Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.8-rc7-950-gbcaf9dc/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 29:20.60 beaver arm-tegra_defconfig : FAILED 1:44.92 beaver arm-multi_v7_defconfig : FAILED 1:49.51 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.80 capri bcm_defconfig : NO BUILD colombus arm-multi_v7_defconfig : FAILED 2:08.02 colombus arm-multi_lpae_defconfig : FAILED 2:02.85 colombus arm-multi_v7_nosmp_defconfig : FAILED 1:19.92 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:08.29 omap5uevm arm-multi_v7_defconfig : FAILED 2:04.80 omap5uevm arm-multi_lpae_defconfig : FAILED 2:30.71 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 0:49.82 pit arm-exynos_defconfig : FAILED 1:50.79 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.58 snowball arm-u8500_defconfig : FAILED 3:10.45 wandboard arm-imx_v6_v7_defconfig : FAILED 1:46.19 wandboard arm-multi_v7_defconfig : FAILED 2:12.35 wandboard arm-multi_v7_nosmp_defconfig : FAILED 1:47.83

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:13.29 arndale arm-exynos_defconfig : passed 1:57.85 arndale arm-multi_v7_defconfig : passed 1:22.91 arndale arm-multi_lpae_defconfig : passed 1:24.11 bbb arm-omap2plus_defconfig : passed 1:45.45 bbb arm-multi_v7_defconfig : passed 1:28.40 bbb arm-multi_v7_nosmp_defconfig : passed 1:23.79 beagleboard-x15 arm-omap2plus_defconfig : passed 1:03.34 beagleboard-x15 arm-multi_v7_defconfig : passed 1:17.69 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:59.13 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:09.45 capri arm-multi_v7_defconfig : passed 0:53.37 capri arm-multi_v7_nosmp_defconfig : warnings 1:05.83 chitra powerpc-pasemi_defconfig : passed 1:40.45 chitra powerpc-ppc64_defconfig : passed 2:34.71 colombus arm-sunxi_defconfig : passed 2:05.16 cosmic arm-imx_v6_v7_defconfig : passed 3:24.59 cosmic arm-multi_v7_defconfig : passed 2:58.98 cosmic arm-multi_v7_nosmp_defconfig : passed 2:38.68 cubie arm-sunxi_defconfig : passed 0:51.43 cubie arm-multi_v7_defconfig : passed 0:53.12 cubie arm-multi_v7_nosmp_defconfig : passed 0:59.93 cubie2 arm-sunxi_defconfig : passed 0:50.36 cubie2 arm-multi_v7_defconfig : passed 0:54.21 cubie2 arm-multi_lpae_defconfig : passed 1:14.46 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:51.96 cubox arm-multi_v7_defconfig : passed 1:01.41 cubox arm-mvebu_v7_defconfig : passed 1:15.32 cubox arm-multi_v7_nosmp_defconfig : passed 1:11.38 dalmore arm-tegra_defconfig : passed 1:33.24 dalmore arm-multi_v7_defconfig : passed 1:33.20 dalmore arm-multi_lpae_defconfig : passed 1:35.81 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:32.22 jetsontk1 arm-tegra_defconfig : passed 0:50.59 jetsontk1 arm-multi_v7_defconfig : passed 0:47.28 jetsontk1 arm-multi_lpae_defconfig : passed 1:08.13 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:52.18 omap5uevm arm-omap2plus_defconfig : passed 1:12.32 pandaes arm-omap2plus_defconfig : warnings 1:44.42 pandaes arm-multi_v7_defconfig : passed 1:29.02 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:50.11 pi arm-exynos_defconfig : passed 2:21.22 pi arm-multi_v7_defconfig : passed 2:13.49 pi arm-multi_lpae_defconfig : passed 2:34.50 pi arm-multi_v7_nosmp_defconfig : warnings 2:12.43 pit arm-multi_v7_defconfig : passed 2:10.93 pit arm-multi_lpae_defconfig : passed 2:15.32 seaboard arm-tegra_defconfig : passed 1:01.19 seaboard arm-multi_v7_defconfig : passed 1:11.80 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:03.20 seattle arm64-defconfig : warnings 2:21.68 snow arm-exynos_defconfig : passed 2:11.79 snow arm-multi_v7_defconfig : passed 2:07.98 snow arm-multi_lpae_defconfig : passed 1:59.10 snowball arm-multi_v7_defconfig : passed 1:16.68 snowball arm-multi_v7_nosmp_defconfig : warnings 1:08.56 trimslice arm-tegra_defconfig : passed 2:56.40 trimslice arm-multi_v7_defconfig : passed 1:51.55

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.40 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:24.46 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:23.46 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:32.22 hummingboard arm-multi_v7_defconfig : OFFLINE 2:17.48 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.25 parallella arm-multi_v7_defconfig : OFFLINE 2:41.94 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.53 pit arm-multi_v7_nosmp_defconfig : OFFLINE 1:52.45 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.46 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:49.76 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:47.65 sama5 arm-sama5_defconfig : OFFLINE 2:16.60 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:20.13 socfpga arm-socfpga_defconfig : OFFLINE 2:29.22 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.76 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:17.74 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 1:52.45

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 0.561570] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.561897] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.567745] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.568195] NFS: Registering the id_resolver key type [ 0.568207] Key type id_resolver registered [ 0.568212] Key type id_legacy registered [ 0.568240] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.568924] bounce: pool size: 64 pages [ 0.569041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.569047] io scheduler noop registered [ 0.569052] io scheduler deadline registered [ 0.569155] io scheduler cfq registered (default) [ 0.571582] 12100000.phy supply vbus not found, using dummy regulator [ 0.571614] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.572421] libphy: mdio_driver_register: phy-bcm-ns2-pci [ 0.581302] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.581312] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.582876] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.582885] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.583341] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.583350] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.583806] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.583815] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.616204] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.617789] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10 [ 0.617992] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10 [ 0.618179] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 1.801997] console [ttySAC2] enabled [ 1.805829] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.814847] SuperH (H)SCI(F) driver initialized [ 1.819652] msm_serial: driver initialized [ 1.823197] STMicroelectronics ASC driver initialized [ 1.830089] [drm] Initialized drm 1.1.0 20060810 [ 1.841859] brd: module loaded [ 1.846218] loop: module loaded [ 1.848950] ahci 122f0000.sata: couldn't get PHY in node sat [PYBOOT] [arndale 29:13]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 29:14]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.278109] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.285067] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.291586] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.298555] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.304142] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.311150] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.321152] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.332687] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.339302] [drm] No driver support for vblank timestamp query. [ 3.345241] drm drm: No connectors reported connected with modes [ 3.351247] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.376283] Console: switching to colour frame buffer device 128x48 [ 3.388210] drm drm: fb0: frame buffer device [ 3.408397] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.419233] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.425699] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.431113] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.438935] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.458411] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.465194] hub 1-0:1.0: USB hub found [ 3.468976] hub 1-0:1.0: 1 port detected [ 3.473959] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.479369] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.487103] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.503404] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.510086] hub 2-0:1.0: USB hub found [ 3.513853] hub 2-0:1.0: 1 port detected [ 3.522669] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.536311] vdd_sata,avdd_plle: disabling [ 3.540747] usb1_vbus: disabling [ 3.544816] Waiting for root device /dev/mmcblk0p1... [ 3.843407] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.831962] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:49]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.242770] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.249722] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.256238] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.263176] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.268757] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.275338] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.285330] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.295601] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.302214] [drm] No driver support for vblank timestamp query. [ 3.308152] drm drm: No connectors reported connected with modes [ 3.314152] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.333593] Console: switching to colour frame buffer device 128x48 [ 3.345363] drm drm: fb0: frame buffer device [ 3.349800] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.359971] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.366426] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.371830] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.379549] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.398163] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.404499] hub 1-0:1.0: USB hub found [ 3.408264] hub 1-0:1.0: 1 port detected [ 3.413001] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.418409] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.426061] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.443160] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.449442] hub 2-0:1.0: USB hub found [ 3.453204] hub 2-0:1.0: 1 port detected [ 3.460693] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.473801] vdd_sata,avdd_plle: disabling [ 3.478189] usb1_vbus: disabling [ 3.482101] Waiting for root device /dev/mmcblk0p1... [ 3.783164] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.771638] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:46]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 7.054248] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.061313] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.066914] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.074431] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.084431] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.096776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.103416] [drm] No driver support for vblank timestamp query. [ 7.109419] drm drm: No connectors reported connected with modes [ 7.115431] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.141334] Console: switching to colour frame buffer device 128x48 [ 7.153146] drm drm: fb0: frame buffer device [ 7.190821] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.199992] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.206491] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.211924] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.219887] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.250829] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.258453] hub 1-0:1.0: USB hub found [ 7.262248] hub 1-0:1.0: 1 port detected [ 7.267042] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.272468] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.280337] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.310817] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.318282] hub 2-0:1.0: USB hub found [ 7.322069] hub 2-0:1.0: 1 port detected [ 7.330279] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.348499] vdd_sata,avdd_plle: disabling [ 7.352997] usb1_vbus: disabling [ 7.356386] ALSA device list: [ 7.359343] #0: NVIDIA Tegra Beaver [ 7.363526] Waiting for root device /dev/mmcblk0p1... [ 7.680823] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.766230] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:42]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done. Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.463731] [<c030bdac>] (die) from [<c031ce18>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.472249] [<c031ce18>] (__do_kernel_fault.part.0) from [<c0317e60>] (do_page_fault+0x36c/0x380) [ 2.481684] [<c0317e60>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.489866] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 2.497575] Exception stack(0xee65fcd8 to 0xee65fd20) [ 2.502973] fcc0: 00000000 00000000 [ 2.511644] fce0: 00000000 ee0182cc ee018298 c133fb90 00000001 00000000 ee01a008 ffffffff [ 2.520318] fd00: 00000000 0010c8e0 ee018288 ee65fd28 c03a2b08 c03a2aac 20000013 ffffffff [ 2.529083] [<c030c478>] (__dabt_svc) from [<c03a2aac>] (clocksource_unbind+0x2c/0x5c) [ 2.537622] [<c03a2aac>] (clocksource_unbind) from [<c03a2b08>] (clocksource_unregister+0x2c/0x44) [ 2.547230] [<c03a2b08>] (clocksource_unregister) from [<c0a272a8>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 2.556991] [<c0a272a8>] (sun5i_rate_cb_clksrc) from [<c035dc68>] (notifier_call_chain+0x44/0x84) [ 2.566457] [<c035dc68>] (notifier_call_chain) from [<c035dfd8>] (__srcu_notifier_call_chain+0x44/0x60) [ 2.576443] [<c035dfd8>] (__srcu_notifier_call_chain) from [<c035e00c>] (srcu_notifier_call_chain+0x18/0x20) [ 2.586878] [<c035e00c>] (srcu_notifier_call_chain) from [<c0a495e4>] (__clk_notify+0x70/0x7c) [ 2.596097] [<c0a495e4>] (__clk_notify) from [<c0a49730>] (clk_propagate_rate_change+0xa4/0xc4) [ 2.605414] [<c0a49730>] (clk_propagate_rate_change) from [<c0a496f8>] (clk_propagate_rate_change+0x6c/0xc4) [ 2.615739] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.622182] ---[ end trace bfc261cd948fa508 ]--- [ 2.627062] Fixing recursive fault but reboot is needed! [ 23.119702] INFO: rcu_sched detected stalls on CPUs/tasks: [ 23.125912] 1-...: (1 GPs behind) idle=d3d/140000000000000/0 softirq=32/32 fqs=5 [ 23.133743] (detected by 0, t=4232 jiffies, g=-276, c=-277, q=12) [ 23.140453] Task dump for CPU 1: [ 23.143953] kworker/1:1 D c0bad300 0 85 0 0x00000002 [ 23.151402] [<c0bad300>] (__schedule) from [<c1202100>] (0xc1202100) [ 23.158262] rcu_sched kthread starved for 4222 jiffies! g4294967020 c4294967019 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 [ 23.168968] rcu_sched S c0bad300 0 7 2 0x00000000 [ 23.176200] [<c0bad300>] (__schedule) from [<c0bad6ec>] (schedule+0x44/0x9c) [ 23.183816] [<c0bad6ec>] (schedule) from [<c0bb0444>] (schedule_timeout+0x150/0x234) [ 23.192168] [<c0bb0444>] (schedule_timeout) from [<c03949f8>] (rcu_gp_kthread+0x518/0x8dc) [ 23.200989] [<c03949f8>] (rcu_gp_kthread) from [<c035d180>] (kthread+0xdc/0xf4) [ 23.208856] [<c035d180>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c)

[PYBOOT] [colombus 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 02:01]: got exception: timeout ~$off

[PYBOOT] [colombus 02:02]: Done. Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.567812] [<c0358980>] (wq_worker_sleeping) from [<c0bad498>] (__schedule+0x374/0x584) [ 1.568134] [<c0bad498>] (__schedule) from [<c0bad6ec>] (schedule+0x44/0x9c) [ 1.568517] [<c0bad6ec>] (schedule) from [<c03446a0>] (do_exit+0x6d8/0xa78) [ 1.568875] [<c03446a0>] (do_exit) from [<c030bdac>] (die+0x410/0x474) [ 1.569224] [<c030bdac>] (die) from [<c031ce18>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 1.569614] [<c031ce18>] (__do_kernel_fault.part.0) from [<c0317e60>] (do_page_fault+0x36c/0x380) [ 1.569962] [<c0317e60>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 1.570271] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 1.570393] Exception stack(0xee0e1cd8 to 0xee0e1d20) [ 1.570560] 1cc0: 00000000 00000000 [ 1.570870] 1ce0: 00000000 ee0182cc ee018298 c133fb90 00000001 00000000 ee01a008 ffffffff [ 1.571183] 1d00: 00000000 0010c8e0 ee018288 ee0e1d28 c03a2b08 c03a2aac 20000013 ffffffff [ 1.571571] [<c030c478>] (__dabt_svc) from [<c03a2aac>] (clocksource_unbind+0x2c/0x5c) [ 1.571983] [<c03a2aac>] (clocksource_unbind) from [<c03a2b08>] (clocksource_unregister+0x2c/0x44) [ 1.572422] [<c03a2b08>] (clocksource_unregister) from [<c0a272a8>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 1.572828] [<c0a272a8>] (sun5i_rate_cb_clksrc) from [<c035dc68>] (notifier_call_chain+0x44/0x84) [ 1.573208] [<c035dc68>] (notifier_call_chain) from [<c035dfd8>] (__srcu_notifier_call_chain+0x44/0x60) [ 1.573595] [<c035dfd8>] (__srcu_notifier_call_chain) from [<c035e00c>] (srcu_notifier_call_chain+0x18/0x20) [ 1.573989] [<c035e00c>] (srcu_notifier_call_chain) from [<c0a495e4>] (__clk_notify+0x70/0x7c) [ 1.574391] [<c0a495e4>] (__clk_notify) from [<c0a49730>] (clk_propagate_rate_change+0xa4/0xc4) [ 1.574797] [<c0a49730>] (clk_propagate_rate_change) from [<c0a496f8>] (clk_propagate_rate_change+0x6c/0xc4) [ 1.575084] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 1.575218] ---[ end trace 8a313522ad1ace9a ]--- [ 1.575301] Fixing recursive fault but reboot is needed! [ 1.666278] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.835835] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 7.005693] usb 1-1: device descriptor read/64, error -110 [ 23.664566] INFO: rcu_sched detected stalls on CPUs/tasks: [ 23.670766] 3-...: (1 GPs behind) idle=2b3/140000000000000/0 softirq=28/29 fqs=2101 [ 23.678849] (detected by 1, t=4204 jiffies, g=-276, c=-277, q=12) [ 23.685555] Task dump for CPU 3: [ 23.689047] kworker/3:0 D c0bad300 0 29 0 0x00000002 [ 23.696514] [<c0bad300>] (__schedule) from [<2aea5400>] (0x2aea5400)

[PYBOOT] [colombus 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 02:05]: got exception: timeout ~$off

[PYBOOT] [colombus 02:06]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 33.942099] [<c0b4ad60>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 33.952024] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 33.961485] [<c030b7b0>] (die) from [<c031a730>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 33.972082] [<c031a730>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 33.983530] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 33.993648] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.002515] Exception stack(0xee0728e8 to 0xee072930) [ 34.009757] 28e0: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 [ 34.020554] 2900: c1132e20 00000000 ee060eec c0b4ad60 c034fada ee072984 ee0608b8 ee072938 [ 34.030702] 2920: c034b360 c034fad8 20000193 ffffffff [ 34.038401] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.048328] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.058848] [<c034b360>] (wq_worker_sleeping) from [<c0b4abc8>] (__schedule+0x310/0x464) [ 34.069375] [<c0b4abc8>] (__schedule) from [<c0b4ad60>] (schedule+0x44/0x9c) [ 34.079075] [<c0b4ad60>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.088992] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.098456] [<c030b7b0>] (die) from [<c031a730>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.109050] [<c031a730>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 34.120473] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.130592] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.139488] Exception stack(0xee072b20 to 0xee072b68) [ 34.147011] 2b20: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 c1132e20 00000000 [ 34.157851] 2b40: ee060eec c0b4ad60 c034fada ee072bbc ee0608b8 ee072b70 c034b360 c034fad8 [ 34.167663] 2b60: 20000193 ffffffff [ 34.173787] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.183712] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.194234] [<c034b360>] (wq_worker_sleeping) from [<c0b4abc8>] (__schedule+0x310/0x464) [ 34.204765] [<c0b4abc8>] (__schedule) from [<c0b4ad60>] (schedule+0x44/0x9c) [ 34.214459] [<c0b4ad60>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.224385] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.233862] [<c030b7b0>] (die) from [<c031a730>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.244463] [<c031a730>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 34.255905] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.266026] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.274933] Exception stack(0xee072d58 to 0xee072da0) [ 34.281637] 2d40: ee06 [PYBOOT] [colombus 01:17]: got exception: panic ~$off

[PYBOOT] [colombus 01:18]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 2.269486] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.269564] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 2.269779] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.279588] exynos-bus: new bus device registered: bus_dmc (100000 KHz ~ 400000 KHz) [ 2.280297] exynos-bus: new bus device registered: bus_acp (100000 KHz ~ 267000 KHz) [ 2.280736] exynos-bus: new bus device registered: bus_c2c (100000 KHz ~ 400000 KHz) [ 2.293224] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.293239] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.293472] exynos-bus: new bus device registered: bus_leftbus (100000 KHz ~ 200000 KHz) [ 2.293937] exynos-bus: new bus device registered: bus_rightbus (100000 KHz ~ 200000 KHz) [ 2.294516] exynos-bus: new bus device registered: bus_display (160000 KHz ~ 200000 KHz) [ 2.295093] exynos-bus: new bus device registered: bus_fsys (100000 KHz ~ 134000 KHz) [ 2.295664] exynos-bus: new bus device registered: bus_peri ( 50000 KHz ~ 100000 KHz) [ 2.296119] exynos-bus: new bus device registered: bus_mfc (100000 KHz ~ 200000 KHz) [ 2.315523] hub 1-3:1.0: USB hub found [ 2.322442] hub 1-3:1.0: 3 ports detected [ 2.347040] max98090 1-0010: MAX98090 REVID=0x43 [ 2.377827] devfreq bus_dmc: Couldn't update frequency transition information. [ 2.390015] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.395826] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.401532] max98090 1-0010: use default 2.8v micbias [ 2.406478] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.413501] devfreq bus_leftbus: Couldn't update frequency transition information. [ 2.419880] mmcblk1: p1 p2 [ 2.429878] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.434849] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.467640] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 2.488985] VDD10_HDMI_1.0V: disabling [ 2.490714] vdd_g3d: disabling [ 2.491957] BUCK8_P3V3: disabling [ 2.495591] ALSA device list: [ 2.496398] #0: Odroid-U3 [ 2.501111] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 02:05]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:06]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:07]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 3.182457] [<c0bad6ec>] (schedule) from [<c03446a0>] (do_exit+0x6d8/0xa78) [ 3.189717] [<c03446a0>] (do_exit) from [<c030bdac>] (die+0x410/0x474) [ 3.196525] [<c030bdac>] (die) from [<c031ce18>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 3.204782] [<c031ce18>] (__do_kernel_fault.part.0) from [<c0317e60>] (do_page_fault+0x36c/0x380) [ 3.214042] [<c0317e60>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 3.222022] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 3.229728] Exception stack(0xee08fd18 to 0xee08fd60) [ 3.234988] fd00: 07a84238 ee08fd68 [ 3.243510] fd20: 2deb2000 00000000 ee03a000 024080c0 2deb2000 ee025f80 00000002 000081a4 [ 3.252030] fd40: 00000136 fa09c100 00005b99 ee08fd68 c0478628 c0412488 20000013 ffffffff [ 3.260556] [<c030c478>] (__dabt_svc) from [<c0412488>] (kmem_cache_alloc+0x48/0x104) [ 3.268714] [<c0412488>] (kmem_cache_alloc) from [<c0478628>] (__kernfs_new_node+0x44/0xb8) [ 3.277422] [<c0478628>] (__kernfs_new_node) from [<c0479654>] (kernfs_new_node+0x1c/0x38) [ 3.286039] [<c0479654>] (kernfs_new_node) from [<c047af48>] (__kernfs_create_file+0x18/0x94) [ 3.294935] [<c047af48>] (__kernfs_create_file) from [<c047b7a0>] (sysfs_add_file_mode_ns+0xa8/0x190) [ 3.304550] [<c047b7a0>] (sysfs_add_file_mode_ns) from [<c047ba30>] (sysfs_add_file+0x18/0x20) [ 3.313527] [<c047ba30>] (sysfs_add_file) from [<c047c48c>] (sysfs_merge_group+0x50/0xb4) [ 3.322053] [<c047c48c>] (sysfs_merge_group) from [<c07af338>] (device_set_wakeup_capable.part.1+0x34/0x58) [ 3.332212] [<c07af338>] (device_set_wakeup_capable.part.1) from [<c07af3a0>] (device_init_wakeup+0x2c/0x74) [ 3.342457] [<c07af3a0>] (device_init_wakeup) from [<c0a053c0>] (omap_hsmmc_probe+0x2bc/0x984) [ 3.351436] [<c0a053c0>] (omap_hsmmc_probe) from [<c07a308c>] (platform_drv_probe+0x50/0xb0) [ 3.360232] [<c07a308c>] (platform_drv_probe) from [<c07a18a0>] (driver_probe_device+0x208/0x2b4) [ 3.369486] [<c07a18a0>] (driver_probe_device) from [<c079fcc0>] (bus_for_each_drv+0x60/0x94) [ 3.378368] [<c079fcc0>] (bus_for_each_drv) from [<c07a15b8>] (__device_attach+0xb0/0x114) [ 3.386979] [<c07a15b8>] (__device_attach) from [<c07a0a9c>] (bus_probe_device+0x84/0x8c) [ 3.395503] [<c07a0a9c>] (bus_probe_device) from [<c07a0f28>] (deferred_probe_work_func+0x68/0x94) [ 3.404843] [<c07a0f28>] (deferred_probe_work_func) from [<c035772c>] (process_one_work+0x1ec/0x414) [ 3.414365] [<c035772c>] (process_one_work) from [<c035839c>] (worker_thread+0x38/0x594) [ 3.422803] [<c035839c>] (worker_thread) from [<c035d180>] (kthread+0xdc/0xf4) [ 3.430331] [<c035d180>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 3.437866] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 3.444212] ---[ end trace 9bdc9266b7720616 ]--- [ 3.449020] Fixing recursive fault but reboot is needed!

[PYBOOT] [omap5uevm 02:28]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:29]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:30]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.846407] palmas 0-0048: Muxing GPIO 3, PWM 0, LED 0 [ 1.857765] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.873108] SMPS6: supplied by vsys_cobra [ 1.877667] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.885355] SMPS7: supplied by vsys_cobra [ 1.889722] random: fast init done [ 1.893846] vdds_1v8_main: supplied by smps7 [ 1.899253] SMPS8: supplied by vsys_cobra [ 1.904183] mmc0: new high speed MMC card at address 0001 [ 1.910232] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.915154] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.921492] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.927857] SMPS9: supplied by vsys_cobra [ 1.932421] smps9: Bringing 0uV into 2100000-2100000uV [ 1.940493] LDO1: supplied by vsys_cobra [ 1.944905] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.951274] LDO2: supplied by vsys_cobra [ 1.955681] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.962057] LDO3: supplied by vdds_1v8_main [ 1.968066] LDO4: supplied by vdds_1v8_main [ 1.972752] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.979155] LDO5: supplied by vsys_cobra [ 1.984868] LDO6: supplied by vdds_1v8_main [ 1.992376] LDO7: supplied by vsys_cobra [ 1.996802] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.003163] LDO8: supplied by vsys_cobra [ 2.008895] LDO9: supplied by vmmcsd_fixed [ 2.014942] LDOLN: supplied by vsys_cobra [ 2.020770] LDOUSB: supplied by vsys_cobra [ 2.029082] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.049681] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.057486] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.065374] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz

[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.064450] Stack: (0xc1101e68 to 0xc1102000) [ 2.068970] 1e60: ee155840 c1217964 c1101e84 c03530e0 c1132e20 ee5e1100 [ 2.077463] 1e80: c1101e9c 00000001 ee5e1100 60000193 00000000 00000127 ee155840 c03544a0 [ 2.085958] 1ea0: ee5fe2c0 00000002 00000000 c1101ef4 c0e697a0 c0364880 3b9aca00 00000000 [ 2.094451] 1ec0: c1101ed4 c0e697c8 3b9aca00 ee155840 ee155840 00000000 00000001 ee006000 [ 2.102943] 1ee0: fa213000 00000000 00000000 c0364960 00000000 00000000 00000000 ee155840 [ 2.111440] 1f00: c110a5b0 c03649c4 ee155840 c0367500 c113e470 00000000 00000000 c0363ff8 [ 2.119930] 1f20: c113e470 c0364254 c1102438 c113ebc8 fa21200c fa212000 c1101f60 c03016e0 [ 2.128421] 1f40: c03083cc a0000013 ffffffff c1101f94 c1102134 c1100000 00000000 c030bf0c [ 2.136914] 1f60: 00000001 00000000 ea000013 f0880000 c1100000 c110212c c11c1ed8 c1217961 [ 2.145404] 1f80: c1102134 00000000 00000000 00000000 00000266 c1101fb0 c0324e1c c03083cc [ 2.153898] 1fa0: a0000013 ffffffff 00000051 00000000 c1100000 c035a3f0 ffffffff c1000c4c [ 2.162389] 1fc0: ffffffff ffffffff 00000000 c1000684 00000000 c1093a28 c12191d4 c11020b4 [ 2.170880] 1fe0: c1093a24 c1107224 80204059 412fc0f2 00000000 80208078 00000000 00000000 [ 2.179379] [<c035858c>] (enqueue_task_rt) from [<c03544a0>] (try_to_wake_up+0x44/0x104) [ 2.187784] [<c03544a0>] (try_to_wake_up) from [<c0364880>] (__handle_irq_event_percpu+0x6c/0x130) [ 2.197091] [<c0364880>] (__handle_irq_event_percpu) from [<c0364960>] (handle_irq_event_percpu+0x1c/0x58) [ 2.207121] [<c0364960>] (handle_irq_event_percpu) from [<c03649c4>] (handle_irq_event+0x28/0x3c) [ 2.216335] [<c03649c4>] (handle_irq_event) from [<c0367500>] (handle_fasteoi_irq+0xa0/0x168) [ 2.225188] [<c0367500>] (handle_fasteoi_irq) from [<c0363ff8>] (generic_handle_irq+0x24/0x34) [ 2.234131] [<c0363ff8>] (generic_handle_irq) from [<c0364254>] (__handle_domain_irq+0x54/0xa8) [ 2.243164] [<c0364254>] (__handle_domain_irq) from [<c03016e0>] (gic_handle_irq+0x54/0x88) [ 2.251837] [<c03016e0>] (gic_handle_irq) from [<c030bf0c>] (__irq_svc+0x6c/0x90) [ 2.259604] Exception stack(0xc1101f60 to 0xc1101fa8) [ 2.264848] 1f60: 00000001 00000000 ea000013 f0880000 c1100000 c110212c c11c1ed8 c1217961 [ 2.273337] 1f80: c1102134 00000000 00000000 00000000 00000266 c1101fb0 c0324e1c c03083cc [ 2.281824] 1fa0: a0000013 ffffffff [ 2.285445] [<c030bf0c>] (__irq_svc) from [<c03083cc>] (arch_cpu_idle+0x20/0x3c) [ 2.293129] [<c03083cc>] (arch_cpu_idle) from [<c035a3f0>] (cpu_startup_entry+0x150/0x1a8) [ 2.301713] [<c035a3f0>] (cpu_startup_entry) from [<c1000c4c>] (start_kernel+0x374/0x380) [ 2.310209] [<c1000c4c>] (start_kernel) from [<80208078>] (0x80208078) [ 2.316987] Code: e59323b4 e2811001 e5900000 e58313b0 (e5941118) [ 2.323312] ---[ end trace 216d9b12a14e7b8d ]--- [ 2.328103] Kernel panic - not syncing: Fatal exception in interrupt [ 2.334697] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:49]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------

[ 21.230433] BUG: spinlock lockup suspected on CPU#0, kworker/u16:0/6 [ 21.235301] lock: 0xee737800, .magic: dead4ead, .owner: kworker/u16:0/6, .owner_cpu: 0 [ 21.243282] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 4.8.0-rc7-00950-gbcaf9dc #1 [ 21.252303] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.258386] [<c010e0ec>] (unwind_backtrace) from [<c010ad50>] (show_stack+0x10/0x14) [ 21.266103] [<c010ad50>] (show_stack) from [<c032d560>] (dump_stack+0x78/0x8c) [ 21.273302] [<c032d560>] (dump_stack) from [<c015a950>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.281107] [<c015a950>] (do_raw_spin_lock) from [<c06e7ab8>] (__schedule+0x84/0x4b8) [ 21.288913] [<c06e7ab8>] (__schedule) from [<c06e7f38>] (schedule+0x4c/0xac) [ 21.295941] [<c06e7f38>] (schedule) from [<c011d618>] (do_exit+0x8b0/0xa74) [ 21.302881] [<c011d618>] (do_exit) from [<c010af8c>] (die+0x238/0x2f4) [ 21.309391] [<c010af8c>] (die) from [<c0114f78>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.317284] [<c0114f78>] (__do_kernel_fault.part.0) from [<c0110968>] (do_bad_area+0x0/0x8c) [ 21.325696] [<c0110968>] (do_bad_area) from [<c01106d4>] (do_page_fault+0x0/0x294) [ 21.333243] [<c01106d4>] (do_page_fault) from [<2dcd2000>] (0x2dcd2000) [ 21.339834] Sending NMI to all CPUs: [ 21.343390] NMI backtrace for cpu 0 [ 21.346862] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 4.8.0-rc7-00950-gbcaf9dc #1 [ 21.355882] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.361963] [<c010e0ec>] (unwind_backtrace) from [<c010ad50>] (show_stack+0x10/0x14) [ 21.369678] [<c010ad50>] (show_stack) from [<c032d560>] (dump_stack+0x78/0x8c) [ 21.376881] [<c032d560>] (dump_stack) from [<c0330ec0>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.384686] [<c0330ec0>] (nmi_cpu_backtrace) from [<c010ca34>] (raise_nmi+0x60/0x64) [ 21.392407] [<c010ca34>] (raise_nmi) from [<c0330e40>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.401343] [<c0330e40>] (nmi_trigger_all_cpu_backtrace) from [<c015a958>] (do_raw_spin_lock+0x104/0x1d8) [ 21.410884] [<c015a958>] (do_raw_spin_lock) from [<c06e7ab8>] (__schedule+0x84/0x4b8) [ 21.418692] [<c06e7ab8>] (__schedule) from [<c06e7f38>] (schedule+0x4c/0xac) [ 21.425718] [<c06e7f38>] (schedule) from [<c011d618>] (do_exit+0x8b0/0xa74) [ 21.432659] [<c011d618>] (do_exit) from [<c010af8c>] (die+0x238/0x2f4) [ 21.439166] [<c010af8c>] (die) from [<c0114f78>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.447060] [<c0114f78>] (__do_kernel_fault.part.0) from [<c0110968>] (do_bad_area+0x0/0x8c) [ 21.455474] [<c0110968>] (do_bad_area) from [<c01106d4>] (do_page_fault+0x0/0x294) [ 21.463021] [<c01106d4>] (do_page_fault) from [<2dcd2000>] (0x2dcd2000)

[PYBOOT] [pit 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pit 01:49]: got exception: timeout ~$off

[PYBOOT] [pit 01:50]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.011224] can: broadcast manager protocol (rev 20160617 t) [ 2.016869] can: netlink gateway (rev 20130117) max_hops=1 [ 2.022541] Key type dns_resolver registered [ 2.026931] ThumbEE CPU extension supported. [ 2.034650] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 2.040140] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 2.046489] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 2.051868] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 2.061411] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 2.069112] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 2.078408] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 2.087215] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.097018] mmc0: new DDR MMC card at address 0001 [ 2.101690] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.106052] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.112017] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.117759] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 2.124850] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.130215] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.143121] mmcblk0: p2 p3 [ 2.163842] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.172500] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 2.183626] vbat-supply: disabling [ 2.187229] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.194113] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.203707] mmc2: new high speed SDIO card at address 0001 [ 2.209210] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.215834] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.223452] devtmpfs: mounted [ 2.225981] Freeing unused kernel memory: 1024K (c1000000 - c1100000)

[PYBOOT] [snow 00:41]: kernel: finished booting, starting userspace. INIT: version 2.88 booting

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:14]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.777008] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.790710] db8500-esram12: disabling [ 2.794464] db8500-esram34: disabling [ 2.798156] en-3v3-fixed-supply: disabling [ 2.802520] V-CSI/DSI: disabling [ 2.805786] mmci-reg: disabling [ 2.809051] ALSA device list: [ 2.812042] #0: MOP500-card [ 2.815307] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.821319] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.829254] EXT4-fs (mmcblk3p4): couldn't mount as ext3 due to feature incompatibilities [ 2.941497] EXT4-fs (mmcblk3p4): warning: mounting fs with errors, running e2fsck is recommended [ 3.304229] EXT4-fs (mmcblk3p4): mounted filesystem with ordered data mode. Opts: (null) [ 3.312499] VFS: Mounted root (ext4 filesystem) on device 179:4. [ 3.326232] devtmpfs: mounted [ 3.330261] Freeing unused kernel memory: 1024K (c0900000 - c0a00000)

[PYBOOT] [snowball 00:37]: kernel: finished booting, starting userspace. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 4.215179] udevd[1194]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 5.710052] EXT4-fs (mmcblk3p4): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 03:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:08]: got exception: timeout ~$off

[PYBOOT] [snowball 03:09]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 2.956042] can: controller area network core (rev 20120528 abi 9) [ 2.962386] NET: Registered protocol family 29 [ 2.966874] can: raw protocol (rev 20120528) [ 2.971230] can: broadcast manager protocol (rev 20160617 t) [ 2.976945] can: netlink gateway (rev 20130117) max_hops=1 [ 2.983086] Key type dns_resolver registered [ 2.993977] Registering SWP/SWPB emulation handler [ 3.016396] 2188000.ethernet supply phy not found, using dummy regulator [ 3.023451] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 3.032736] pps pps0: new PPS source ptp0 [ 3.045453] libphy: fec_enet_mii_bus: probed [ 3.051857] fec 2188000.ethernet eth0: registered PHC device 1 [ 3.060425] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 3.073394] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 3.082607] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.154358] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.162636] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 3.171966] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.244076] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.253841] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.296747] ALSA device list: [ 3.299742] #0: imx6-wandboard-sgtl5000 [ 3.303790] #1: imx-spdif [ 3.308190] Waiting for root device /dev/mmcblk0p2... [ 3.311585] mmc2: host does not support reading read-only switch, assuming write-enable [ 3.317424] mmc2: new high speed SDHC card at address 0001 [ 3.319786] mmcblk2: mmc2:0001 00000 7.61 GiB [ 3.323098] mmcblk2: p1 p2 [ 3.332068] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.337853] mmc1: new high speed SDHC card at address aaaa [ 3.338817] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 3.341269] mmcblk1: p1 p2 [ 79.074187] random: crng init done

[PYBOOT] [wandboard 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 01:44]: got exception: timeout ~$off

[PYBOOT] [wandboard 01:45]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.619585] NET: Registered protocol family 10 [ 1.624876] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.631465] NET: Registered protocol family 17 [ 1.635947] can: controller area network core (rev 20120528 abi 9) [ 1.642200] NET: Registered protocol family 29 [ 1.646671] can: raw protocol (rev 20120528) [ 1.650960] can: broadcast manager protocol (rev 20160617 t) [ 1.656648] can: netlink gateway (rev 20130117) max_hops=1 [ 1.662515] Key type dns_resolver registered [ 1.668703] ThumbEE CPU extension supported. [ 1.672988] Registering SWP/SWPB emulation handler [ 1.704687] 2188000.ethernet supply phy not found, using dummy regulator [ 1.713414] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.721714] pps pps0: new PPS source ptp0 [ 1.730113] libphy: fec_enet_mii_bus: probed [ 1.734976] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.742171] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.751349] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.803501] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.811953] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.821139] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.878491] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.886235] hctosys: unable to open rtc device (rtc0) [ 1.898132] Waiting for root device /dev/mmcblk0p2... [ 1.941634] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.958444] mmc2: new high speed SDHC card at address 0001 [ 1.964470] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.969840] mmcblk2: p1 p2 [ 1.982483] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.999013] mmc1: new high speed SDHC card at address aaaa [ 2.006752] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 2.012289] mmcblk1: p1 p2 [ 3.798395] random: fast init done

[PYBOOT] [wandboard 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:09]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:10]: Done. Board wandboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.530346] usbhid: USB HID core driver [ 1.539259] NET: Registered protocol family 10 [ 1.546474] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.552969] NET: Registered protocol family 17 [ 1.557442] can: controller area network core (rev 20120528 abi 9) [ 1.563682] NET: Registered protocol family 29 [ 1.568143] can: raw protocol (rev 20120528) [ 1.572424] can: broadcast manager protocol (rev 20160617 t) [ 1.578098] can: netlink gateway (rev 20130117) max_hops=1 [ 1.583928] Key type dns_resolver registered [ 1.589488] ThumbEE CPU extension supported. [ 1.619932] 2188000.ethernet supply phy not found, using dummy regulator [ 1.628603] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.638028] pps pps0: new PPS source ptp0 [ 1.649469] libphy: fec_enet_mii_bus: probed [ 1.654212] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.661253] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.670426] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.721545] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.729857] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.739032] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.792689] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.802299] hctosys: unable to open rtc device (rtc0) [ 1.812375] Waiting for root device /dev/mmcblk0p2... [ 1.883863] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.897527] mmc2: new high speed SDHC card at address 0001 [ 1.903391] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.908696] mmcblk2: p1 p2 [ 1.919691] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.935670] mmc1: new high speed SDHC card at address aaaa [ 1.945259] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 1.953645] mmcblk1: p1 p2 [ 2.443690] random: fast init done

[PYBOOT] [wandboard 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 01:46]: got exception: timeout ~$off

[PYBOOT] [wandboard 01:47]: Done.