Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160509/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:25.55 bbb arm-omap2plus_defconfig : FAILED 1:54.34 bbb arm-multi_v7_defconfig : FAILED 1:58.79 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:03.14 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:48.78 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.21 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:46.06 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:56.44 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.32 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.88 cosmic arm-multi_v7_defconfig : FAILED 2:09.19 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:05.35 dalmore arm-tegra_defconfig : FAILED 1:54.54 dalmore arm-multi_v7_defconfig : FAILED 2:05.16 dalmore arm-multi_lpae_defconfig : FAILED 2:08.92 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.42 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.95 omap5uevm arm-multi_v7_defconfig : FAILED 3:15.07 omap5uevm arm-multi_lpae_defconfig : FAILED 0:58.32 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:40.79 seaboard arm-tegra_defconfig : FAILED 1:53.22 seaboard arm-multi_v7_defconfig : FAILED 2:03.20 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:54.52 snow arm-multi_v7_nosmp_defconfig : FAILED 1:48.57 snowball arm-u8500_defconfig : FAILED 1:58.94 snowball arm-multi_v7_defconfig : FAILED 2:13.46 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:02.34
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.84 arndale arm-exynos_defconfig : passed 1:30.55 arndale arm-multi_v7_defconfig : passed 1:19.26 arndale arm-multi_lpae_defconfig : passed 2:01.55 capri arm-bcm_defconfig : passed 0:50.09 capri arm-multi_v7_defconfig : passed 0:59.04 capri arm-multi_v7_nosmp_defconfig : warnings 0:55.17 chitra powerpc-ppc64_defconfig : passed 3:13.36 colombus arm-sunxi_defconfig : passed 2:29.37 colombus arm-multi_v7_defconfig : passed 2:51.96 colombus arm-multi_lpae_defconfig : passed 2:32.68 cubie arm-sunxi_defconfig : passed 0:51.94 cubie arm-multi_v7_defconfig : passed 0:49.03 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.07 cubie2 arm-sunxi_defconfig : passed 1:02.02 cubie2 arm-multi_v7_defconfig : passed 0:53.02 cubie2 arm-multi_lpae_defconfig : passed 0:56.34 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:01.90 cubox arm-multi_v7_defconfig : passed 1:23.11 cubox arm-mvebu_v7_defconfig : passed 1:12.10 cubox arm-multi_v7_nosmp_defconfig : passed 1:14.43 hummingboard arm-imx_v6_v7_defconfig : passed 1:34.70 hummingboard arm-multi_v7_defconfig : passed 2:19.52 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:11.54 jetsontk1 arm-tegra_defconfig : warnings 0:53.24 jetsontk1 arm-multi_v7_defconfig : warnings 0:48.87 jetsontk1 arm-multi_lpae_defconfig : warnings 0:51.05 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.21 omap5uevm arm-omap2plus_defconfig : passed 1:05.71 pandaes arm-omap2plus_defconfig : warnings 1:44.59 pandaes arm-multi_v7_defconfig : passed 1:43.51 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:46.92 pi arm-exynos_defconfig : passed 2:10.97 pi arm-multi_v7_defconfig : passed 2:13.35 pi arm-multi_lpae_defconfig : passed 2:33.80 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.05 pit arm-exynos_defconfig : passed 2:10.14 pit arm-multi_v7_defconfig : passed 2:11.10 pit arm-multi_lpae_defconfig : passed 2:17.50 pit arm-multi_v7_nosmp_defconfig : warnings 2:11.64 seattle arm64-defconfig : passed 2:47.33 snow arm-exynos_defconfig : passed 2:10.17 snow arm-multi_v7_defconfig : passed 2:09.18 snow arm-multi_lpae_defconfig : passed 1:59.25 trimslice arm-tegra_defconfig : warnings 2:42.81 trimslice arm-multi_v7_defconfig : warnings 2:30.40 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:35.29 wandboard arm-imx_v6_v7_defconfig : passed 1:10.11 wandboard arm-multi_v7_defconfig : passed 1:16.39 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:21.57
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:11.10 beaver arm-multi_v7_defconfig : OFFLINE 2:25.57 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.21 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.19 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:42.87 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:25.81 parallella arm-multi_v7_defconfig : OFFLINE 2:38.86 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.26 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.17 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:49.31 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 1:00.74 sama5 arm-sama5_defconfig : OFFLINE 2:24.53 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:45.73 socfpga arm-socfpga_defconfig : OFFLINE 2:18.66 socfpga arm-multi_v7_defconfig : OFFLINE 2:28.21 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.94
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
MAIN_DC: disabling hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 Booting Linux on physical CPU 0x0 Linux version 4.6.0-rc7-next-20160509 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Sun May 8 23:04:02 PDT 2016 CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [c10b37a8] *pgd=4100041e(bad) CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Modules linked in: Machine model: Insignal Arndale evaluation board based on EXYNOS5250 cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc3e4, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc7-next-20160509 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030e73c>] (unwind_backtrace) from [<c030b2dc>] (show_stack+0x10/0x14) [<c030b2dc>] (show_stack) from [<c0336264>] (__warn+0xe4/0xfc) [<c0336264>] (__warn) from [<c03362b4>] (warn_slowpath_fmt+0x38/0x48) [<c03362b4>] (warn_slowpath_fmt) from [<c0f040a8>] (arm_dt_init_cpu_maps+0xf8/0x134) [<c0f040a8>] (arm_dt_init_cpu_maps) from [<c0f03388>] (setup_arch+0x780/0x944) [<c0f03388>] (setup_arch) from [<c0f00940>] (start_kernel+0x68/0x374) [<c0f00940>] (start_kernel) from [<40208078>] (0x40208078)
[PYBOOT] [arndale 02:22]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:23]: got exception: timeout ~$off
[PYBOOT] [arndale 02:25]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.566281] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.631586] Synopsys Designware Multimedia Card Interface Driver [ 1.639391] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649365] ledtrig-cpu: registered to indicate activity on CPUs [ 1.656602] usbcore: registered new interface driver usbhid [ 1.662520] usbhid: USB HID core driver [ 1.674563] NET: Registered protocol family 10 [ 1.681081] sit: IPv6 over IPv4 tunneling driver [ 1.687230] NET: Registered protocol family 17 [ 1.692001] can: controller area network core (rev 20120528 abi 9) [ 1.698652] NET: Registered protocol family 29 [ 1.703359] can: raw protocol (rev 20120528) [ 1.707880] can: broadcast manager protocol (rev 20120528 t) [ 1.713875] can: netlink gateway (rev 20130117) max_hops=1 [ 1.720624] Key type dns_resolver registered [ 1.725491] omap_voltage_late_init: Voltage driver support not added [ 1.732451] ThumbEE CPU extension supported. [ 1.737003] Registering SWP/SWPB emulation handler [ 1.781620] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788063] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795793] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.804416] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812250] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820000] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827745] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.835094] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.842156] hctosys: unable to open rtc device (rtc0) [ 1.855558] Waiting for root device /dev/mmcblk0p2... [ 1.861290] mmc1: new high speed MMC card at address 0001 [ 1.868095] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873369] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880017] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.888636] mmcblk1: p1 p2
[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:56]: got exception: timeout ~$off
[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:00]: got exception: timeout ~$off
[PYBOOT] [bbb 02:01]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.064708] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.070836] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.077175] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.084061] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.093674] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.103188] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.110216] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.153290] ledtrig-cpu: registered to indicate activity on CPUs [ 2.161969] oprofile: using arm/armv7 [ 2.166938] Initializing XFRM netlink socket [ 2.172068] NET: Registered protocol family 10 [ 2.182483] sit: IPv6 over IPv4 tunneling driver [ 2.191460] NET: Registered protocol family 17 [ 2.196387] NET: Registered protocol family 15 [ 2.201606] Key type dns_resolver registered [ 2.206462] omap_voltage_late_init: Voltage driver support not added [ 2.213207] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.221687] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.231298] ThumbEE CPU extension supported. [ 2.235925] Registering SWP/SWPB emulation handler [ 2.240953] SmartReflex Class3 initialized [ 2.313754] mmc1: new high speed MMC card at address 0001 [ 2.325652] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.333177] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.341284] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.348509] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.360598] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.367915] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.378770] hctosys: unable to open rtc device (rtc0) [ 2.384225] sr_init: No PMIC hook to init smartreflex [ 2.389921] sr_init: platform driver register failed for SR [ 2.432812] mmcblk1: p1 p2 [ 2.450963] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.166103] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.180860] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.187942] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.210584] rtc-ds1307 2-006f: SET TIME! [ 2.216321] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.223071] rtc-ds1307 2-006f: 64 bytes nvram [ 2.227683] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.235926] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.241707] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.249953] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.259110] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.265990] hub 1-0:1.0: USB hub found [ 2.269943] hub 1-0:1.0: 1 port detected [ 2.274348] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.280130] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.288235] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.297264] hub 2-0:1.0: USB hub found [ 2.301232] hub 2-0:1.0: 1 port detected [ 2.307342] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.371621] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.389805] aic_dvdd_fixed: disabling [ 2.394506] Waiting for root device /dev/mmcblk0p1... [ 2.427156] mmc1: new high speed MMC card at address 0001 [ 2.433197] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.438115] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.444467] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.451412] mmcblk1: p1 [ 2.580080] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.736384] hub 1-1:1.0: USB hub found [ 2.740376] hub 1-1:1.0: 4 ports detected [ 2.820113] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.848379] hub 2-1:1.0: USB hub found [ 2.852364] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.175863] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.190557] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.197635] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.220114] rtc-ds1307 2-006f: SET TIME! [ 2.225843] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.232593] rtc-ds1307 2-006f: 64 bytes nvram [ 2.237209] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.245454] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.251243] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.259484] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.268648] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.275536] hub 1-0:1.0: USB hub found [ 2.279495] hub 1-0:1.0: 1 port detected [ 2.283904] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.289681] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.297797] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.306822] hub 2-0:1.0: USB hub found [ 2.310789] hub 2-0:1.0: 1 port detected [ 2.316894] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.381255] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.399347] aic_dvdd_fixed: disabling [ 2.404050] Waiting for root device /dev/mmcblk0p1... [ 2.431687] mmc1: new high speed MMC card at address 0001 [ 2.437715] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.442629] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.448981] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.455892] mmcblk1: p1 [ 2.589623] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.745928] hub 1-1:1.0: USB hub found [ 2.749919] hub 1-1:1.0: 4 ports detected [ 2.829656] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.857924] hub 2-1:1.0: USB hub found [ 2.861913] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:54]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:55]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.270487] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.276818] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.283688] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.294085] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.298953] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.305252] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.312123] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.321726] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.331240] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.338300] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.387450] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.393752] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.400629] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.410229] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.419731] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.426787] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.432911] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.439231] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.446083] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.455680] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.465186] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.472238] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.517645] hctosys: unable to open rtc device (rtc0) [ 4.522943] sr_init: No PMIC hook to init smartreflex [ 4.528462] sr_init: platform driver register failed for SR [ 4.569192] mmc1: new high speed MMC card at address 0001 [ 4.573521] aic_dvdd_fixed: disabling [ 4.578933] ldousb: disabling [ 4.581184] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.581894] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.582617] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.601007] mmcblk1: p1 [ 4.608845] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
eth0: device MAC address 86:8e:13:d6:46:da RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/86:8e:13:d6:46:da Sending on LPF/eth0/86:8e:13:d6:46:da Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
[PYBOOT] [colombus 03:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:17]: got exception: timeout ~$off
[PYBOOT] [colombus 03:18]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.433327] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.507570] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.517901] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.592113] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.602441] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.676611] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.686935] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.761151] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.771479] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.845647] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.855974] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.930193] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.940518] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.014710] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.025044] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.099266] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.109652] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.183811] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.194130] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.268352] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.278672] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.352884] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.363209] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.437434] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.447755] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.521966] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.532291] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.606459] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.616784] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.691004] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.701330] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.775490] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.785813] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.063433] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.137421] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.147510] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.221501] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.231580] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.305563] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.315640] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.389620] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.399701] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.473693] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.483788] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.557781] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.567851] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.641840] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.651911] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.725890] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.735961] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.809953] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.820022] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.894005] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.904089] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.978073] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.988141] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.062125] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.072200] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.146186] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.156261] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.230244] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.240321] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.314308] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.324389] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.398369] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.408448] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.803850] can: netlink gateway (rev 20130117) max_hops=1 [ 2.810839] Key type dns_resolver registered [ 2.817281] ThumbEE CPU extension supported. [ 2.821670] Registering SWP/SWPB emulation handler [ 2.835489] usb1_vbus: supplied by vdd-sys-5v0 [ 2.845632] usb2_vbus: supplied by vdd-sys-5v0 [ 2.864145] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.885038] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.891842] [drm] No driver support for vblank timestamp query. [ 2.917393] mmc1: new high speed MMC card at address 0001 [ 2.927701] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.934701] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.944700] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.953946] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.964185] mmcblk1: p1 [ 3.072978] Console: switching to colour frame buffer device 240x75 [ 3.162193] drm drm: fb0: frame buffer device [ 3.186223] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.201208] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.206792] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.215536] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.231257] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.241624] hub 1-0:1.0: USB hub found [ 3.245631] hub 1-0:1.0: 1 port detected [ 3.256171] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.270643] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.332357] dvdd_ts: disabling [ 3.335468] usb1_vbus: disabling [ 3.338875] vdd_cam_1v8_reg: disabling [ 3.346546] Waiting for root device /dev/mmcblk0p1... [ 3.561275] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.540170] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.516231] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:07]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:08]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.800881] can: netlink gateway (rev 20130117) max_hops=1 [ 2.807854] Key type dns_resolver registered [ 2.814210] ThumbEE CPU extension supported. [ 2.818607] Registering SWP/SWPB emulation handler [ 2.831739] usb1_vbus: supplied by vdd-sys-5v0 [ 2.839406] usb2_vbus: supplied by vdd-sys-5v0 [ 2.858636] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.880023] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.886825] [drm] No driver support for vblank timestamp query. [ 2.906825] mmc1: new high speed MMC card at address 0001 [ 2.915745] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.922420] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.930381] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.939995] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.950435] mmcblk1: p1 [ 3.062407] Console: switching to colour frame buffer device 240x75 [ 3.151581] drm drm: fb0: frame buffer device [ 3.176316] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.191315] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.196923] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.205683] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.221351] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.231651] hub 1-0:1.0: USB hub found [ 3.235649] hub 1-0:1.0: 1 port detected [ 3.245917] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.260313] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.322184] dvdd_ts: disabling [ 3.325297] usb1_vbus: disabling [ 3.328699] vdd_cam_1v8_reg: disabling [ 3.336330] Waiting for root device /dev/mmcblk0p1... [ 3.551374] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.530056] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.677254] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:02]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:03]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.443070] Bluetooth: RFCOMM socket layer initialized [ 5.448290] Bluetooth: RFCOMM ver 1.11 [ 5.452103] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.457599] Bluetooth: BNEP socket layer initialized [ 5.462665] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.468672] Bluetooth: HIDP socket layer initialized [ 5.474980] Key type dns_resolver registered [ 5.484416] Registering SWP/SWPB emulation handler [ 5.503003] usb1_vbus: supplied by vdd-sys-5v0 [ 5.513272] usb2_vbus: supplied by vdd-sys-5v0 [ 5.530270] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.560822] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.567632] [drm] No driver support for vblank timestamp query. [ 5.745438] Console: switching to colour frame buffer device 240x75 [ 5.834688] drm drm: fb0: frame buffer device [ 5.862774] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.871886] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.877744] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.886882] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.912778] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.926148] hub 1-0:1.0: USB hub found [ 5.930188] hub 1-0:1.0: 1 port detected [ 5.944209] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.958259] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.039089] dvdd_ts: disabling [ 6.042196] usb1_vbus: disabling [ 6.045618] vdd_cam_1v8_reg: disabling [ 6.050261] ALSA device list: [ 6.053339] #0: NVIDIA Tegra Dalmore [ 6.059052] Waiting for root device /dev/mmcblk0p1... [ 6.252744] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.287099] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.842721] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.719322] Key type dns_resolver registered [ 1.723640] Registering SWP/SWPB emulation handler [ 1.731532] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.736201] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.743608] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.750755] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.757379] [drm] No driver support for vblank timestamp query. [ 1.763288] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.769701] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.774812] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.781801] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.787443] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.787473] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.804399] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.805172] hub 1-3:1.0: USB hub found [ 1.805325] hub 1-3:1.0: 3 ports detected [ 1.807044] max98090 1-0010: MAX98090 REVID=0x43 [ 1.809343] max98090 1-0010: use default 2.8v micbias [ 1.831729] mmc1: new DDR MMC card at address 0001 [ 1.835218] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.838941] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.849642] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.853808] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.859691] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.865607] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.872297] mmcblk1: p1 p2 [ 1.873822] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.901332] VDD10_HDMI_1.0V: disabling [ 1.902103] vdd_g3d: disabling [ 1.903131] BUCK8_2.8V: disabling [ 1.907232] ALSA device list: [ 1.908725] #0: Odroid-U3 [ 1.912646] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.150784] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.161225] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 2.169692] pgd = c0204000 [ 2.172517] [00000014] *pgd=00000000 [ 2.176256] Internal error: Oops: 5 [#1] SMP ARM [ 2.181084] Modules linked in: [ 2.184281] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc7-next-20160509 #1 [ 2.192020] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.198305] task: c1306480 ti: c1300000 task.ti: c1300000 [ 2.203957] PC is at __irq_wake_thread+0x0/0x68 [ 2.208695] LR is at handle_irq_event_percpu+0x74/0x14c [ 2.214162] pc : [<c0385b3c>] lr : [<c0385c18>] psr: 20000193 [ 2.214162] sp : c1301eb8 ip : 7340002f fp : c0ef0cbc [ 2.226174] r10: c140ae6a r9 : ee1840c0 r8 : 00000127 [ 2.231639] r7 : 00000000 r6 : 00000000 r5 : 00000002 r4 : ee60c8c0 [ 2.238463] r3 : 20000193 r2 : 00000004 r1 : 00000000 r0 : ee1840c0 [ 2.245293] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.252848] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.258860] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.265143] Stack: (0xc1301eb8 to 0xc1302000) [ 2.269697] 1ea0: 77359400 c1302510 [ 2.278255] 1ec0: c1211ef0 c0ef0ce4 00000000 ee1840c0 ee184120 00000000 00000001 ee008000 [ 2.286815] 1ee0: fa213000 c140ae68 c1302510 c0385d34 ee1840c0 c130a9a8 00000000 c0388f60 [ 2.295372] 1f00: c12124dc 00000000 00000000 c0385294 c12124dc c0385544 c1302870 c1340578 [ 2.303928] 1f20: fa21200c c1301f50 fa212000 c03017a0 c0308780 a0000013 ffffffff c1301f84 [ 2.312488] 1f40: c1213580 c1302508 c140ae68 c030c514 00000001 00000000 ea000013 f0880000 [ 2.321044] 1f60: c1300000 c13024a4 00000000 00000000 c1213580 c1302508 c140ae68 c1302510 [ 2.329601] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.338158] 1fa0: c1300000 c03791c8 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.346716] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a5a30 c140d5d4 c1302480 [ 2.355274] 1fe0: c11a5a2c c130764c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.363838] [<c0385b3c>] (__irq_wake_thread) from [<c0ef0ce4>] (__func__.17985+0x152168/0x24f484) [ 2.373126] Code: e34c00ef eb011837 e594303c eaffff88 (e5913014) [ 2.379506] ---[ end trace 8780e49b7e3425ed ]--- [ 2.384336] Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:56]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:57]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.941097] mmc0: new high speed MMC card at address 0001 [ 1.947124] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.952047] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.958413] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.965942] SMPS6: supplied by vsys_cobra [ 1.970467] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.978063] SMPS7: supplied by vsys_cobra [ 1.982987] vdds_1v8_main: supplied by smps7 [ 1.988333] SMPS8: supplied by vsys_cobra [ 1.994048] SMPS9: supplied by vsys_cobra [ 1.998576] smps9: Bringing 0uV into 2100000-2100000uV [ 2.006550] LDO1: supplied by vsys_cobra [ 2.010984] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.017356] LDO2: supplied by vsys_cobra [ 2.018733] smsc95xx v1.0.4 [ 2.024716] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.031109] LDO3: supplied by vdds_1v8_main [ 2.037099] LDO4: supplied by vdds_1v8_main [ 2.041794] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.048156] LDO5: supplied by vsys_cobra [ 2.053915] LDO6: supplied by vdds_1v8_main [ 2.061419] LDO7: supplied by vsys_cobra [ 2.065836] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.068746] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, f6:38:a4:20:fa:6d [ 2.083883] LDO8: supplied by vsys_cobra [ 2.089635] LDO9: supplied by vmmcsd_fixed [ 2.095702] LDOLN: supplied by vsys_cobra [ 2.101532] LDOUSB: supplied by vsys_cobra [ 2.110401] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.134933] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.142592] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.150491] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz[ [ 2 .2.159169] pgd = c0204000
[PYBOOT] [omap5uevm 03:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 03:12]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 03:14]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
d0c0: ee44e200 00000000 d0e0: ffffffff 00000000 ee44e200 00000000 c1035d50 00000000 ee44e42c c0aa1ec0 d100: c034e12a ee4fd174 ee06c8b8 ee4fd128 c0349d9c c034e128 20000193 ffffffff [<c030bca0>] (__dabt_svc) from [<c034e128>] (kthread_data+0x4/0xc) [<c034e128>] (kthread_data) from [<c0349d9c>] (wq_worker_sleeping+0x8/0xb8) [<c0349d9c>] (wq_worker_sleeping) from [<c0aa1d28>] (__schedule+0x310/0x464) [<c0aa1d28>] (__schedule) from [<c0aa1ec0>] (schedule+0x44/0x9c) [<c0aa1ec0>] (schedule) from [<c03378f0>] (do_exit+0x7b8/0x90c) [<c03378f0>] (do_exit) from [<c030b608>] (die+0x328/0x394) [<c030b608>] (die) from [<c031a350>] (__do_kernel_fault.part.0+0x64/0x1e4) [<c031a350>] (__do_kernel_fault.part.0) from [<c0315628>] (do_page_fault+0x370/0x384) [<c0315628>] (do_page_fault) from [<c0301280>] (do_DataAbort+0x3c/0xb8) [<c0301280>] (do_DataAbort) from [<c030bca0>] (__dabt_svc+0x40/0x60) Exception stack(0xee4fd310 to 0xee4fd358) d300: ee44e200 00000000 ffffffff 00000000 d320: ee44e200 00000000 c1035d50 00000000 ee44e42c c0aa1ec0 c034e12a ee4fd3ac d340: ee06c8b8 ee4fd360 c0349d9c c034e128 20000193 ffffffff [<c030bca0>] (__dabt_svc) from [<c034e128>] (kthread_data+0x4/0xc) [<c034e128>] (kthread_data) from [<c0349d9c>] (wq_worker_sleeping+0x8/0xb8) [<c0349d9c>] (wq_worker_sleeping) from [<c0aa1d28>] (__schedule+0x310/0x464) [<c0aa1d28>] (__schedule) from [<c0aa1ec0>] (schedule+0x44/0x9c) [<c0aa1ec0>] (schedule) from [<c03378f0>] (do_exit+0x7b8/0x90c) [<c03378f0>] (do_exit) from [<c030b608>] (die+0x328/0x394) [<c030b608>] (die) from [<c031a350>] (__do_kernel_fault.part.0+0x64/0x1e4) [<c031a350>] (__do_kernel_fault.part.0) from [<c0315628>] (do_page_fault+0x370/0x384) [<c0315628>] (do_page_fault) from [<c0301280>] (do_DataAbort+0x3c/0xb8) [<c0301280>] (do_DataAbort) from [<c030bca0>] (__dabt_svc+0x40/0x60) Exception stack(0xee4fd548 to 0xee4fd590) d540: ee44e200 00000000 ffffffff 00000000 ee44e200 00000000 d560: c1035d50 00000000 ee44e42c c0aa1ec0 c034e12a ee4fd5e4 ee06c8b8 ee4fd598 d580: c0349d9c c034e128 20000193 ffffffff [<c030bca0>] (__dabt_svc) from [<c034e128>] (kthread_data+0x4/0xc) [<c034e128>] (kthread_data) from [<c0349d9c>] (wq_worker_sleeping+0x8/0xb8) [<c0349d9c>] (wq_worker_sleeping) from [<c0aa1d28>] (__schedule+0x310/0x464) [<c0aa1d28>] (__schedule) from [<c0aa1ec0>] (schedule+0x44/0x9c) [<c0aa1ec0>] [PYBOOT] [omap5uevm 01:39]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:40]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.877855] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.884875] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.884896] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.884916] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.885137] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.901482] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.902067] hub 3-0:1.0: USB hub found [ 1.902096] hub 3-0:1.0: 1 port detected [ 1.937746] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.944387] [drm] No driver support for vblank timestamp query. [ 1.978429] mmc2: switch to bus width 8 failed [ 1.978701] mmc2: switch to bus width 4 failed [ 1.978717] mmc2: new high speed MMC card at address 0001 [ 1.980247] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.982472] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.982722] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.984089] mmcblk2: p3 [ 2.003168] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.011127] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.013990] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.033350] Console: switching to colour frame buffer device 170x48 [ 2.106538] drm drm: fb0: frame buffer device [ 2.112258] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.126495] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.133384] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.140529] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.155285] vdd_1v5: disabling [ 2.158391] vdd_1v2: disabling [ 2.163405] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.173927] mmc0: new SDIO card at address 0001 [ 2.879682] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.891110] Waiting for root device /dev/mmcblk0p3... [ 58.161606] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:01]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:02]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.410115] can: raw protocol (rev 20120528) [ 4.414406] can: broadcast manager protocol (rev 20120528 t) [ 4.420171] can: netlink gateway (rev 20130117) max_hops=1 [ 4.455585] Bluetooth: RFCOMM socket layer initialized [ 4.460772] Bluetooth: RFCOMM ver 1.11 [ 4.464556] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.469973] Bluetooth: BNEP socket layer initialized [ 4.474942] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.481530] Bluetooth: HIDP socket layer initialized [ 4.487234] Key type dns_resolver registered [ 4.492973] Registering SWP/SWPB emulation handler [ 4.508561] VDDIO_HDMI: supplied by vdd_5v0 [ 4.515529] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.527460] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.533934] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.539441] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.547826] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.565183] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.574903] hub 3-0:1.0: USB hub found [ 4.578792] hub 3-0:1.0: 1 port detected [ 4.593248] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.599932] [drm] No driver support for vblank timestamp query. [ 4.713412] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.732584] Console: switching to colour frame buffer device 170x48 [ 4.772015] drm drm: fb0: frame buffer device [ 4.805157] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.812309] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.819941] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.838930] vdd_1v5: disabling [ 4.841983] vdd_1v2: disabling [ 4.845165] ALSA device list: [ 4.848126] #0: NVIDIA Tegra Seaboard [ 4.852610] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:51]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@snow:~# cat /proc/cmdline cat /proc/cmdline console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait root@snow:~# uname -r uname Unable to handle kernel paging request at virtual address c10b37a8 pgd = c0204000 [c10b37a8] *pgd=4100041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc7-next-20160509 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f70 ti: c1000000 task.ti: c1000000 PC is at 0xc10b37a8 LR is at cpu_pm_pmu_notify+0x70/0xb4 pc : [<c10b37a8>] lr : [<c09950c4>] psr: 600001d3 sp : c1001f88 ip : 00000000 fp : 000000a0 r10: 00000000 r9 : 00000001 r8 : a3896dac r7 : 00000001 r6 : c10b37b0 r5 : c10b42f0 r4 : c100212c r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6d470059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f88 to 0xc1002000) 1f80: c10fe01d c1002134 c10b37b0 c10b4250 c1001fac c0aa1ec0 1fa0: c1000000 c100212c c1001fb4 c0aa20c4 00000000 c035898c ffffffff c0f00c40 1fc0: ffffffff ffffffff 00000000 c0f00684 00000000 c0f89a20 c11001d4 c10020b4 1fe0: c0f89a1c c1007134 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c09950c4>] (cpu_pm_pmu_notify) from [<c0aa1ec0>] (schedule+0x44/0x9c) Code: c10b3794 c10b38e0 c10b38e0 00000000 (c10b37b0) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 01:46]: got exception: ERROR: Timeout waiting for command: uname -r. ~$off
[PYBOOT] [snow 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.975982] NET: Registered protocol family 29 [ 1.980468] can: raw protocol (rev 20120528) [ 1.984771] can: broadcast manager protocol (rev 20120528 t) [ 1.990478] can: netlink gateway (rev 20130117) max_hops=1 [ 1.996856] Key type dns_resolver registered [ 2.000488] mmc3: new high speed MMC card at address 0001 [ 2.001495] mmcblk3: mmc3:0001 3.53 GiB [ 2.001892] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.002227] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.002532] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.007873] mmcblk3: p1 p2 p3 p4 [ 2.030395] ThumbEE CPU extension supported. [ 2.034729] Registering SWP/SWPB emulation handler [ 2.042205] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.049011] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.058166] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.065216] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.072204] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.079193] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.092529] db8500-esram12: disabling [ 2.096343] db8500-esram34: disabling [ 2.100067] en-3v3-fixed-supply: disabling [ 2.104431] V-CSI/DSI: disabling [ 2.107696] mmci-reg: disabling [ 2.111358] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.117370] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.123748] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:11]: got exception: timeout ~$off
[PYBOOT] [snowball 02:12]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling en-3v3-fixed-supply: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:00]: got exception: timeout ~$off
[PYBOOT] [snowball 02:01]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.575103] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.587615] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.598419] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.608367] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.619110] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.642700] NET: Registered protocol family 10 [ 2.647979] sit: IPv6 over IPv4 tunneling driver [ 2.653381] NET: Registered protocol family 17 [ 2.657867] NET: Registered protocol family 35 [ 2.662414] NET: Registered protocol family 37 [ 2.666961] Registering SWP/SWPB emulation handler [ 2.673400] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.685546] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-20 03:11:42 UTC (956200302) [ 2.694732] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.701873] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.708923] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.715942] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.729614] db8500-esram12: disabling [ 2.733428] db8500-esram34: disabling [ 2.737121] en-3v3-fixed-supply: disabling [ 2.741424] V-CSI/DSI: disabling [ 2.744689] mmci-reg: disabling [ 2.747985] ALSA device list: [ 2.750976] #0: MOP500-card [ 2.754272] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.760253] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.766448] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter