Failed boards:
bbb multi_v7_defconfig : FAILED 1:22.83 panda multi_v7_defconfig : FAILED 1:34.66
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:15.37 arndale exynos_defconfig : passed 1:11.46 bbb omap2plus_defconfig : passed 1:37.96 beaver tegra_defconfig : passed 0:55.71 beaver multi_v7_defconfig : passed 0:53.57 capri bcm_defconfig : passed 0:42.89 capri multi_v7_defconfig : passed 0:44.33 cubie sunxi_defconfig : passed 0:54.72 cubie multi_v7_defconfig : passed 0:58.54 cubie2 sunxi_defconfig : passed 0:50.71 cubie2 multi_v7_defconfig : passed 1:02.19 cubie2 multi_lpae_defconfig : passed 0:52.38 cubox dove_defconfig : warnings 1:14.87 dalmore tegra_defconfig : passed 1:23.23 dalmore multi_v7_defconfig : passed 1:16.97 dalmore multi_lpae_defconfig : passed 1:15.99 panda omap2plus_defconfig : passed 1:18.75 sama5 sama5_defconfig : passed 1:50.52 seaboard tegra_defconfig : passed 1:01.89 seaboard multi_v7_defconfig : passed 2:23.73 snow exynos_defconfig : passed 1:19.31 snowball u8500_defconfig : passed 2:19.19 snowball multi_v7_defconfig : passed 2:07.38 trimslice tegra_defconfig : passed 0:59.70 trimslice multi_v7_defconfig : passed 0:58.72 wandboard imx_v6_v7_defconfig : passed 0:57.78 wandboard multi_v7_defconfig : passed 1:07.32
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'arm-soc/v3.13-rc4-691-g84af056/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4349360 (425db0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc4-691-g84af056/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc4-691-g84af056/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'arm-soc/v3.13-rc4-691-g84af056/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 671.9 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot#bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.415313] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422668] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.430084] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441986] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449645] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456451] usbcore: registered new interface driver usbhid [ 1.462310] usbhid: USB HID core driver [ 1.469268] TCP: cubic registered [ 1.472747] NET: Registered protocol family 17 [ 1.477600] Key type dns_resolver registered [ 1.482482] Power Management for TI OMAP4+ devices. [ 1.487640] Power Management for TI OMAP4. [ 1.491943] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.499084] Registering SWP/SWPB emulation handler [ 1.504913] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517730] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526245] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537872] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537872] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556915] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.556915] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575927] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583404] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.588562] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602691] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.609588] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617950] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.622772] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.631164] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638458] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646179] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.658081] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665649] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674560] spear_cpufreq: Invalid cpufreq_tbl [ 1.679199] ALSA device list: [ 1.679199] No soundcards found. [ 1.686248] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692413] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org