Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7/
Failed boards:
beaver arm-multi_v7_defconfig : FAILED 1:57.55 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:44.87 colombus arm-multi_v7_defconfig : FAILED 0:00.56 colombus arm-multi_v7_nosmp_defconfig : FAILED 0:56.78 cubox arm-multi_v7_defconfig : FAILED 0:00.45 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 0:00.73 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.07 omap5uevm arm-multi_lpae_defconfig : FAILED 2:22.95 pi arm-multi_v7_defconfig : FAILED 1:49.85 pi arm-multi_lpae_defconfig : FAILED 2:07.10 rk3288evb arm-multi_v7_defconfig : FAILED 0:01.98 rk3288evb arm-multi_v7_nosmp_defconfig : FAILED 0:00.48 snow arm-multi_v7_nosmp_defconfig : FAILED 1:51.39 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.84
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:14.04 bbb arm-omap2plus_defconfig : passed 1:46.23 bbb arm-multi_v7_defconfig : passed 1:24.39 bbb arm-multi_v7_nosmp_defconfig : passed 1:29.03 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:48.49 beagleboard-x15 arm-multi_v7_defconfig : warnings 1:03.00 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:51.00 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:01.06 capri arm-bcm_defconfig : passed 1:02.34 capri arm-multi_v7_defconfig : passed 0:56.05 capri arm-multi_v7_nosmp_defconfig : warnings 0:49.12 chitra powerpc-pasemi_defconfig : passed 3:03.88 chitra powerpc-ppc64_defconfig : passed 1:58.96 colombus arm-sunxi_defconfig : passed 2:36.36 colombus arm-multi_lpae_defconfig : passed 2:41.13 cosmic arm-multi_v7_defconfig : passed 2:53.48 cosmic arm-multi_v7_nosmp_defconfig : passed 3:45.21 cubie arm-sunxi_defconfig : passed 0:48.90 cubie arm-multi_v7_defconfig : passed 0:47.10 cubie arm-multi_v7_nosmp_defconfig : passed 1:02.58 cubie2 arm-sunxi_defconfig : passed 0:54.60 cubie2 arm-multi_v7_defconfig : passed 0:51.25 cubie2 arm-multi_lpae_defconfig : passed 1:02.08 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:13.94 cubox arm-mvebu_v7_defconfig : passed 1:01.46 cubox arm-multi_v7_nosmp_defconfig : passed 1:21.97 dalmore arm-tegra_defconfig : passed 1:27.03 dalmore arm-multi_v7_defconfig : passed 1:23.86 dalmore arm-multi_lpae_defconfig : passed 1:45.59 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:28.79 jetsontk1 arm-tegra_defconfig : passed 0:49.71 jetsontk1 arm-multi_v7_defconfig : passed 0:51.10 jetsontk1 arm-multi_lpae_defconfig : passed 1:02.41 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:54.86 omap5uevm arm-omap2plus_defconfig : passed 1:06.25 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:12.15 pandaes arm-omap2plus_defconfig : warnings 1:54.04 pandaes arm-multi_v7_defconfig : passed 1:48.62 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:02.96 parallella arm-multi_v7_nosmp_defconfig : warnings 3:10.71 pi arm-exynos_defconfig : passed 2:14.56 pit arm-multi_v7_defconfig : passed 2:12.89 pit arm-multi_v7_nosmp_defconfig : warnings 2:28.12 seattle arm64-defconfig : passed 3:22.24 snow arm-exynos_defconfig : passed 2:12.51 snowball arm-multi_v7_defconfig : passed 1:57.45 snowball arm-multi_v7_nosmp_defconfig : warnings 1:41.55 trimslice arm-tegra_defconfig : passed 1:34.16 trimslice arm-multi_v7_defconfig : passed 1:51.25 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:45.77 wandboard arm-multi_v7_defconfig : passed 1:30.81 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:10.00
Offline boards:
arndale arm-exynos_defconfig : OFFLINE 0:53.75 arndale arm-multi_v7_defconfig : OFFLINE 0:59.36 arndale arm-multi_lpae_defconfig : OFFLINE 1:03.60 arndale arm-multi_v7_nosmp_defconfig : OFFLINE 1:02.89 beaver arm-tegra_defconfig : OFFLINE 2:12.17 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:14.27 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.68 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:27.93 cosmic arm-imx_v6_v7_defconfig : OFFLINE 0:23.88 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:48.32 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.43 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.10 parallella arm-multi_v7_defconfig : OFFLINE 0:47.58 pi arm-multi_v7_nosmp_defconfig : OFFLINE 0:25.16 pit arm-exynos_defconfig : OFFLINE 0:25.56 pit arm-multi_lpae_defconfig : OFFLINE 0:28.44 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:42.85 sama5 arm-sama5_defconfig : OFFLINE 2:15.70 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.34 seaboard arm-tegra_defconfig : OFFLINE 2:23.63 seaboard arm-multi_v7_defconfig : OFFLINE 2:37.30 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.30 snow arm-multi_v7_defconfig : OFFLINE 0:34.16 snow arm-multi_lpae_defconfig : OFFLINE 0:35.60 snowball arm-u8500_defconfig : OFFLINE 1:54.67 socfpga arm-socfpga_defconfig : OFFLINE 2:35.48 socfpga arm-multi_v7_defconfig : OFFLINE 2:28.62 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.11
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.228130] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.235085] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.241605] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.248543] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.254126] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.261133] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.271134] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.282873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.289490] [drm] No driver support for vblank timestamp query. [ 3.295429] drm drm: No connectors reported connected with modes [ 3.301434] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.326486] Console: switching to colour frame buffer device 128x48 [ 3.338629] drm drm: fb0: frame buffer device [ 3.353399] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.364167] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.370632] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.376041] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.383876] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.398411] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.405171] hub 1-0:1.0: USB hub found [ 3.408943] hub 1-0:1.0: 1 port detected [ 3.413865] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.419276] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.427008] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.438404] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.445086] hub 2-0:1.0: USB hub found [ 3.448856] hub 2-0:1.0: 1 port detected [ 3.457691] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.471325] vdd_sata,avdd_plle: disabling [ 3.476042] usb1_vbus: disabling [ 3.480125] Waiting for root device /dev/mmcblk0p1... [ 3.758409] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.696985] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:55]: got exception: timeout ~$off
[PYBOOT] [beaver 01:57]: Done.
========================================================================
Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.202743] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.209696] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.216211] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.223137] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.228717] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.235318] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.245310] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.255863] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.262478] [drm] No driver support for vblank timestamp query. [ 3.268412] drm drm: No connectors reported connected with modes [ 3.274413] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.293757] Console: switching to colour frame buffer device 128x48 [ 3.305524] drm drm: fb0: frame buffer device [ 3.309960] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.320255] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.326713] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.332119] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.339833] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.353119] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.359441] hub 1-0:1.0: USB hub found [ 3.363204] hub 1-0:1.0: 1 port detected [ 3.367928] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.373344] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.380998] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.393117] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.399377] hub 2-0:1.0: USB hub found [ 3.403136] hub 2-0:1.0: 1 port detected [ 3.410604] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.423526] vdd_sata,avdd_plle: disabling [ 3.427913] usb1_vbus: disabling [ 3.431879] Waiting for root device /dev/mmcblk0p1... [ 3.713122] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.651682] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:43]: got exception: timeout ~$off
[PYBOOT] [beaver 01:44]: Done.
========================================================================
Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
fifo_size = 0x200 Fastboot entered boot tIRQ: suspend mp/colombus-q2FuKZ/zImage7jaUXIIRQ: reset IRQ: reset
(user:build) Load fastboot kernel address:124, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddress: 124 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x7c speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 creating boot image... creating boot image - 3786752 bytes downloading 'boot.img'... download FastBot:Starting download of 3 MB Downloading 0 MB ...Downloading 0 MB ...Downloading 1 MB ...Downloading 1 MB ...Downloading 2 MB ...Downloading 2 MB ...Downloading 3 MB ...OKAY [ 1.096s]
downloading of 3 MB finished Downloading 3 MB ...booting... OKAY [ 0.001s] finished. total time: 1.105s boot FASTBOOT DONE Booting raw image.. ## Starting application at 0x41000800 ...
[PYBOOT] [colombus 00:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 00:55]: got exception: timeout ~$off
[PYBOOT] [colombus 00:56]: Done.
========================================================================
Board cubox-arm-multi_v7_defconfig failure log: -------------------------------------------------
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.927617] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.938951] mmc0: new high speed MMC card at address 0001 [ 1.945078] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.950017] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.956384] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.965435] SMPS6: supplied by vsys_cobra [ 1.969953] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.977564] SMPS7: supplied by vsys_cobra [ 1.982507] vdds_1v8_main: supplied by smps7 [ 1.987854] SMPS8: supplied by vsys_cobra [ 1.993556] SMPS9: supplied by vsys_cobra [ 1.998063] smps9: Bringing 0uV into 2100000-2100000uV [ 2.006038] LDO1: supplied by vsys_cobra [ 2.010474] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.016842] LDO2: supplied by vsys_cobra [ 2.021273] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.023351] smsc95xx v1.0.4 [ 2.030569] LDO3: supplied by vdds_1v8_main [ 2.036568] LDO4: supplied by vdds_1v8_main [ 2.041269] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.047655] LDO5: supplied by vsys_cobra [ 2.053386] LDO6: supplied by vdds_1v8_main [ 2.060921] LDO7: supplied by vsys_cobra [ 2.065332] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.071739] LDO8: supplied by vsys_cobra [ 2.073741] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 12:0e:6d:be:9c:63 [ 2.089160] LDO9: supplied by vmmcsd_fixed [ 2.095239] LDOLN: supplied by vsys_cobra [ 2.101061] LDOUSB: supplied by vsys_cobra [ 2.109933] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.135012] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.142706] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.150603] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.160931] Unable to handle kernel NULL pointer dereference at virtual add[ 2.167938] Una [PYBOOT] [omap5uevm 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:21]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:22]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.912039] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.922884] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.934121] mmc0: new high speed MMC card at address 0001 [ 1.940209] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.945152] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951541] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.960672] SMPS6: supplied by vsys_cobra [ 1.965180] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.972741] SMPS7: supplied by vsys_cobra [ 1.977707] vdds_1v8_main: supplied by smps7 [ 1.983127] SMPS8: supplied by vsys_cobra [ 1.988898] SMPS9: supplied by vsys_cobra [ 1.993438] smps9: Bringing 0uV into 2100000-2100000uV [ 1.999517] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 4e:1f:29:e7:bd:8f [ 2.013652] LDO1: supplied by vsys_cobra [ 2.018100] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.024545] LDO2: supplied by vsys_cobra [ 2.028962] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.035374] LDO3: supplied by vdds_1v8_main [ 2.041401] LDO4: supplied by vdds_1v8_main [ 2.046131] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.052545] LDO5: supplied by vsys_cobra [ 2.058310] LDO6: supplied by vdds_1v8_main [ 2.065858] LDO7: supplied by vsys_cobra [ 2.070273] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.076676] LDO8: supplied by vsys_cobra [ 2.082424] LDO9: supplied by vmmcsd_fixed [ 2.088520] LDOLN: supplied by vsys_cobra [ 2.094381] LDOUSB: supplied by vsys_cobra [ 2.103300] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.130219] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.137922] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.145830] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533714] isl29018 7-0044: No cache defaults, reading back from HW [ 1.540071] isl29018 7-0044: Failed to read 1: -6 [ 1.544654] isl29018 7-0044: regmap initialization fails: -6 [ 1.555571] NET: Registered protocol family 10 [ 1.560005] sit: IPv6 over IPv4 tunneling driver [ 1.563582] NET: Registered protocol family 17 [ 1.567587] can: controller area network core (rev 20120528 abi 9) [ 1.573779] NET: Registered protocol family 29 [ 1.578165] can: raw protocol (rev 20120528) [ 1.582415] can: broadcast manager protocol (rev 20120528 t) [ 1.588057] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593784] Key type dns_resolver registered [ 1.598101] ThumbEE CPU extension supported. [ 1.602026] Registering SWP/SWPB emulation handler [ 1.611891] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617369] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623735] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629110] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.639212] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649569] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.655012] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.665197] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671377] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676756] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686498] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708747] Waiting for root device /dev/mmcblk0p1... [ 1.712627] mmc0: tuning execution failed: -5 [ 1.716683] mmc0: error -5 whilst initialising MMC card [ 2.578469] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.592624] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.598084] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.604458] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.609842] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:05]: got exception: timeout ~$off
[PYBOOT] [pi 02:06]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533781] isl29018 7-0044: No cache defaults, reading back from HW [ 1.540133] isl29018 7-0044: Failed to read 1: -6 [ 1.544719] isl29018 7-0044: regmap initialization fails: -6 [ 1.555622] NET: Registered protocol family 10 [ 1.560056] sit: IPv6 over IPv4 tunneling driver [ 1.563630] NET: Registered protocol family 17 [ 1.567635] can: controller area network core (rev 20120528 abi 9) [ 1.573826] NET: Registered protocol family 29 [ 1.578213] can: raw protocol (rev 20120528) [ 1.582463] can: broadcast manager protocol (rev 20120528 t) [ 1.588105] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593828] Key type dns_resolver registered [ 1.598148] ThumbEE CPU extension supported. [ 1.602075] Registering SWP/SWPB emulation handler [ 1.611964] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617443] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623810] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629184] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.639293] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649659] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.655103] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.665287] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671469] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676847] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686584] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708855] Waiting for root device /dev/mmcblk0p1... [ 1.712732] mmc0: tuning execution failed: -5 [ 1.716792] mmc0: error -5 whilst initialising MMC card [ 2.578573] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.592725] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.598185] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.604557] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.609940] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:48]: got exception: timeout ~$off
[PYBOOT] [pi 01:49]: Done.
========================================================================
Board rk3288evb-arm-multi_v7_defconfig failure log: -------------------------------------------------
========================================================================
Board rk3288evb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
========================================================================
Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
root@snow:~# cat /proc/cmdline cat /proc/cmdline console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait root@snow:~# uname -r uname -r 4.7.0 root@snow:~# cat /proc/cpuinfo [ 7.697624] Unable to handle kernel paging request at virtual address c12c34a8 [ 7.703380] pgd = c0204000 [ 7.706069] [c12c34a8] *pgd=4120041e(bad) [ 7.710069] Internal error: Oops: 8000000d [#1] ARM [ 7.714922] Modules linked in: [ 7.717970] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.7.0 #1 [ 7.724817] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 7.730897] task: c1206038 ti: c1200000 task.ti: c1200000 [ 7.736279] PC is at 0xc12c34a8 [ 7.739415] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 7.744008] pc : [<c12c34a8>] lr : [<c0a19a84>] psr: 600001d3 [ 7.744008] sp : c1201f88 ip : 00000000 fp : 000000a0 [ 7.755458] r10: 00000000 r9 : 00000001 r8 : c12c3ff0 [ 7.760668] r7 : c12c3fb0 r6 : c12c34b0 r5 : 00000001 r4 : c120212c [ 7.767177] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 [ 7.773690] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 7.780980] Control: 10c53c7d Table: 6d4f8059 DAC: 00000051 [ 7.786708] Process swapper (pid: 0, stack limit = 0xc1200218) [ 7.792523] Stack: (0xc1201f88 to 0xc1202000) [ 7.796874] 1f80: c130ee1e c1202134 c12c34b0 c12c3f50 c1201fac c0b26cc8 [ 7.805034] 1fa0: c1200000 c120212c c1201fb4 c0b26ed0 00000000 c035adbc ffffffff c1100c40 [ 7.813192] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c1192a28 c13111d4 c12020b4 [ 7.821351] 1fe0: c1192a24 c12071fc 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 7.829528] [<c0a19a84>] (cpu_pm_pmu_notify) from [<c0b26cc8>] (schedule+0x44/0x9c) [ 7.837153] Code: c12c3494 c12c35e0 c12c35e0 00000000 (c12c34b0) [ 7.843222] ---[ end trace cb88537fdc8fa202 ]--- [ 7.847816] Kernel panic - not syncing: Attempted to kill the idle task! [ 7.854502] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 01:49]: got exception: ERROR: Timeout waiting for command: cat /proc/cpuinfo. ~$off
[PYBOOT] [snow 01:50]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: cannot execute "/sbin/g[ 19.908497] mmcblk0: error -110 sending status command, aborting etty"
[ 19.922430] mmcblk0: error -110 sending status command, retrying [ 19.930918] mmcblk0: error -110 sending status command, retrying [ 19.939381] mmcblk0: error -110 sending status command, aborting [ 19.950463] mmcblk0: error -110 sending status command, retrying [ 19.958927] mmcblk0: error -110 sending status command, retrying [ 19.967385] mmcblk0: error -110 sending status command, aborting [ 19.978380] mmcblk0: error -110 sending status command, retrying [ 19.986849] mmcblk0: error -110 sending status command, retrying [ 19.995269] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: INIT: cannot execute "/sbin/getty"Id "2" respawning too fast: disabled for 5 minutes [ 20.041730] mmcblk0: error -110 sending status command, retrying [ 20.050203] mmcblk0: error -110 sending status command, retrying [ 20.058666] mmcblk0: error -110 sending status command, aborting [ 20.069729] mmcblk0: error -110 sending status command, retrying [ 20.078274] mmcblk0: error -110 sending status command, retrying [ 20.086710] mmcblk0: error -110 sending status command, aborting [ 20.097746] mmcblk0: error -110 sending status command, retrying [ 20.106197] mmcblk0: error -110 sending status command, retrying [ 20.114646] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty"INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 48.784816] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter