Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.34-32-gcd586a7/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 1:33.85 bbb arm-omap2plus_defconfig : FAILED 2:03.69 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:48.02 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:50.31 beaver arm-tegra_defconfig : FAILED 1:49.79 beaver arm-multi_v7_nosmp_defconfig : FAILED 3:35.44 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:27.89 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 2:15.33 odroidu3 arm-multi_v7_defconfig : FAILED 3:44.59 seaboard arm-tegra_defconfig : FAILED 3:16.55 seaboard arm-multi_v7_nosmp_defconfig : FAILED 3:01.85 snowball arm-u8500_defconfig : FAILED 2:10.17

Successful boards:

arndale arm-exynos_defconfig : warnings 1:38.56 arndale arm-multi_v7_defconfig : passed 2:08.49 capri arm-multi_v7_nosmp_defconfig : warnings 2:03.90 colombus arm-multi_v7_defconfig : passed 3:40.31 colombus arm-multi_lpae_defconfig : passed 2:49.01 cosmic arm-imx_v6_v7_defconfig : passed 3:22.92 cosmic arm-multi_v7_nosmp_defconfig : passed 4:24.39 cubie arm-sunxi_defconfig : passed 1:00.63 cubie arm-multi_v7_defconfig : passed 1:15.80 cubie arm-multi_v7_nosmp_defconfig : passed 3:12.72 cubie2 arm-sunxi_defconfig : passed 1:02.51 cubie2 arm-multi_v7_defconfig : passed 1:37.20 cubie2 arm-multi_v7_nosmp_defconfig : warnings 2:11.24 cubox arm-multi_v7_defconfig : passed 2:16.96 jetsontk1 arm-tegra_defconfig : passed 1:46.44 jetsontk1 arm-multi_v7_defconfig : passed 1:43.79 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 2:45.83 omap5uevm arm-omap2plus_defconfig : passed 1:09.77 omap5uevm arm-multi_v7_defconfig : passed 1:16.01 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:44.05 pandaes arm-omap2plus_defconfig : warnings 1:44.61 pandaes arm-multi_v7_defconfig : passed 2:06.80 parallella arm-multi_v7_nosmp_defconfig : warnings 4:26.06 pi arm-exynos_defconfig : passed 2:07.45 pi arm-multi_v7_nosmp_defconfig : warnings 3:40.43 pit arm-exynos_defconfig : passed 1:33.39 pit arm-multi_v7_defconfig : passed 1:45.29 seattle arm64-defconfig : passed 4:07.74 seattle arm64-nosmp_defconfig : passed 3:29.99 trimslice arm-tegra_defconfig : passed 1:51.42 trimslice arm-multi_v7_defconfig : passed 2:47.48 trimslice arm-multi_v7_nosmp_defconfig : warnings 3:41.76 wandboard arm-imx_v6_v7_defconfig : passed 1:25.11

Offline boards:

apc arm-vt8500_v6_v7_defconfig : OFFLINE 2:29.48 arndale arm-multi_lpae_defconfig : OFFLINE 2:51.16 bbb arm-multi_v7_defconfig : OFFLINE 2:22.91 bbb arm-multi_v7_nosmp_defconfig : OFFLINE 2:05.75 beagleboard-x15 arm-multi_lpae_defconfig : OFFLINE 2:32.77 beagleboard-x15 arm-multi_v7_nosmp_defconfig : OFFLINE 2:27.04 beaver arm-multi_v7_defconfig : OFFLINE 2:10.26 capri arm-multi_v7_defconfig : OFFLINE 2:27.14 chitra powerpc-pasemi_defconfig : OFFLINE 2:19.43 chitra powerpc-ppc64_defconfig : OFFLINE 2:13.07 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:20.89 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:32.21 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:45.30 colombus arm-sunxi_defconfig : OFFLINE 2:05.84 cosmic arm-multi_v7_defconfig : OFFLINE 2:31.04 cubie2 arm-multi_lpae_defconfig : OFFLINE 2:39.38 cubox arm-mvebu_v7_defconfig : OFFLINE 2:23.73 cubox arm-multi_v7_nosmp_defconfig : OFFLINE 2:30.80 dalmore arm-tegra_defconfig : OFFLINE 3:44.38 dalmore arm-multi_v7_defconfig : OFFLINE 2:15.52 dalmore arm-multi_lpae_defconfig : OFFLINE 4:33.97 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:23.87 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:06.20 hummingboard arm-multi_v7_defconfig : OFFLINE 2:28.17 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 3:45.57 jetsontk1 arm-multi_lpae_defconfig : OFFLINE 2:28.68 minnowmax x86-minnowmax_defconfig : OFFLINE 2:30.68 omap5uevm arm-multi_lpae_defconfig : OFFLINE 3:00.19 pandaes arm-multi_v7_nosmp_defconfig : OFFLINE 2:09.91 parallella arm-multi_v7_defconfig : OFFLINE 2:05.96 pi arm-multi_v7_defconfig : OFFLINE 2:08.80 pi arm-multi_lpae_defconfig : OFFLINE 2:12.86 pit arm-multi_lpae_defconfig : OFFLINE 2:17.37 pit arm-multi_v7_nosmp_defconfig : OFFLINE 2:32.08 rk3288evb arm-multi_v7_defconfig : OFFLINE 2:19.02 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:51.25 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 2:28.58 sama5 arm-sama5_defconfig : OFFLINE 3:38.29 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:06.11 seaboard arm-multi_v7_defconfig : OFFLINE 2:05.57 snow arm-exynos_defconfig : OFFLINE 2:28.34 snow arm-multi_v7_defconfig : OFFLINE 3:19.84 snow arm-multi_lpae_defconfig : OFFLINE 2:54.46 snow arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.60 snowball arm-multi_v7_defconfig : OFFLINE 2:09.55 snowball arm-multi_v7_nosmp_defconfig : OFFLINE 2:33.54 socfpga arm-socfpga_defconfig : OFFLINE 4:09.08 socfpga arm-multi_v7_defconfig : OFFLINE 2:05.64 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 3:21.85 wandboard arm-multi_v7_defconfig : OFFLINE 2:05.96 wandboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:29.01

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 0.542041] 12100000.phy supply vbus not found, using dummy regulator [ 0.542073] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.550297] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.550307] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.551908] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.551917] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.552394] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.552403] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.552881] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.552889] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.584283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.585590] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10 [ 0.585792] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10 [ 0.585975] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 1.458439] console [ttySAC2] enabled [ 1.462275] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.471302] SuperH (H)SCI(F) driver initialized [ 1.476041] msm_serial: driver initialized [ 1.479967] STMicroelectronics ASC driver initialized [ 1.485617] [drm] Initialized drm 1.1.0 20060810 [ 1.494132] loop: module loaded [ 1.496837] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 1.505639] libphy: Fixed MDIO Bus: probed [ 1.508657] CAN device driver interface [ 1.513029] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.519021] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.526620] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.532571] usbcore: registered new interface driver pegasus [ 1.538219] usbcore: registered new interface driver asix [ 1.543592] usbcore: registered new interface driver ax88179_178a [ 1.549673] usbcore: registered new interface driver cdc_ether [ 1.555495] usbcore: registered new interface driver smsc75xx [ 1.561226] usbcore: registered new interface driver smsc95xx [ 1.566943] usbcore: registered new interface driver net1080 [ 1.572584] usbcore: registered new interface driver cdc_subset [ 1.578485] usbcore: [PYBOOT] [arndale 01:32]: got exception: panic ~$off

[PYBOOT] [arndale 01:33]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.068950] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.075283] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.082165] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.091772] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.101284] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.108309] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.151784] ledtrig-cpu: registered to indicate activity on CPUs [ 2.159954] oprofile: using arm/armv7 [ 2.165147] Initializing XFRM netlink socket [ 2.170221] NET: Registered protocol family 10 [ 2.180639] sit: IPv6 over IPv4 tunneling driver [ 2.189429] NET: Registered protocol family 17 [ 2.194358] NET: Registered protocol family 15 [ 2.199659] Key type dns_resolver registered [ 2.204608] omap_voltage_late_init: Voltage driver support not added [ 2.211352] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.219826] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.230107] ThumbEE CPU extension supported. [ 2.234761] Registering SWP/SWPB emulation handler [ 2.239802] SmartReflex Class3 initialized [ 2.296756] mmc1: MAN_BKOPS_EN bit is not set [ 2.306682] mmc1: new high speed MMC card at address 0001 [ 2.318251] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.328600] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.339353] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.355276] mmcblk0: p1 p2 [ 2.378399] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.385760] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.398402] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.406729] hctosys: unable to open rtc device (rtc0) [ 2.412175] sr_init: No PMIC hook to init smartreflex [ 2.417830] sr_init: platform driver register failed for SR [ 2.462953] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:01]: got exception: timeout ~$off

[PYBOOT] [bbb 02:02]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.571435] NET: Registered protocol family 10 [ 1.576709] sit: IPv6 over IPv4 tunneling driver [ 1.581988] NET: Registered protocol family 17 [ 1.586648] can: controller area network core (rev 20120528 abi 9) [ 1.593149] NET: Registered protocol family 29 [ 1.597812] can: raw protocol (rev 20120528) [ 1.602293] can: broadcast manager protocol (rev 20120528 t) [ 1.608220] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614252] Key type dns_resolver registered [ 1.618810] omap_voltage_late_init: Voltage driver support not added [ 1.625949] Power Management for TI OMAP4+ devices. [ 1.631252] ThumbEE CPU extension supported. [ 1.635745] Registering SWP/SWPB emulation handler [ 1.642538] palmas 0-0058: Irq flag is 0x00000008 [ 1.667147] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698764] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712930] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735453] rtc-ds1307 2-006f: SET TIME! [ 1.741209] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.747964] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752563] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761368] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.795940] vdd_3v3: supplied by regen1 [ 1.836835] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.853886] aic_dvdd_fixed: disabling [ 1.857901] ldousb: disabling [ 1.861941] Waiting for root device /dev/mmcblk1p1... [ 1.869554] mmc1: MAN_BKOPS_EN bit is not set [ 1.881606] mmc1: new high speed MMC card at address 0001 [ 1.887586] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892475] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898832] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905697] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.180359] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.190744] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195619] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.201945] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.208821] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218423] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.227946] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.234996] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.282793] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289109] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296003] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.305632] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315157] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322226] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328349] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.334679] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.341581] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351243] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.360785] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.367860] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374680] vdd_3v3: supplied by regen1 [ 2.413141] hctosys: unable to open rtc device (rtc0) [ 2.418463] sr_init: No PMIC hook to init smartreflex [ 2.424017] sr_init: platform driver register failed for SR [ 2.467100] mmc1: MAN_BKOPS_EN bit is not set [ 2.475592] aic_dvdd_fixed: disabling [ 2.479825] ldousb: disabling [ 2.484259] mmc1: new high speed MMC card at address 0001 [ 2.490579] Waiting for root device /dev/mmcblk1p1... [ 2.496058] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.501445] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.508356] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.516771] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:47]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.157926] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.163510] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.170115] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.180106] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.189281] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.194760] vdd_1v8_gen: supplied by vdd_5v_in [ 3.200346] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.206957] [drm] No driver support for vblank timestamp query. [ 3.212886] drm drm: No connectors reported connected with modes [ 3.218889] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.238125] Console: switching to colour frame buffer device 128x48 [ 3.249878] drm drm: fb0: frame buffer device [ 3.254314] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.262268] usb3_vbus: supplied by vdd_5v_in [ 3.268513] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.274959] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.280363] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.288084] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.303005] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.309355] hub 1-0:1.0: USB hub found [ 3.313119] hub 1-0:1.0: 1 port detected [ 3.317771] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.323178] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.330830] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.343003] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.349274] hub 2-0:1.0: USB hub found [ 3.353038] hub 2-0:1.0: 1 port detected [ 3.360522] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.373795] vdd_sata,avdd_plle: disabling [ 3.378183] usb1_vbus: disabling [ 3.382090] Waiting for root device /dev/mmcblk1p1... [ 3.663010] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.601524] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 03:32]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 03:33]: got exception: timeout ~$off

[PYBOOT] [beaver 03:34]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.603921] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.613923] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.622794] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.628320] vdd_1v8_gen: supplied by vdd_5v_in [ 3.636698] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.643335] [drm] No driver support for vblank timestamp query. [ 3.649333] drm drm: No connectors reported connected with modes [ 3.655349] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.681450] Console: switching to colour frame buffer device 128x48 [ 3.693214] drm drm: fb0: frame buffer device [ 3.720411] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.727912] usb3_vbus: supplied by vdd_5v_in [ 3.734022] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.740489] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.745903] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.753877] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.770420] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.778109] hub 1-0:1.0: USB hub found [ 3.781901] hub 1-0:1.0: 1 port detected [ 3.786693] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.792127] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.799991] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.820411] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.827984] hub 2-0:1.0: USB hub found [ 3.831766] hub 2-0:1.0: 1 port detected [ 3.840024] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.858996] vdd_sata,avdd_plle: disabling [ 3.863484] usb1_vbus: disabling [ 3.866915] ALSA device list: [ 3.869872] #0: NVIDIA Tegra Beaver [ 3.874148] Waiting for root device /dev/mmcblk1p1... [ 4.150418] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.135744] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:48]: got exception: timeout ~$off

[PYBOOT] [beaver 01:49]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 40.762786] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 81.708978] random: dd: uninitialized urandom read (512 bytes read, 51 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 86.168151] eth0: device MAC address 12:6e:aa:55:ba:4c [ 86.313421] RX IPC Checksum Offload disabled [ 86.318040] No MAC Management Counters available Listening on LPF/eth0/12:6e:aa:55:ba:4c Sending on LPF/eth0/12:6e:aa:55:ba:4c Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2.

[PYBOOT] [colombus 03:25]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:26]: got exception: timeout ~$off

[PYBOOT] [colombus 03:27]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.942867] usbhid: USB HID core driver [ 1.953885] NET: Registered protocol family 10 [ 1.954948] sit: IPv6 over IPv4 tunneling driver [ 1.958205] NET: Registered protocol family 17 [ 1.961742] NET: Registered protocol family 15 [ 1.966408] Registering SWP/SWPB emulation handler [ 1.972799] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.976539] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.984103] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.995050] mmc1: MAN_BKOPS_EN bit is not set [ 1.996407] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.004154] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.014032] mmc1: new DDR MMC card at address 0001 [ 2.018506] max98090 1-0010: MAX98090 REVID=0x43 [ 2.025551] max98090 1-0010: use default 2.8v micbias [ 2.028294] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 2.033051] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.039282] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.042456] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.047756] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.053014] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.064531] mmcblk0: p1 p2 [ 2.065138] hub 1-3:1.0: USB hub found [ 2.065299] hub 1-3:1.0: 3 ports detected [ 2.079655] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.084338] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.112990] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:23 UTC (946688423) [ 2.139825] VDD10_HDMI_1.0V: disabling [ 2.140642] vdd_g3d: disabling [ 2.141709] BUCK8_2.8V: disabling [ 2.145832] ALSA device list: [ 2.147217] #0: Odroid-U3 [ 2.151107] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:13]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:14]: Done. Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.390506] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.396413] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.429629] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.430140] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436396] ledtrig-cpu: registered to indicate activity on CPUs [ 1.441223] usbcore: registered new interface driver usbhid [ 1.446655] usbhid: USB HID core driver [ 1.453161] NET: Registered protocol family 10 [ 1.455336] sit: IPv6 over IPv4 tunneling driver [ 1.459824] NET: Registered protocol family 17 [ 1.463908] can: controller area network core (rev 20120528 abi 9) [ 1.470103] NET: Registered protocol family 29 [ 1.474477] can: raw protocol (rev 20120528) [ 1.478741] can: broadcast manager protocol (rev 20120528 t) [ 1.484381] can: netlink gateway (rev 20130117) max_hops=1 [ 1.490082] Key type dns_resolver registered [ 1.494205] ThumbEE CPU extension supported. [ 1.498352] Registering SWP/SWPB emulation handler [ 1.505877] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.535135] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.547236] mmc1: MAN_BKOPS_EN bit is not set [ 1.547870] VDD10_HDMI_1.0V: disabling [ 1.548555] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.548766] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.549042] mmc1: new DDR MMC card at address 0001 [ 1.549903] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.550072] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.550249] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.550427] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.560258] mmcblk0: p1 p2 [ 1.599324] vdd_g3d: disabling [ 1.602349] BUCK8_2.8V: disabling [ 1.607416] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 03:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 03:42]: got exception: timeout ~$off

[PYBOOT] [odroidu3 03:44]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.651270] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657650] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.668022] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674488] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679901] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687642] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699676] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.706242] hub 3-0:1.0: USB hub found [ 1.710038] hub 3-0:1.0: 1 port detected [ 1.717380] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723990] [drm] No driver support for vblank timestamp query. [ 1.730813] mmc2: switch to bus width 2 failed [ 1.756974] mmc2: switch to bus width 1 failed [ 1.761429] mmc2: new high speed MMC card at address 0001 [ 1.774996] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.775105] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.775241] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.776324] mmcblk0: p3 [ 1.842447] Console: switching to colour frame buffer device 170x48 [ 1.880080] drm drm: fb0: frame buffer device [ 1.884531] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.890972] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.897879] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.909836] vdd_1v5: disabling [ 1.912896] vdd_1v2: disabling [ 1.922377] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.935844] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.944166] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.957053] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.981642] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.990459] mmc0: new SDIO card at address 0001 [ 2.515727] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.527013] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 02:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 03:00]: got exception: timeout ~$off

[PYBOOT] [seaboard 03:01]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.891280] Bluetooth: BNEP socket layer initialized [ 1.896279] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.902272] Bluetooth: HIDP socket layer initialized [ 1.908095] Key type dns_resolver registered [ 1.914013] Registering SWP/SWPB emulation handler [ 1.923318] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.934650] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.942057] VDDIO_HDMI: supplied by vdd_5v0 [ 1.946845] vdd_sys: supplied by vdd_5v0 [ 1.951162] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.956160] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.962702] mmc0: new SDIO card at address 0001 [ 1.962780] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.975909] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.982373] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.987793] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.995676] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 2.020834] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.028505] hub 3-0:1.0: USB hub found [ 2.032318] hub 3-0:1.0: 1 port detected [ 2.041916] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.048514] [drm] No driver support for vblank timestamp query. [ 2.144138] Console: switching to colour frame buffer device 170x48 [ 2.160623] drm drm: fb0: frame buffer device [ 2.190839] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.197684] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.205066] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.222314] vdd_1v5: disabling [ 2.225363] vdd_1v2: disabling [ 2.228519] ALSA device list: [ 2.231496] #0: NVIDIA Tegra Seaboard [ 2.457699] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.468788] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 03:13]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 03:14]: got exception: timeout ~$off

[PYBOOT] [seaboard 03:15]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.547882] iio iio:device1: registered pressure sensor lps001wp [ 2.554504] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.560455] coresight-etb10 801a4000.etb: ETB initialized [ 2.566284] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.572814] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.580108] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.586303] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.598937] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.609680] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.619598] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.630340] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.656646] NET: Registered protocol family 10 [ 2.672424] sit: IPv6 over IPv4 tunneling driver [ 2.677978] NET: Registered protocol family 17 [ 2.682495] NET: Registered protocol family 35 [ 2.687042] NET: Registered protocol family 37 [ 2.691650] Registering SWP/SWPB emulation handler [ 2.708526] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.716064] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-01 00:00:28 UTC (946684828) [ 2.725646] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.732666] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.739654] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.746612] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.760406] db8500-esram12: disabling [ 2.764160] db8500-esram34: disabling [ 2.768096] V-CSI/DSI: disabling [ 2.771392] mmci-reg: disabling [ 2.774688] ALSA device list: [ 2.777648] #0: MOP500-card [ 2.780975] uart-pl011 80007000.uart: DMA channel TX dma0chan12 [ 2.786956] uart-pl011 80007000.uart: DMA channel RX dma0chan13 [ 2.793182] Waiting for root device /dev/mmcblk3p4... [ 73.301452] random: nonblocking pool is initialized

[PYBOOT] [snowball 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:08]: got exception: timeout ~$off

[PYBOOT] [snowball 02:09]: Done.