Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.4-rc3-1068-g174bb68/
Failed boards:
capri arm-multi_v7_defconfig : FAILED 0:41.30 colombus arm-multi_v7_defconfig : FAILED 3:11.14 cosmic arm-imx_v6_v7_defconfig : FAILED 1:44.84 cosmic arm-multi_v7_defconfig : FAILED 1:46.69 snowball arm-u8500_defconfig : FAILED 2:06.27
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.46 arndale arm-exynos_defconfig : passed 1:30.18 arndale arm-multi_v7_defconfig : passed 1:26.65 arndale arm-multi_lpae_defconfig : passed 1:33.97 bbb arm-omap2plus_defconfig : passed 1:44.30 bbb arm-multi_v7_defconfig : passed 1:19.34 beaver arm-tegra_defconfig : passed 1:32.59 beaver arm-multi_v7_defconfig : passed 1:51.48 capri arm-bcm_defconfig : passed 0:54.24 chitra powerpc-pasemi_defconfig : passed 2:02.31 chitra powerpc-ppc64_defconfig : passed 2:59.28 colombus arm-sunxi_defconfig : passed 2:22.66 colombus arm-multi_lpae_defconfig : passed 2:28.94 cubie arm-sunxi_defconfig : passed 0:56.65 cubie arm-multi_v7_defconfig : passed 0:49.25 cubie2 arm-sunxi_defconfig : passed 0:52.05 cubie2 arm-multi_v7_defconfig : passed 0:50.25 cubie2 arm-multi_lpae_defconfig : passed 0:49.10 cubox arm-multi_v7_defconfig : passed 1:11.89 cubox arm-mvebu_v7_defconfig : passed 1:11.46 dalmore arm-tegra_defconfig : passed 1:23.58 dalmore arm-multi_v7_defconfig : passed 1:27.80 dalmore arm-multi_lpae_defconfig : passed 1:32.78 hummingboard arm-imx_v6_v7_defconfig : passed 1:32.46 hummingboard arm-multi_v7_defconfig : passed 1:21.56 jetsontk1 arm-tegra_defconfig : passed 1:36.83 jetsontk1 arm-multi_v7_defconfig : passed 1:42.61 jetsontk1 arm-multi_lpae_defconfig : passed 1:30.87 minnowmax x86-minnowmax_defconfig : passed 1:32.43 odroidu3 arm-exynos_defconfig : passed 2:05.06 omap5uevm arm-omap2plus_defconfig : passed 1:04.66 omap5uevm arm-multi_v7_defconfig : passed 2:04.33 omap5uevm arm-multi_lpae_defconfig : passed 1:58.52 pandaes arm-omap2plus_defconfig : warnings 1:41.66 pandaes arm-multi_v7_defconfig : passed 1:47.02 parallella arm-multi_v7_defconfig : passed 2:40.65 pi arm-exynos_defconfig : passed 2:14.27 pi arm-multi_v7_defconfig : passed 2:21.29 pi arm-multi_lpae_defconfig : passed 2:17.32 pit arm-exynos_defconfig : passed 2:13.16 pit arm-multi_v7_defconfig : passed 2:22.30 pit arm-multi_lpae_defconfig : passed 2:12.63 seaboard arm-tegra_defconfig : passed 0:55.86 seaboard arm-multi_v7_defconfig : passed 1:02.85 seattle arm64-defconfig : passed 2:21.14 snowball arm-multi_v7_defconfig : passed 1:30.91 socfpga arm-socfpga_defconfig : passed 1:15.42 socfpga arm-multi_v7_defconfig : passed 1:21.12 trimslice arm-tegra_defconfig : passed 1:33.33 trimslice arm-multi_v7_defconfig : passed 1:39.76 wandboard arm-imx_v6_v7_defconfig : passed 1:45.74 wandboard arm-multi_v7_defconfig : passed 1:40.28
Offline boards:
rk3288evb arm-multi_v7_defconfig : OFFLINE 0:54.46 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:41.75 sama5 arm-sama5_defconfig : OFFLINE 2:23.25 snow arm-exynos_defconfig : OFFLINE 1:03.66 snow arm-multi_v7_defconfig : OFFLINE 1:03.39 snow arm-multi_lpae_defconfig : OFFLINE 1:03.46
Board legend is available at http://arm-soc.lixom.net/boards.html
Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.755000] [<c0904768>] (ops_init.constprop.5) from [<c0904854>] (register_pernet_operations+0x78/0xbc) [ 0.755000] [<c0904854>] (register_pernet_operations) from [<c09048c4>] (register_pernet_subsys+0x2c/0x40) [ 0.760000] [<c09048c4>] (register_pernet_subsys) from [<c0eb745c>] (init_rpcsec_gss+0x2c/0x6c) [ 0.765000] [<c0eb745c>] (init_rpcsec_gss) from [<c020ad54>] (do_one_initcall+0x90/0x1d8) [ 0.770000] [<c020ad54>] (do_one_initcall) from [<c0e2cddc>] (kernel_init_freeable+0x158/0x1f8) [ 0.775000] [<c0e2cddc>] (kernel_init_freeable) from [<c09fdc1c>] (kernel_init+0x8/0xe8) [ 0.780000] [<c09fdc1c>] (kernel_init) from [<c0210c38>] (ret_from_fork+0x14/0x3c) [ 0.785000] Code: e5820000 e583e000 0581e000 08bd8030 (e59c2008) [ 0.785000] ---[ end trace bcf771927b484b7e ]--- [ 0.790000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.790000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.790000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.790000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.795000] Alternate GPT is invalid, using primary GPT. [ 0.795000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.805000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.805000] [ 0.810000] CPU0: stopping [ 0.810000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.4.0-rc3-01068-g174bb68 #1 [ 0.810000] Hardware name: BCM281xx Broadcom Application Processor [ 0.810000] [<c02191bc>] (unwind_backtrace) from [<c021488c>] (show_stack+0x10/0x14) [ 0.810000] [<c021488c>] (show_stack) from [<c04882c0>] (dump_stack+0x8c/0x9c) [ 0.810000] [<c04882c0>] (dump_stack) from [<c0217934>] (handle_IPI+0x188/0x1a8) [ 0.810000] [<c0217934>] (handle_IPI) from [<c020a744>] (gic_handle_irq+0x90/0x94) [ 0.810000] [<c020a744>] (gic_handle_irq) from [<c0215414>] (__irq_svc+0x54/0x70) [ 0.810000] Exception stack(0xc0f39f48 to 0xc0f39f90) [ 0.810000] 9f40: 00000001 00000000 00000000 c0223980 c0f3a4a4 00000000 [ 0.810000] 9f60: 00000000 c0f39fa0 c0f3a504 c0a0b6d0 c0f38000 c0f3a50c 2aa82000 c0f39f98 [ 0.810000] 9f80: c021166c c0211670 60000013 ffffffff [ 0.810000] [<c0215414>] (__irq_svc) from [<c0211670>] (arch_cpu_idle+0x38/0x3c) [ 0.810000] [<c0211670>] (arch_cpu_idle) from [<c0280b1c>] (cpu_startup_entry+0x1ec/0x248) [ 0.810000] [<c0280b1c>] (cpu_startup_entry) from [<c0e2cc78>] (start_kernel+0x3a8/0x3b4) [ 0.810000] [<c0e2cc78>] (start_kernel) from [<9020807c>] (0x9020807c) [ 0.810000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.810000]
[PYBOOT] [capri 00:39]: got exception: panic ~$off
[PYBOOT] [capri 00:40]: Done. Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
udevd[239]: error changing net interface name rename4 to eth0: File exists
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 94.109486] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 94.123157] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 97.058764] random: dd urandom read with 63 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 97.871862] eth0: device MAC address be:7f:42:42:d6:b2 [ 97.888205] RX IPC Checksum Offload disabled [ 97.892583] No MAC Management Counters available Listening on LPF/eth0/be:7f:42:42:d6:b2 Sending on LPF/eth0/be:7f:42:42:d6:b2 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 [ 147.276304] random: nonblocking pool is initialized DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
[PYBOOT] [colombus 03:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:09]: got exception: timeout ~$off
[PYBOOT] [colombus 03:10]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 1.694802] NET: Registered protocol family 29 [ 1.700782] mmc0: new high speed SDHC card at address 1234 [ 1.708586] can: raw protocol (rev 20120528) [ 1.713041] can: broadcast manager protocol (rev 20120528 t) [ 1.721403] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 1.728778] can: netlink gateway (rev 20130117) max_hops=1 [ 1.736059] Key type dns_resolver registered [ 1.743556] Registering SWP/SWPB emulation handler [ 1.749097] mmcblk0: p1 p2 p3 [ 1.773845] snvs_rtc 400a7000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 1.901671] ALSA device list: [ 1.904693] No soundcards found. [ 1.919920] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.966617] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.975195] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.001846] devtmpfs: mounted [ 2.007254] Freeing unused kernel memory: 452K (c0a85000 - c0af6000)
[PYBOOT] [cosmic 00:40]: kernel: finished booting, starting userspace. [ 2.293709] request_module: runaway loop modprobe binfmt-0000 INIT: version 2.88 booting INIT: cannot execute "/etc/init.d/rcS" INIT: Entering runlevel: 2 INIT: cannot execute "/etc/init.d/rc"
Debian GNU/Linux 7.0 (none) ttyLP1
(none) login: root root
Login incorrect (none) login: [PYBOOT] [cosmic 01:42]: Timed out waiting for "<type 'str'>":
Login timed out after 60 seconds.
[PYBOOT] [cosmic 01:43]: got exception: timeout ~$off
[PYBOOT] [cosmic 01:44]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.452503] can: raw protocol (rev 20120528) [ 1.456841] can: broadcast manager protocol (rev 20120528 t) [ 1.462581] can: netlink gateway (rev 20130117) max_hops=1 [ 1.469208] Key type dns_resolver registered [ 1.473895] ThumbEE CPU extension supported. [ 1.478267] Registering SWP/SWPB emulation handler [ 1.491531] hctosys: unable to open rtc device (rtc0) [ 1.513305] Waiting for root device /dev/mmcblk0p3... [ 1.546281] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.557646] mmc0: new high speed SDHC card at address 1234 [ 1.564349] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 1.571457] mmcblk0: p1 p2 p3 [ 1.626225] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.636235] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 1.664562] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.672800] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.692777] devtmpfs: mounted [ 1.699285] Freeing unused kernel memory: 1072K (c0e2c000 - c0f38000)
[PYBOOT] [cosmic 00:41]: kernel: finished booting, starting userspace. [ 1.895821] request_module: runaway loop modprobe binfmt-0000 INIT: version 2.88 booting INIT: cannot execute "/etc/init.d/rcS" INIT: Entering runlevel: 2 INIT: cannot execute "/etc/init.d/rc"
Debian GNU/Linux 7.0 (none) ttyLP1
(none) login: root root
Login incorrect (none) login: [PYBOOT] [cosmic 01:43]: Timed out waiting for "<type 'str'>":
Login timed out af [PYBOOT] [cosmic 01:44]: got exception: timeout ~$off
[PYBOOT] [cosmic 01:45]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ERR] [ 2.500610] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ERR] [ 2.506561] nmk-i2c 80128000.i2c: no ack received after address transmission [ERR] [ 2.513854] iio iio:device0: failed to read Who-Am-I register. [ERR] [ 2.552001] iio iio:device1: lsm303dlh_magn: WhoAmI mismatch (0x3c). [ERR] [ 2.804229] EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to feature incompatibilities root@snowball:~# dmesg -l warn | awk '{ print "[WARN] " $0 }' dmesg -l warn | awk '{ print "[WARN] " $0 }' [WARN] [ 0.000000] BUG: mapping for 0x9001d000 at 0xf0000000 out of vmalloc space [WARN] [ 0.158233] "Battery level lower than power on reset threshold" [WARN] [ 0.158264] "Vbus Detect (USB)" [WARN] [ 0.173004] irq: no irq domain found for /soc/gpio@8000e100 ! [WARN] [ 0.941589] V-CSI/DSI: Failed to create debugfs directory [WARN] [ 1.499237] db8500-thermal: probe of 801573c0.thermal failed with error -16 [WARN] [ 1.525299] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 998400 KHz [WARN] [ 1.532928] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1000000 KHz [WARN] [ 2.520080] st-accel-i2c: probe of 2-0018 failed with error -110 [WARN] [ 2.558685] st-magn-i2c: probe of 2-001e failed with error -22 [WARN] [ 2.631500] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [WARN] [ 2.652160] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [WARN] [ 2.920715] EXT4-fs (mmcblk0p4): warning: mounting fs with errors, running e2fsck is recommended [WARN] [ 7.868408] JBD2: Spotted dirty metadata buffer (dev = mmcblk0p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [WARN] [ 8.148254] JBD2: Spotted dirty metadata buffer (dev = mmcblk0p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [WARN] [ 24.718139] EXT4-fs error: 15 callbacks suppressed roo @snowball:~# [ 37.920806] EXT4-fs (mmcblk0p4): Delayed block allocation failed for inode 1304 at logical offset 0 with max blocks 1 with error 28 [ 37.932830] EXT4-fs (mmcblk0p4): This should not happen!! Data will be lost [ 37.932830] [ 37.941406] EXT4-fs (mmcblk0p4): Total free blocks count 0 [ 37.949188] EXT4-fs (mmcblk0p4): Free/Dirty block details [ 37.954681] EXT4-fs (mmcblk0p4): free_blocks=158 [ 37.960418] EXT4-fs (mmcblk0p4): dirty_blocks=3 [ 37.964965] EXT4-fs (mmcblk0p4): Block reservation details [ 37.970458] EXT4-fs (mmcblk0p4): i_reserved_data_blocks=1 [ 38.346588] EXT4-fs (mmcblk0p4): Delayed block allocation failed for inode 11896 at logical offset 2382 with max blocks 1 with error 28 [ 38.358825] EXT4-fs (mmcblk0p4): This should not happen!! Data will be lost [ 38.358825]
[PYBOOT] [snowball 02:04]: got exception: ERROR: Timeout waiting for command: dmesg -l warn | awk '{ print "[WARN] " $0 }'. ~$off
[PYBOOT] [snowball 02:05]: Done.
kernel-build-reports@lists.linaro.org