Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.19-rc5-134-gf8de05c/

Failed boards:

capri arm-multi_v7_defconfig : FAILED 0:30.57 rk3288evb arm-multi_v7_defconfig : FAILED 1:57.01 rk3288evb arm-multi_lpae_defconfig : FAILED 1:47.33 socfpga arm-socfpga_defconfig : FAILED 2:03.19

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:22.93 arndale arm-exynos_defconfig : passed 1:27.82 arndale arm-multi_v7_defconfig : passed 1:22.55 arndale arm-multi_lpae_defconfig : passed 1:38.35 bbb arm-omap2plus_defconfig : passed 1:28.62 bbb arm-multi_v7_defconfig : passed 1:17.07 beaver arm-tegra_defconfig : passed 0:54.88 beaver arm-multi_v7_defconfig : passed 0:52.43 capri arm-bcm_defconfig : passed 0:42.05 chitra powerpc-pasemi_defconfig : passed 1:05.69 chitra powerpc-ppc64_defconfig : warnings 1:59.18 colombus arm-sunxi_defconfig : passed 1:04.79 colombus arm-multi_v7_defconfig : passed 1:22.19 colombus arm-multi_lpae_defconfig : passed 1:09.22 cosmic arm-imx_v6_v7_defconfig : passed 1:53.47 cosmic arm-multi_v7_defconfig : passed 1:40.27 cubie arm-sunxi_defconfig : passed 0:59.77 cubie arm-multi_v7_defconfig : passed 1:08.54 cubie2 arm-sunxi_defconfig : passed 0:58.38 cubie2 arm-multi_v7_defconfig : passed 1:09.95 cubie2 arm-multi_lpae_defconfig : passed 1:11.80 cubox arm-multi_v7_defconfig : passed 1:24.77 cubox arm-mvebu_v7_defconfig : passed 1:32.89 dalmore arm-tegra_defconfig : passed 1:25.58 dalmore arm-multi_v7_defconfig : passed 1:21.07 dalmore arm-multi_lpae_defconfig : passed 1:25.90 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.58 hummingboard arm-multi_v7_defconfig : passed 1:11.73 jetsontk1 arm-tegra_defconfig : passed 1:01.29 jetsontk1 arm-multi_v7_defconfig : passed 0:59.30 jetsontk1 arm-multi_lpae_defconfig : passed 1:19.69 minnowmax x86-minnowmax_defconfig : passed 1:37.63 odroidu3 arm-exynos_defconfig : passed 0:54.04 omap5uevm arm-omap2plus_defconfig : passed 1:08.32 omap5uevm arm-multi_v7_defconfig : passed 1:25.28 omap5uevm arm-multi_lpae_defconfig : passed 1:36.51 pandaes arm-omap2plus_defconfig : passed 1:27.99 pandaes arm-multi_v7_defconfig : passed 1:32.65 parallella arm-multi_v7_defconfig : passed 1:58.57 pi arm-exynos_defconfig : passed 1:00.58 pi arm-multi_v7_defconfig : passed 0:48.85 pi arm-multi_lpae_defconfig : passed 1:03.32 pit arm-exynos_defconfig : passed 1:07.87 pit arm-multi_v7_defconfig : passed 0:50.29 pit arm-multi_lpae_defconfig : passed 0:58.73 sama5 arm-sama5_defconfig : passed 2:01.92 seaboard arm-tegra_defconfig : passed 2:00.10 seaboard arm-multi_v7_defconfig : passed 1:02.41 snow arm-exynos_defconfig : passed 1:14.89 snow arm-multi_v7_defconfig : passed 1:08.06 snow arm-multi_lpae_defconfig : passed 1:12.21 snowball arm-u8500_defconfig : passed 2:21.84 snowball arm-multi_v7_defconfig : passed 2:17.42 socfpga arm-multi_v7_defconfig : passed 1:15.38 trimslice arm-tegra_defconfig : passed 0:53.34 trimslice arm-multi_v7_defconfig : passed 0:57.75 wandboard arm-imx_v6_v7_defconfig : passed 1:11.21 wandboard arm-multi_v7_defconfig : passed 1:05.98

Offline boards:

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.760000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0 [ 0.760000] [<c05c9da0>] (dev_uevent) from [<c046f2dc>] (kobject_uevent_env+0x1d4/0x4ec) [ 0.760000] [<c046f2dc>] (kobject_uevent_env) from [<c05c9840>] (device_add+0x390/0x520) [ 0.760000] [<c05c9840>] (device_add) from [<c05c9b5c>] (device_create_groups_vargs+0xac/0xbc) [ 0.760000] [<c05c9b5c>] (device_create_groups_vargs) from [<c05c9b8c>] (device_create_vargs+0x20/0x28) [ 0.760000] [<c05c9b8c>] (device_create_vargs) from [<c02d4478>] (bdi_register+0x58/0xf0) [ 0.760000] [<c02d4478>] (bdi_register) from [<c02d4534>] (bdi_register_dev+0x24/0x2c) [ 0.760000] [<c02d4534>] (bdi_register_dev) from [<c045e288>] (add_disk+0x130/0x440) [ 0.760000] [<c045e288>] (add_disk) from [<c05e62e0>] (loop_add+0x16c/0x1d8) [ 0.760000] [<c05e62e0>] (loop_add) from [<c0cbae90>] (loop_init+0xf0/0x12c) [ 0.760000] [<c0cbae90>] (loop_init) from [<c0208cd0>] (do_one_initcall+0x8c/0x1d4) [ 0.760000] [<c0208cd0>] (do_one_initcall) from [<c0c78db8>] (kernel_init_freeable+0x148/0x1e8) [ 0.760000] [<c0c78db8>] (kernel_init_freeable) from [<c092d41c>] (kernel_init+0x8/0xe8) [ 0.760000] [<c092d41c>] (kernel_init) from [<c020e8b8>] (ret_from_fork+0x14/0x3c) [ 0.760000] Code: bad PC value [ 0.765000] ---[ end trace f68b85c65387cd30 ]--- [ 0.765000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.765000] [ 0.765000] CPU1: stopping [ 0.765000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.19.0-rc5-00134-gf8de05c #1 [ 0.765000] Hardware name: BCM281xx Broadcom Application Processor [ 0.765000] [<c021627c>] (unwind_backtrace) from [<c0211c90>] (show_stack+0x10/0x14) [ 0.765000] [<c0211c90>] (show_stack) from [<c09305b0>] (dump_stack+0x8c/0x9c) [ 0.765000] [<c09305b0>] (dump_stack) from [<c0214a74>] (handle_IPI+0x150/0x170) [ 0.765000] [<c0214a74>] (handle_IPI) from [<c020899c>] (gic_handle_irq+0x64/0x68) [ 0.765000] [<c020899c>] (gic_handle_irq) from [<c0212800>] (__irq_svc+0x40/0x54) [ 0.765000] Exception stack(0xea883f80 to 0xea883fc8) [ 0.765000] 3f80: ffffffed 00000000 ffffffed c021f800 c0d4249c c0d42500 00000000 00000000 [ 0.765000] 3fa0: ea882000 ea883fd0 c093e658 00000000 c0d43c7c ea883fc8 c020f380 c020f384 [ 0.765000] 3fc0: 60000153 ffffffff [ 0.765000] [<c0212800>] (__irq_svc) from [<c020f384>] (arch_cpu_idle+0x38/0x3c) [ 0.765000] [<c020f384>] (arch_cpu_idle) from [<c0275fa0>] (cpu_startup_entry+0x194/0x268) [ 0.765000] [<c0275fa0>] (cpu_startup_entry) from [<90208ac4>] (0x90208ac4) [ 0.765000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.765000]

[PYBOOT] [capri 00:28]: got exception: panic ~$off

[PYBOOT] [capri 00:30]: Done.

========================================================================

Board rk3288evb-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.213788] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode. [ 1.221660] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller. [ 1.228485] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a [ 1.234262] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 25, 32 bit host data width, 256 deep fifo [ 1.244189] dwmmc_rockchip ff0f0000.dwmmc: No vmmc regulator found [ 1.250366] dwmmc_rockchip ff0f0000.dwmmc: No vqmmc regulator found [ 1.266542] mmc0: card lacks mandatory switch function, performance might suffer [ 1.273956] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) [ 1.276049] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.292944] mmc0: new SD card at address b368 [ 1.296059] dwmmc_rockchip ff0f0000.dwmmc: 1 slots initialized [ 1.296354] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.297169] ledtrig-cpu: registered to indicate activity on CPUs [ 1.297351] usbcore: registered new interface driver usbhid [ 1.297353] usbhid: USB HID core driver [ 1.299119] usbcore: registered new interface driver snd-usb-audio [ 1.300952] TCP: cubic registered [ 1.300964] NET: Registered protocol family 17 [ 1.300984] can: controller area network core (rev 20120528 abi 9) [ 1.301054] NET: Registered protocol family 29 [ 1.301067] can: raw protocol (rev 20120528) [ 1.301077] can: broadcast manager protocol (rev 20120528 t) [ 1.301096] can: netlink gateway (rev 20130117) max_hops=1 [ 1.301391] Key type dns_resolver registered [ 1.301504] ThumbEE CPU extension supported. [ 1.301519] Registering SWP/SWPB emulation handler [ 1.303032] backlight supply power not found, using dummy regulator [ 1.303078] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.303083] pwm-backlight backlight: unable to request legacy PWM [ 1.303134] platform backlight: Driver pwm-backlight requests probe deferral [ 1.304215] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.304438] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.306470] backlight supply power not found, using dummy regulator [ 1.306517 [PYBOOT] [rk3288evb 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [rk3288evb 01:45]: got exception: timeout ~$off

[PYBOOT] [rk3288evb 01:46]: Done.

========================================================================

Board rk3288evb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.328543] TCP: cubic registered [ 1.331869] NET: Registered protocol family 17 [ 1.336323] can: controller area network core (rev 20120528 abi 9) [ 1.342534] NET: Registered protocol family 29 [ 1.346044] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.353930] can: raw protocol (rev 20120528) [ 1.358204] can: broadcast manager protocol (rev 20120528 t) [ 1.363864] can: netlink gateway (rev 20130117) max_hops=1 [ 1.369566] Key type dns_resolver registered [ 1.373924] ThumbEE CPU extension supported. [ 1.378200] Registering SWP/SWPB emulation handler [ 1.384179] backlight supply power not found, using dummy regulator [ 1.390498] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.397640] pwm-backlight backlight: unable to request legacy PWM [ 1.403775] platform backlight: Driver pwm-backlight requests probe deferral [ 1.411675] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.412644] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.412677] mmc0: new high speed SDHC card at address b368 [ 1.412870] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.414315] mmcblk0: p1 p2 p3 [ 1.415042] backlight supply power not found, using dummy regulator [ 1.415078] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.415082] pwm-backlight backlight: unable to request legacy PWM [ 1.415116] platform backlight: Driver pwm-backlight requests probe deferral [ 1.453634] mmc1: BKOPS_EN bit is not set [ 1.454900] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.455015] mmc1: new high speed MMC card at address 0001 [ 1.455229] mmcblk1: mmc1:0001 M8G1GC 7.28 GiB [ 1.455283] mmcblk1boot0: mmc1:0001 M8G1GC partition 1 4.00 MiB [ 1.455338] mmcblk1boot1: mmc1:0001 M8G1GC partition 2 4.00 MiB [ 1.458967] mmcblk1: p1 [ 1.460031] backlight supply power not found, using dummy regulator [ 1.460062] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.460065] pwm-backlight [PYBOOT] [rk3288evb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [rk3288evb 01:52]: got exception: timeout ~$off

[PYBOOT] [rk3288evb 01:53]: Done.

========================================================================

Board socfpga-arm-socfpga_defconfig failure log: -------------------------------------------------

[ 1.088706] Switched to clocksource timer1 [ 1.117957] NET: Registered protocol family 2 [ 1.118505] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.118546] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 1.118603] TCP: Hash tables configured (established 4096 bind 4096) [ 1.118662] TCP: reno registered [ 1.118673] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.118726] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.118911] NET: Registered protocol family 1 [ 1.119783] RPC: Registered named UNIX socket transport module. [ 1.119792] RPC: Registered udp transport module. [ 1.119798] RPC: Registered tcp transport module. [ 1.119803] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.120780] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.131238] ntfs: driver 2.1.31 [Flags: R/W]. [ 1.135068] io scheduler noop registered (default) [ 1.141856] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.142854] console [ttyS0] disabled [ 1.142884] ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 34, base_baud = 6250000) is a 16550A [ 1.632924] console [ttyS0] enabled [ 1.636916] ffc03000.serial1: ttyS1 at MMIO 0xffc03000 (irq = 35, base_baud = 6250000) is a 16550A [ 1.648796] brd: module loaded [ 1.652320] CAN device driver interface [ 1.656489] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 1.661556] Ring mode enabled [ 1.664597] DMA HW capability register supported [ 1.669114] Enhanced/Alternate descriptors [ 1.673459] Enabled extended descriptors [ 1.677449] RX Checksum Offload Engine supported (type 2) [ 1.682918] TX Checksum insertion supported [ 1.687167] Enable RX Mitigation via HW Watchdog Timer [ 1.699484] libphy: stmmac: probed [ 1.702880] eth0: PHY ID 00221611 at 4 IRQ POLL (stmmac-0:04) active

[PYBOOT] [socfpga 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [socfpga 02:01]: got exception: timeout ~$off

[PYBOOT] [socfpga 02:02]: Done.