Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20140910/
Failed boards:
apc arm-vt8500_v6_v7_defconfig : BUILD FAILED colombus arm-sunxi_defconfig : BUILD FAILED colombus arm-multi_v7_defconfig : FAILED 1:56.57 colombus arm-multi_lpae_defconfig : FAILED 1:56.10 cubie arm-sunxi_defconfig : BUILD FAILED cubie2 arm-sunxi_defconfig : BUILD FAILED cubie2 arm-multi_v7_defconfig : FAILED 3:10.09 cubie2 arm-multi_lpae_defconfig : FAILED 3:02.35 odroidu3 arm-exynos_defconfig : FAILED 1:03.84
Successful boards:
arndale arm-exynos_defconfig : passed 1:45.13 arndale arm-multi_v7_defconfig : passed 1:24.96 arndale arm-multi_lpae_defconfig : passed 1:24.40 bbb arm-omap2plus_defconfig : passed 1:34.19 bbb arm-multi_v7_defconfig : passed 1:11.96 beaver arm-tegra_defconfig : passed 1:06.58 beaver arm-multi_v7_defconfig : passed 0:55.53 capri arm-bcm_defconfig : passed 0:40.44 capri arm-multi_v7_defconfig : passed 0:41.44 cubie arm-multi_v7_defconfig : passed 1:09.65 cubox arm-multi_v7_defconfig : passed 1:10.35 dalmore arm-tegra_defconfig : passed 1:20.36 dalmore arm-multi_v7_defconfig : passed 1:15.29 hummingboard arm-imx_v6_v7_defconfig : passed 1:25.05 hummingboard arm-multi_v7_defconfig : passed 1:15.35 jetsontk1 arm-tegra_defconfig : passed 1:11.03 jetsontk1 arm-multi_v7_defconfig : passed 1:00.54 jetsontk1 arm-multi_lpae_defconfig : passed 0:59.19 omap5uevm arm-omap2plus_defconfig : warnings 1:05.14 omap5uevm arm-multi_v7_defconfig : warnings 1:04.86 omap5uevm arm-multi_lpae_defconfig : warnings 1:12.64 pandaes arm-omap2plus_defconfig : warnings 1:33.24 pandaes arm-multi_v7_defconfig : passed 1:34.18 pi arm-exynos_defconfig : passed 0:56.50 pi arm-multi_v7_defconfig : passed 1:54.97 pi arm-multi_lpae_defconfig : passed 0:44.98 pit arm-exynos_defconfig : passed 1:05.14 pit arm-multi_v7_defconfig : passed 0:50.67 pit arm-multi_lpae_defconfig : passed 0:45.38 sama5 arm-sama5_defconfig : passed 1:56.27 seaboard arm-tegra_defconfig : passed 1:17.53 seaboard arm-multi_v7_defconfig : passed 1:08.42 snow arm-exynos_defconfig : passed 1:02.88 snow arm-multi_v7_defconfig : passed 1:00.82 snow arm-multi_lpae_defconfig : passed 0:57.31 snowball arm-u8500_defconfig : passed 2:33.84 snowball arm-multi_v7_defconfig : passed 2:16.83 trimslice arm-tegra_defconfig : passed 1:06.10 trimslice arm-multi_v7_defconfig : passed 1:00.06 wandboard arm-imx_v6_v7_defconfig : passed 1:11.21 wandboard arm-multi_v7_defconfig : passed 1:03.70
Offline boards:
dalmore arm-multi_lpae_defconfig : OFFLINE 1:23.77
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.521198] can: netlink gateway (rev 20130117) max_hops=1 [ 1.527289] Key type dns_resolver registered [ 1.531880] ThumbEE CPU extension supported. [ 1.536325] Registering SWP/SWPB emulation handler [ 1.542554] usb2-vbus: 5000 mV [ 1.547407] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.555509] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.561341] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.569602] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.584432] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.591614] hub 1-0:1.0: USB hub found [ 1.595562] hub 1-0:1.0: 1 port detected [ 1.600443] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.612202] vcc3v3: disabling [ 1.615289] vcc3v0: disabling [ 1.618478] ALSA device list: [ 1.621558] No soundcards found. [ 1.625921] Waiting for root device /dev/mmcblk0p1... [ 1.916314] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 2.058996] hub 1-1:1.0: USB hub found [ 2.063240] hub 1-1:1.0: 4 ports detected [ 2.346997] usb 1-1.1: new full-speed USB device number 3 using ehci-platform [ 2.424772] usb 1-1.1: device descriptor read/64, error -32 [ 2.611442] usb 1-1.1: device descriptor read/64, error -32 [ 2.798106] usb 1-1.1: new full-speed USB device number 4 using ehci-platform [ 2.875883] usb 1-1.1: device descriptor read/64, error -32 [ 3.062549] usb 1-1.1: device descriptor read/64, error -32 [ 3.249217] usb 1-1.1: new full-speed USB device number 5 using ehci-platform [ 3.679259] usb 1-1.1: device not accepting address 5, error -32 [ 3.757366] usb 1-1.1: new full-speed USB device number 6 using ehci-platform [ 4.187411] usb 1-1.1: device not accepting address 6, error -32 [ 4.193958] usb 1-1-port1: unable to enumerate USB device [ 42.029251] random: nonblocking pool is initialized
[PYBOOT] [colombus 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:54]: got exception: timeout ~$off
[PYBOOT] [colombus 01:55]: Done.
========================================================================
Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 7.144454] hub 1-1:1.0: 4 ports detected [ 7.428472] usb 1-1.1: new full-speed USB device number 18 using ehci-platform [ 7.506249] usb 1-1.1: device descriptor read/64, error -32 [ 7.692914] usb 1-1.1: device descriptor read/64, error -32 [ 7.879584] usb 1-1.1: new full-speed USB device number 19 using ehci-platform [ 7.904345] hub 1-1:1.0: hub_port_status failed (err = -71) [ 7.914322] usb 1-1-port1: cannot reset (err = -71) [ 7.923526] usb 1-1-port1: cannot reset (err = -71) [ 7.932729] usb 1-1-port1: cannot reset (err = -71) [ 7.941933] usb 1-1-port1: cannot reset (err = -71) [ 7.946990] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad? [ 7.957877] usb 1-1-port1: cannot disable (err = -71) [ 7.967341] usb 1-1-port1: cannot reset (err = -71) [ 7.976544] usb 1-1-port1: cannot reset (err = -71) [ 7.985748] usb 1-1-port1: cannot reset (err = -71) [ 7.994952] usb 1-1-port1: cannot reset (err = -71) [ 8.004155] usb 1-1-port1: cannot reset (err = -71) [ 8.009212] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad? [ 8.020100] usb 1-1-port1: cannot disable (err = -71) [ 8.029563] usb 1-1-port1: cannot reset (err = -71) [ 8.038767] usb 1-1-port1: cannot reset (err = -71) [ 8.047971] usb 1-1-port1: cannot reset (err = -71) [ 8.057175] usb 1-1-port1: cannot reset (err = -71) [ 8.066378] usb 1-1-port1: cannot reset (err = -71) [ 8.071435] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad? [ 8.082323] usb 1-1-port1: cannot disable (err = -71) [ 8.087562] usb 1-1-port1: unable to enumerate USB device [ 8.097360] usb 1-1-port1: cannot disable (err = -71) [ 8.106826] hub 1-1:1.0: hub_port_status failed (err = -71) [ 8.112674] usb 1-1: USB disconnect, device number 17 [ 8.118006] hub 1-1:1.0: hub_port_status failed (err = -71) [ 8.366717] usb 1-1: new high-speed USB device number 22 using ehci-platform [ 27.106156] random: nonblocking pool is initialized
[PYBOOT] [colombus 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:54]: got exception: timeout ~$off
[PYBOOT] [colombus 01:56]: Done.
========================================================================
Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.473785] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.538007] hub 3-0:1.0: USB hub found [ 1.541847] hub 3-0:1.0: 1 port detected [ 1.546996] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.553725] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.562083] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.623040] hub 4-0:1.0: USB hub found [ 1.626891] hub 4-0:1.0: 1 port detected [ 1.631655] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.719064] RX IPC Checksum Offload disabled [ 1.723450] No MAC Management Counters available [ 1.728366] ata1: SATA link down (SStatus 0 SControl 300) [ 1.743187] Sending DHCP requests . [ 3.708389] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.193154] .., OK [ 8.488629] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.105 [ 8.496467] IP-Config: Complete: [ 8.499720] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.105, mask=255.255.255.0, gw=172.16.1.1 [ 8.509716] host=172.16.1.105, domain=lixom.net, nis-domain=(none) [ 8.516329] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 8.522856] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 8.531037] vcc3v3: disabling [ 8.534015] vcc3v0: disabling [ 8.537100] ALSA device list: [ 8.540079] No soundcards found. [ 8.549406] VFS: Mounted root (nfs filesystem) on device 0:12. [ 8.555840] devtmpfs: mounted [ 8.559605] Freeing unused kernel memory: 708K (c0b63000 - c0c14000)
[PYBOOT] [cubie2 00:29]: kernel: finished booting, starting userspace. [ 20.163173] nfs: server 172.16.1.7 not responding, still trying [ 20.169115] nfs: server 172.16.1.7 not responding, still trying [ 22.378174] nfs: server 172.16.1.7 not responding, still trying
[PYBOOT] [cubie2 02:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 03:00]: got exception: timeout ~$off
[PYBOOT] [cubie2 03:01]: Done.
========================================================================
Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.473856] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.538085] hub 3-0:1.0: USB hub found [ 1.541932] hub 3-0:1.0: 1 port detected [ 1.547081] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.553805] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.562138] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.623104] hub 4-0:1.0: USB hub found [ 1.626955] hub 4-0:1.0: 1 port detected [ 1.631720] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:20 UTC (20) [ 1.719123] RX IPC Checksum Offload disabled [ 1.723508] No MAC Management Counters available [ 1.728425] ata1: SATA link down (SStatus 0 SControl 300) [ 1.743250] Sending DHCP requests . [ 3.708447] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.343213] .., OK [ 13.203685] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.105 [ 13.211514] IP-Config: Complete: [ 13.214768] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.105, mask=255.255.255.0, gw=172.16.1.1 [ 13.224763] host=172.16.1.105, domain=lixom.net, nis-domain=(none) [ 13.231376] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 13.237901] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 13.246073] vcc3v3: disabling [ 13.249047] vcc3v0: disabling [ 13.252131] ALSA device list: [ 13.255108] No soundcards found. [ 13.264581] VFS: Mounted root (nfs filesystem) on device 0:12. [ 13.271020] devtmpfs: mounted [ 13.274777] Freeing unused kernel memory: 708K (c0b63000 - c0c14000)
[PYBOOT] [cubie2 00:37]: kernel: finished booting, starting userspace. [ 24.883230] nfs: server 172.16.1.7 not responding, still trying [ 24.889173] nfs: server 172.16.1.7 not responding, still trying [ 27.098232] nfs: server 172.16.1.7 not responding, still trying
[PYBOOT] [cubie2 03:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 03:08]: got exception: timeout ~$off
[PYBOOT] [cubie2 03:09]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
dhcp Unknown command 'dhcp' - try 'help' Exynos4412 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Exynos4412 # tftp 0x40008000 tmp/odroidu3-WHN50y/zImagexr0og0 tftp 0x40008000 tmp/odroidu3-WHN50y/zImagexr0og0 Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.187 Filename 'tmp/odroidu3-WHN50y/zImagexr0og0'. Load address: 0x40008000 Loading: *EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ########################## 105.5 KiB/s done Bytes transferred = 3242558 (317a3e hex) Exynos4412 # bootz 0x40008000 ; bootm 0x40008000
[PYBOOT] [odroidu3 00:25]: u-boot: jumping to kernel image bootz 0x40008000 ; bootm 0x40008000 Unknown command 'bootz' - try 'help' Boot with zImage
Starting kernel ...
[PYBOOT] [odroidu3 00:25]: u-boot: started kernel.
[PYBOOT] [odroidu3 01:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:01]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:02]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter