Automated DT boot report for various ARM defconfigs.
Tree/Branch: next Git describe: next-20140306 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig
Full Report ===========
da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.3 sec
omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.7 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 0.9 sec legacy,3530beagle PASS: 1 min 19.7 sec omap4-panda PASS: 1 min 6.7 sec omap3-overo-tobi PASS: 0 min 23.0 sec am335x-bone PASS: 0 min 28.0 sec omap3-overo-storm-tobi PASS: 0 min 25.4 sec omap5-uevm PASS: 1 min 5.6 sec omap4-panda-es PASS: 1 min 6.7 sec legacy,3730storm PASS: 0 min 23.5 sec legacy,3530overo PASS: 0 min 20.9 sec
multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 48.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.2 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 16.7 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.8 sec sun4i-a10-cubieboard PASS: 0 min 17.0 sec
bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec
mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.2 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 37.1 sec
multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 0 min 59.4 sec ste-snowball FAIL: 0 min 33.5 sec tegra30-beaver PASS: 0 min 19.5 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 50.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda FAIL: 2 min 18.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard PASS: 0 min 18.7 sec bcm28155-ap PASS: 1 min 4.1 sec omap3-overo-tobi PASS: 0 min 21.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.3 sec omap3-overo-storm-tobi PASS: 0 min 24.7 sec omap5-uevm PASS: 1 min 52.4 sec imx6q-wandboard PASS: 0 min 16.2 sec omap4-panda-es PASS: 0 min 50.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 33.2 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec
davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.1 sec
Console logs for failures =========================
multi_v7_defconfig ------------------
ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------
(user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6,
MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version
U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e
U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U8500 $ setenv autoload no; setenv autoboot nodhcp
U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-2zSz_r/tmpPkFIZV-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-2zSz_r/tmpPkFIZV-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-2zSz_r/tmpPkFIZV-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4590977 (460d81 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4590913 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.51 seconds. # PYBOOT: Result: FAIL
omap4-panda: FAIL: last 80 lines of boot log: ---------------------------------------------
[ 1.509765] loop: module loaded [ 1.520233] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.528045] usbcore: registered new interface driver pegasus [ 1.534027] usbcore: registered new interface driver asix [ 1.539733] usbcore: registered new interface driver ax88179_178a [ 1.546173] usbcore: registered new interface driver cdc_ether [ 1.552307] usbcore: registered new interface driver r815x [ 1.558105] usbcore: registered new interface driver smsc75xx [ 1.564178] usbcore: registered new interface driver smsc95xx [ 1.570220] usbcore: registered new interface driver net1080 [ 1.576202] usbcore: registered new interface driver cdc_subset [ 1.582427] usbcore: registered new interface driver zaurus [ 1.588378] usbcore: registered new interface driver cdc_ncm [ 1.594299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.601135] ehci-pci: EHCI PCI platform driver [ 1.605834] ehci-platform: EHCI generic platform driver [ 1.611511] ehci-omap: OMAP-EHCI Host Controller driver [ 1.637329] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.642974] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.651336] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.674835] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.681915] hub 1-0:1.0: USB hub found [ 1.685913] hub 1-0:1.0: 3 ports detected [ 1.690673] ehci-orion: EHCI orion driver [ 1.695098] SPEAr-ehci: EHCI SPEAr driver [ 1.699462] tegra-ehci: Tegra EHCI driver [ 1.704437] usbcore: registered new interface driver usb-storage [ 1.712799] mousedev: PS/2 mouse device common for all mice [ 1.721099] i2c /dev entries driver [ 1.727874] sdhci: Secure Digital Host Controller Interface driver [ 1.734313] sdhci: Copyright(c) Pierre Ossman [ 1.739837] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.746734] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.754425] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.761322] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.769226] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.776153] usbcore: registered new interface driver usbhid [ 1.781982] usbhid: USB HID core driver [ 1.790618] TCP: cubic registered [ 1.794067] NET: Registered protocol family 17 [ 1.798980] Key type dns_resolver registered [ 1.804077] Power Management for TI OMAP4+ devices. [ 1.809204] Power Management for TI OMAP4. [ 1.813507] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.820617] Registering SWP/SWPB emulation handler [ 1.826843] vwl1271: 1800 mV [ 1.834991] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.845092] twl 0-0048: PIH (irq 39) nested IRQs [ 1.851684] twl_rtc rtc.10: Enabling TWL-RTC [ 1.858673] twl_rtc rtc.10: rtc core: registered rtc.10 as rtc0 [ 1.865844] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV [ 1.872039] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.878265] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.884460] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.890197] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.895812] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.900848] VDAC: 1800 mV [ 1.900848] VANA: 2100 mV [ 1.908416] VCXIO: 1800 mV [ 1.908447] VUSB: 3300 mV [ 1.915618] V1V8: 1800 mV [ 1.919311] V2V1: 2100 mV [ 1.927947] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 1.935821] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 1.947082] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 1.954803] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 1.963165] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.005218] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.128143] twl_rtc rtc.10: setting system clock to 2014-03-06 10:34:51 UTC (1394102091) [ 2.136657] spear_cpufreq: Invalid cpufreq_tbl [ 2.161193] hub 1-1:1.0: USB hub found [ 2.165710] hub 1-1:1.0: 5 ports detected [ 4.165588] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.176177] mmc0: new high speed SD card at address aaaa [ 4.182342] mmcblk0: mmc0:aaaa SD02G 1.84 GiB [ 4.188720] mmcblk0: p1 p2 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 138.76 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org