 0uV into 2100000-2100000uV [ 2.211205] ldo9: bypassed regulator has no supply! [ 2.216318] ldo9: failed to get the current voltage(-517) [ 2.221979] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.236430] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:43:24 UTC (946691004) [ 2.252113] pbias_mmc_omap5: disabling [ 2.256049] vmmcsdio_fixed: disabling [ 2.260579] Waiting for root device /dev/mmcblk1p2... [ 2.338535] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.474396] hub 1-2:1.0: USB hub found [ 2.478409] hub 1-2:1.0: 3 ports detected [ 2.484274] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.512401] smps9: Bringing 0uV into 2100000-2100000uV [ 2.531339] ldo9: bypassed regulator has no supply! [ 2.536458] ldo9: failed to get the current voltage(-517) [ 2.542124] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ldo1: Bringing 0uV into 1800000-1800000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1800000-1800000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:48:16 UTC (946691296) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 22:49:fd:36:4a:9a omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.937243] ldo9: bypassed regulator has no supply! [ 3.942373] ldo9: failed to get the current voltage(-517) [ 3.948059] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.970872] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.978391] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.984941] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.991259] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.998131] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.007733] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.017205] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.024260] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.030403] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.036694] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.043559] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.053147] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.062650] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.069692] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.088380] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.094671] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.101537] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.111123] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.120621] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.127665] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.149068] smps9: Bringing 0uV into 2100000-2100000uV [ 4.178469] ldo9: bypassed regulator has no supply! [ 4.183577] ldo9: failed to get the current voltage(-517) [ 4.189260] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.209394] hctosys: unable to open rtc device (rtc0) [ 4.214684] sr_init: No PMIC hook to init smartreflex [ 4.220193] sr_init: platform driver register failed for SR [ 4.248351] pbias_mmc_omap5: disabling [ 4.252290] vmmcsdio_fixed: disabling [ 4.258451] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533126] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539481] isl29018 7-0044: Failed to read 1: -6 [ 1.544064] isl29018 7-0044: regmap initialization fails: -6 [ 1.554955] NET: Registered protocol family 10 [ 1.559390] sit: IPv6 over IPv4 tunneling driver [ 1.562967] NET: Registered protocol family 17 [ 1.566971] can: controller area network core (rev 20120528 abi 9) [ 1.573160] NET: Registered protocol family 29 [ 1.577549] can: raw protocol (rev 20120528) [ 1.581798] can: broadcast manager protocol (rev 20120528 t) [ 1.587441] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593167] Key type dns_resolver registered [ 1.597492] ThumbEE CPU extension supported. [ 1.601409] Registering SWP/SWPB emulation handler [ 1.611274] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616753] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623120] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628495] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638592] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.648910] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654346] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664535] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670718] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676096] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.685812] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708000] Waiting for root device /dev/mmcblk0p1... [ 1.711875] mmc0: tuning execution failed: -5 [ 1.715937] mmc0: error -5 whilst initialising MMC card [ 2.582916] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597034] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602492] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.608865] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614247] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:55]: got exception: timeout ~$off
[PYBOOT] [pi 01:56]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533129] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539484] isl29018 7-0044: Failed to read 1: -6 [ 1.544067] isl29018 7-0044: regmap initialization fails: -6 [ 1.554957] NET: Registered protocol family 10 [ 1.559399] sit: IPv6 over IPv4 tunneling driver [ 1.562978] NET: Registered protocol family 17 [ 1.566984] can: controller area network core (rev 20120528 abi 9) [ 1.573173] NET: Registered protocol family 29 [ 1.577562] can: raw protocol (rev 20120528) [ 1.581811] can: broadcast manager protocol (rev 20120528 t) [ 1.587453] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593177] Key type dns_resolver registered [ 1.597505] ThumbEE CPU extension supported. [ 1.601423] Registering SWP/SWPB emulation handler [ 1.611323] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616800] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623169] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628542] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638640] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.644880] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.658642] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.664314] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670496] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.675876] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.685584] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.707746] Waiting for root device /dev/mmcblk0p1... [ 1.711590] mmc0: tuning execution failed: -5 [ 1.715652] mmc0: error -5 whilst initialising MMC card [ 2.582910] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597022] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602479] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.608851] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614234] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:53]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.906149] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.917350] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.923831] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.929269] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.937709] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.951422] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.958145] hub 3-0:1.0: USB hub found [ 1.961953] hub 3-0:1.0: 1 port detected [ 1.969998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.976667] [drm] No driver support for vblank timestamp query. [ 2.001672] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.015187] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.018006] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.025133] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.039472] mmc2: switch to bus width 8 failed [ 2.039727] mmc2: switch to bus width 4 failed [ 2.039740] mmc2: new high speed MMC card at address 0001 [ 2.040220] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.040430] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.040610] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.041852] mmcblk2: p3 [ 2.044835] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.048799] mmc0: new SDIO card at address 0001 [ 2.082966] Console: switching to colour frame buffer device 170x48 [ 2.162316] drm drm: fb0: frame buffer device [ 2.181414] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.188022] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.194991] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.208325] vdd_1v5: disabling [ 2.211377] vdd_1v2: disabling [ 2.769643] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.781021] Waiting for root device /dev/mmcblk0p3... [ 57.826533] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:06]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:07]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) Console: switching to colour frame buffer device 170x48 mmc0: queuing unknown CIS tuple 0x80 (7 bytes) drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x80 (19 bytes) mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.399926] can: raw protocol (rev 20120528) [ 4.404197] can: broadcast manager protocol (rev 20120528 t) [ 4.409898] can: netlink gateway (rev 20130117) max_hops=1 [ 4.445461] Bluetooth: RFCOMM socket layer initialized [ 4.450614] Bluetooth: RFCOMM ver 1.11 [ 4.454370] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.459721] Bluetooth: BNEP socket layer initialized [ 4.464678] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.470633] Bluetooth: HIDP socket layer initialized [ 4.476930] Key type dns_resolver registered [ 4.482683] Registering SWP/SWPB emulation handler [ 4.498332] VDDIO_HDMI: supplied by vdd_5v0 [ 4.505305] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.517199] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.523676] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.529177] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.537557] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.555283] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.564983] hub 3-0:1.0: USB hub found [ 4.568872] hub 3-0:1.0: 1 port detected [ 4.583351] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.590033] [drm] No driver support for vblank timestamp query. [ 4.703234] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.719512] Console: switching to colour frame buffer device 170x48 [ 4.759015] drm drm: fb0: frame buffer device [ 4.785849] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.793004] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.800635] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.819379] vdd_1v5: disabling [ 4.822432] vdd_1v2: disabling [ 4.825615] ALSA device list: [ 4.828575] #0: NVIDIA Tegra Seaboard [ 4.833060] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:52]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.995330] NET: Registered protocol family 29 [ 1.999786] can: raw protocol (rev 20120528) [ 2.004089] can: broadcast manager protocol (rev 20120528 t) [ 2.009765] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016113] Key type dns_resolver registered [ 2.020782] ThumbEE CPU extension supported. [ 2.025085] Registering SWP/SWPB emulation handler [ 2.037414] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.044555] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.054107] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.061157] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.068206] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.075225] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.092346] db8500-esram12: disabling [ 2.096191] db8500-esram34: disabling [ 2.099945] en-3v3-fixed-supply: disabling [ 2.105560] V-CSI/DSI: disabling [ 2.110931] mmci-reg: disabling [ 2.114868] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.120880] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.127532] Waiting for root device /dev/mmcblk0p4... [ 2.152069] mmc3: new high speed MMC card at address 0001 [ 2.158416] mmcblk3: mmc3:0001 3.53 GiB [ 2.162841] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.168640] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.174407] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.181335] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:19]: got exception: timeout ~$off
[PYBOOT] [snowball 02:20]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling en-3v3-fixed-supply: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:58]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.618835] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.653350] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.664337] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.680816] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.691711] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.728576] NET: Registered protocol family 10 [ 2.736053] sit: IPv6 over IPv4 tunneling driver [ 2.743682] NET: Registered protocol family 17 [ 2.748229] NET: Registered protocol family 35 [ 2.753356] NET: Registered protocol family 37 [ 2.758117] Registering SWP/SWPB emulation handler [ 2.779418] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.790283] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-15 03:56:26 UTC (955770986) [ 2.799530] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.806640] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.813690] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.820709] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.835052] db8500-esram12: disabling [ 2.838836] db8500-esram34: disabling [ 2.842590] en-3v3-fixed-supply: disabling [ 2.846893] V-CSI/DSI: disabling [ 2.850219] mmci-reg: disabling [ 2.853515] ALSA device list: [ 2.856475] #0: MOP500-card [ 2.859771] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.865783] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.872070] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done.
kernel-build-reports@lists.linaro.org