Failed boards:

bbb multi_v7_defconfig : FAILED 1:19.85 panda multi_v7_defconfig : FAILED 1:37.12

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:14.60 arndale exynos_defconfig : passed 1:06.46 bbb omap2plus_defconfig : passed 1:36.95 beaver tegra_defconfig : passed 0:53.31 beaver multi_v7_defconfig : passed 0:54.96 capri bcm_defconfig : passed 0:45.38 capri multi_v7_defconfig : passed 0:44.55 cubie sunxi_defconfig : passed 0:52.99 cubie multi_v7_defconfig : passed 0:57.22 cubie2 sunxi_defconfig : passed 0:53.05 cubie2 multi_v7_defconfig : passed 0:59.22 cubie2 multi_lpae_defconfig : passed 0:49.65 cubox dove_defconfig : warnings 1:04.63 dalmore tegra_defconfig : passed 1:20.85 dalmore multi_v7_defconfig : passed 1:16.38 dalmore multi_lpae_defconfig : passed 1:16.52 panda omap2plus_defconfig : passed 1:11.90 sama5 sama5_defconfig : passed 1:53.02 seaboard tegra_defconfig : passed 1:05.06 seaboard multi_v7_defconfig : passed 1:11.71 snow exynos_defconfig : passed 1:20.90 snowball u8500_defconfig : passed 1:23.45 snowball multi_v7_defconfig : passed 2:11.94 trimslice tegra_defconfig : passed 1:00.85 trimslice multi_v7_defconfig : passed 0:58.82 wandboard imx_v6_v7_defconfig : passed 0:57.01 wandboard multi_v7_defconfig : passed 0:58.55

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-multi_v7_defconfig failure log: -------------------------------------------------

Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-1050-g12043f0/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350736 (426310 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-1050-g12043f0/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-1050-g12043f0/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-1050-g12043f0/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 349.6 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6

Starting kernel ...

~$off # PYBOOT: Exception: timeout

========================================================================

Board panda-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.415313] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422637] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.430084] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441986] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449645] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456451] usbcore: registered new interface driver usbhid [ 1.462310] usbhid: USB HID core driver [ 1.469268] TCP: cubic registered [ 1.472747] NET: Registered protocol family 17 [ 1.477630] Key type dns_resolver registered [ 1.482513] Power Management for TI OMAP4+ devices. [ 1.487670] Power Management for TI OMAP4. [ 1.491973] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.499114] Registering SWP/SWPB emulation handler [ 1.504974] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517791] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526184] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537963] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537963] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556976] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.556976] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.576019] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583221] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.595062] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602874] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610443] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.618072] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.623962] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.631286] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638610] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646331] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.658233] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665771] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674682] spear_cpufreq: Invalid cpufreq_tbl [ 1.679321] ALSA device list: [ 1.679321] No soundcards found. [ 1.686462] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692535] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout