Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160517/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.52 bbb arm-multi_v7_defconfig : FAILED 1:59.81 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.88 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.73 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.00 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.26 cosmic arm-multi_v7_defconfig : FAILED 2:04.98 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:54.32 dalmore arm-multi_v7_defconfig : FAILED 1:58.27 dalmore arm-multi_lpae_defconfig : FAILED 2:01.00 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.83 omap5uevm arm-multi_v7_defconfig : FAILED 0:50.84 omap5uevm arm-multi_lpae_defconfig : FAILED 0:47.76 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:03.72 pi arm-multi_lpae_defconfig : FAILED 1:50.56 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 3:04.74 snowball arm-multi_v7_defconfig : FAILED 2:04.19 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.35 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.51 arndale arm-exynos_defconfig : passed 1:30.81 arndale arm-multi_v7_defconfig : passed 1:21.73 arndale arm-multi_lpae_defconfig : passed 1:26.67 capri arm-bcm_defconfig : passed 1:00.49 capri arm-multi_v7_defconfig : passed 0:51.27 chitra powerpc-ppc64_defconfig : passed 1:56.74 colombus arm-sunxi_defconfig : passed 2:34.68 colombus arm-multi_v7_defconfig : passed 2:40.41 colombus arm-multi_lpae_defconfig : passed 2:32.69 cubie arm-sunxi_defconfig : passed 0:51.58 cubie arm-multi_v7_defconfig : passed 0:49.42 cubie2 arm-sunxi_defconfig : passed 0:50.28 cubie2 arm-multi_v7_defconfig : passed 0:55.36 cubie2 arm-multi_lpae_defconfig : passed 0:53.16 cubox arm-multi_v7_defconfig : passed 1:22.68 cubox arm-mvebu_v7_defconfig : passed 1:12.22 hummingboard arm-imx_v6_v7_defconfig : passed 1:40.59 hummingboard arm-multi_v7_defconfig : passed 1:13.20 jetsontk1 arm-tegra_defconfig : warnings 0:52.47 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.21 jetsontk1 arm-multi_lpae_defconfig : warnings 0:50.03 omap5uevm arm-omap2plus_defconfig : passed 1:06.13 pandaes arm-omap2plus_defconfig : warnings 1:38.18 pandaes arm-multi_v7_defconfig : passed 1:47.23 pi arm-exynos_defconfig : passed 2:11.60 pit arm-exynos_defconfig : passed 2:10.29 pit arm-multi_v7_defconfig : passed 2:17.52 pit arm-multi_lpae_defconfig : passed 2:13.09 seattle arm64-defconfig : passed 2:10.45 snow arm-exynos_defconfig : passed 2:05.72 snow arm-multi_v7_defconfig : passed 2:03.73 snow arm-multi_lpae_defconfig : passed 2:00.11 trimslice arm-tegra_defconfig : warnings 1:34.26 trimslice arm-multi_v7_defconfig : warnings 1:33.58 wandboard arm-multi_v7_defconfig : passed 1:07.98
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.37 beaver arm-multi_v7_defconfig : OFFLINE 2:16.01 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.71 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:18.67 parallella arm-multi_v7_defconfig : OFFLINE 2:17.91 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.76 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.80 sama5 arm-sama5_defconfig : OFFLINE 2:22.43 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:20.01 seaboard arm-tegra_defconfig : OFFLINE 2:12.67 seaboard arm-multi_v7_defconfig : OFFLINE 2:12.84 socfpga arm-socfpga_defconfig : OFFLINE 2:17.33 socfpga arm-multi_v7_defconfig : OFFLINE 2:19.02
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.564571] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.630496] Synopsys Designware Multimedia Card Interface Driver [ 1.638304] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.648211] ledtrig-cpu: registered to indicate activity on CPUs [ 1.655446] usbcore: registered new interface driver usbhid [ 1.661364] usbhid: USB HID core driver [ 1.673275] NET: Registered protocol family 10 [ 1.679819] sit: IPv6 over IPv4 tunneling driver [ 1.685956] NET: Registered protocol family 17 [ 1.690710] can: controller area network core (rev 20120528 abi 9) [ 1.697355] NET: Registered protocol family 29 [ 1.702065] can: raw protocol (rev 20120528) [ 1.706575] can: broadcast manager protocol (rev 20120528 t) [ 1.712557] can: netlink gateway (rev 20130117) max_hops=1 [ 1.719314] Key type dns_resolver registered [ 1.724185] omap_voltage_late_init: Voltage driver support not added [ 1.731129] ThumbEE CPU extension supported. [ 1.735679] Registering SWP/SWPB emulation handler [ 1.780460] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.786899] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.794622] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.803242] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811099] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818853] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826604] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.833949] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.841012] hctosys: unable to open rtc device (rtc0) [ 1.854507] Waiting for root device /dev/mmcblk0p2... [ 1.860229] mmc1: new high speed MMC card at address 0001 [ 1.867019] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.872310] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.878962] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.887585] mmcblk1: p1 p2
[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:57]: got exception: timeout ~$off
[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.053105] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059234] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.065571] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.072456] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082066] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.091579] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.098605] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.141720] ledtrig-cpu: registered to indicate activity on CPUs [ 2.150395] oprofile: using arm/armv7 [ 2.155371] Initializing XFRM netlink socket [ 2.160506] NET: Registered protocol family 10 [ 2.170883] sit: IPv6 over IPv4 tunneling driver [ 2.179835] NET: Registered protocol family 17 [ 2.184757] NET: Registered protocol family 15 [ 2.189982] Key type dns_resolver registered [ 2.194836] omap_voltage_late_init: Voltage driver support not added [ 2.201583] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.210064] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.219666] ThumbEE CPU extension supported. [ 2.224301] Registering SWP/SWPB emulation handler [ 2.229331] SmartReflex Class3 initialized [ 2.300082] mmc1: new high speed MMC card at address 0001 [ 2.313078] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.323244] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.334015] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.349319] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.356714] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.368815] mmcblk1: p1 p2 [ 2.376996] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.396486] hctosys: unable to open rtc device (rtc0) [ 2.402000] sr_init: No PMIC hook to init smartreflex [ 2.407717] sr_init: platform driver register failed for SR [ 2.448317] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.166675] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.181462] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.188541] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215453] rtc-ds1307 2-006f: SET TIME! [ 2.221233] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.227994] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232613] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.240882] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246672] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.254918] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.264094] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.270980] hub 1-0:1.0: USB hub found [ 2.274945] hub 1-0:1.0: 1 port detected [ 2.279346] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.285129] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.293247] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302275] hub 2-0:1.0: USB hub found [ 2.306248] hub 2-0:1.0: 1 port detected [ 2.312359] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376486] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394309] aic_dvdd_fixed: disabling [ 2.399043] Waiting for root device /dev/mmcblk0p1... [ 2.422029] mmc1: new high speed MMC card at address 0001 [ 2.428065] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.432977] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.439331] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446241] mmcblk1: p1 [ 2.584952] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741386] hub 1-1:1.0: USB hub found [ 2.745382] hub 1-1:1.0: 4 ports detected [ 2.824986] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853376] hub 2-1:1.0: USB hub found [ 2.857365] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.170741] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.185452] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.192524] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215305] rtc-ds1307 2-006f: SET TIME! [ 2.221031] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.227784] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232403] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.240662] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246452] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.254693] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.263865] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.270733] hub 1-0:1.0: USB hub found [ 2.274687] hub 1-0:1.0: 1 port detected [ 2.279095] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.284876] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.292989] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302012] hub 2-0:1.0: USB hub found [ 2.305983] hub 2-0:1.0: 1 port detected [ 2.312107] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376333] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394573] aic_dvdd_fixed: disabling [ 2.399286] Waiting for root device /dev/mmcblk0p1... [ 2.431888] mmc1: new high speed MMC card at address 0001 [ 2.437922] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.442835] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.449190] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.456108] mmcblk1: p1 [ 2.584813] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741131] hub 1-1:1.0: USB hub found [ 2.745123] hub 1-1:1.0: 4 ports detected [ 2.824845] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853120] hub 2-1:1.0: USB hub found [ 2.857107] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.199868] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.206168] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.213060] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.223453] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.228324] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.234626] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.241479] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.251078] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.260579] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.267642] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.317391] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.323690] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.330565] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.340164] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.349663] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.356706] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.362829] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.369142] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.375989] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.385590] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.395098] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.402144] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.447505] hctosys: unable to open rtc device (rtc0) [ 4.452800] sr_init: No PMIC hook to init smartreflex [ 4.458314] sr_init: platform driver register failed for SR [ 4.499110] mmc1: new high speed MMC card at address 0001 [ 4.504560] aic_dvdd_fixed: disabling [ 4.508912] ldousb: disabling [ 4.511156] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.511920] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.512664] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.530935] mmcblk1: p1 [ 4.538652] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.438124] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.512356] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.522682] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.596914] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.607238] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.681459] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.691785] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.766012] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.776337] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.850514] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.860839] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.935067] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.945394] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.019588] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.029912] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.104139] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.114458] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.188622] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.198941] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.273163] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.283502] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.357668] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.367990] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.442212] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.452534] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.526752] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.537071] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.611290] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.621616] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.695855] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.706179] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.780345] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.790672] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.070057] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.144040] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.154116] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.228101] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.238176] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.312188] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.322262] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.396245] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.406323] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.480311] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.490391] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.564376] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.574463] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.648455] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.658525] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.732510] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.742584] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.816570] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.826643] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.900631] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.910703] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.984685] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.994755] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.068742] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.078814] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.152806] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.162884] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.236866] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.246943] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.320929] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.331003] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.404979] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.415055] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.803394] can: netlink gateway (rev 20130117) max_hops=1 [ 2.810396] Key type dns_resolver registered [ 2.816861] ThumbEE CPU extension supported. [ 2.821248] Registering SWP/SWPB emulation handler [ 2.837525] usb1_vbus: supplied by vdd-sys-5v0 [ 2.847790] usb2_vbus: supplied by vdd-sys-5v0 [ 2.866387] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.891773] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.898559] [drm] No driver support for vblank timestamp query. [ 2.917275] mmc1: new high speed MMC card at address 0001 [ 2.927316] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.934384] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.943156] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.952366] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.962130] mmcblk1: p1 [ 3.077368] Console: switching to colour frame buffer device 240x75 [ 3.166261] drm drm: fb0: frame buffer device [ 3.196059] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.211346] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.217008] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.226786] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.241070] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.250390] hub 1-0:1.0: USB hub found [ 3.254429] hub 1-0:1.0: 1 port detected [ 3.265263] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.280679] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.343573] dvdd_ts: disabling [ 3.346832] usb1_vbus: disabling [ 3.350095] vdd_cam_1v8_reg: disabling [ 3.357760] Waiting for root device /dev/mmcblk0p1... [ 3.566099] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.543564] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.818784] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.803771] can: netlink gateway (rev 20130117) max_hops=1 [ 2.810848] Key type dns_resolver registered [ 2.817214] ThumbEE CPU extension supported. [ 2.821602] Registering SWP/SWPB emulation handler [ 2.846789] usb1_vbus: supplied by vdd-sys-5v0 [ 2.856205] usb2_vbus: supplied by vdd-sys-5v0 [ 2.873019] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.897440] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.904188] [drm] No driver support for vblank timestamp query. [ 2.915353] mmc1: new high speed MMC card at address 0001 [ 2.924375] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.931335] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.939285] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.947816] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.958131] mmcblk1: p1 [ 3.082715] Console: switching to colour frame buffer device 240x75 [ 3.171623] drm drm: fb0: frame buffer device [ 3.195922] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.211160] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.216747] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.225686] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.240954] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.251266] hub 1-0:1.0: USB hub found [ 3.255256] hub 1-0:1.0: 1 port detected [ 3.265269] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.277108] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.332586] dvdd_ts: disabling [ 3.335834] usb1_vbus: disabling [ 3.339093] vdd_cam_1v8_reg: disabling [ 3.346336] Waiting for root device /dev/mmcblk0p1... [ 3.565955] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.543499] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 59.485898] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.630912] Bluetooth: RFCOMM socket layer initialized [ 5.636133] Bluetooth: RFCOMM ver 1.11 [ 5.639947] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.645420] Bluetooth: BNEP socket layer initialized [ 5.650478] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.656480] Bluetooth: HIDP socket layer initialized [ 5.662812] Key type dns_resolver registered [ 5.672232] Registering SWP/SWPB emulation handler [ 5.690543] usb1_vbus: supplied by vdd-sys-5v0 [ 5.699771] usb2_vbus: supplied by vdd-sys-5v0 [ 5.716653] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.746418] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.753224] [drm] No driver support for vblank timestamp query. [ 5.932104] Console: switching to colour frame buffer device 240x75 [ 6.020941] drm drm: fb0: frame buffer device [ 6.050688] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.059751] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.065609] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 6.076005] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 6.100853] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 6.114683] hub 1-0:1.0: USB hub found [ 6.118713] hub 1-0:1.0: 1 port detected [ 6.132051] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 6.147769] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.237790] dvdd_ts: disabling [ 6.241031] usb1_vbus: disabling [ 6.244299] vdd_cam_1v8_reg: disabling [ 6.248864] ALSA device list: [ 6.251925] #0: NVIDIA Tegra Dalmore [ 6.257731] Waiting for root device /dev/mmcblk0p1... [ 6.440725] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.483855] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.620680] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.819243] Key type dns_resolver registered [ 1.823562] Registering SWP/SWPB emulation handler [ 1.841477] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.843784] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.851216] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.858346] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.864964] [drm] No driver support for vblank timestamp query. [ 1.870870] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.876670] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.886715] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.896422] mmc1: new DDR MMC card at address 0001 [ 1.901499] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.905396] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.905493] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.905500] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.905918] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.906116] hub 1-3:1.0: USB hub found [ 1.906228] hub 1-3:1.0: 3 ports detected [ 1.906468] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.906989] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.908248] mmcblk1: p1 p2 [ 1.952972] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.981914] max98090 1-0010: MAX98090 REVID=0x43 [ 1.984216] max98090 1-0010: use default 2.8v micbias [ 1.992193] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.995763] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.032795] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.049071] VDD10_HDMI_1.0V: disabling [ 2.049761] vdd_g3d: disabling [ 2.050829] BUCK8_2.8V: disabling [ 2.054781] ALSA device list: [ 2.056477] #0: Odroid-U3 [ 2.060066] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:47]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.219167] r10: ee5035c0 r9 : eefd8280 r8 : eefd8280 [ 2.224613] r7 : eefd8348 r6 : ee503674 r5 : eefd8694 r4 : ee503480 [ 2.231407] r3 : eefd834c r2 : 00000010 r1 : eefd8694 r0 : eefd8348 [ 2.238200] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.245716] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.251696] Process swapper/1 (pid: 0, stack limit = 0xee098220) [ 2.257947] Stack: (0xee099eb8 to 0xee09a000) [ 2.262478] 9ea0: fa213000 c140e628 [ 2.271001] 9ec0: ee099edc c036156c eefd8280 eefd8280 00000004 ee503480 eefd8280 00000004 [ 2.279519] 9ee0: 0000e000 fa212000 fa213000 c140e628 ee099f0c c0363614 00000000 eefd8280 [ 2.288041] 9f00: a0000193 0000e000 ee099f2c c036461c ee077480 ffffe000 c1302690 c1215280 [ 2.296565] 9f20: c1302690 ffffe000 ee099f4c c036557c c12134dc 00000001 00000000 ee099f88 [ 2.305088] 9f40: fa212000 fa213000 c1302510 c030eaf0 c1302870 c1340578 fa21200c ee099f88 [ 2.313604] 9f60: fa212000 c03017e0 c0308780 a0000013 ffffffff ee099fbc c1214580 c1302508 [ 2.322127] 9f80: c140e628 c030c514 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.330652] 9fa0: 00000000 00000000 c1214580 c1302508 c140e628 c1302510 2ddc3000 ee099fd8 [ 2.339170] 9fc0: c032b054 c0308780 a0000013 ffffffff 00000051 c030877c ee098000 c03791e0 [ 2.347694] 9fe0: 00000051 ee099fe0 ae08006a c14106b0 00000000 80301c8c 008141e4 01100020 [ 2.356226] [<c05954c4>] (plist_del) from [<c0375cf4>] (enqueue_task_rt+0x228/0x2f4) [ 2.364290] [<c0375cf4>] (enqueue_task_rt) from [<c0363614>] (ttwu_do_activate+0x38/0x70) [ 2.372817] [<c0363614>] (ttwu_do_activate) from [<c036461c>] (sched_ttwu_pending+0x6c/0x90) [ 2.381610] [<c036461c>] (sched_ttwu_pending) from [<c036557c>] (scheduler_ipi+0x50/0x144) [ 2.390217] [<c036557c>] (scheduler_ipi) from [<c030eaf0>] (handle_IPI+0x128/0x194) [ 2.398198] [<c030eaf0>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.406084] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.413876] Exception stack(0xee099f88 to 0xee099fd0) [ 2.419133] 9f80: 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.427645] 9fa0: 00000000 00000000 c1214580 c1302508 c140e628 c1302510 2ddc3000 ee099fd8 [ 2.436156] 9fc0: c032b054 c0308780 a0000013 ffffffff [ 2.441417] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.449122] [<c0308780>] (arch_cpu_idle) from [<c03791e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.457734] [<c03791e0>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 2.464987] Code: 0a00000f e590200c e1520001 0a000007 (e512c008) [ 2.471330] ---[ end trace 385e9649ef4426a0 ]--- [ 2.476131] Kernel panic - not syncing: Fatal exception in interrupt [ 2.482748] C[ [PYBOOT] [omap5uevm 00:45]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:46]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.254510] [<c0b89b80>] (_raw_spin_lock_irqsave) from [<c036407c>] (try_to_wake_up+0x28/0x2ac) [ 2.254516] [<c036407c>] (try_to_wake_up) from [<c0385c30>] (handle_irq_event_percpu+0x74/0x14c) [ 2.254521] [<c0385c30>] (handle_irq_event_percpu) from [<c0385d4c>] (handle_irq_event+0x44/0x68) [ 2.254526] [<c0385d4c>] (handle_irq_event) from [<c0388f80>] (handle_fasteoi_irq+0xb4/0x194) [ 2.254531] [<c0388f80>] (handle_fasteoi_irq) from [<c03852ac>] (generic_handle_irq+0x24/0x34) [ 2.254535] [<c03852ac>] (generic_handle_irq) from [<c038555c>] (__handle_domain_irq+0x5c/0xb4) [ 2.254539] [<c038555c>] (__handle_domain_irq) from [<c03017a0>] (gic_handle_irq+0x54/0x98) [ 2.254543] [<c03017a0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.254545] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.254548] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.254552] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e628 c1302510 [ 2.254555] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.254560] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.254566] [<c0308780>] (arch_cpu_idle) from [<c03791e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.254574] [<c03791e0>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.254580] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.254584] Code: 3afffff6 e8bd8070 e30f3e04 e34c3133 (e593200c) [ 2.254589] ---[ end trace c19a90310d29ee01 ]--- [ 2.254592] Kernel panic - not syncing: Fatal exception in interrupt [ 2.254596] CPU1: stopping [ 2.254600] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.6.0-next-20160517 #1 [ 2.254602] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.254612] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.254619] [<c030b9b0>] (show_stack) from [<c0591b54>] (dump_stack+0x88/0x9c) [ 2.254625] [<c0591b54>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.254631] [<c030eb3c>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.254635] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.254637] Exception stack(0xee099f88 to 0xee099fd0) [ 2.254641] 9f80: 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.254645] 9fa0: 00000000 00000000 c1214580 c1302508 c140e628 c1302510 60000013 ee099fd8 [ 2.254648] 9fc0: c032b054 c0308780 a0000013 ffffffff [ 2.254654] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.254660] [<c0308780>] (arch_cpu_idle) from [<c03791e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.254665] [<c03791e0>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 3.091892] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:49]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:50]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.539171] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545523] isl29018 7-0044: Failed to read 1: -6 [ 1.550107] isl29018 7-0044: regmap initialization fails: -6 [ 1.561062] NET: Registered protocol family 10 [ 1.565494] sit: IPv6 over IPv4 tunneling driver [ 1.569073] NET: Registered protocol family 17 [ 1.573075] can: controller area network core (rev 20120528 abi 9) [ 1.579265] NET: Registered protocol family 29 [ 1.583654] can: raw protocol (rev 20120528) [ 1.587903] can: broadcast manager protocol (rev 20120528 t) [ 1.593545] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599272] Key type dns_resolver registered [ 1.603594] ThumbEE CPU extension supported. [ 1.607514] Registering SWP/SWPB emulation handler [ 1.617446] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622928] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629293] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634668] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644767] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655146] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660596] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670781] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676961] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682340] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.692066] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714497] Waiting for root device /dev/mmcblk0p1... [ 1.718375] mmc0: tuning execution failed: -5 [ 1.722431] mmc0: error -5 whilst initialising MMC card [ 2.583961] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598167] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603626] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609998] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615381] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:48]: got exception: timeout ~$off
[PYBOOT] [pi 01:50]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533726] isl29018 7-0044: No cache defaults, reading back from HW [ 1.540079] isl29018 7-0044: Failed to read 1: -6 [ 1.544664] isl29018 7-0044: regmap initialization fails: -6 [ 1.555571] NET: Registered protocol family 10 [ 1.560008] sit: IPv6 over IPv4 tunneling driver [ 1.563579] NET: Registered protocol family 17 [ 1.567589] can: controller area network core (rev 20120528 abi 9) [ 1.573778] NET: Registered protocol family 29 [ 1.578167] can: raw protocol (rev 20120528) [ 1.582416] can: broadcast manager protocol (rev 20120528 t) [ 1.588059] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593782] Key type dns_resolver registered [ 1.598111] ThumbEE CPU extension supported. [ 1.602027] Registering SWP/SWPB emulation handler [ 1.611931] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617414] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623780] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629155] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.639250] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649583] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.655029] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.665213] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671396] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676775] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686510] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708809] Waiting for root device /dev/mmcblk0p1... [ 1.712685] mmc0: tuning execution failed: -5 [ 1.716746] mmc0: error -5 whilst initialising MMC card [ 2.583533] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597677] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603135] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609508] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614891] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:01]: got exception: timeout ~$off
[PYBOOT] [pi 02:03]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.944305] usbcore: registered new interface driver usbhid [ 1.949981] usbhid: USB HID core driver [ 1.974151] NET: Registered protocol family 10 [ 1.981048] sit: IPv6 over IPv4 tunneling driver [ 1.986328] NET: Registered protocol family 17 [ 1.990783] can: controller area network core (rev 20120528 abi 9) [ 1.997039] NET: Registered protocol family 29 [ 2.001495] can: raw protocol (rev 20120528) [ 2.005767] can: broadcast manager protocol (rev 20120528 t) [ 2.011444] can: netlink gateway (rev 20130117) max_hops=1 [ 2.017486] Key type dns_resolver registered [ 2.021942] ThumbEE CPU extension supported. [ 2.024047] mmc3: new high speed MMC card at address 0001 [ 2.026428] mmcblk3: mmc3:0001 3.53 GiB [ 2.026641] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.026824] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.026977] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.032653] mmcblk3: p1 p2 p3 p4 [ 2.055023] Registering SWP/SWPB emulation handler [ 2.062164] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.068939] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.078124] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.085144] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.092132] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.099121] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.112426] db8500-esram12: disabling [ 2.116333] db8500-esram34: disabling [ 2.120086] en-3v3-fixed-supply: disabling [ 2.124450] V-CSI/DSI: disabling [ 2.127716] mmci-reg: disabling [ 2.131378] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.137359] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.143676] Waiting for root device /dev/mmcblk0p4...
[PYBOOT] [snowball 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:02]: got exception: timeout ~$off
[PYBOOT] [snowball 02:03]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 1.057800] usbcore: registered new device driver usb [ 1.064270] abx5x0-usb ab8500-usb.0: revision 0x30 driver initialized [ 1.071533] nmk-i2c 80004000.i2c: initialize Nomadik I2C at [mem 0x80004000-0x80004fff] on virtual base f094e000 [ 1.082366] nmk-i2c 80122000.i2c: initialize Nomadik I2C at [mem 0x80122000-0x80122fff] on virtual base f0950000 [ 1.093078] nmk-i2c 80128000.i2c: initialize Nomadik I2C at [mem 0x80128000-0x80128fff] on virtual base f0952000 [ 1.104522] nmk-i2c 80110000.i2c: initialize Nomadik I2C at [mem 0x80110000-0x80110fff] on virtual base f0954000 [ 1.115081] nmk-i2c 8012a000.i2c: initialize Nomadik I2C at [mem 0x8012a000-0x8012afff] on virtual base f0956000 [ 1.126129] Advanced Linux Sound Architecture Driver Initialized. [ 1.149841] clocksource: Switched to clocksource dbx500-prcmu-timer [ 1.166839] NET: Registered protocol family 2 [ 1.171905] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.179016] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.185577] TCP: Hash tables configured (established 8192 bind 8192) [ 1.192047] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.197998] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.204559] NET: Registered protocol family 1 [ 1.219146] RPC: Registered named UNIX socket transport module. [ 1.225158] RPC: Registered udp transport module. [ 1.229858] RPC: Registered tcp transport module. [ 1.234558] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.241516] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.250793] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.257568] workingset: timestamp_bits=28 max_order=18 bucket_order=0 [ 1.285095] bounce: pool size: 64 pages [ 1.288940] io scheduler noop registered [ 1.292907] io scheduler deadline registered [ 1.297210] io scheduler cfq registered (default) Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:02]: got exception: timeout ~$off
[PYBOOT] [snowball 03:03]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: cannot execute "/sbin/getty"
INIT: INIT: INIT: cannot execute "/sbin/getty" INIT: c[ 19.973625] mmcblk0: error -110 sending status command, retrying annot execute "/sbin/getty" can[ 19.982424] mmcblk0: error -110 sending status command, retrying not execute "/sbin/getty" INIT[ 19.991274] mmcblk0: error -110 sending status command, aborting : Id "1" respawning too fast: disabled for 5 minutes INIT: Id [ 20.002756] mmcblk0: error -110 sending status command, retrying "2" respawning too fast: disabled[ 20.011805] mmcblk0: error -110 sending status command, retrying for 5 minutes INIT: Id "6" re[ 20.020687] mmcblk0: error -110 sending status command, aborting spawning too fast: disabled for 5 minutes INIT: INIT: cannot e[ 20.032528] mmcblk0: error -110 sending status command, retrying xecute "/sbin/getty"cannot execut[ 20.041327] mmcblk0: error -110 sending status command, retrying e "/sbin/getty" [ 20.050170] mmcblk0: error -110 sending status command, aborting [ 20.061233] mmcblk0: error -110 sending status command, retrying [ 20.069695] mmcblk0: error -110 sending status command, retrying [ 20.078169] mmcblk0: error -110 sending status command, aborting [ 20.089201] mmcblk0: error -110 sending status command, retrying [ 20.097661] mmcblk0: error -110 sending status command, retrying [ 20.106080] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 54.004471] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter