Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.4-1441-g4f31d77/

Failed boards:

apc arm-vt8500_v6_v7_defconfig : FAILED 3:09.52 arndale arm-exynos_defconfig : FAILED 1:02.33 capri arm-multi_v7_defconfig : FAILED 3:12.76 cosmic arm-imx_v6_v7_defconfig : FAILED 1:44.88 cosmic arm-multi_v7_defconfig : FAILED 1:45.74 wandboard arm-multi_v7_defconfig : FAILED 0:28.85

Successful boards:

arndale arm-multi_v7_defconfig : passed 1:20.40 arndale arm-multi_lpae_defconfig : passed 1:23.29 bbb arm-omap2plus_defconfig : passed 1:45.54 bbb arm-multi_v7_defconfig : passed 1:19.57 beaver arm-tegra_defconfig : warnings 1:41.16 beaver arm-multi_v7_defconfig : warnings 1:36.15 capri arm-bcm_defconfig : passed 0:49.04 chitra powerpc-pasemi_defconfig : passed 2:03.52 chitra powerpc-ppc64_defconfig : passed 2:03.12 colombus arm-sunxi_defconfig : passed 2:31.69 colombus arm-multi_v7_defconfig : passed 2:29.96 colombus arm-multi_lpae_defconfig : passed 2:34.44 cubie arm-sunxi_defconfig : passed 0:51.85 cubie arm-multi_v7_defconfig : warnings 0:59.19 cubie2 arm-sunxi_defconfig : passed 0:57.40 cubie2 arm-multi_v7_defconfig : warnings 1:02.55 cubie2 arm-multi_lpae_defconfig : warnings 1:13.90 cubox arm-multi_v7_defconfig : passed 1:07.12 cubox arm-mvebu_v7_defconfig : passed 1:15.43 dalmore arm-tegra_defconfig : warnings 1:25.65 dalmore arm-multi_v7_defconfig : warnings 1:22.87 dalmore arm-multi_lpae_defconfig : warnings 1:44.19 hummingboard arm-imx_v6_v7_defconfig : passed 1:30.48 hummingboard arm-multi_v7_defconfig : passed 1:17.80 jetsontk1 arm-tegra_defconfig : warnings 1:39.12 jetsontk1 arm-multi_lpae_defconfig : warnings 1:34.25 minnowmax x86-minnowmax_defconfig : passed 1:36.20 odroidu3 arm-exynos_defconfig : warnings 2:03.81 omap5uevm arm-omap2plus_defconfig : passed 1:04.09 omap5uevm arm-multi_v7_defconfig : passed 1:52.70 omap5uevm arm-multi_lpae_defconfig : passed 1:55.04 pandaes arm-omap2plus_defconfig : warnings 1:42.38 pandaes arm-multi_v7_defconfig : passed 1:47.75 parallella arm-multi_v7_defconfig : passed 2:52.38 pi arm-exynos_defconfig : passed 1:39.16 pi arm-multi_v7_defconfig : passed 1:32.01 pi arm-multi_lpae_defconfig : passed 1:44.99 pit arm-exynos_defconfig : passed 1:31.94 pit arm-multi_v7_defconfig : passed 1:33.96 pit arm-multi_lpae_defconfig : passed 1:46.63 seaboard arm-tegra_defconfig : passed 1:04.84 seaboard arm-multi_v7_defconfig : passed 0:59.44 seattle arm64-defconfig : passed 2:11.67 snowball arm-u8500_defconfig : passed 1:12.93 snowball arm-multi_v7_defconfig : passed 1:23.77 socfpga arm-socfpga_defconfig : passed 1:11.68 socfpga arm-multi_v7_defconfig : passed 1:24.21 trimslice arm-tegra_defconfig : passed 1:34.34 wandboard arm-imx_v6_v7_defconfig : passed 1:49.26

Offline boards:

jetsontk1 arm-multi_v7_defconfig : OFFLINE 2:22.95 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:35.64 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.43 sama5 arm-sama5_defconfig : OFFLINE 2:17.36 snow arm-exynos_defconfig : OFFLINE 1:04.06 snow arm-multi_v7_defconfig : OFFLINE 1:03.12 snow arm-multi_lpae_defconfig : OFFLINE 1:03.19 trimslice arm-multi_v7_defconfig : OFFLINE 2:29.17

Board legend is available at http://arm-soc.lixom.net/boards.html

Board apc-arm-vt8500_v6_v7_defconfig failure log: -------------------------------------------------

[ 0.840000] wmt-sdhc d800a000.sdhc: Initial signal voltage of 3.3v [ 0.860000] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0 [ 0.880000] wmt-sdhc d800a000.sdhc: WMT SDHC Controller initialized [ 0.880000] usbcore: registered new interface driver usbhid [ 0.890000] usbhid: USB HID core driver [ 0.890000] NET: Registered protocol family 10 [ 0.890000] mmc0: clock 0Hz busmode 2 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 0.900000] sit: IPv6 over IPv4 tunneling driver [ 0.910000] Key type dns_resolver registered [ 0.910000] vt8500-rtc d8100000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (94668[ 0.920000] Waiting for root device /dev/sda1... [ 1.070000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.220000] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.230000] scsi host0: usb-storage 1-1:1.0 [ 2.270000] scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS [ 4.250000] sd 0:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.260000] sd 0:0:0:0: [sda] Write Protect is off [ 4.260000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 4.270000] sd 0:0:0:0: [sda] No Caching mode page found [ 4.270000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.330000] sda: sda1 [ 4.340000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.350000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 4.670000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.680000] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 4.700000] devtmpfs: mounted [ 4.700000] Freeing unused kernel memory: 172K (c0487000 - c04b2000)

[PYBOOT] [apc 00:36]: kernel: finished booting, starting userspace. version 2[info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 6.220000] udevd[162]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone.

[PYBOOT] [apc 03:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [apc 03:07]: got exception: timeout ~$off

[PYBOOT] [apc 03:08]: Done. Board arndale-arm-exynos_defconfig failure log: -------------------------------------------------

[ 4.050663] Exception stack(0xee095c88 to 0xee095cd0) [ 4.050667] 5c80: c082e060 0000000a f091c000 60000013 00000000 c085b560 [ 4.050672] 5ca0: 00000006 00000036 00000000 00000006 00000000 00000179 00000001 ee095cd8 [ 4.050675] 5cc0: 000f0000 c0064248 60000013 ffffffff [ 4.050681] [<c0013794>] (__irq_svc) from [<c0064248>] (console_unlock+0x33c/0x544) [ 4.050687] [<c0064248>] (console_unlock) from [<c00646e8>] (vprintk_emit+0x298/0x578) [ 4.050692] [<c00646e8>] (vprintk_emit) from [<c0064b24>] (vprintk_default+0x24/0x2c) [ 4.050697] [<c0064b24>] (vprintk_default) from [<c00996b4>] (printk+0x74/0x84) [ 4.050705] [<c00996b4>] (printk) from [<c03e6c84>] (mmc_blk_probe+0x1f8/0x2e0) [ 4.050713] [<c03e6c84>] (mmc_blk_probe) from [<c02c93e4>] (driver_probe_device+0x204/0x2f8) [ 4.050718] [<c02c93e4>] (driver_probe_device) from [<c02c790c>] (bus_for_each_drv+0x64/0x98) [ 4.050722] [<c02c790c>] (bus_for_each_drv) from [<c02c9158>] (__device_attach+0xa4/0x104) [ 4.050726] [<c02c9158>] (__device_attach) from [<c02c8854>] (bus_probe_device+0x84/0x8c) [ 4.050733] [<c02c8854>] (bus_probe_device) from [<c02c6c2c>] (device_add+0x3e4/0x56c) [ 4.050740] [<c02c6c2c>] (device_add) from [<c03d9770>] (mmc_add_card+0x110/0x270) [ 4.050745] [<c03d9770>] (mmc_add_card) from [<c03dc934>] (mmc_attach_mmc+0xa8/0x160) [ 4.050750] [<c03dc934>] (mmc_attach_mmc) from [<c03d9028>] (mmc_rescan+0x2b0/0x34c) [ 4.050757] [<c03d9028>] (mmc_rescan) from [<c0037ea4>] (process_one_work+0x124/0x334) [ 4.050763] [<c0037ea4>] (process_one_work) from [<c00380ec>] (worker_thread+0x38/0x4dc) [ 4.050768] [<c00380ec>] (worker_thread) from [<c003d3e4>] (kthread+0xdc/0xf4) [ 4.050774] [<c003d3e4>] (kthread) from [<c000f738>] (ret_from_fork+0x14/0x3c) [ 4.354506] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 4.421075] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci [ 4.537569] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610 [ 4.542968] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.561063] usb 1-3.2: Product: USB2.0 Hub [ 4.571210] hub 1-3.2:1.0: USB hub found [ 4.573947] hub 1-3.2:1.0: 4 ports detected [ 4.846065] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci [ 4.952194] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a [ 4.957767] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.976063] usb 1-3.2.4: Product: AX88772 [ 4.978675] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. [ 4.991064] usb 1-3.2.4: SerialNumber: 000001 [ 5.002071] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random

[PYBOOT] [arndale 01:00]: got exception: panic ~$off

[PYBOOT] [arndale 01:01]: Done. Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.915000] CPU: 0 PID: 163 Comm: ps Not tainted 4.4.0-01441-g4f31d77 #1 [ 0.915000] Hardware name: BCM281xx Broadcom Application Processor [ 0.915000] task: eb607480 ti: eb5ca000 task.ti: eb5ca000 [ 0.915000] PC is at rb_next+0x34/0x64 [ 0.915000] LR is at proc_readdir_de+0x260/0x2bc [ 0.915000] pc : [<c048f37c>] lr : [<c03645ec>] psr: 20000013 [ 0.915000] sp : eb5cbef0 ip : 00000008 fp : 00000000 [ 0.915000] r10: 0000001c r9 : 00000000 r8 : 00000000 [ 0.915000] r7 : c104ea1c r6 : eb5cbf70 r5 : eb152100 r4 : eb152100 [ 0.915000] r3 : 00a5a500 r2 : 00000000 r1 : 00000051 r0 : eb152130 [ 0.915000] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 0.915000] Control: 10c5387d Table: bb5f004a DAC: 00000051 [ 0.915000] Process ps (pid: 163, stack limit = 0xeb5ca220) [ 0.915000] Stack: (0xeb5cbef0 to 0xeb5cc000) [ 0.915000] bee0: 0000001c 00000000 f0000055 00000000 [ 0.915000] bf00: 00000008 00020008 00000fff eb5cbf70 eb54fa80 eb5cbf70 00000000 ea822090 [ 0.915000] bf20: eb5ca000 00000000 000201f0 c035faa0 c035fa80 eb54fa80 eb54fa88 c0321554 [ 0.915000] bf40: eb503000 00000005 00000005 000410b8 00008000 eb54fa80 eb54fa80 c0210d04 [ 0.915000] bf60: eb5ca000 00000000 000201f0 c0321ae4 c03215d4 00000000 0000001d 00000000 [ 0.915000] bf80: 0004135c 00041348 00007dfc ffffffea b6f8e288 000410b8 00041140 00041144 [ 0.915000] bfa0: 0000008d c0210b40 000410b8 00041140 00000005 00041158 00008000 00041158 [ 0.915000] bfc0: 000410b8 00041140 00041144 0000008d b6eab4c0 00000019 000201e8 000201f0 [ 0.915000] bfe0: 0000008d bee8cb98 b6f1ab0f b6ec2f96 60000030 00000005 00000000 00000000 [ 0.915000] [<c048f37c>] (rb_next) from [<c03645ec>] (proc_readdir_de+0x260/0x2bc) [ 0.915000] [<c03645ec>] (proc_readdir_de) from [<c035faa0>] (proc_root_readdir+0x20/0x44) [ 0.915000] [<c035faa0>] (proc_root_readdir) from [<c0321554>] (iterate_dir+0x7c/0xfc) [ 0.915000] [<c0321554>] (iterate_dir) from [<c0321ae4>] (SyS_getdents+0x78/0x108) [ 0.915000] [<c0321ae4>] (SyS_getdents) from [<c0210b40>] (ret_fast_syscall+0x0/0x3c) [ 0.915000] Code: e3530000 1afffffb e1a00002 e12fff1e (e5931004) [ 0.920000] ---[ end trace e7012f68779690cb ]--- Segmentation fault [....] udev does not support containers, not started ...[?25l[?1c7[warn8[?25h[?0c (warning). [ 36.855000] random: nonblocking pool is initialized

[PYBOOT] [capri 03:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [capri 03:10]: got exception: timeout ~$off

[PYBOOT] [capri 03:12]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 1.701745] mmc0: new high speed SDHC card at address 1234 [ 1.707782] NET: Registered protocol family 29 [ 1.712295] can: raw protocol (rev 20120528) [ 1.721382] can: broadcast manager protocol (rev 20120528 t) [ 1.727382] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 1.735376] can: netlink gateway (rev 20130117) max_hops=1 [ 1.742725] Key type dns_resolver registered [ 1.749887] Registering SWP/SWPB emulation handler [ 1.755457] mmcblk0: p1 p2 p3 [ 1.780283] snvs_rtc 400a7000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 1.909036] ALSA device list: [ 1.912050] No soundcards found. [ 1.927499] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.972887] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.981506] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.008492] devtmpfs: mounted [ 2.014157] Freeing unused kernel memory: 456K (c0a7 [PYBOOT] [cosmic 00:39]: kernel: finished booting, starting userspace. c000 - c0aee000) [ 2.305853] request_module: runaway loop modprobe binfmt-0000 INIT: version 2.88 booting INIT: cannot execute "/etc/init.d/rcS" INIT: Entering runlevel: 2 INIT: cannot execute "/etc/init.d/rc"

Debian GNU/Linux 7.0 (none) ttyLP1

(none) login:root root

Login incorrect (none) login: [PYBOOT] [cosmic 01:41]: Timed out waiting for "<type 'str'>":

Login timed out after 60 seconds.

[PYBOOT] [cosmic 01:42]: got exception: timeout ~$off

[PYBOOT] [cosmic 01:43]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.401695] can: raw protocol (rev 20120528) [ 1.406032] can: broadcast manager protocol (rev 20120528 t) [ 1.411768] can: netlink gateway (rev 20130117) max_hops=1 [ 1.418376] Key type dns_resolver registered [ 1.423053] ThumbEE CPU extension supported. [ 1.427364] Registering SWP/SWPB emulation handler [ 1.440819] hctosys: unable to open rtc device (rtc0) [ 1.464641] Waiting for root device /dev/mmcblk0p3... [ 1.495783] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.507132] mmc0: new high speed SDHC card at address 1234 [ 1.513879] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 1.521278] mmcblk0: p1 p2 p3 [ 1.574660] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.584671] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 1.614158] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.622414] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.643502] devtmpfs: mounted [ 1.649934] Freeing unused kernel memory: 1060K (c0e19000 - c0f22000)

[PYBOOT] [cosmic 00:40]: kernel: finished booting, starting userspace. [ 1.851114] request_module: runaway loop modprobe binfmt-0000 INIT: version 2.88 booting INIT: cannot execute "/etc/init.d/rcS" INIT: Entering runlevel: 2 INIT: cannot execute "/etc/init.d/rc"

Debian GNU/Linux 7.0 (none) ttyLP1

(none) login: root root

Login incorrect (none) login:

[PYBOOT] [cosmic 01:42]: Timed out waiting for "<type 'str'>": Login timed out af [PYBOOT] [cosmic 01:43]: got exception: timeout ~$off

[PYBOOT] [cosmic 01:44]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.100724] WARNING: CPU: 0 PID: 1 at /home/build/work/batch/kernel/workqueue.c:827 wq_worker_waking_up+0x70/0x80() [ 2.111162] Modules linked in: [ 2.114235] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-01441-g4f31d77 #1 [ 2.121371] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 2.127913] [<c021913c>] (unwind_backtrace) from [<c0214838>] (show_stack+0x10/0x14) [ 2.135665] [<c0214838>] (show_stack) from [<c0489500>] (dump_stack+0x8c/0x9c) [ 2.142904] [<c0489500>] (dump_stack) from [<c024ac2c>] (warn_slowpath_common+0x84/0xb4) [ 2.151005] [<c024ac2c>] (warn_slowpath_common) from [<c024acf8>] (warn_slowpath_null+0x1c/0x24) [ 2.159798] [<c024acf8>] (warn_slowpath_null) from [<c0260a58>] (wq_worker_waking_up+0x70/0x80) [ 2.168509] [<c0260a58>] (wq_worker_waking_up) from [<c026bfa4>] (ttwu_do_activate.constprop.11+0x4c/0x64) [ 2.178172] [<c026bfa4>] (ttwu_do_activate.constprop.11) from [<c026cb6c>] (try_to_wake_up+0x1b8/0x338) [ 2.187572] [<c026cb6c>] (try_to_wake_up) from [<c0280268>] (__wake_up_common+0x4c/0x80) [ 2.195670] [<c0280268>] (__wake_up_common) from [<c02802b0>] (__wake_up_locked+0x14/0x1c) [ 2.203939] [<c02802b0>] (__wake_up_locked) from [<c02809e4>] (complete+0x34/0x44) [ 2.211523] [<c02809e4>] (complete) from [<c08603dc>] (sdhci_tasklet_finish+0xa0/0x138) [ 2.219540] [<c08603dc>] (sdhci_tasklet_finish) from [<c024e4cc>] (tasklet_action+0x74/0x110) [ 2.228074] [<c024e4cc>] (tasklet_action) from [<c024e6b8>] (__do_softirq+0xfc/0x214) [ 2.235913] [<c024e6b8>] (__do_softirq) from [<c024ea6c>] (irq_exit+0xb0/0x118) [ 2.243233] [<c024ea6c>] (irq_exit) from [<c028c2b0>] (__handle_domain_irq+0x60/0xb4) [ 2.251071] [<c028c2b0>] (__handle_domain_irq) from [<c020a71c>] (gic_handle_irq+0x54/0x94) [ 2.259428] [<c020a71c>] (gic_handle_irq) from [<c0215394>] (__irq_svc+0x54/0x70) [ 2.266913] Exception stack(0xee055e48 to 0xee055e90) [ 2.271971] 5e40: 0067a654 00000000 ffac8100 c1061044 c1050ef8 00000bb7 [ 2.280153] 5e60: 0067a080 000000c8 c101e7a8 00000001 ffffffea 00000000 00000000 ee055e98 [ 2.288333] 5e80: c04873b0 c0885684 a0000013 ffffffff [ 2.293403] [<c0215394>] (__irq_svc) from [<c0885684>] (imx_read_current_timer+0x8/0x14) [ 2.301507] [<c0885684>] (imx_read_current_timer) from [<c04873b0>] (__timer_delay+0x50/0x60) [ 2.310042] [<c04873b0>] (__timer_delay) from [<c02cdbe0>] (panic+0x254/0x268) [ 2.317277] [<c02cdbe0>] (panic) from [<c0e1a22c>] (mount_block_root+0x21c/0x230) [ 2.324769] [<c0e1a22c>] (mount_block_root) from [<c0e1a35c>] (mount_root+0x11c/0x124) [ 2.332695] [<c0e1a35c>] (mount_root) from [<c0e1a4bc>] (prepare_namespace+0x158/0x1a0) [ 2.340707] [<c0e1a4bc>] (prepare_namespace) from [<c0e19e6c>] (kernel_init_freeable+0x1e8/0x1f8) [ 2.349589] [<c0e19e6c>] (kernel_init_freeable) from [<c09ede08>] (kernel_init+0x8/0xec) [ 2.357688] [<c09ede08>] (kernel_init) from [<c0210bf8>] (ret_from_fork+0x14/0x3c) [ 2.365259] ---[ end trace ce3999d5be4b4d01 ]---

[PYBOOT] [wandboard 00:26]: got exception: panic ~$off

[PYBOOT] [wandboard 00:27]: Done.