Automated DT boot report for various ARM defconfigs.
Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').
Tree/Branch: linus/HEAD Git describe: v3.11-9075-g2b76db6 Commit: 2b76db6a0f Merge tag 'for-linus-3.12-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Failed boot tests (console logs at the end) =========================================== exynos5250-arndale: FAIL: arm-exynos_defconfig
Full Report ===========
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 15.1 sec
arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 8.7 sec omap3-beagle-xm PASS: 0 min 50.6 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec omap3-tobi,3530overo PASS: 0 min 41.3 sec am335x-bone,am335xboneb PASS: 0 min 32.2 sec am335x-bone,am335xbone PASS: 0 min 33.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap4-panda PASS: 0 min 58.8 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 43.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 49.1 sec
arm-exynos_defconfig -------------------- exynos5250-arndale FAIL: 0 min 0.0 sec
arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 51.7 sec am335x-bone,am335xboneb PASS: 0 min 27.4 sec am335x-bone,am335xbone PASS: 0 min 26.8 sec omap3-tobi,3530overo PASS: 0 min 45.9 sec omap4-panda PASS: 1 min 6.4 sec omap4-panda-es PASS: 1 min 7.0 sec omap3-tobi,3730storm PASS: 0 min 44.8 sec omap3-beagle PASS: 0 min 51.5 sec
Console logs for failures =========================
arm-exynos_defconfig --------------------
exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------
ARNDALE5250 # setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ARNDALE5250 #setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' ARNDALE5250 # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi ARNDALE5250 # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ARNDALE5250 # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no ARNDALE5250 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org