next boot: 36 pass, 9 fail (next-20140327) - Kernel-build-reports

27 Mar 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20140327
Failed boot tests (console logs at the end)
===========================================
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    imx_v6_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    imx_v6_v7_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:  OFFLINE:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
               legacy,3730xm     0 min 52.1 sec:     PASS
            am335x-boneblack     0 min 25.9 sec:     PASS
             omap3-beagle-xm     0 min 59.0 sec:     PASS
           legacy,3530beagle     0 min 45.8 sec:     PASS  (Warnings: 1)
                 omap4-panda     1 min  8.5 sec:     PASS
            omap3-overo-tobi     0 min 23.3 sec:     PASS  (Warnings: 1)
                 am335x-bone     0 min 27.6 sec:     PASS
      omap3-overo-storm-tobi     0 min 25.1 sec:     PASS
                  omap5-uevm     1 min  0.1 sec:     PASS  (Warnings: 1)
              omap4-panda-es     1 min  5.7 sec:     PASS
            legacy,3730storm     0 min 20.4 sec:     PASS
            legacy,3530overo     0 min 21.3 sec:     PASS  (Warnings: 1)
multi_lpae_defconfig
--------------------
                  omap5-uevm     1 min 37.1 sec:     PASS  (Warnings: 1)
       sun7i-a20-cubieboard2     0 min 39.9 sec:     FAIL
tegra_defconfig
---------------
              tegra30-beaver     0 min 17.2 sec:     PASS
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     0 min 42.9 sec:     FAIL
  imx6dl-wandboard,wand-solo     0 min 42.6 sec:     FAIL
             imx6q-wandboard     0 min 40.8 sec:     FAIL
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     0 min 22.5 sec:     PASS
        sun4i-a10-cubieboard     0 min 12.9 sec:     PASS
bcm_defconfig
-------------
                 bcm28155-ap     0 min 22.7 sec:     PASS
exynos_defconfig
----------------
          exynos5250-arndale     0 min 28.8 sec:     PASS
multi_v7_defconfig
------------------
    qcom-apq8074-dragonboard     0 min 15.6 sec:     PASS
                ste-snowball     0 min 50.6 sec:     FAIL
              tegra30-beaver     0 min 19.8 sec:     PASS
            am335x-boneblack     0 min 24.0 sec:     PASS
             omap3-beagle-xm     0 min 50.7 sec:     PASS
       sun7i-a20-cubieboard2     0 min 39.9 sec:     FAIL
          armada-370-mirabox     0 min 22.3 sec:     PASS
                 omap4-panda     0 min 52.8 sec:     PASS
  armada-xp-openblocks-ax3-4     0 min 25.3 sec:     PASS
        sun4i-a10-cubieboard     0 min 14.5 sec:     PASS
                 bcm28155-ap     0 min 27.8 sec:     PASS
            omap3-overo-tobi     0 min 25.4 sec:     PASS  (Warnings: 1)
  imx6dl-wandboard,wand-solo     0 min 42.4 sec:     FAIL
                 am335x-bone     0 min 26.6 sec:     PASS
      omap3-overo-storm-tobi     0 min 23.9 sec:     PASS
                  omap5-uevm     1 min 43.1 sec:     PASS  (Warnings: 1)
             imx6q-wandboard     0 min 31.4 sec:  OFFLINE
              omap4-panda-es     0 min 56.2 sec:     PASS
  imx6dl-wandboard,wand-dual     0 min 42.6 sec:     FAIL
u8500_defconfig
---------------
                ste-snowball     0 min 30.6 sec:     PASS
sama5_defconfig
---------------
                  sama5d35ek     0 min 17.4 sec:     PASS
davinci_all_defconfig
---------------------
             legacy,dm365evm     0 min 17.5 sec:     PASS
                   da850-evm     0 min 16.2 sec:     PASS
Console logs for failures
=========================
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA
sun7i#setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-q144tr/zImage
tftp 0x40800000 192.168.1.2:tmp/cubie2-q144tr/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-q144tr/zImage'.
Load address: 0x40800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ######################################################
     2.7 MiB/s
done
Bytes transferred = 4595056 (461d70 hex)
sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x43000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-q144tr/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-q144tr/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-q144tr/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     2.5 MiB/s
done
Bytes transferred = 18209 (4721 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40800000 0x43000000 0x41000000
bootz 0x40800000 0x43000000 0x41000000
Kernel image @ 0x40800000 [ 0x000000 - 0x461d70 ]
## Loading init Ramdisk from Legacy Image at 43000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 39.86 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.156
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=>if test -n ${netargs}; then run netargs; fi
 if test -n ${netargs}; then run netargs; fi
=> tftp 0x10800000 192.168.1.2:tmp/wand-dual-kYXzWM/zImage
tftp 0x10800000 192.168.1.2:tmp/wand-dual-kYXzWM/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-kYXzWM/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     1.5 MiB/s
done
Bytes transferred = 5223928 (4fb5f8 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-dual-kYXzWM/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-dual-kYXzWM/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-kYXzWM/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 26637 (680d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=>bootz 0x10800000 0x11100000 0x11000000
 bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100980c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.87 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.164
=>setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x10800000 192.168.1.2:tmp/wand-solo-Wz2qYi/zImage
tftp 0x10800000 192.168.1.2:tmp/wand-solo-Wz2qYi/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-Wz2qYi/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     1.5 MiB/s
done
Bytes transferred = 5223928 (4fb5f8 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-solo-Wz2qYi/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-solo-Wz2qYi/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-Wz2qYi/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.3 MiB/s
done
Bytes transferred = 26637 (680d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100980c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.62 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 80 lines of boot log:
    -------------------------------------------------
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
=> setenv bootargs console=ttymxc0,115200
setenv bootargs console=ttymxc0,115200
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.163
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=>tftp 0x10800000 192.168.1.2:tmp/wand-quad-W8AhmW/zImage
 tftp 0x10800000 192.168.1.2:tmp/wand-quad-W8AhmW/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-W8AhmW/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     2.7 MiB/s
done
Bytes transferred = 5223928 (4fb5f8 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-quad-W8AhmW/imx6q-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-quad-W8AhmW/imx6q-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-W8AhmW/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
     2.6 MiB/s
done
Bytes transferred = 29426 (72f2 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4fb5f8 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 40.84 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
CPU:	ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz
I2C:   ready
DRAM:   1 GB
MMC: 	
MCDE:  startup failed
sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2
EMMC: 0, MMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   smc911x-0
Hit any key to stop autoboot:  1 
 0 
U8500 $ 
U8500 $ version
version
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e
setenv ethaddr 6e:e6:84:36:8e:9e
Can't overwrite "ethaddr"
U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U8500 $setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
U8500 $dhcp
 dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
BOOTP broadcast 1
DHCP client bound to address 192.168.1.159
U8500 $ setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U8500 $ if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-ii7ouu/tmpwoFilL-uImage
tftp 0x00800000 192.168.1.2:tmp/snowball-ii7ouu/tmpwoFilL-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/snowball-ii7ouu/tmpwoFilL-uImage'.
Load address: 0x800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #######################################################
done
Bytes transferred = 4610753 (465ac1 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4610689 Bytes =  4.4 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 50.57 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i#if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-KO4ZbA/zImage
tftp 0x40800000 192.168.1.2:tmp/cubie2-KO4ZbA/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-KO4ZbA/zImage'.
Load address: 0x40800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ####################################################
     2.7 MiB/s
done
Bytes transferred = 4569440 (45b960 hex)
sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x43000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-KO4ZbA/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-KO4ZbA/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-KO4ZbA/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     2.2 MiB/s
done
Bytes transferred = 18209 (4721 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40800000 0x43000000 0x41000000
bootz 0x40800000 0x43000000 0x41000000
Kernel image @ 0x40800000 [ 0x000000 - 0x45b960 ]
## Loading init Ramdisk from Legacy Image at 43000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 39.91 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> version
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.164
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=>if test -n ${netargs}; then run netargs; fi
 if test -n ${netargs}; then run netargs; fi
=> tftp 0x10800000 192.168.1.2:tmp/wand-solo-sCiqDE/zImage
tftp 0x10800000 192.168.1.2:tmp/wand-solo-sCiqDE/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-sCiqDE/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ####################################################
     1.5 MiB/s
done
Bytes transferred = 4569440 (45b960 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-solo-sCiqDE/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-solo-sCiqDE/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-sCiqDE/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 26637 (680d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100980c
Starting kernel ...
Ôú·ðay8ò^œ²3fMs'=ØôØ€*Ê€$Q¥ù°Upt6Bfz@Vàk??TÖrx+_ ïøá2QTgÔÖãûû«ßnà²Ôgkt2eHwXhV{V+_BÖg?P2|XÖÖö{kßs@PÖgpVTxkvV+_nü4â:j<20pT!d^t}vöÙ<?jt6A~>>v(,(h>XPVg?Vmé_7P\ht|Uw<d0Ñp020hz I6~><RöÔMz7|r.ËBcVg?V?V?PP÷²WýþÔ§ÙûÐ»ÉV#svV;G'Ùóòøñwy@#Tg?TZR£o[WtV7XûÔ¿À?VTs{f;O'XwrùVwnWTg?ÐZÓÔwtW]7PV?@?P×óûÖ»ÇVk{7yVwfa`ÐVgwtW}~P'Y{PMÖù÷{V:W'Ð÷rVc3z`,ÐgxkW}×ü·ØûÐ»ÍPTszn;WwWussTqw>r=0üŽ4~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.36 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: OFFLINE: last 80 lines of boot log:
    ----------------------------------------------------
Connected to wand-quad console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(wand-quad console)> hardreset
(user:khilman) Reboot wand-quad
Reboot: wand-quad ; phidget 2 3 :  off, sleep, on
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
In:    serial
  0 
=> ~$off
# PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE')
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: OFFLINE
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> version
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.156
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x10800000 192.168.1.2:tmp/wand-dual-QqQiXt/zImage
tftp 0x10800000 192.168.1.2:tmp/wand-dual-QqQiXt/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-QqQiXt/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ####################################################
     1.5 MiB/s
done
Bytes transferred = 4569440 (45b960 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-dual-QqQiXt/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-dual-QqQiXt/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-QqQiXt/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.3 MiB/s
done
Bytes transferred = 26637 (680d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100980c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.56 seconds.
# PYBOOT: Result: FAIL