Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-139-g729d378/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:49.27 beaver arm-multi_v7_defconfig : FAILED 1:58.55 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.73 omap5uevm arm-omap2plus_defconfig : FAILED 2:11.06 omap5uevm arm-multi_v7_defconfig : FAILED 2:11.05 omap5uevm arm-multi_lpae_defconfig : FAILED 2:11.50 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:59.48 pi arm-multi_lpae_defconfig : FAILED 1:53.10 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice arm-tegra_defconfig : FAILED 2:51.95 trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:21.80 arndale arm-exynos_defconfig : passed 1:30.55 arndale arm-multi_v7_defconfig : passed 1:27.82 arndale arm-multi_lpae_defconfig : passed 1:27.91 bbb arm-omap2plus_defconfig : passed 1:39.27 bbb arm-multi_v7_defconfig : passed 1:26.50 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:53.25 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:53.76 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:50.19 capri arm-bcm_defconfig : passed 0:57.58 capri arm-multi_v7_defconfig : passed 0:46.13 chitra powerpc-ppc64_defconfig : passed 2:01.59 colombus arm-sunxi_defconfig : passed 2:29.38 colombus arm-multi_v7_defconfig : passed 2:27.94 colombus arm-multi_lpae_defconfig : passed 2:32.59 cosmic arm-imx_v6_v7_defconfig : passed 3:22.40 cosmic arm-multi_v7_defconfig : passed 2:54.80 cubie arm-sunxi_defconfig : passed 0:52.01 cubie arm-multi_v7_defconfig : passed 0:55.35 cubie2 arm-sunxi_defconfig : passed 0:50.46 cubie2 arm-multi_v7_defconfig : passed 1:04.06 cubie2 arm-multi_lpae_defconfig : passed 0:57.09 cubox arm-multi_v7_defconfig : passed 1:32.83 cubox arm-mvebu_v7_defconfig : passed 1:03.54 dalmore arm-tegra_defconfig : warnings 1:27.07 dalmore arm-multi_v7_defconfig : warnings 2:39.71 dalmore arm-multi_lpae_defconfig : warnings 1:24.86 jetsontk1 arm-tegra_defconfig : warnings 0:51.92 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.00 jetsontk1 arm-multi_lpae_defconfig : warnings 0:55.18 pandaes arm-omap2plus_defconfig : warnings 1:43.86 pandaes arm-multi_v7_defconfig : passed 1:46.96 parallella arm-multi_v7_defconfig : passed 2:51.18 pi arm-exynos_defconfig : passed 2:16.94 pit arm-multi_v7_defconfig : passed 2:22.33 pit arm-multi_lpae_defconfig : passed 2:18.49 seaboard arm-tegra_defconfig : warnings 1:03.45 seaboard arm-multi_v7_defconfig : warnings 1:02.10 seattle arm64-defconfig : passed 2:30.37 snow arm-exynos_defconfig : passed 2:11.55 snow arm-multi_v7_defconfig : passed 2:01.22 snow arm-multi_lpae_defconfig : passed 2:02.19 snowball arm-u8500_defconfig : passed 1:13.43 snowball arm-multi_v7_defconfig : passed 1:38.59 trimslice arm-multi_v7_defconfig : warnings 2:15.54 wandboard arm-imx_v6_v7_defconfig : passed 1:18.88 wandboard arm-multi_v7_defconfig : passed 1:18.20
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.54 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:20.62 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:32.53 hummingboard arm-multi_v7_defconfig : OFFLINE 2:13.91 pit arm-exynos_defconfig : OFFLINE 1:56.10 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:39.78 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:56.31 sama5 arm-sama5_defconfig : OFFLINE 2:26.25 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:26.06 socfpga arm-socfpga_defconfig : OFFLINE 2:22.24 socfpga arm-multi_v7_defconfig : OFFLINE 2:14.79
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.423094] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.430051] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.436570] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.443523] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.449108] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.455812] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.465809] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.477601] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.484218] [drm] No driver support for vblank timestamp query. [ 3.490164] drm drm: No connectors reported connected with modes [ 3.496177] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.522935] Console: switching to colour frame buffer device 128x48 [ 3.535272] drm drm: fb0: frame buffer device [ 3.553680] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.564452] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.570916] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.576326] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.584163] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.598694] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.605746] hub 1-0:1.0: USB hub found [ 3.609516] hub 1-0:1.0: 1 port detected [ 3.614438] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.619851] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.627602] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.638686] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.645644] hub 2-0:1.0: USB hub found [ 3.649417] hub 2-0:1.0: 1 port detected [ 3.657447] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.671160] vdd_sata,avdd_plle: disabling [ 3.675555] usb1_vbus: disabling [ 3.679617] Waiting for root device /dev/mmcblk0p1... [ 3.963692] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.908731] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:56]: got exception: timeout ~$off
[PYBOOT] [beaver 01:57]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.504201] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.511245] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.516846] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.524387] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.534384] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.546954] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.553596] [drm] No driver support for vblank timestamp query. [ 6.559601] drm drm: No connectors reported connected with modes [ 6.565626] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.591154] Console: switching to colour frame buffer device 128x48 [ 6.602964] drm drm: fb0: frame buffer device [ 6.630794] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.640093] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.646567] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.651999] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.659975] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.680795] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.688405] hub 1-0:1.0: USB hub found [ 6.692199] hub 1-0:1.0: 1 port detected [ 6.697001] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.702442] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.710315] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.730789] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.738281] hub 2-0:1.0: USB hub found [ 6.742068] hub 2-0:1.0: 1 port detected [ 6.750259] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.768510] vdd_sata,avdd_plle: disabling [ 6.773022] usb1_vbus: disabling [ 6.776429] ALSA device list: [ 6.779385] #0: NVIDIA Tegra Beaver [ 6.783646] Waiting for root device /dev/mmcblk0p1... [ 7.060799] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.046095] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.791221] NET: Registered protocol family 10 [ 1.791873] sit: IPv6 over IPv4 tunneling driver [ 1.796690] NET: Registered protocol family 17 [ 1.799930] NET: Registered protocol family 15 [ 1.804421] Key type dns_resolver registered [ 1.808740] Registering SWP/SWPB emulation handler [ 1.816649] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.821290] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.828710] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.835866] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.842448] [drm] No driver support for vblank timestamp query. [ 1.848366] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.854751] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.859916] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.867085] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.875837] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.885592] mmc1: new DDR MMC card at address 0001 [ 1.890575] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.894837] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.900675] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.906375] max98090 1-0010: MAX98090 REVID=0x43 [ 1.911164] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.917718] mmcblk1: p1 p2 [ 1.920119] max98090 1-0010: use default 2.8v micbias [ 1.930491] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.933879] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.971287] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 1.988127] VDD10_HDMI_1.0V: disabling [ 1.988808] vdd_g3d: disabling [ 1.989881] BUCK8_2.8V: disabling [ 1.993831] ALSA device list: [ 1.995515] #0: Odroid-U3 [ 1.999201] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.973109] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979636] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987636] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998739] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006888] ldo9: bypassed regulator has no supply! [ 2.012011] ldo9: failed to get the current voltage(-517) [ 2.017679] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031805] smsc95xx v1.0.4 [ 2.035991] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059254] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065659] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.083046] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ca:c2:2f:49:9e:df [ 2.101917] smps9: Bringing 0uV into 2100000-2100000uV [ 2.120633] ldo9: bypassed regulator has no supply! [ 2.125749] ldo9: failed to get the current voltage(-517) [ 2.131413] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.145496] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177114] smps9: Bringing 0uV into 2100000-2100000uV [ 2.195732] ldo9: bypassed regulator has no supply! [ 2.200850] ldo9: failed to get the current voltage(-517) [ 2.206518] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.221024] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:37:41 UTC (946687061) [ 2.237004] pbias_mmc_omap5: disabling [ 2.240947] vmmcsdio_fixed: disabling [ 2.245481] Waiting for root device /dev/mmcblk1p2... [ 2.323494] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.459347] hub 1-2:1.0: USB hub found [ 2.463363] hub 1-2:1.0: 3 ports detected [ 2.469234] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.497272] smps9: Bringing 0uV into 2100000-2100000uV [ 2.515910] ldo9: bypassed regulator has no supply! [ 2.521036] ldo9: failed to get the current voltage(-517) [ 2.526701] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.942502] mmc0: new high speed MMC card at address 0001 [ 1.948525] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953423] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.959781] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959810] smps9: Bringing 0uV into 2100000-2100000uV [ 1.974218] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.980724] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988739] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.999828] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.007444] smsc95xx v1.0.4 [ 2.010750] ldo9: bypassed regulator has no supply! [ 2.015874] ldo9: failed to get the current voltage(-517) [ 2.021553] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036901] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057824] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 4a:6a:1a:f6:28:e3 [ 2.070324] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076739] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107122] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125806] ldo9: bypassed regulator has no supply! [ 2.130926] ldo9: failed to get the current voltage(-517) [ 2.136588] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151166] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:35:16 UTC (946686916) [ 2.167153] pbias_mmc_omap5: disabling [ 2.171103] vmmcsdio_fixed: disabling [ 2.175696] Waiting for root device /dev/mmcblk1p2... [ 2.313480] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.449374] hub 1-2:1.0: USB hub found [ 2.453391] hub 1-2:1.0: 3 ports detected [ 2.459264] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.487154] smps9: Bringing 0uV into 2100000-2100000uV [ 2.505821] ldo9: bypassed regulator has no supply! [ 2.510946] ldo9: failed to get the current voltage(-517) [ 2.516612] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.999093] ldo9: bypassed regulator has no supply! [ 4.004224] ldo9: failed to get the current voltage(-517) [ 4.009907] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.032804] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.040347] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.046906] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.053221] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.060090] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.069690] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.079186] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.086237] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.092376] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.098670] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.105535] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.115132] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.124633] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.131682] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149956] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156251] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163115] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172708] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182202] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189237] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.210404] smps9: Bringing 0uV into 2100000-2100000uV [ 4.239640] ldo9: bypassed regulator has no supply! [ 4.244754] ldo9: failed to get the current voltage(-517) [ 4.250432] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.270539] hctosys: unable to open rtc device (rtc0) [ 4.275836] sr_init: No PMIC hook to init smartreflex [ 4.281343] sr_init: platform driver register failed for SR [ 4.308958] pbias_mmc_omap5: disabling [ 4.312927] vmmcsdio_fixed: disabling [ 4.319007] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533412] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539763] isl29018 7-0044: Failed to read 1: -6 [ 1.544349] isl29018 7-0044: regmap initialization fails: -6 [ 1.555243] NET: Registered protocol family 10 [ 1.559674] sit: IPv6 over IPv4 tunneling driver [ 1.563250] NET: Registered protocol family 17 [ 1.567256] can: controller area network core (rev 20120528 abi 9) [ 1.573446] NET: Registered protocol family 29 [ 1.577834] can: raw protocol (rev 20120528) [ 1.582084] can: broadcast manager protocol (rev 20120528 t) [ 1.587725] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593448] Key type dns_resolver registered [ 1.597773] ThumbEE CPU extension supported. [ 1.601694] Registering SWP/SWPB emulation handler [ 1.611568] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617045] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623413] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628788] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638891] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649234] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654681] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664865] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671046] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676425] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686160] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708857] Waiting for root device /dev/mmcblk0p1... [ 1.712737] mmc0: tuning execution failed: -5 [ 1.716794] mmc0: error -5 whilst initialising MMC card [ 2.583219] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597375] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602837] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609210] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614594] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.538769] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545124] isl29018 7-0044: Failed to read 1: -6 [ 1.549709] isl29018 7-0044: regmap initialization fails: -6 [ 1.560637] NET: Registered protocol family 10 [ 1.565071] sit: IPv6 over IPv4 tunneling driver [ 1.568647] NET: Registered protocol family 17 [ 1.572651] can: controller area network core (rev 20120528 abi 9) [ 1.578841] NET: Registered protocol family 29 [ 1.583229] can: raw protocol (rev 20120528) [ 1.587478] can: broadcast manager protocol (rev 20120528 t) [ 1.593121] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598843] Key type dns_resolver registered [ 1.603170] ThumbEE CPU extension supported. [ 1.607089] Registering SWP/SWPB emulation handler [ 1.616995] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622478] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628843] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634217] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644322] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654669] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660119] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670302] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676486] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681863] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691592] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714431] Waiting for root device /dev/mmcblk0p1... [ 1.718316] mmc0: tuning execution failed: -5 [ 1.722372] mmc0: error -5 whilst initialising MMC card [ 2.583552] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597742] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603201] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609573] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614957] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:57]: got exception: timeout ~$off
[PYBOOT] [pi 01:58]: Done.
========================================================================
Board trimslice-arm-tegra_defconfig failure log: -------------------------------------------------
[WARN] [ 3.800207] [<c03cd7ec>] (__of_reset_control_get) from [<c05295cc>] (tegra_ehci_probe+0x39c/0x51c) [WARN] [ 3.809157] [<c05295cc>] (tegra_ehci_probe) from [<c0453260>] (platform_drv_probe+0x50/0xb0) [WARN] [ 3.817580] [<c0453260>] (platform_drv_probe) from [<c0451a9c>] (driver_probe_device+0x208/0x2b4) [WARN] [ 3.826435] [<c0451a9c>] (driver_probe_device) from [<c0451c00>] (__driver_attach+0xb8/0xbc) [WARN] [ 3.834856] [<c0451c00>] (__driver_attach) from [<c044fe14>] (bus_for_each_dev+0x68/0x9c) [WARN] [ 3.843018] [<c044fe14>] (bus_for_each_dev) from [<c0450eac>] (bus_add_driver+0x108/0x214) [WARN] [ 3.851265] [<c0450eac>] (bus_add_driver) from [<c0452308>] (driver_register+0x78/0xf4) [WARN] [ 3.859253] [<c0452308>] (driver_register) from [<c01017d0>] (do_one_initcall+0x44/0x16c) [WARN] [ 3.867417] [<c01017d0>] (do_one_initcall) from [<c0c00dc8>] (kernel_init_freeable+0x154/0x1e4) [WARN] [ 3.876102] [<c0c00dc8>] (kernel_init_freeable) from [<c0814de0>] (kernel_init+0x8/0x114) [WARN] [ 3.884265] [<c0814de0>] (kernel_init) from [<c0107678>] (ret_from_fork+0x14/0x3c) [WARN] [ 3.891873] ---[ end trace 3d9cf39931d921dd ]--- [WARN] [ 3.896481] tegra-ehci c5000000.usb: can't get utmi-pads reset from the PHY [WARN] [ 3.903439] tegra-ehci c5000000.usb: continuing, but please update your DT [WARN] [ 4.141681] mmc0: Invalid maximum block size, assuming 512 bytes [WARN] [ 4.200286] mmc1: Invalid maximum block size, assuming 512 bytes [WARN] [ 4.276150] tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input [WARN] [ 4.302446] tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input [WARN] [ 4.328335] tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input [WARN] [ 7.620637] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended [WARN] [ 37.222858] CPU: 0 PID: 1818 Comm: getty Tainted: G W 4.7.0-rc2-00139-g729d378 #1 [WARN] [ 37.231474] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [WARN] [ 37.237825] [<c010fa5c>] (unwind_backtrace) from [<c010b038>] (show_stack+0x10/0x14) [WARN] [ 37.245619] [<c010b038>] (show_stack) from [<c0348390>] (dump_stack+0x88/0x9c) [WARN] [ 37.252894] [<c0348390>] (dump_stack) from [<c016bd10>] (__report_bad_irq+0x2c/0xcc) [WARN] [ 37.260674] [<c016bd10>] (__report_bad_irq) from [<c016c118>] (note_interrupt+0x28c/0x2dc) [WARN] [ 37.268971] [<c016c118>] (note_interrupt) from [<c01696d0>] (handle_irq_event_percpu+0xec/0x14c) [WARN] [ 37.277785] [<c01696d0>] (handle_irq_event_percpu) from [<c0169768>] (handle_irq_event+0x38/0x5c) [WARN] [ 37.286688] [<c0169768>] (handle_irq_event) from [<c016c92c>] (handle_fasteoi_irq+0xb8/0x190) [WARN] [ 37.295243] [<c016c92c>] (handle_fasteoi_irq) from [<c0168cd4>] (generic_handle_irq+0x24/0x34) [WARN] [ 37.303880] [<c0168cd4>] (generic_handle_irq) from [<c0168f84>] (__handle_domain_irq+0x5c/0xb4) [WARN] [ 37.312603] [<c0168f84>] (__handle_domain_irq) from [<c0101438>] (gic_handle_irq+0x48/0x8c) [WARN] [ 37.320975] [<c0101438>] (gic_handle_irq) from [<c010bb94>] (__irq_svc+0x54/0x90) [WARN] [ 37.328462] Exception stack(0xee531d18 to 0xee531d60) [WARN] [ 37.333528] 1d00: 00404100 c0d5ea00 [WARN] [ 37.341729] 1d20: 00000000 00000000 00000082 00000000 ee5300 [PYBOOT] [trimslice 02:50]: got exception: ERROR: Timeout waiting for command: dmesg -l warn | awk '{ print "[WARN] " $0 }'. ~$off
[PYBOOT] [trimslice 02:51]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter