Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.8-rc5-451-gdd3e3bb/
Failed boards:
beaver arm-tegra_defconfig : FAILED 1:44.50 beaver arm-multi_v7_defconfig : FAILED 2:02.87 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:49.71 capri bcm_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 2:01.42 colombus arm-multi_v7_defconfig : FAILED 2:03.70 colombus arm-multi_lpae_defconfig : FAILED 2:02.19 colombus arm-multi_v7_nosmp_defconfig : FAILED 1:19.30 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:09.21 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.73 omap5uevm arm-multi_lpae_defconfig : FAILED 1:05.73 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 0:56.88 pi arm-multi_v7_nosmp_defconfig : FAILED 1:46.98 pit arm-exynos_defconfig : FAILED 1:51.22 wandboard arm-imx_v6_v7_defconfig : FAILED 1:45.73 wandboard arm-multi_v7_defconfig : FAILED 2:02.54 wandboard arm-multi_v7_nosmp_defconfig : FAILED 1:51.30
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.05 arndale arm-exynos_defconfig : passed 1:32.59 arndale arm-multi_v7_defconfig : passed 1:57.47 arndale arm-multi_lpae_defconfig : passed 1:32.65 arndale arm-multi_v7_nosmp_defconfig : warnings 1:19.03 bbb arm-omap2plus_defconfig : passed 1:45.03 bbb arm-multi_v7_defconfig : passed 1:20.16 beagleboard-x15 arm-omap2plus_defconfig : passed 0:52.31 beagleboard-x15 arm-multi_v7_defconfig : passed 0:48.40 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:56.12 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:57.97 capri arm-multi_v7_defconfig : passed 0:54.68 capri arm-multi_v7_nosmp_defconfig : warnings 1:00.98 chitra powerpc-pasemi_defconfig : passed 1:42.56 colombus arm-sunxi_defconfig : passed 2:19.94 cosmic arm-imx_v6_v7_defconfig : passed 3:21.43 cosmic arm-multi_v7_defconfig : passed 2:57.35 cosmic arm-multi_v7_nosmp_defconfig : passed 2:40.65 cubie arm-sunxi_defconfig : passed 0:49.68 cubie arm-multi_v7_defconfig : passed 0:50.05 cubie arm-multi_v7_nosmp_defconfig : passed 1:04.57 cubie2 arm-sunxi_defconfig : passed 0:50.13 cubie2 arm-multi_v7_defconfig : passed 0:56.64 cubie2 arm-multi_lpae_defconfig : passed 1:10.52 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:00.18 cubox arm-multi_v7_defconfig : passed 1:02.09 cubox arm-mvebu_v7_defconfig : passed 1:14.10 cubox arm-multi_v7_nosmp_defconfig : passed 1:04.39 jetsontk1 arm-tegra_defconfig : passed 0:51.81 jetsontk1 arm-multi_v7_defconfig : passed 0:47.67 jetsontk1 arm-multi_lpae_defconfig : passed 0:57.72 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:50.78 omap5uevm arm-omap2plus_defconfig : passed 1:07.26 pandaes arm-omap2plus_defconfig : warnings 1:43.55 pandaes arm-multi_v7_defconfig : passed 1:36.40 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:46.98 pi arm-exynos_defconfig : passed 2:09.43 pi arm-multi_v7_defconfig : passed 2:18.03 pi arm-multi_lpae_defconfig : passed 2:16.84 pit arm-multi_v7_defconfig : passed 2:15.70 pit arm-multi_lpae_defconfig : passed 2:21.13 pit arm-multi_v7_nosmp_defconfig : warnings 2:10.09 seaboard arm-tegra_defconfig : passed 1:03.76 seaboard arm-multi_v7_defconfig : passed 0:59.85 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:00.21 seattle arm64-defconfig : warnings 2:33.64 snow arm-exynos_defconfig : passed 2:13.00 snow arm-multi_v7_defconfig : passed 2:04.76 snow arm-multi_lpae_defconfig : passed 1:59.47 snow arm-multi_v7_nosmp_defconfig : warnings 1:59.47 snowball arm-u8500_defconfig : passed 2:20.74 snowball arm-multi_v7_defconfig : passed 1:19.49 snowball arm-multi_v7_nosmp_defconfig : warnings 1:12.47 trimslice arm-tegra_defconfig : passed 1:36.91 trimslice arm-multi_v7_defconfig : passed 1:51.05 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:39.12
Offline boards:
bbb arm-multi_v7_nosmp_defconfig : OFFLINE 1:40.59 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:16.24 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:37.62 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.09 dalmore arm-tegra_defconfig : OFFLINE 2:18.41 dalmore arm-multi_v7_defconfig : OFFLINE 2:33.22 dalmore arm-multi_lpae_defconfig : OFFLINE 2:26.42 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.76 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:46.38 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.00 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.71 parallella arm-multi_v7_defconfig : OFFLINE 2:37.41 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.51 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:56.16 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.88 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:52.56 sama5 arm-sama5_defconfig : OFFLINE 2:21.57 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:21.74 socfpga arm-socfpga_defconfig : OFFLINE 2:30.08 socfpga arm-multi_v7_defconfig : OFFLINE 2:24.60 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.84
Board legend is available at http://arm-soc.lixom.net/boards.html
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.288114] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.295075] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.301594] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.308553] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.314140] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.320851] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf097e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.330852] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.342684] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.349301] [drm] No driver support for vblank timestamp query. [ 3.355246] drm drm: No connectors reported connected with modes [ 3.361259] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.387051] Console: switching to colour frame buffer device 128x48 [ 3.399023] drm drm: fb0: frame buffer device [ 3.418708] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.429538] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.436006] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.441415] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.449248] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.468719] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.475788] hub 1-0:1.0: USB hub found [ 3.479560] hub 1-0:1.0: 1 port detected [ 3.484544] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.489961] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.497702] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.518713] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.525692] hub 2-0:1.0: USB hub found [ 3.529458] hub 2-0:1.0: 1 port detected [ 3.539248] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.553076] vdd_sata,avdd_plle: disabling [ 3.557830] usb1_vbus: disabling [ 3.561893] Waiting for root device /dev/mmcblk0p1... [ 3.863717] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.861306] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 02:01]: got exception: timeout ~$off
[PYBOOT] [beaver 02:02]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.232776] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.239729] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.246245] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.253181] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.258762] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.265355] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.275347] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.285615] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.292230] [drm] No driver support for vblank timestamp query. [ 3.298166] drm drm: No connectors reported connected with modes [ 3.304167] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.323549] Console: switching to colour frame buffer device 128x48 [ 3.335326] drm drm: fb0: frame buffer device [ 3.339764] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.349920] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.356376] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.361780] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.369494] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.388157] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.394505] hub 1-0:1.0: USB hub found [ 3.398269] hub 1-0:1.0: 1 port detected [ 3.403011] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.408420] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.416075] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.433154] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.439426] hub 2-0:1.0: USB hub found [ 3.443185] hub 2-0:1.0: 1 port detected [ 3.450681] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.463797] vdd_sata,avdd_plle: disabling [ 3.468188] usb1_vbus: disabling [ 3.472105] Waiting for root device /dev/mmcblk0p1... [ 3.773158] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.761629] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 7.064245] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.071303] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.076904] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.084394] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.094394] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.106778] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.113420] [drm] No driver support for vblank timestamp query. [ 7.119427] drm drm: No connectors reported connected with modes [ 7.125439] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.151256] Console: switching to colour frame buffer device 128x48 [ 7.163066] drm drm: fb0: frame buffer device [ 7.200816] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.209963] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.216461] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.221895] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.229874] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.260821] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.268446] hub 1-0:1.0: USB hub found [ 7.272247] hub 1-0:1.0: 1 port detected [ 7.277037] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.282467] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.290337] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.320812] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.328280] hub 2-0:1.0: USB hub found [ 7.332066] hub 2-0:1.0: 1 port detected [ 7.340266] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.358407] vdd_sata,avdd_plle: disabling [ 7.362913] usb1_vbus: disabling [ 7.366301] ALSA device list: [ 7.369258] #0: NVIDIA Tegra Beaver [ 7.373446] Waiting for root device /dev/mmcblk0p1... [ 7.690819] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.776219] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
PID hash table entries: 4096 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 4023680K/4194304K available (10012K kernel code, 1748K rwdata, 3432K rodata, 4204K init, 1027K bss, 170624K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack d [PYBOOT] [chitra 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:59]: got exception: timeout ~$off
[PYBOOT] [chitra 02:00]: Done. Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.371960] 1f60: 00000000 c035d1c0 00000001 00000000 ffffffff ee034a00 00000000 00000000 [ 2.380646] 1f80: ee0e1f80 ee0e1f80 00000001 00010001 ee0e1f90 ee0e1f90 ee033580 ee033580 [ 2.389303] 1fa0: c035d0e4 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.397940] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.406606] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 2.415377] [<c035d5e8>] (kthread_data) from [<c03589c0>] (wq_worker_sleeping+0x8/0xd0) [ 2.424029] [<c03589c0>] (wq_worker_sleeping) from [<c0ba80c0>] (__schedule+0x374/0x584) [ 2.432715] [<c0ba80c0>] (__schedule) from [<c0ba8314>] (schedule+0x44/0x9c) [ 2.440390] [<c0ba8314>] (schedule) from [<c03446e0>] (do_exit+0x6d8/0xa78) [ 2.447919] [<c03446e0>] (do_exit) from [<c030bdac>] (die+0x410/0x474) [ 2.455009] [<c030bdac>] (die) from [<c031ce10>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.463531] [<c031ce10>] (__do_kernel_fault.part.0) from [<c0317e40>] (do_page_fault+0x36c/0x380) [ 2.472965] [<c0317e40>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.481158] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 2.488864] Exception stack(0xee0e1cd8 to 0xee0e1d20) [ 2.494266] 1cc0: 00000000 00000000 [ 2.502938] 1ce0: 00000000 ee0182cc ee018298 c133db90 00000001 00000000 ee01a008 ffffffff [ 2.511598] 1d00: 00000000 0010c8e0 ee018288 ee0e1d28 c03a2b30 c03a2ad4 20000013 ffffffff [ 2.520368] [<c030c478>] (__dabt_svc) from [<c03a2ad4>] (clocksource_unbind+0x2c/0x5c) [ 2.528920] [<c03a2ad4>] (clocksource_unbind) from [<c03a2b30>] (clocksource_unregister+0x2c/0x44) [ 2.538497] [<c03a2b30>] (clocksource_unregister) from [<c0a22020>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 2.548235] [<c0a22020>] (sun5i_rate_cb_clksrc) from [<c035dca8>] (notifier_call_chain+0x44/0x84) [ 2.557703] [<c035dca8>] (notifier_call_chain) from [<c035e018>] (__srcu_notifier_call_chain+0x44/0x60) [ 2.567702] [<c035e018>] (__srcu_notifier_call_chain) from [<c035e04c>] (srcu_notifier_call_chain+0x18/0x20) [ 2.578101] [<c035e04c>] (srcu_notifier_call_chain) from [<c0a4435c>] (__clk_notify+0x70/0x7c) [ 2.587269] [<c0a4435c>] (__clk_notify) from [<c0a444a8>] (clk_propagate_rate_change+0xa4/0xc4) [ 2.596531] [<c0a444a8>] (clk_propagate_rate_change) from [<c0a44470>] (clk_propagate_rate_change+0x6c/0xc4) [ 2.606852] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.613292] ---[ end trace 474720eac53b0aee ]--- [ 2.618175] Fixing recursive fault but reboot is needed! [ 7.010847] usb 1-1: device descriptor read/64, error -110 [ 22.690419] usb 1-1: device descriptor read/64, error -110 [ 22.925768] usb 1-1: new high-speed USB device number 3 using ehci-platform
[PYBOOT] [colombus 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 02:00]: got exception: timeout ~$off
[PYBOOT] [colombus 02:01]: Done. Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.371969] 1f60: 00000000 c035d1c0 00000001 00000000 ffffffff ee034a00 00000000 00000000 [ 2.380658] 1f80: ee0e1f80 ee0e1f80 00000001 00010001 ee0e1f90 ee0e1f90 ee033580 ee033580 [ 2.389317] 1fa0: c035d0e4 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.397958] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.406611] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 2.415380] [<c035d5e8>] (kthread_data) from [<c03589c0>] (wq_worker_sleeping+0x8/0xd0) [ 2.424037] [<c03589c0>] (wq_worker_sleeping) from [<c0ba80c0>] (__schedule+0x374/0x584) [ 2.432742] [<c0ba80c0>] (__schedule) from [<c0ba8314>] (schedule+0x44/0x9c) [ 2.440410] [<c0ba8314>] (schedule) from [<c03446e0>] (do_exit+0x6d8/0xa78) [ 2.447938] [<c03446e0>] (do_exit) from [<c030bdac>] (die+0x410/0x474) [ 2.455020] [<c030bdac>] (die) from [<c031ce10>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.463542] [<c031ce10>] (__do_kernel_fault.part.0) from [<c0317e40>] (do_page_fault+0x36c/0x380) [ 2.472978] [<c0317e40>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.481169] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 2.488881] Exception stack(0xee0e1cd8 to 0xee0e1d20) [ 2.494286] 1cc0: 00000000 00000000 [ 2.502960] 1ce0: 00000000 ee0182cc ee018298 c133db90 00000001 00000000 ee01a008 ffffffff [ 2.511636] 1d00: 00000000 0010c8e0 ee018288 ee0e1d28 c03a2b30 c03a2ad4 20000013 ffffffff [ 2.520409] [<c030c478>] (__dabt_svc) from [<c03a2ad4>] (clocksource_unbind+0x2c/0x5c) [ 2.528966] [<c03a2ad4>] (clocksource_unbind) from [<c03a2b30>] (clocksource_unregister+0x2c/0x44) [ 2.538549] [<c03a2b30>] (clocksource_unregister) from [<c0a22020>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 2.548279] [<c0a22020>] (sun5i_rate_cb_clksrc) from [<c035dca8>] (notifier_call_chain+0x44/0x84) [ 2.557755] [<c035dca8>] (notifier_call_chain) from [<c035e018>] (__srcu_notifier_call_chain+0x44/0x60) [ 2.567754] [<c035e018>] (__srcu_notifier_call_chain) from [<c035e04c>] (srcu_notifier_call_chain+0x18/0x20) [ 2.578157] [<c035e04c>] (srcu_notifier_call_chain) from [<c0a4435c>] (__clk_notify+0x70/0x7c) [ 2.587327] [<c0a4435c>] (__clk_notify) from [<c0a444a8>] (clk_propagate_rate_change+0xa4/0xc4) [ 2.596584] [<c0a444a8>] (clk_propagate_rate_change) from [<c0a44470>] (clk_propagate_rate_change+0x6c/0xc4) [ 2.606901] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.613354] ---[ end trace 08663a6e15bce453 ]--- [ 2.618239] Fixing recursive fault but reboot is needed! [ 7.005759] usb 1-1: device descriptor read/64, error -110 [ 22.685760] usb 1-1: device descriptor read/64, error -110 [ 22.920692] usb 1-1: new high-speed USB device number 3 using ehci-platform
[PYBOOT] [colombus 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 02:01]: got exception: timeout ~$off
[PYBOOT] [colombus 02:03]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 33.955326] [<c0b45ea8>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 33.965247] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 33.974717] [<c030b7b0>] (die) from [<c031a728>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 33.985312] [<c031a728>] (__do_kernel_fault.part.0) from [<c0315990>] (do_page_fault+0x36c/0x380) [ 33.996769] [<c0315990>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.006897] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.015763] Exception stack(0xee0728e8 to 0xee072930) [ 34.023036] 28e0: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 [ 34.033854] 2900: c1132be0 00000000 ee060eec c0b45ea8 c034fada ee072984 ee0608b8 ee072938 [ 34.044014] 2920: c034b360 c034fad8 20000193 ffffffff [ 34.051748] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.061682] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.072464] [<c034b360>] (wq_worker_sleeping) from [<c0b45d10>] (__schedule+0x310/0x464) [ 34.083504] [<c0b45d10>] (__schedule) from [<c0b45ea8>] (schedule+0x44/0x9c) [ 34.093437] [<c0b45ea8>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.103368] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.112836] [<c030b7b0>] (die) from [<c031a728>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.123441] [<c031a728>] (__do_kernel_fault.part.0) from [<c0315990>] (do_page_fault+0x36c/0x380) [ 34.134899] [<c0315990>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.145025] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.153896] Exception stack(0xee072b20 to 0xee072b68) [ 34.161407] 2b20: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 c1132be0 00000000 [ 34.172231] 2b40: ee060eec c0b45ea8 c034fada ee072bbc ee0608b8 ee072b70 c034b360 c034fad8 [ 34.182023] 2b60: 20000193 ffffffff [ 34.188143] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.198086] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.208870] [<c034b360>] (wq_worker_sleeping) from [<c0b45d10>] (__schedule+0x310/0x464) [ 34.219909] [<c0b45d10>] (__schedule) from [<c0b45ea8>] (schedule+0x44/0x9c) [ 34.229854] [<c0b45ea8>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.239776] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.249241] [<c030b7b0>] (die) from [<c031a728>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.259835] [<c031a728>] (__do_kernel_fault.part.0) from [<c0315990>] (do_page_fault+0x36c/0x380) [ 34.271303] [<c0315990>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.281429] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.290332] Exception stack(0xee072d58 to 0xee072da0)
[PYBOOT] [colombus 01:17]: got exception: panic ~$off
[PYBOOT] [colombus 01:18]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.243627] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 2.250405] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.259060] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 2.259315] mmc1: new DDR MMC card at address 0001 [ 2.259810] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.260031] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.260241] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.260443] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.261583] mmcblk1: p1 p2 [ 2.294280] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 2.299756] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.306957] exynos-bus: new bus device registered: bus_dmc (100000 KHz ~ 400000 KHz) [ 2.314131] exynos-bus: new bus device registered: bus_acp (100000 KHz ~ 267000 KHz) [ 2.321588] exynos-bus: new bus device registered: bus_c2c (100000 KHz ~ 400000 KHz) [ 2.329856] exynos-bus: new bus device registered: bus_leftbus (100000 KHz ~ 200000 KHz) [ 2.337361] exynos-bus: new bus device registered: bus_rightbus (100000 KHz ~ 200000 KHz) [ 2.345626] exynos-bus: new bus device registered: bus_display (160000 KHz ~ 200000 KHz) [ 2.353711] exynos-bus: new bus device registered: bus_fsys (100000 KHz ~ 134000 KHz) [ 2.361506] exynos-bus: new bus device registered: bus_peri ( 50000 KHz ~ 100000 KHz) [ 2.369211] exynos-bus: new bus device registered: bus_mfc (100000 KHz ~ 200000 KHz) [ 2.375154] devfreq bus_dmc: Couldn't update frequency transition information. [ 2.385035] devfreq bus_leftbus: Couldn't update frequency transition information. [ 2.412790] max98090 1-0010: MAX98090 REVID=0x43 [ 2.417308] max98090 1-0010: use default 2.8v micbias [ 2.429355] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.434724] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.467673] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.491570] VDD10_HDMI_1.0V: disabling [ 2.493433] vdd_g3d: disabling [ 2.494672] BUCK8_P3V3: disabling [ 2.498277] ALSA device list: [ 2.498982] #0: Odroid-U3 [ 2.504008] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:07]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:08]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.149253] 1e40: 00000000 00000000 c133d7c0 0000028e c1201ed8 00000001 77359400 00000000 [ 2.149257] 1e60: c1202510 c1202508 0beac3fb c1201e88 c039e7c8 00000000 60000193 ffffffff [ 2.149262] [<c030c664>] (__pabt_svc) from [<c039e7c8>] (ktime_get+0x4c/0xe8) [ 2.149269] [<c039e7c8>] (ktime_get) from [<c03a8f1c>] (__tick_nohz_idle_enter+0x28/0x424) [ 2.149275] [<c03a8f1c>] (__tick_nohz_idle_enter) from [<c034657c>] (irq_exit+0xcc/0x118) [ 2.149280] [<c034657c>] (irq_exit) from [<c0387778>] (__handle_domain_irq+0x60/0xb4) [ 2.149285] [<c0387778>] (__handle_domain_irq) from [<c0301780>] (gic_handle_irq+0x54/0x98) [ 2.149289] [<c0301780>] (gic_handle_irq) from [<c030c50c>] (__irq_svc+0x6c/0x90) [ 2.149290] Exception stack(0xc1201f50 to 0xc1201f98) [ 2.149293] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.149297] 1f60: c1200000 c12024a4 00000001 00000000 00000000 c1115080 c1202510 c1202508 [ 2.149301] 1f80: 60000013 c1201fa0 c032b824 c0308740 a0000013 ffffffff [ 2.149306] [<c030c50c>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.149312] [<c0308740>] (arch_cpu_idle) from [<c037a8bc>] (cpu_startup_entry+0x1cc/0x228) [ 2.149319] [<c037a8bc>] (cpu_startup_entry) from [<c1000c50>] (start_kernel+0x374/0x380) [ 2.149323] [<c1000c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.149328] Code: 3afffff6 e8bd8070 e30c3d40 e34c3123 (e593200c) [ 2.149333] ---[ end trace fa6968478e295e92 ]--- [ 2.149336] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.149340] CPU1: stopping [ 2.149344] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.8.0-rc5-00451-gdd3e3bb #1 [ 2.149346] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.149355] [<c031043c>] (unwind_backtrace) from [<c030b998>] (show_stack+0x10/0x14) [ 2.149360] [<c030b998>] (show_stack) from [<c05994bc>] (dump_stack+0x88/0x9c) [ 2.149366] [<c05994bc>] (dump_stack) from [<c030eb9c>] (handle_IPI+0x174/0x194) [ 2.149371] [<c030eb9c>] (handle_IPI) from [<c03017c0>] (gic_handle_irq+0x94/0x98) [ 2.149375] [<c03017c0>] (gic_handle_irq) from [<c030c50c>] (__irq_svc+0x6c/0x90) [ 2.149377] Exception stack(0xee09bf88 to 0xee09bfd0) [ 2.149381] bf80: 00000001 00000000 ea000013 f0880000 ee09a000 c12024a4 [ 2.149386] bfa0: 00000002 00000000 00000000 c1115080 c1202510 c1202508 60000013 ee09bfd8 [ 2.149389] bfc0: c032b824 c0308740 a0000013 ffffffff [ 2.149395] [<c030c50c>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.149401] [<c0308740>] (arch_cpu_idle) from [<c037a8bc>] (cpu_startup_entry+0x1cc/0x228) [ 2.149406] [<c037a8bc>] (cpu_startup_entry) from [<80301c6c>] (0x80301c6c) [ 3.003948] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [omap5uevm 01:03]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:04]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.878378] vdds_1v8_main: supplied by smps7 [ 1.883794] SMPS8: supplied by vsys_cobra [ 1.888659] mmc0: new high speed MMC card at address 0001 [ 1.894680] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.899599] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.905957] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.912793] SMPS9: supplied by vsys_cobra [ 1.918106] smps9: Bringing 0uV into 2100000-2100000uV [ 1.926107] LDO1: supplied by vsys_cobra [ 1.930532] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.936907] LDO2: supplied by vsys_cobra [ 1.941337] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.947722] LDO3: supplied by vdds_1v8_main [ 1.953749] LDO4: supplied by vdds_1v8_main [ 1.958458] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.964873] LDO5: supplied by vsys_cobra [ 1.970616] LDO6: supplied by vdds_1v8_main [ 1.978148] LDO7: supplied by vsys_cobra [ 1.982579] ldo7: Bringing 0uV into 2000000-2000000uV [ 1.988960] LDO8: supplied by vsys_cobra [ 1.994711] LDO9: supplied by vmmcsd_fixed [ 2.000806] LDOLN: supplied by vsys_cobra [ 2.006656] LDOUSB: supplied by vsys_cobra [ 2.014930] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.034702] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.042486] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.050367] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 23.073899] INFO: rcu_sched detected stalls on CPUs/tasks: [ 23.079648] 0-...: (1 GPs behind) idle=7dd/140000000000000/0 softirq=52/52 fqs=2100 [ 23.087836] (detected by 1, t=4202 jiffies, g=-273, c=-274, q=21) [ 23.094304] Task dump for CPU 0: [ 23.097679] swapper/0 R running 0 0 0 0x00000002 [ 23.104356] [<c0ba7f28>] (__schedule) from [<c12024a4>] (0xc12024a4)
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.167801] de20: ed84c6e8 ed84c6e8 ee06de60 00000000 ee01e7b4 c10fa51c 00000008 c03fd29c [ 3.176362] de40: 00000000 c03f4288 c0f33931 00000009 ed84c6e8 c0f33928 ee01e7b4 c03f43a4 [ 3.184918] de60: 65d2ee0d 00000009 c0f33928 00000000 00000000 c12489e0 ed84c6e8 c0516b98 [ 3.193478] de80: c0c16c68 00008124 c0c16c68 c0c1759c ee01e7b4 c0516c1c eda5d524 00000000 [ 3.202040] dea0: c0c16c68 ee01e780 c0d88b58 c1091834 00000000 c0516d64 c0c1759c c0c16c68 [ 3.210597] dec0: c0c16bec c0518288 c0c16c68 c0c16c68 c0c16bec ee01e780 ee01e780 c09ebbb8 [ 3.219168] dee0: c1258220 ee01e780 c0d88b58 c10471c4 c0d88b58 c0441a00 c10470c0 ffffe000 [ 3.227733] df00: 00000118 c0301d34 c11354b8 00000000 00000000 c0437194 c0c09f00 ee043700 [ 3.236293] df20: c0fa9c14 c0c1bff0 00000118 c034ef1c c0e4e4f0 c0fa8634 00000000 00000007 [ 3.244854] df40: 00000007 c0e61c54 00000000 c1217000 c1217000 00000118 c1217000 c1217000 [ 3.253407] df60: 00000118 c1091834 c1091838 c1000d80 00000007 00000007 00000000 c10005ac [ 3.261972] df80: 00000000 00000000 c0b446b4 00000000 00000000 00000000 00000000 00000000 [ 3.270534] dfa0: 00000000 c0b446bc 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 3.279089] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.287649] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 e8185809 12bf2182 [ 3.296216] [<c03df4ec>] (kmem_cache_alloc) from [<c03fd114>] (__d_alloc+0x24/0x19c) [ 3.304334] [<c03fd114>] (__d_alloc) from [<c03fd29c>] (d_alloc+0x10/0x54) [ 3.311527] [<c03fd29c>] (d_alloc) from [<c03f4288>] (__lookup_hash+0x30/0x8c) [ 3.319094] [<c03f4288>] (__lookup_hash) from [<c03f43a4>] (lookup_one_len+0xc0/0x120) [ 3.327383] [<c03f43a4>] (lookup_one_len) from [<c0516b98>] (start_creating+0x68/0xb8) [ 3.335670] [<c0516b98>] (start_creating) from [<c0516c1c>] (__debugfs_create_file+0x34/0xcc) [ 3.344593] [<c0516c1c>] (__debugfs_create_file) from [<c0516d64>] (debugfs_create_file_unsafe+0x30/0x38) [ 3.354614] [<c0516d64>] (debugfs_create_file_unsafe) from [<c0518288>] (debugfs_create_x32+0x38/0x40) [ 3.364353] [<c0518288>] (debugfs_create_x32) from [<c09ebbb8>] (clk_debug_create_one+0x9c/0x15c) [ 3.373643] [<c09ebbb8>] (clk_debug_create_one) from [<c10471c4>] (clk_debug_init+0x104/0x138) [ 3.382658] [<c10471c4>] (clk_debug_init) from [<c0301d34>] (do_one_initcall+0x44/0x16c) [ 3.391135] [<c0301d34>] (do_one_initcall) from [<c1000d80>] (kernel_init_freeable+0x134/0x1c4) [ 3.400245] [<c1000d80>] (kernel_init_freeable) from [<c0b446bc>] (kernel_init+0x8/0x110) [ 3.408803] [<c0b446bc>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 3.416717] Code: e5930000 e3500000 0a000016 e5943014 (e7905003) [ 3.423111] ---[ end trace 507fbeb485605e88 ]--- [ 3.427953] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.427953] [ 3.437510] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.437510]
[PYBOOT] [omap5uevm 00:55]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:56]: Done. Board pi-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.707297] NET: Registered protocol family 17 [ 1.711493] can: controller area network core (rev 20120528 abi 9) [ 1.717669] NET: Registered protocol family 29 [ 1.722072] can: raw protocol (rev 20120528) [ 1.726308] can: broadcast manager protocol (rev 20160617 t) [ 1.731963] can: netlink gateway (rev 20130117) max_hops=1 [ 1.737558] Key type dns_resolver registered [ 1.742009] ThumbEE CPU extension supported. [ 1.749713] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.755171] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.761549] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.766921] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.776675] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.786274] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.791701] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.801844] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.808074] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.813452] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.823072] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.834449] Waiting for root device /dev/mmcblk0p1... [ 1.838269] mmc0: tuning execution failed: -5 [ 1.842390] mmc0: error -5 whilst initialising MMC card [ 2.767974] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.780899] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.786344] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.792729] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.798109] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 5.281956] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.287102] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.298343] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.303771] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.310170] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.315548] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:45]: got exception: timeout ~$off
[PYBOOT] [pi 01:46]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 21.333092] BUG: spinlock lockup suspected on CPU#0, kworker/u16:0/6 [ 21.337959] lock: 0xee737800, .magic: dead4ead, .owner: kworker/u16:0/6, .owner_cpu: 0 [ 21.345940] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 4.8.0-rc5-00451-gdd3e3bb #1 [ 21.354961] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.361044] [<c010e0ec>] (unwind_backtrace) from [<c010ad50>] (show_stack+0x10/0x14) [ 21.368760] [<c010ad50>] (show_stack) from [<c032d4a0>] (dump_stack+0x78/0x8c) [ 21.375961] [<c032d4a0>] (dump_stack) from [<c015a908>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.383765] [<c015a908>] (do_raw_spin_lock) from [<c06e7860>] (__schedule+0x84/0x4b8) [ 21.391572] [<c06e7860>] (__schedule) from [<c06e7ce0>] (schedule+0x4c/0xac) [ 21.398599] [<c06e7ce0>] (schedule) from [<c011d5d8>] (do_exit+0x8b0/0xa74) [ 21.405539] [<c011d5d8>] (do_exit) from [<c010af8c>] (die+0x238/0x2f4) [ 21.412048] [<c010af8c>] (die) from [<c0114f38>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.419942] [<c0114f38>] (__do_kernel_fault.part.0) from [<c0110928>] (do_bad_area+0x0/0x8c) [ 21.428355] [<c0110928>] (do_bad_area) from [<c0110694>] (do_page_fault+0x0/0x294) [ 21.435901] [<c0110694>] (do_page_fault) from [<2dcd2000>] (0x2dcd2000) [ 21.442493] Sending NMI to all CPUs: [ 21.446048] NMI backtrace for cpu 0 [ 21.449519] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 4.8.0-rc5-00451-gdd3e3bb #1 [ 21.458540] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.464621] [<c010e0ec>] (unwind_backtrace) from [<c010ad50>] (show_stack+0x10/0x14) [ 21.472337] [<c010ad50>] (show_stack) from [<c032d4a0>] (dump_stack+0x78/0x8c) [ 21.479539] [<c032d4a0>] (dump_stack) from [<c0330e00>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.487344] [<c0330e00>] (nmi_cpu_backtrace) from [<c010ca34>] (raise_nmi+0x60/0x64) [ 21.495066] [<c010ca34>] (raise_nmi) from [<c0330d80>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.504001] [<c0330d80>] (nmi_trigger_all_cpu_backtrace) from [<c015a910>] (do_raw_spin_lock+0x104/0x1d8) [ 21.513542] [<c015a910>] (do_raw_spin_lock) from [<c06e7860>] (__schedule+0x84/0x4b8) [ 21.521349] [<c06e7860>] (__schedule) from [<c06e7ce0>] (schedule+0x4c/0xac) [ 21.528376] [<c06e7ce0>] (schedule) from [<c011d5d8>] (do_exit+0x8b0/0xa74) [ 21.535317] [<c011d5d8>] (do_exit) from [<c010af8c>] (die+0x238/0x2f4) [ 21.541824] [<c010af8c>] (die) from [<c0114f38>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.549718] [<c0114f38>] (__do_kernel_fault.part.0) from [<c0110928>] (do_bad_area+0x0/0x8c) [ 21.558132] [<c0110928>] (do_bad_area) from [<c0110694>] (do_page_fault+0x0/0x294) [ 21.565679] [<c0110694>] (do_page_fault) from [<2dcd2000>] (0x2dcd2000)
[PYBOOT] [pit 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:49]: got exception: timeout ~$off
[PYBOOT] [pit 01:50]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 2.787252] can: controller area network core (rev 20120528 abi 9) [ 2.793614] NET: Registered protocol family 29 [ 2.798074] can: raw protocol (rev 20120528) [ 2.802424] can: broadcast manager protocol (rev 20160617 t) [ 2.808144] can: netlink gateway (rev 20130117) max_hops=1 [ 2.814328] Key type dns_resolver registered [ 2.825110] Registering SWP/SWPB emulation handler [ 2.846842] 2188000.ethernet supply phy not found, using dummy regulator [ 2.853932] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 2.863056] pps pps0: new PPS source ptp0 [ 2.875542] libphy: fec_enet_mii_bus: probed [ 2.881914] fec 2188000.ethernet eth0: registered PHC device 1 [ 2.890329] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 2.903292] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 2.912498] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 2.983943] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 2.992168] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 3.001445] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.073781] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.083913] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.131794] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.146125] ALSA device list: [ 3.146179] mmc1: new high speed SDHC card at address aaaa [ 3.148857] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 3.152040] mmcblk1: p1 p2 [ 3.153950] mmc2: host does not support reading read-only switch, assuming write-enable [ 3.159717] mmc2: new high speed SDHC card at address 0001 [ 3.160699] mmcblk2: mmc2:0001 00000 7.61 GiB [ 3.162212] mmcblk2: p1 p2 [ 3.182674] #0: imx6-wandboard-sgtl5000 [ 3.186709] #1: imx-spdif [ 3.191032] Waiting for root device /dev/mmcblk0p2... [ 72.873911] random: crng init done
[PYBOOT] [wandboard 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:43]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:44]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.532660] NET: Registered protocol family 29 [ 1.537131] can: raw protocol (rev 20120528) [ 1.541422] can: broadcast manager protocol (rev 20160617 t) [ 1.547104] can: netlink gateway (rev 20130117) max_hops=1 [ 1.552983] Key type dns_resolver registered [ 1.557747] ThumbEE CPU extension supported. [ 1.562052] Registering SWP/SWPB emulation handler [ 1.574488] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.583462] 2188000.ethernet supply phy not found, using dummy regulator [ 1.590251] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.598635] pps pps0: new PPS source ptp0 [ 1.607382] libphy: fec_enet_mii_bus: probed [ 1.612348] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.619772] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.628958] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.680330] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.689083] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.698268] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.749742] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.759176] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.768752] hctosys: unable to open rtc device (rtc0) [ 1.783042] Waiting for root device /dev/mmcblk0p2... [ 1.820943] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.838091] mmc2: new high speed SDHC card at address 0001 [ 1.846088] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.853468] mmcblk2: p1 p2 [ 1.859283] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.866357] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.885519] mmc1: new high speed SDHC card at address aaaa [ 1.893440] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 1.901117] mmcblk1: p1 p2 [ 1.908069] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 3.214918] random: fast init done
[PYBOOT] [wandboard 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:00]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:02]: Done. Board wandboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.460728] can: controller area network core (rev 20120528 abi 9) [ 1.466968] NET: Registered protocol family 29 [ 1.471429] can: raw protocol (rev 20120528) [ 1.475711] can: broadcast manager protocol (rev 20160617 t) [ 1.481386] can: netlink gateway (rev 20130117) max_hops=1 [ 1.487197] Key type dns_resolver registered [ 1.491703] ThumbEE CPU extension supported. [ 1.525328] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.534483] 2188000.ethernet supply phy not found, using dummy regulator [ 1.543168] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.551436] pps pps0: new PPS source ptp0 [ 1.559287] libphy: fec_enet_mii_bus: probed [ 1.564095] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.571322] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.580506] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.634132] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.642627] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.653748] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.708288] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.715721] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.725054] hctosys: unable to open rtc device (rtc0) [ 1.737911] Waiting for root device /dev/mmcblk0p2... [ 1.798945] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.813026] mmc1: new high speed SDHC card at address aaaa [ 1.820905] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 1.826576] mmcblk1: p1 p2 [ 1.830239] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.839160] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.861134] mmc2: new high speed SDHC card at address 0001 [ 1.868920] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.876130] mmcblk2: p1 p2 [ 1.881621] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 2.983074] random: fast init done
[PYBOOT] [wandboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:49]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:50]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter