Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-rc5-887-g771ca2a/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:46.87 bbb arm-omap2plus_defconfig : FAILED 1:54.90 bbb arm-multi_v7_defconfig : FAILED 1:54.81 bbb arm-multi_v7_nosmp_defconfig : FAILED 3:06.66 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.43 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:47.54 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:54.33 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:13.02 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.23 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.56 cosmic arm-multi_v7_defconfig : FAILED 2:09.83 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:17.42 dalmore arm-tegra_defconfig : FAILED 1:52.81 dalmore arm-multi_v7_defconfig : FAILED 1:57.34 dalmore arm-multi_lpae_defconfig : FAILED 2:02.83 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.68 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.57 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.14 omap5uevm arm-multi_lpae_defconfig : FAILED 2:13.04 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:13.57 seaboard arm-tegra_defconfig : FAILED 1:50.64 seaboard arm-multi_v7_defconfig : FAILED 1:54.50 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:59.45 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.57 snowball arm-u8500_defconfig : FAILED 1:55.51 snowball arm-multi_v7_defconfig : FAILED 2:17.04 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:07.91 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.02

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:16.71 arndale arm-exynos_defconfig : passed 1:31.20 arndale arm-multi_v7_defconfig : passed 1:17.69 arndale arm-multi_lpae_defconfig : passed 1:32.41 capri arm-bcm_defconfig : passed 0:47.71 capri arm-multi_v7_defconfig : passed 0:58.52 capri arm-multi_v7_nosmp_defconfig : warnings 0:54.51 chitra powerpc-ppc64_defconfig : passed 2:13.16 colombus arm-sunxi_defconfig : passed 2:26.65 colombus arm-multi_v7_defconfig : passed 2:56.20 colombus arm-multi_lpae_defconfig : passed 2:27.66 cubie arm-sunxi_defconfig : passed 0:54.83 cubie arm-multi_v7_defconfig : passed 0:53.71 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.03 cubie2 arm-sunxi_defconfig : passed 0:54.26 cubie2 arm-multi_v7_defconfig : passed 0:59.69 cubie2 arm-multi_lpae_defconfig : passed 1:00.52 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:49.95 cubox arm-multi_v7_defconfig : passed 1:10.78 cubox arm-mvebu_v7_defconfig : passed 1:10.67 cubox arm-multi_v7_nosmp_defconfig : passed 1:41.22 hummingboard arm-imx_v6_v7_defconfig : passed 1:37.68 hummingboard arm-multi_v7_defconfig : passed 1:38.30 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:09.23 jetsontk1 arm-tegra_defconfig : warnings 1:32.20 jetsontk1 arm-multi_v7_defconfig : warnings 1:36.34 jetsontk1 arm-multi_lpae_defconfig : warnings 1:54.14 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.05 omap5uevm arm-omap2plus_defconfig : passed 1:04.26 pandaes arm-omap2plus_defconfig : warnings 1:38.78 pandaes arm-multi_v7_defconfig : passed 1:43.89 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:55.10 pi arm-exynos_defconfig : passed 2:09.38 pi arm-multi_v7_defconfig : passed 2:25.04 pi arm-multi_lpae_defconfig : passed 2:48.61 pi arm-multi_v7_nosmp_defconfig : warnings 2:07.62 pit arm-exynos_defconfig : passed 2:10.61 pit arm-multi_v7_defconfig : passed 2:17.91 pit arm-multi_lpae_defconfig : passed 2:24.15 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.56 seattle arm64-defconfig : warnings 2:20.10 snow arm-exynos_defconfig : passed 2:06.53 snow arm-multi_v7_defconfig : passed 2:26.94 snow arm-multi_lpae_defconfig : passed 2:01.23 trimslice arm-tegra_defconfig : warnings 1:31.32 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:36.92 wandboard arm-multi_v7_defconfig : passed 1:09.02 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:15.38

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:13.33 beaver arm-multi_v7_defconfig : OFFLINE 2:18.32 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.48 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.17 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:20.30 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:31.10 parallella arm-multi_v7_defconfig : OFFLINE 2:19.73 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:27.84 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.38 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:01.00 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:52.73 sama5 arm-sama5_defconfig : OFFLINE 2:21.57 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:37.50 socfpga arm-socfpga_defconfig : OFFLINE 2:24.14 socfpga arm-multi_v7_defconfig : OFFLINE 2:32.74 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.20 trimslice arm-multi_v7_defconfig : OFFLINE 2:31.16

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.013899] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.019325] hctosys: unable to open rtc device (rtc0) [ 2.028203] MAIN_DC: disabling [ 2.029803] hdmi-en: disabling [ 2.033196] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 2.043401] [c10b8740] *pgd=4100041e(bad) [ 0.000000] Linux version 4.6.0-rc5-00887-g771ca2a (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Mon May 9 08:51:21 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 2.065448] Modules linked in: [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c110019c, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-00887-g771ca2a #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e70c>] (unwind_backtrace) from [<c030b298>] (show_stack+0x10/0x14) [ 0.000000] [<c030b298>] (show_stack) from [<c0336078>] (__warn+0xe4/0xfc) [ 0.000000] [<c0336078>] (__warn) from [<c03360c8>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c03360c8>] (warn_slowpath_fmt) from [<c0f04040>] (arm_dt_init_cpu_maps+0xf8/0x134) [ 0.000000] [<c0f04040>] (arm_dt_init_cpu_maps) from [<c0f03368>] (setup_arch+0x780/0x8b8)

[PYBOOT] [arndale 02:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:45]: got exception: timeout ~$off

[PYBOOT] [arndale 02:46]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.650037] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.660118] ledtrig-cpu: registered to indicate activity on CPUs [ 1.667224] usbcore: registered new interface driver usbhid [ 1.673153] usbhid: USB HID core driver [ 1.685492] NET: Registered protocol family 10 [ 1.692060] sit: IPv6 over IPv4 tunneling driver [ 1.698222] NET: Registered protocol family 17 [ 1.702985] can: controller area network core (rev 20120528 abi 9) [ 1.709624] NET: Registered protocol family 29 [ 1.714346] can: raw protocol (rev 20120528) [ 1.718866] can: broadcast manager protocol (rev 20120528 t) [ 1.724861] can: netlink gateway (rev 20130117) max_hops=1 [ 1.731575] Key type dns_resolver registered [ 1.736474] omap_voltage_late_init: Voltage driver support not added [ 1.744811] ThumbEE CPU extension supported. [ 1.749439] Registering SWP/SWPB emulation handler [ 1.791455] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.797971] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.805764] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.814466] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.822394] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830256] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.838095] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.845450] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.854178] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.862105] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.871834] mmc1: new high speed MMC card at address 0001 [ 1.879102] hctosys: unable to open rtc device (rtc0) [ 1.892104] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.898100] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.905107] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.913975] mmcblk1: p1 p2 [ 1.919697] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.315711] sdhci: Secure Digital Host Controller Interface driver [ 1.322227] sdhci: Copyright(c) Pierre Ossman [ 1.328049] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.391300] Synopsys Designware Multimedia Card Interface Driver [ 1.398674] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.407863] ledtrig-cpu: registered to indicate activity on CPUs [ 1.414605] usbcore: registered new interface driver usbhid [ 1.420480] usbhid: USB HID core driver [ 1.430178] NET: Registered protocol family 10 [ 1.436664] sit: IPv6 over IPv4 tunneling driver [ 1.442532] NET: Registered protocol family 17 [ 1.447269] can: controller area network core (rev 20120528 abi 9) [ 1.453865] NET: Registered protocol family 29 [ 1.458558] can: raw protocol (rev 20120528) [ 1.463068] can: broadcast manager protocol (rev 20120528 t) [ 1.469044] can: netlink gateway (rev 20130117) max_hops=1 [ 1.475586] Key type dns_resolver registered [ 1.480392] omap_voltage_late_init: Voltage driver support not added [ 1.488190] ThumbEE CPU extension supported. [ 1.500793] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.508347] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.516398] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.524135] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.531819] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.539488] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.546770] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.554475] hctosys: unable to open rtc device (rtc0) [ 1.565308] Waiting for root device /dev/mmcblk0p2... [ 1.600557] mmc1: new high speed MMC card at address 0001 [ 1.607025] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.612095] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.618578] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.627022] mmcblk1: p1 p2

[PYBOOT] [bbb 03:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 03:04]: got exception: timeout ~$off

[PYBOOT] [bbb 03:05]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.045090] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.051214] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.057549] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.064433] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.074040] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.083550] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.090577] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.133907] ledtrig-cpu: registered to indicate activity on CPUs [ 2.142617] oprofile: using arm/armv7 [ 2.147736] Initializing XFRM netlink socket [ 2.152820] NET: Registered protocol family 10 [ 2.163572] sit: IPv6 over IPv4 tunneling driver [ 2.172281] NET: Registered protocol family 17 [ 2.177220] NET: Registered protocol family 15 [ 2.182476] Key type dns_resolver registered [ 2.187345] omap_voltage_late_init: Voltage driver support not added [ 2.194095] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.202573] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.212849] ThumbEE CPU extension supported. [ 2.217512] Registering SWP/SWPB emulation handler [ 2.222551] SmartReflex Class3 initialized [ 2.291739] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.299029] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.309533] mmc1: new high speed MMC card at address 0001 [ 2.321604] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.329870] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.337624] hctosys: unable to open rtc device (rtc0) [ 2.342954] sr_init: No PMIC hook to init smartreflex [ 2.348756] sr_init: platform driver register failed for SR [ 2.388814] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.396785] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.411003] mmcblk1: p1 p2 [ 2.428229] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.173473] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.180553] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.205839] rtc-ds1307 2-006f: SET TIME! [ 2.211576] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.218330] rtc-ds1307 2-006f: 64 bytes nvram [ 2.222939] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.231181] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.236969] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.245208] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.254372] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.261245] hub 1-0:1.0: USB hub found [ 2.265200] hub 1-0:1.0: 1 port detected [ 2.269600] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.275364] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.283478] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.292496] hub 2-0:1.0: USB hub found [ 2.296461] hub 2-0:1.0: 1 port detected [ 2.302536] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.336447] vdd_3v3: supplied by regen1 [ 2.374674] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.392321] aic_dvdd_fixed: disabling [ 2.397062] Waiting for root device /dev/mmcblk0p1... [ 2.417401] mmc1: new high speed MMC card at address 0001 [ 2.423370] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.428253] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.434590] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.441468] mmcblk1: p1 [ 2.575336] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.610401] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.635586] hub 2-1:1.0: USB hub found [ 2.639566] hub 2-1:1.0: 4 ports detected [ 2.731608] hub 1-1:1.0: USB hub found [ 2.735596] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:52]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:53]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.167684] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.174761] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.200846] rtc-ds1307 2-006f: SET TIME! [ 2.206573] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.213327] rtc-ds1307 2-006f: 64 bytes nvram [ 2.217938] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.226166] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.231950] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.240187] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.249356] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.256241] hub 1-0:1.0: USB hub found [ 2.260191] hub 1-0:1.0: 1 port detected [ 2.264597] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.270372] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.278471] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.287489] hub 2-0:1.0: USB hub found [ 2.291462] hub 2-0:1.0: 1 port detected [ 2.297568] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.331469] vdd_3v3: supplied by regen1 [ 2.369611] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.387676] aic_dvdd_fixed: disabling [ 2.392404] Waiting for root device /dev/mmcblk0p1... [ 2.419569] mmc1: new high speed MMC card at address 0001 [ 2.425549] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.430445] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.436793] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.443690] mmcblk1: p1 [ 2.570347] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.605374] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.630581] hub 2-1:1.0: USB hub found [ 2.634562] hub 2-1:1.0: 4 ports detected [ 2.726606] hub 1-1:1.0: USB hub found [ 2.730592] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.997923] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.004971] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.030221] rtc-ds1307 2-006f: SET TIME! [ 2.035846] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.042559] rtc-ds1307 2-006f: 64 bytes nvram [ 2.047144] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.054526] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.060298] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.068495] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.077633] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.084363] hub 1-0:1.0: USB hub found [ 2.088315] hub 1-0:1.0: 1 port detected [ 2.092622] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.098385] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.106459] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.115325] hub 2-0:1.0: USB hub found [ 2.119274] hub 2-0:1.0: 1 port detected [ 2.124522] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.160436] vdd_3v3: supplied by regen1 [ 2.191540] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.204507] aic_dvdd_fixed: disabling [ 2.209878] Waiting for root device /dev/mmcblk0p1... [ 2.256755] mmc1: new high speed MMC card at address 0001 [ 2.262627] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.267453] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.273753] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.280539] mmcblk1: p1 [ 2.399755] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.429774] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.458558] hub 2-1:1.0: USB hub found [ 2.462536] hub 2-1:1.0: 4 ports detected [ 2.554560] hub 1-1:1.0: USB hub found [ 2.558530] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:11]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:12]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.638896] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.645766] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.656165] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.661038] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.667351] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.674200] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.683795] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.693305] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.700367] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.747667] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.753976] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.760857] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.770451] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.779953] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.787001] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.793120] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.799437] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.806286] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.815880] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.825387] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.832428] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.839078] vdd_3v3: supplied by regen1 [ 2.877788] hctosys: unable to open rtc device (rtc0) [ 2.883095] sr_init: No PMIC hook to init smartreflex [ 2.888620] sr_init: platform driver register failed for SR [ 2.929409] mmc1: new high speed MMC card at address 0001 [ 2.937261] aic_dvdd_fixed: disabling [ 2.937314] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.938016] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.938762] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.948268] mmcblk1: p1 [ 2.961375] ldousb: disabling [ 2.967410] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.432708] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.447004] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 84.840126] random: dd urandom read with 54 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.218832] eth0: device MAC address c2:d8:3f:33:28:7d [ 89.373654] RX IPC Checksum Offload disabled [ 89.378266] No MAC Management Counters available [ 89.384027] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/c2:d8:3f:33:28:7d Sending on LPF/eth0/c2:d8:3f:33:28:7d Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.456099] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.530337] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.540661] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.614847] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.625171] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.699401] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.709751] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.784036] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.794355] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.868587] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.878911] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.953093] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.963421] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.037681] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.048141] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.122435] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.132755] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.206987] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.217327] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.291663] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.301984] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.376215] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.386537] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.460771] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.471091] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.545265] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.555585] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.629809] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.640129] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.714313] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.724631] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.798852] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.809177] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.089774] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.163757] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.173832] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.247815] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.257893] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.331877] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.341954] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.415944] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.426023] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.500014] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.510090] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.584083] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.594153] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.668145] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.678216] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.752205] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.762275] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.836263] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.846336] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.920327] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.930403] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.004390] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.014464] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.088445] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.098523] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.172505] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.182583] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.256562] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.266654] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.340646] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.350719] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.424701] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.434779] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:08]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.873777] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.947692] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.957750] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.031663] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.041714] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.115627] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.125679] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.199595] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.209654] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.283565] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.293636] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.367551] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.377608] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.451539] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.461600] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.535513] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.545558] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.619469] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.629522] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.703431] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.713476] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.787384] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.797433] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.871338] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.881389] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.955304] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.965363] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.039278] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.049335] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.123251] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.133308] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.207220] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.217274] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:15]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:16]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.701940] Key type dns_resolver registered [ 2.708383] ThumbEE CPU extension supported. [ 2.712808] Registering SWP/SWPB emulation handler [ 2.762509] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.768702] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.777292] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.791429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.798271] [drm] No driver support for vblank timestamp query. [ 2.810212] mmc1: new high speed MMC card at address 0001 [ 2.818079] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.824813] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.833353] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.841962] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.853648] mmcblk1: p1 [ 2.978152] Console: switching to colour frame buffer device 240x75 [ 3.065329] drm drm: fb0: frame buffer device [ 3.081504] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.091632] usb2_vbus: supplied by vdd-sys-5v0 [ 3.102398] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.107994] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.116947] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.131518] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.141936] hub 1-0:1.0: USB hub found [ 3.145944] hub 1-0:1.0: 1 port detected [ 3.157325] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.172430] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.234354] dvdd_ts: disabling [ 3.237569] usb1_vbus: disabling [ 3.240828] vdd_cam_1v8_reg: disabling [ 3.248482] Waiting for root device /dev/mmcblk0p1... [ 3.456520] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.424153] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.311433] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:01]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:02]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.691723] Key type dns_resolver registered [ 2.698191] ThumbEE CPU extension supported. [ 2.702619] Registering SWP/SWPB emulation handler [ 2.743154] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.750277] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.760576] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.777403] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.784153] [drm] No driver support for vblank timestamp query. [ 2.795597] mmc1: new high speed MMC card at address 0001 [ 2.805630] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.813636] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.822960] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.832468] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.844445] mmcblk1: p1 [ 2.964044] Console: switching to colour frame buffer device 240x75 [ 3.051410] drm drm: fb0: frame buffer device [ 3.073801] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.084121] usb2_vbus: supplied by vdd-sys-5v0 [ 3.095821] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.101477] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.110191] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.123832] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.134377] hub 1-0:1.0: USB hub found [ 3.138371] hub 1-0:1.0: 1 port detected [ 3.149178] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.163637] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.225583] dvdd_ts: disabling [ 3.228801] usb1_vbus: disabling [ 3.232063] vdd_cam_1v8_reg: disabling [ 3.239508] Waiting for root device /dev/mmcblk0p1... [ 3.453859] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.432051] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.345268] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.211590] can: broadcast manager protocol (rev 20120528 t) [ 2.217347] can: netlink gateway (rev 20130117) max_hops=1 [ 2.224026] Key type dns_resolver registered [ 2.229113] ThumbEE CPU extension supported. [ 2.261019] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.265950] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.276043] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.299232] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.305914] [drm] No driver support for vblank timestamp query. [ 2.470420] Console: switching to colour frame buffer device 240x75 [ 2.558504] drm drm: fb0: frame buffer device [ 2.563235] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.571263] usb2_vbus: supplied by vdd-sys-5v0 [ 2.578867] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.584471] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.592361] mmc1: new high speed MMC card at address 0001 [ 2.599023] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.604058] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.610781] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.616867] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.623279] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.630106] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.637202] mmcblk1: p1 [ 2.642080] hub 1-0:1.0: USB hub found [ 2.648975] hub 1-0:1.0: 1 port detected [ 2.658559] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.669897] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.705527] dvdd_ts: disabling [ 2.708614] usb1_vbus: disabling [ 2.711909] vdd_cam_1v8_reg: disabling [ 2.717325] Waiting for root device /dev/mmcblk0p1... [ 2.964639] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.916870] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.848167] Bluetooth: RFCOMM ver 1.11 [ 2.852115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.857511] Bluetooth: BNEP socket layer initialized [ 2.862603] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.868600] Bluetooth: HIDP socket layer initialized [ 2.875545] Key type dns_resolver registered [ 2.885085] Registering SWP/SWPB emulation handler [ 2.913486] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.918722] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.925803] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.947833] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.954790] [drm] No driver support for vblank timestamp query. [ 3.131467] Console: switching to colour frame buffer device 240x75 [ 3.218483] drm drm: fb0: frame buffer device [ 3.250152] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.257349] usb2_vbus: supplied by vdd-sys-5v0 [ 3.265575] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.271387] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.280486] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.300061] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.314131] hub 1-0:1.0: USB hub found [ 3.318178] hub 1-0:1.0: 1 port detected [ 3.332551] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.348852] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.445373] dvdd_ts: disabling [ 3.448478] usb1_vbus: disabling [ 3.451908] vdd_cam_1v8_reg: disabling [ 3.456589] ALSA device list: [ 3.459579] #0: NVIDIA Tegra Dalmore [ 3.465596] Waiting for root device /dev/mmcblk0p1... [ 3.640170] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.663768] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.531453] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.652561] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661472] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.692604] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.693591] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.701708] usbcore: registered new interface driver usbhid [ 1.703739] usbhid: USB HID core driver [ 1.712005] NET: Registered protocol family 10 [ 1.712654] sit: IPv6 over IPv4 tunneling driver [ 1.717744] NET: Registered protocol family 17 [ 1.720990] NET: Registered protocol family 15 [ 1.725473] Key type dns_resolver registered [ 1.729789] Registering SWP/SWPB emulation handler [ 1.735635] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740194] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.761324] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.765600] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.768122] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770338] max98090 1-0010: use default 2.8v micbias [ 1.785106] mmc1: new DDR MMC card at address 0001 [ 1.790690] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.790741] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.790973] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.791192] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.791419] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.800433] mmcblk1: p1 p2 [ 1.823621] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.860779] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.879884] VDD10_HDMI_1.0V: disabling [ 1.880575] vdd_g3d: disabling [ 1.881651] BUCK8_2.8V: disabling [ 1.885652] ALSA device list: [ 1.887272] #0: Odroid-U3 [ 1.891001] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.745057] fe00: ee61d9d0 00000001 00000000 c2009f48 ee69e810 00000000 ee69fc00 ee69f88c [ 2.753628] fe20: ee69fc40 ee0ccb80 ee69fa00 c05c539c ee69f880 c14409e8 024080c0 c0f12540 [ 2.762190] fe40: c1342824 c134285c ee17fa10 ee17fa10 ee69f850 ee17fa10 c13c9f74 ee605100 [ 2.770753] fe60: 0000000d ee00b000 ee2f1800 c05c54f0 ee17fa10 ee69f810 c1454dd8 c079d2b4 [ 2.779317] fe80: ee17fa10 c1454dd0 c1454dd8 c077fa80 00000000 ee5efec8 c077fd6c 00000001 [ 2.787878] fea0: ee605100 00000000 ee00b000 c077e024 ee03fb70 ee625438 ee17fa10 ee17fa44 [ 2.796440] fec0: c13a5eb8 c077f91c ee17fa10 00000001 2ddcf000 ee17fa10 ee17fa10 c13a5eb8 [ 2.805003] fee0: c13a5cd8 c077ee00 ee17fa10 c13a5cb8 c13a5cb8 c077f28c c13a5cec ee2f1800 [ 2.813560] ff00: ee00b000 00000000 ee605100 c03564b4 c1302100 ee00b018 ee00b000 ee2f1818 [ 2.822109] ff20: 00000088 c1302100 ee00b018 ee5ee000 ee00b000 c0357120 ee36f000 ee2f1800 [ 2.830673] ff40: c03570e8 00000000 ee36f000 ee2f1800 c03570e8 00000000 00000000 00000000 [ 2.839235] ff60: 00000000 c035bedc 00000001 00000000 24a25421 ee2f1800 00000000 00000000 [ 2.847793] ff80: ee5eff80 ee5eff80 00000001 00010001 ee5eff90 ee5eff90 ee36f000 ee36f000 [ 2.856357] ffa0: c035be00 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.864922] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.873486] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 e18aca42 6405b0c2 [ 2.882045] [<c035c304>] (kthread_data) from [<c0357704>] (wq_worker_sleeping+0x8/0xd0) [ 2.890433] [<c0357704>] (wq_worker_sleeping) from [<c0b6c8dc>] (__schedule+0x380/0x590) [ 2.898902] [<c0b6c8dc>] (__schedule) from [<c0b6cb30>] (schedule+0x44/0x9c) [ 2.906285] [<c0b6cb30>] (schedule) from [<c034360c>] (do_exit+0x678/0xa18) [ 2.913573] [<c034360c>] (do_exit) from [<c030bd7c>] (die+0x410/0x474) [ 2.920406] [<c030bd7c>] (die) from [<c031cb9c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.928695] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 2.937984] [<c0317c10>] (do_page_fault) from [<c030137c>] (do_PrefetchAbort+0x38/0x9c) [ 2.946362] [<c030137c>] (do_PrefetchAbort) from [<c030c58c>] (__pabt_svc+0x4c/0x80) [ 2.954464] Exception stack(0xee5efd88 to 0xee5efdd0) [ 2.959753] fd80: ee374810 00000005 0000006d c05d1c08 00000005 ee35b000 [ 2.968324] fda0: 00000005 eefe688c 0000000e ee69fc40 ee69e810 00000000 ed825d90 ee5efdd8 [ 2.976882] fdc0: c05d1c14 0000006c 20000033 ffffffff [ 2.982168] [<c030c58c>] (__pabt_svc) from [<0000006c>] (0x6c) [ 2.988270] Code: ebff888b e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.994647] ---[ end trace 817a1d2c5c1848b9 ]--- [ 2.999479] Fixing recursive fault but reboot is needed!

[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:12]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.020240] smsc95xx v1.0.4 [ 2.051303] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.059212] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 23.064446] INFO: rcu_sched detected stalls on CPUs/tasks: [ 23.070190] (detected by 1, t=4202 jiffies, g=-270, c=-271, q=16) [ 23.076664] All QSes seen, last rcu_sched kthread activity 4199 (-55388--59587), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 23.088321] swapper/1 R running 0 0 1 0x00000000 [ 23.095002] [<c031031c>] (unwind_backtrace) from [<c030b968>] (show_stack+0x10/0x14) [ 23.103107] [<c030b968>] (show_stack) from [<c03916e4>] (rcu_check_callbacks+0x798/0x7a4) [ 23.111673] [<c03916e4>] (rcu_check_callbacks) from [<c0393d54>] (update_process_times+0x3c/0x64) [ 23.120965] [<c0393d54>] (update_process_times) from [<c03a4bc0>] (tick_sched_timer+0x48/0x8c) [ 23.129987] [<c03a4bc0>] (tick_sched_timer) from [<c0394ab0>] (__hrtimer_run_queues+0x128/0x1bc) [ 23.139196] [<c0394ab0>] (__hrtimer_run_queues) from [<c0394d00>] (hrtimer_interrupt+0xa8/0x208) [ 23.148399] [<c0394d00>] (hrtimer_interrupt) from [<c09f6310>] (arch_timer_handler_virt+0x28/0x30) [ 23.157790] [<c09f6310>] (arch_timer_handler_virt) from [<c0387af0>] (handle_percpu_devid_irq+0x6c/0x84) [ 23.167712] [<c0387af0>] (handle_percpu_devid_irq) from [<c0383804>] (generic_handle_irq+0x24/0x34) [ 23.177186] [<c0383804>] (generic_handle_irq) from [<c0383ab4>] (__handle_domain_irq+0x5c/0xb4) [ 23.186290] [<c0383ab4>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 23.195028] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 23.202860] Exception stack(0xee091f88 to 0xee091fd0) [ 23.208145] 1f80: 00000001 00000000 ea000013 f0880000 ee090000 c13024a4 [ 23.216697] 1fa0: 00000000 00000000 c12085c0 c1302504 c1412f28 c130250c 60000013 ee091fd8 [ 23.225251] 1fc0: c032af64 c0308740 a0000013 ffffffff [ 23.230540] [<c030c494>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 23.238289] [<c0308740>] (arch_cpu_idle) from [<c0377f80>] (cpu_startup_entry+0x1bc/0x218) [ 23.246947] [<c0377f80>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 23.254236] rcu_sched kthread starved for 4199 jiffies! g4294967026 c4294967025 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x100 [ 23.265352] rcu_sched W c0b6c738 0 7 2 0x00000000 [ 23.272018] [<c0b6c738>] (__schedule) from [<c0b6cb30>] (schedule+0x44/0x9c) [ 23.279404] [<c0b6cb30>] (schedule) from [<c0b6f4ec>] (schedule_timeout+0x124/0x1b0) [ 23.287513] [<c0b6f4ec>] (schedule_timeout) from [<c03906c0>] (rcu_gp_kthread+0x3f0/0x8c4) [ 23.296166] [<c03906c0>] (rcu_gp_kthread) from [<c035bedc>] (kthread+0xdc/0xf4) [ 23.303818] [<c035bedc>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c)

[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.991021] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 1.997308] task: ee06c000 ti: ee070000 task.ti: ee070000 [ 2.002959] PC is at crc32_be+0xd0/0x184 [ 2.007063] LR is at 0x8d92f046 [ 2.010344] pc : [<c0560740>] lr : [<8d92f046>] psr: 20000013 [ 2.010344] sp : ee071eb8 ip : c0b20680 fp : 00001c10 [ 2.022374] r10: 00001010 r9 : 00001810 r8 : 00001410 [ 2.027842] r7 : ac3b4613 r6 : d24f3cfb r5 : c200034c r4 : c0b20670 [ 2.034675] r3 : 02e9b706 r2 : 765f46d1 r1 : c200dffc r0 : c0b209fc [ 2.041510] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2.048971] Control: 10c53c7d Table: 80204059 DAC: 00000051 [ 2.054983] Process swapper (pid: 1, stack limit = 0xee070218) [ 2.061088] Stack: (0xee071eb8 to 0xee072000) [ 2.065644] 1ea0: c11343d8 c1fffffc [ 2.074212] 1ec0: 00000000 0000e000 00000000 0000e000 c114195c ee590a00 c0f40fa8 00000000 [ 2.082767] 1ee0: c0fe4d9c 00000008 00000000 c0f40fd4 c10063a0 c10063a0 ee590a00 c0301c34 [ 2.091334] 1f00: c0b06f3c c1128740 c1036c20 00000000 00000000 c042d974 c0b0a680 ee0be580 [ 2.099897] 1f20: c0e87c0c c0b1c12c 000000fc c034d344 c0d47c78 c0e8685c 00000000 00000007 [ 2.108463] 1f40: 00000007 c0d5b744 00000000 c1103000 c1103000 c1103000 c1103000 000000fc [ 2.117023] 1f60: c0f88834 c0f88838 c0fe4d9c c0f00d7c 00000007 00000007 00000000 c0f005ac [ 2.125589] 1f80: 00000000 00000000 c0a8eae8 00000000 00000000 00000000 00000000 00000000 [ 2.134146] 1fa0: 00000000 c0a8eaf0 00000000 c0307998 00000000 00000000 00000000 00000000 [ 2.142695] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.151264] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 08b8c1e0 2d9900a1 [ 2.159824] [<c0560740>] (crc32_be) from [<c0f40fd4>] (of_fdt_raw_init+0x2c/0x74) [ 2.167666] [<c0f40fd4>] (of_fdt_raw_init) from [<c0301c34>] (do_one_initcall+0x90/0x1d4) [ 2.176223] [<c0301c34>] (do_one_initcall) from [<c0f00d7c>] (kernel_init_freeable+0x134/0x1c4) [ 2.185343] [<c0f00d7c>] (kernel_init_freeable) from [<c0a8eaf0>] (kernel_init+0x8/0x110) [ 2.193909] [<c0a8eaf0>] (kernel_init) from [<c0307998>] (ret_from_fork+0x14/0x3c) [ 2.201841] Code: e0233006 e5922410 e0840100 e023300e (e79cc009) [ 2.208233] ---[ end trace cb88537fdc8fa202 ]--- [ 2.213076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.213076] [ 2.222643] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.222643]

[PYBOOT] [omap5uevm 01:11]: got exception: panic ~$off

[PYBOOT] [omap5uevm 01:13]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.836291] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.850823] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.857334] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.862796] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.870782] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.889680] mmc2: switch to bus width 8 failed [ 1.894447] mmc2: switch to bus width 4 failed [ 1.898931] mmc2: new high speed MMC card at address 0001 [ 1.905051] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.909942] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.915859] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.923090] hub 3-0:1.0: USB hub found [ 1.927049] hub 3-0:1.0: 1 port detected [ 1.927081] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.937785] mmcblk2: p3 [ 1.944614] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.951294] [drm] No driver support for vblank timestamp query. [ 1.974673] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.988546] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.997166] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.004751] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.024544] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.031600] mmc0: new SDIO card at address 0001 [ 2.043301] Console: switching to colour frame buffer device 170x48 [ 2.093564] drm drm: fb0: frame buffer device [ 2.108740] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.115836] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.123081] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.138741] vdd_1v5: disabling [ 2.141800] vdd_1v2: disabling [ 2.811845] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.823253] Waiting for root device /dev/mmcblk0p3... [ 58.513761] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.792674] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.799002] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.808913] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.815366] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.820781] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.828535] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.844131] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.850742] hub 3-0:1.0: USB hub found [ 1.854559] hub 3-0:1.0: 1 port detected [ 1.859613] mmc2: switch to bus width 8 failed [ 1.878698] mmc2: switch to bus width 4 failed [ 1.883175] mmc2: new high speed MMC card at address 0001 [ 1.888947] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.893730] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.899783] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.907061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.913685] [drm] No driver support for vblank timestamp query. [ 1.921003] mmcblk2: p3 [ 1.948380] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.955984] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.959252] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.966282] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.989708] Console: switching to colour frame buffer device 170x48 [ 2.031691] drm drm: fb0: frame buffer device [ 2.036177] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.042672] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.049586] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.061498] vdd_1v5: disabling [ 2.064580] vdd_1v2: disabling [ 2.073583] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.082416] mmc0: new SDIO card at address 0001 [ 2.757360] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.768235] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.840364] Bluetooth: RFCOMM ver 1.11 [ 1.844172] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.849504] Bluetooth: BNEP socket layer initialized [ 1.854492] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.860437] Bluetooth: HIDP socket layer initialized [ 1.866027] Key type dns_resolver registered [ 1.871543] Registering SWP/SWPB emulation handler [ 1.887218] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.894002] VDDIO_HDMI: supplied by vdd_5v0 [ 1.898459] vdd_sys: supplied by vdd_5v0 [ 1.902540] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.907493] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.914124] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.924645] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.931105] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.937141] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.945135] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.961506] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.969889] hub 3-0:1.0: USB hub found [ 1.973720] hub 3-0:1.0: 1 port detected [ 1.985269] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.991933] [drm] No driver support for vblank timestamp query. [ 2.085006] Console: switching to colour frame buffer device 170x48 [ 2.104773] drm drm: fb0: frame buffer device [ 2.131508] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.138788] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.146825] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.166812] vdd_1v5: disabling [ 2.169865] vdd_1v2: disabling [ 2.173069] ALSA device list: [ 2.176041] #0: NVIDIA Tegra Seaboard [ 2.489386] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.500510] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.182188] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.190538] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.223048] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:11]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.959045] can: controller area network core (rev 20120528 abi 9) [ 1.965301] NET: Registered protocol family 29 [ 1.969757] can: raw protocol (rev 20120528) [ 1.974060] can: broadcast manager protocol (rev 20120528 t) [ 1.979736] can: netlink gateway (rev 20130117) max_hops=1 [ 1.985809] Key type dns_resolver registered [ 1.990325] ThumbEE CPU extension supported. [ 1.994628] Registering SWP/SWPB emulation handler [ 2.005462] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.012359] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.021606] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.028625] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.035614] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.042602] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.056518] db8500-esram12: disabling [ 2.060272] db8500-esram34: disabling [ 2.064331] V-CSI/DSI: disabling [ 2.067596] mmci-reg: disabling [ 2.071350] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.077331] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.083831] Waiting for root device /dev/mmcblk0p4... [ 2.120239] mmc3: new high speed MMC card at address 0001 [ 2.126251] mmcblk3: mmc3:0001 3.53 GiB [ 2.130523] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.136199] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.141815] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.148315] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes

[PYBOOT] [snowball 02:13]: Timed out waiting for "<type 'str'>": Connected.

Disconnected.

[PYBOOT] [snowball 02:14]: got exception: timeout ~$off

[PYBOOT] [snowball 02:16]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.898101] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905639] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911865] usbcore: registered new interface driver usbhid [ 1.917449] usbhid: USB HID core driver [ 1.924835] NET: Registered protocol family 10 [ 1.980163] sit: IPv6 over IPv4 tunneling driver [ 1.985321] NET: Registered protocol family 17 [ 1.989776] can: controller area network core (rev 20120528 abi 9) [ 1.996002] NET: Registered protocol family 29 [ 2.000457] can: raw protocol (rev 20120528) [ 2.004730] can: broadcast manager protocol (rev 20120528 t) [ 2.010406] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016326] Key type dns_resolver registered [ 2.020751] ThumbEE CPU extension supported. [ 2.075103] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089782] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098907] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105895] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112854] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119842] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131561] db8500-esram12: disabling [ 2.179321] db8500-esram34: disabling [ 2.200073] V-CSI/DSI: disabling [ 2.209320] mmci-reg: disabling [ 2.212890] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.218872] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.239044] Waiting for root device /dev/mmcblk0p4... [ 3.033935] mmc3: new high speed MMC card at address 0001 [ 3.049743] mmcblk3: mmc3:0001 3.53 GiB [ 3.053924] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.069427] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.074951] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.090759] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:06]: got exception: timeout ~$off

[PYBOOT] [snowball 02:07]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.563934] iio iio:device1: Full-scale not possible [ 2.570251] iio iio:device1: registered pressure sensor lps001wp [ 2.576934] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.583129] coresight-etb10 801a4000.etb: ETB initialized [ 2.589324] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.595825] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.611206] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.621917] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.631927] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.642639] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.666259] NET: Registered protocol family 10 [ 2.671691] sit: IPv6 over IPv4 tunneling driver [ 2.677246] NET: Registered protocol family 17 [ 2.681793] NET: Registered protocol family 35 [ 2.686309] NET: Registered protocol family 37 [ 2.690887] Registering SWP/SWPB emulation handler [ 2.697418] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.703735] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.710388] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.717437] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-20 12:59:37 UTC (956235577) [ 2.726623] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.733612] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.740600] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.747589] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.761138] db8500-esram12: disabling [ 2.764892] db8500-esram34: disabling [ 2.768798] V-CSI/DSI: disabling [ 2.772094] mmci-reg: disabling [ 2.775390] ALSA device list: [ 2.778350] #0: MOP500-card [ 2.781738] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.787689] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.793884] Waiting for root device /dev/mmcblk0p4...

[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:53]: got exception: timeout ~$off

[PYBOOT] [snowball 01:54]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

INIT: [ 20.086751] mmcblk0: error -110 sending status command, retrying cannot execute "/sbin/getty" [ 20.095246] mmcblk0: error -110 sending status command, retrying [ 20.104003] mmcblk0: error -110 sending status command, aborting [ 20.115138] mmcblk0: error -110 sending status command, retrying [ 20.123574] mmcblk0: error -110 sending status command, retrying [ 20.132046] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.143304] mmcblk0: error -110 sending status command, retrying y" [ 20.152060] mmcblk0: error -110 sending status command, retrying [ 20.160519] mmcblk0: error -110 sending status command, aborting [ 20.171579] mmcblk0: error -110 sending status command, retrying [ 20.180039] mmcblk0: error -110 sending status command, retrying [ 20.188501] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: INIT: Id "S1" respawning too fast: disabled for 5 minutescannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for [ 20.250746] mmcblk0: error -110 sending status command, retrying 5 minutes [ 20.259568] mmcblk0: error -110 sending status command, retrying [ 20.268022] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.303251] mmcblk0: error -110 sending status command, retrying [ 20.311720] mmcblk0: error -110 sending status command, retrying [ 20.320185] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.015288] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:58]: Done.