mainline boot: 35 pass, 5 fail (v3.14-10075-g2bf73dd6) - Kernel-build-reports

6 Apr 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.14-10075-g2bf73dd6
Failed boot tests (console logs at the end)
===========================================
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                 bcm28155-ap:     FAIL:    multi_v7_defconfig
              omap4-panda-es:     FAIL:    multi_v7_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
               legacy,3730xm     0 min 51.6 sec:     PASS
            am335x-boneblack     0 min 25.7 sec:     PASS
             omap3-beagle-xm     0 min 58.8 sec:     PASS
           legacy,3530beagle     0 min 40.8 sec:     PASS  (Warnings: 1)
                 omap4-panda     1 min  7.9 sec:     PASS
            omap3-overo-tobi     0 min 26.4 sec:     PASS  (Warnings: 1)
                 am335x-bone     0 min 27.4 sec:     PASS
      omap3-overo-storm-tobi     0 min 24.9 sec:     PASS
                  omap5-uevm     1 min  4.8 sec:     PASS  (Warnings: 1)
              omap4-panda-es     1 min  8.6 sec:     PASS
            legacy,3730storm     0 min 23.2 sec:     PASS
            legacy,3530overo     0 min 24.0 sec:     PASS  (Warnings: 1)
multi_lpae_defconfig
--------------------
                  omap5-uevm     1 min 42.8 sec:     PASS  (Warnings: 1)
       sun7i-a20-cubieboard2     0 min 40.0 sec:     FAIL
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     0 min 18.6 sec:     PASS
  imx6dl-wandboard,wand-solo     0 min 19.1 sec:     PASS
             imx6q-wandboard     0 min 17.2 sec:     PASS
bcm_defconfig
-------------
                 bcm28155-ap     0 min 23.0 sec:     PASS
mvebu_v7_defconfig
------------------
  armada-xp-openblocks-ax3-4     0 min 22.4 sec:     PASS
          armada-370-mirabox     0 min 20.3 sec:     PASS
exynos_defconfig
----------------
          exynos5250-arndale     0 min 29.7 sec:     PASS
multi_v7_defconfig
------------------
    qcom-apq8074-dragonboard     0 min 16.4 sec:     PASS
              tegra30-beaver     0 min 20.1 sec:     PASS
            am335x-boneblack     0 min 24.1 sec:     PASS
             omap3-beagle-xm     0 min 50.2 sec:     PASS
       sun7i-a20-cubieboard2     0 min 40.0 sec:     FAIL
          armada-370-mirabox     0 min 22.3 sec:     PASS
                 omap4-panda     1 min  4.0 sec:     PASS
  armada-xp-openblocks-ax3-4     0 min 25.3 sec:     PASS
        sun4i-a10-cubieboard     0 min 39.8 sec:     FAIL
                 bcm28155-ap     2 min 23.7 sec:     FAIL
            omap3-overo-tobi     0 min 22.2 sec:     PASS  (Warnings: 1)
  imx6dl-wandboard,wand-solo     0 min 18.3 sec:     PASS
                 am335x-bone     0 min 26.7 sec:     PASS
      omap3-overo-storm-tobi     0 min 24.4 sec:     PASS
                  omap5-uevm     1 min 48.6 sec:     PASS  (Warnings: 1)
             imx6q-wandboard     0 min 16.9 sec:     PASS
              omap4-panda-es     2 min 20.7 sec:     FAIL
  imx6dl-wandboard,wand-dual     0 min 17.9 sec:     PASS
davinci_all_defconfig
---------------------
             legacy,dm365evm     0 min 17.4 sec:     PASS
Console logs for failures
=========================
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
sun7i# setenv fdt_high 0xffffffff
setenv fdt_high 0xffffffff
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-Js7spv/zImage
tftp 0x41000000 192.168.1.2:tmp/cubie2-Js7spv/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-Js7spv/zImage'.
Load address: 0x41000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #########################################################
     2.7 MiB/s
done
Bytes transferred = 4650392 (46f598 hex)
sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x43000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-Js7spv/sun7i-a20-cubieboard2.dtb
tftp 0x42000000 192.168.1.2:tmp/cubie2-Js7spv/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-Js7spv/sun7i-a20-cubieboard2.dtb'.
Load address: 0x42000000
Loading: *##
     2.2 MiB/s
done
Bytes transferred = 18361 (47b9 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
sun7i# bootz 0x41000000 0x43000000 0x42000000
bootz 0x41000000 0x43000000 0x42000000
Kernel image @ 0x41000000 [ 0x000000 - 0x46f598 ]
## Loading init Ramdisk from Legacy Image at 43000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 42000000
   Booting using the fdt blob at 0x42000000
   Using Device Tree in place at 42000000, end 420077b8
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 40.02 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
sun7i# setenv fdt_high 0xffffffff
setenv fdt_high 0xffffffff
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-pRvswt/zImage
tftp 0x41000000 192.168.1.2:tmp/cubie2-pRvswt/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-pRvswt/zImage'.
Load address: 0x41000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ########################################################
     2.7 MiB/s
done
Bytes transferred = 4627040 (469a60 hex)
sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x43000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-pRvswt/sun7i-a20-cubieboard2.dtb
tftp 0x42000000 192.168.1.2:tmp/cubie2-pRvswt/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-pRvswt/sun7i-a20-cubieboard2.dtb'.
Load address: 0x42000000
Loading: *##
     2.5 MiB/s
done
Bytes transferred = 18361 (47b9 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
sun7i# bootz 0x41000000 0x43000000 0x42000000
bootz 0x41000000 0x43000000 0x42000000
Kernel image @ 0x41000000 [ 0x000000 - 0x469a60 ]
## Loading init Ramdisk from Legacy Image at 43000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 42000000
   Booting using the fdt blob at 0x42000000
   Using Device Tree in place at 42000000, end 420077b8
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 39.95 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log:
    ------------------------------------------------------
setenv ethaddr 2e:40:70:f0:12:08
sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
sun4i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun4i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun4i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun4i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun4i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.193
sun4i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun4i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun4i# tftp 0x41008000 192.168.1.2:tmp/cubie-hEKtJu/zImage
tftp 0x41008000 192.168.1.2:tmp/cubie-hEKtJu/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'tmp/cubie-hEKtJu/zImage'.
Load address: 0x41008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ########################################################
     2.7 MiB/s
done
Bytes transferred = 4627040 (469a60 hex)
sun4i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x43000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-hEKtJu/sun4i-a10-cubieboard.dtb
tftp 0x42000000 192.168.1.2:tmp/cubie-hEKtJu/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'tmp/cubie-hEKtJu/sun4i-a10-cubieboard.dtb'.
Load address: 0x42000000
Loading: *##
     2.1 MiB/s
done
Bytes transferred = 15184 (3b50 hex)
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
sun4i# bootz 0x41008000 0x43000000 0x42000000
bootz 0x41008000 0x43000000 0x42000000
Kernel image @ 0x41008000 [ 0x000000 - 0x469a60 ]
## Loading init Ramdisk from Legacy Image at 43000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 42000000
   Booting using the fdt blob at 0x42000000
   Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 39.77 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 80 lines of boot log:
    ---------------------------------------------
[    0.610000] ehci-omap: OMAP-EHCI Host Controller driver
[    0.620000] ehci-orion: EHCI orion driver
[    0.620000] SPEAr-ehci: EHCI SPEAr driver
[    0.620000] tegra-ehci: Tegra EHCI driver
[    0.630000] usbcore: registered new interface driver usb-storage
[    0.630000] mousedev: PS/2 mouse device common for all mice
[    0.640000] i2c /dev entries driver
[    0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully
[    0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully
[    0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully
[    0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully
[    0.660000] usbcore: registered new interface driver uvcvideo
[    0.670000] USB Video Class driver (1.1.1)
[    0.670000] gspca_main: v2.14.0 registered
[    0.670000] sdhci: Secure Digital Host Controller Interface driver
[    0.680000] sdhci: Copyright(c) Pierre Ossman
[    0.680000] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.710000] mmc0: no vqmmc regulator found
[    0.710000] mmc0: no vmmc regulator found
[    0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA
[    0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14.
[    0.800000] mmc1: no vqmmc regulator found
[    0.800000] mmc1: no vmmc regulator found
[    0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA
[    0.850000] usbcore: registered new interface driver usbhid
[    0.860000] usbhid: USB HID core driver
[    0.860000] TCP: cubic registered
[    0.860000] NET: Registered protocol family 17
[    0.870000] Key type dns_resolver registered
[    0.870000] ThumbEE CPU extension supported.
[    0.870000] Registering SWP/SWPB emulation handler
[    0.880000] PJ4 iWMMXt coprocessor enabled.
[    0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    0.890000] ALSA device list:
[    0.890000]   No soundcards found.
[    0.890000] Waiting for root device /dev/mmcblk0p8...
[    0.910000] mmc0: BKOPS_EN bit is not set
[    0.920000] mmc0: new high speed MMC card at address 0001
[    0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB 
[    0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB
[    0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB
[    0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB
[    0.940000] Alternate GPT is invalid, using primary GPT.
[    0.950000]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    0.950000]  mmcblk0boot1: unknown partition table
[    0.960000]  mmcblk0boot0: unknown partition table
[    1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[    1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8.
[    1.020000] devtmpfs: mounted
[    1.030000] Freeing unused kernel memory: 544K (c0a65000 - c0aed000)
[    1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    1.060000] Alignment trap: not handling instruction e1923f9f at [<c07cbc7c>]
[    1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    1.060000] Internal error: : 1 [#2] SMP ARM
[    1.060000] Modules linked in:
[    1.060000] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s
[    1.060000]  Not tainted 3.14.0-10075-g2bf73dd6 #1
[    1.060000] task: c09a3734 ti: ea838000 task.ti: 70737573
[    1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    1.060000] LR is at __down_read_trylock+0x14/0x54
[    1.060000] pc : [<c07cbc80>]    lr : [<c027cf3c>]    psr: 40000193
[    1.060000] sp : ea839f38  ip : ea83a020  fp : ea83a020
[    1.060000] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    1.060000] r7 : c09a3734  r6 : 00000005  r5 : 20736eae  r4 : 20736eaa
[    1.060000] r3 : 00000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    1.060000] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    1.060000] Control: 10c5387d  Table: babf404a  DAC: 00000015
[    1.060000] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3)
[    1.060000] Stack: (0xea839f38 to 0x70739573)
[    1.060000] [<c07cbc80>] (_raw_spin_lock_irqsave) from [<c027cf3c>] (__down_read_trylock+0x14/0x54)
[    1.060000] [<c027cf3c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    1.060000] ---[ end trace 0663c82a3a5b17f1 ]---
[    1.060000] Alignment trap: not handling instruction e1923f9f at [<c07cbc7c>]
[    1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae
~$off
# PYBOOT: Exception: userspace: ERROR: Never found root shell
# PYBOOT: Time: 143.65 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 80 lines of boot log:
    ------------------------------------------------
[    1.430511] STMicroelectronics ASC driver initialized
[    1.436645] serial: Freescale lpuart driver
[    1.441253] [drm] Initialized drm 1.1.0 20060810
[    1.450897] loop: module loaded
[    1.460144] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.467956] usbcore: registered new interface driver pegasus
[    1.473968] usbcore: registered new interface driver asix
[    1.479705] usbcore: registered new interface driver ax88179_178a
[    1.486145] usbcore: registered new interface driver cdc_ether
[    1.492309] usbcore: registered new interface driver smsc75xx
[    1.498413] usbcore: registered new interface driver smsc95xx
[    1.504486] usbcore: registered new interface driver net1080
[    1.510498] usbcore: registered new interface driver cdc_subset
[    1.516723] usbcore: registered new interface driver zaurus
[    1.522674] usbcore: registered new interface driver cdc_ncm
[    1.528625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.535491] ehci-pci: EHCI PCI platform driver
[    1.540222] ehci-platform: EHCI generic platform driver
[    1.545898] ehci-omap: OMAP-EHCI Host Controller driver
[    1.571655] ehci-omap 4a064c00.ehci: EHCI Host Controller
[    1.577362] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[    1.585662] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[    1.608673] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[    1.615600] hub 1-0:1.0: USB hub found
[    1.619598] hub 1-0:1.0: 3 ports detected
[    1.624267] ehci-orion: EHCI orion driver
[    1.628662] SPEAr-ehci: EHCI SPEAr driver
[    1.633026] tegra-ehci: Tegra EHCI driver
[    1.637878] usbcore: registered new interface driver usb-storage
[    1.645904] mousedev: PS/2 mouse device common for all mice
[    1.653747] i2c /dev entries driver
[    1.658172] usbcore: registered new interface driver uvcvideo
[    1.664215] USB Video Class driver (1.1.1)
[    1.668518] gspca_main: v2.14.0 registered
[    1.674804] sdhci: Secure Digital Host Controller Interface driver
[    1.681304] sdhci: Copyright(c) Pierre Ossman
[    1.686553] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[    1.692474] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[    1.700134] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[    1.706024] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
[    1.713867] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.720672] usbcore: registered new interface driver usbhid
[    1.726531] usbhid: USB HID core driver
[    1.734313] TCP: cubic registered
[    1.737823] NET: Registered protocol family 17
[    1.742645] Key type dns_resolver registered
[    1.747650] Power Management for TI OMAP4+ devices.
[    1.752807] Power Management for TI OMAP4.
[    1.757110] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[    1.764251] ThumbEE CPU extension supported.
[    1.768981] Registering SWP/SWPB emulation handler
[    1.769012] PJ4 iWMMXt coprocessor enabled.
[    1.779083] vwl1271: 1800 mV 
[    1.785644] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    1.795684] twl 0-0048: PIH (irq 39) nested IRQs
[    1.802032] twl_rtc rtc.11: Enabling TWL-RTC
[    1.808898] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
[    1.815856] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV 
[    1.821960] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV 
[    1.828002] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV 
[    1.834106] VMMC: 1200 <--> 3000 mV at 3000 mV 
[    1.839599] VPP: 1800 <--> 2500 mV at 1900 mV 
[    1.845031] VUSIM: 1200 <--> 2900 mV at 1800 mV 
[    1.850494] VDAC: 1800 mV 
[    1.853759] VANA: 2100 mV 
[    1.857299] VCXIO: 1800 mV 
[    1.860687] VUSB: 3300 mV 
[    1.864227] V1V8: 1800 mV 
[    1.867797] V2V1: 2100 mV 
[    1.875244] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[    1.949157] usb 1-1: new high-speed USB device number 2 using ehci-omap
[    2.119445] hub 1-1:1.0: USB hub found
[    2.123687] hub 1-1:1.0: 5 ports detected
[    2.714080] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[    2.922454] smsc95xx v1.0.4
[    3.066467] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, a2:a4:76:de:7d:ff
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 140.67 seconds.
# PYBOOT: Result: FAIL