Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-rc7-1023-g83e0a16/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:53.86 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.94 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:47.78 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:59.16 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.35 cosmic arm-multi_v7_defconfig : FAILED 2:09.28 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:51.92 dalmore arm-multi_v7_defconfig : FAILED 2:00.02 dalmore arm-multi_lpae_defconfig : FAILED 2:02.62 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.69 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.98 omap5uevm arm-multi_lpae_defconfig : FAILED 2:09.32 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:54.12 pi arm-multi_lpae_defconfig : FAILED 1:50.25 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:52.42 seaboard arm-multi_v7_defconfig : FAILED 1:56.02 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.49 snowball arm-multi_v7_defconfig : FAILED 2:07.21 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:14.07 arndale arm-exynos_defconfig : passed 1:30.11 arndale arm-multi_v7_defconfig : passed 1:19.56 arndale arm-multi_lpae_defconfig : passed 1:27.50 capri arm-bcm_defconfig : passed 0:51.12 capri arm-multi_v7_defconfig : passed 0:54.52 chitra powerpc-ppc64_defconfig : passed 2:10.99 colombus arm-sunxi_defconfig : passed 2:24.43 colombus arm-multi_v7_defconfig : passed 2:32.88 colombus arm-multi_lpae_defconfig : passed 2:34.79 cubie arm-sunxi_defconfig : passed 0:55.03 cubie arm-multi_v7_defconfig : passed 0:55.00 cubie2 arm-sunxi_defconfig : passed 0:49.34 cubie2 arm-multi_v7_defconfig : passed 0:55.26 cubie2 arm-multi_lpae_defconfig : passed 0:57.10 cubox arm-multi_v7_defconfig : passed 1:05.76 cubox arm-mvebu_v7_defconfig : passed 1:03.29 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.41 hummingboard arm-multi_v7_defconfig : passed 1:23.84 jetsontk1 arm-tegra_defconfig : warnings 0:52.50 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.96 jetsontk1 arm-multi_lpae_defconfig : warnings 0:53.39 omap5uevm arm-omap2plus_defconfig : passed 1:08.72 pandaes arm-omap2plus_defconfig : warnings 1:37.96 pandaes arm-multi_v7_defconfig : passed 1:50.98 pi arm-exynos_defconfig : passed 2:19.22 pit arm-exynos_defconfig : passed 2:09.58 pit arm-multi_v7_defconfig : passed 2:18.81 pit arm-multi_lpae_defconfig : passed 2:16.22 seattle arm64-defconfig : warnings 2:21.56 snow arm-exynos_defconfig : passed 2:08.29 snow arm-multi_v7_defconfig : passed 1:59.55 snow arm-multi_lpae_defconfig : passed 1:58.50 trimslice arm-tegra_defconfig : warnings 2:45.19 trimslice arm-multi_v7_defconfig : warnings 1:42.12 wandboard arm-imx_v6_v7_defconfig : passed 1:20.13 wandboard arm-multi_v7_defconfig : passed 1:15.39

Offline boards:

bbb arm-multi_v7_defconfig : OFFLINE 1:39.60 beaver arm-tegra_defconfig : OFFLINE 2:12.77 beaver arm-multi_v7_defconfig : OFFLINE 2:21.61 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.99 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:20.53 parallella arm-multi_v7_defconfig : OFFLINE 2:27.82 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.87 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:44.85 sama5 arm-sama5_defconfig : OFFLINE 2:18.05 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:13.23 socfpga arm-socfpga_defconfig : OFFLINE 2:25.74 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.74

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.029187] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.035303] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.041628] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.048517] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.058112] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.067611] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.074627] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.118097] ledtrig-cpu: registered to indicate activity on CPUs [ 2.126753] oprofile: using arm/armv7 [ 2.131853] Initializing XFRM netlink socket [ 2.136935] NET: Registered protocol family 10 [ 2.147683] sit: IPv6 over IPv4 tunneling driver [ 2.156376] NET: Registered protocol family 17 [ 2.161302] NET: Registered protocol family 15 [ 2.166527] Key type dns_resolver registered [ 2.171465] omap_voltage_late_init: Voltage driver support not added [ 2.178205] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.186670] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.196913] ThumbEE CPU extension supported. [ 2.201568] Registering SWP/SWPB emulation handler [ 2.206601] SmartReflex Class3 initialized [ 2.275919] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.283205] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.293686] mmc1: new high speed MMC card at address 0001 [ 2.305718] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.313997] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.321731] hctosys: unable to open rtc device (rtc0) [ 2.327049] sr_init: No PMIC hook to init smartreflex [ 2.332828] sr_init: platform driver register failed for SR [ 2.372557] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.380512] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.394738] mmcblk1: p1 p2 [ 2.411859] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.168777] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.175862] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.201248] rtc-ds1307 2-006f: SET TIME! [ 2.206973] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.213722] rtc-ds1307 2-006f: 64 bytes nvram [ 2.218338] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.226554] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.232338] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.240573] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.249738] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.256613] hub 1-0:1.0: USB hub found [ 2.260565] hub 1-0:1.0: 1 port detected [ 2.264986] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.270766] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.278885] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.287895] hub 2-0:1.0: USB hub found [ 2.291867] hub 2-0:1.0: 1 port detected [ 2.297932] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.331858] vdd_3v3: supplied by regen1 [ 2.370082] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.387609] aic_dvdd_fixed: disabling [ 2.392351] Waiting for root device /dev/mmcblk0p1... [ 2.412881] mmc1: new high speed MMC card at address 0001 [ 2.418852] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.423742] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.430083] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.436958] mmcblk1: p1 [ 2.570750] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.605817] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.630989] hub 2-1:1.0: USB hub found [ 2.634970] hub 2-1:1.0: 4 ports detected [ 2.727013] hub 1-1:1.0: USB hub found [ 2.730999] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:57]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:58]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.158766] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.165845] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191213] rtc-ds1307 2-006f: SET TIME! [ 2.196958] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.203713] rtc-ds1307 2-006f: 64 bytes nvram [ 2.208331] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.216566] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.222347] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.230595] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.239764] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.246658] hub 1-0:1.0: USB hub found [ 2.250623] hub 1-0:1.0: 1 port detected [ 2.255034] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.260817] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.268945] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.277959] hub 2-0:1.0: USB hub found [ 2.281933] hub 2-0:1.0: 1 port detected [ 2.288015] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.321816] vdd_3v3: supplied by regen1 [ 2.360034] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.377639] aic_dvdd_fixed: disabling [ 2.382393] Waiting for root device /dev/mmcblk0p1... [ 2.422748] mmc1: new high speed MMC card at address 0001 [ 2.428734] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.433641] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.439982] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446859] mmcblk1: p1 [ 2.560717] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.595782] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.621050] hub 2-1:1.0: USB hub found [ 2.625028] hub 2-1:1.0: 4 ports detected [ 2.717076] hub 1-1:1.0: USB hub found [ 2.721060] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.638141] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.645016] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.655406] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.660270] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.666564] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.673429] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.683035] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.692536] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.699603] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.747579] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.753878] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.760756] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.770352] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.779852] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.786895] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.793018] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.799333] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.806177] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.815783] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.825291] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.832335] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.838988] vdd_3v3: supplied by regen1 [ 2.877849] hctosys: unable to open rtc device (rtc0) [ 2.883164] sr_init: No PMIC hook to init smartreflex [ 2.888720] sr_init: platform driver register failed for SR [ 2.937062] aic_dvdd_fixed: disabling [ 2.941257] ldousb: disabling [ 2.944479] mmc1: new high speed MMC card at address 0001 [ 2.952528] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.957908] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.964862] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.973302] mmcblk1: p1 [ 2.980589] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.485828] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.560070] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.570391] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.644577] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.654896] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.729127] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.739446] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.813633] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.823955] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.898200] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.908528] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.982724] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.993051] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.067307] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.077653] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.151839] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.162157] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.236394] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.246709] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.320938] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.331253] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.405486] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.415807] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.490035] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.500353] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.574529] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.584845] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.659075] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.669400] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.743590] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.753911] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.828150] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.838471] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.091498] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.165482] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.175558] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.249543] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.259618] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.333599] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.343679] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.417658] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.427738] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.501718] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.511800] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.585787] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.595853] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.669842] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.679914] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.753890] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.763956] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.837937] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.848008] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.922036] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.932104] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.006082] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.016171] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.090163] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.100239] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.174220] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.184290] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.258273] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.268351] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.342335] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.352411] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.426388] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.436463] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:08]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.685734] Key type dns_resolver registered [ 2.692200] ThumbEE CPU extension supported. [ 2.696617] Registering SWP/SWPB emulation handler [ 2.729427] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.736521] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.746363] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.761761] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.768539] [drm] No driver support for vblank timestamp query. [ 2.784067] mmc1: new high speed MMC card at address 0001 [ 2.793896] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.802007] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.810548] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.820042] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.830405] mmcblk1: p1 [ 2.947468] Console: switching to colour frame buffer device 240x75 [ 3.035090] drm drm: fb0: frame buffer device [ 3.053290] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.063373] usb2_vbus: supplied by vdd-sys-5v0 [ 3.075133] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.080735] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.089508] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.103303] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.113590] hub 1-0:1.0: USB hub found [ 3.117598] hub 1-0:1.0: 1 port detected [ 3.128260] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.142527] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.203776] dvdd_ts: disabling [ 3.206888] usb1_vbus: disabling [ 3.210285] vdd_cam_1v8_reg: disabling [ 3.217835] Waiting for root device /dev/mmcblk0p1... [ 3.433325] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.410837] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.545040] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:00]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:02]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.686496] Key type dns_resolver registered [ 2.692961] ThumbEE CPU extension supported. [ 2.697379] Registering SWP/SWPB emulation handler [ 2.730136] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.737108] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.746667] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.763750] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.770490] [drm] No driver support for vblank timestamp query. [ 2.790424] mmc1: new high speed MMC card at address 0001 [ 2.797945] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.803754] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.813328] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.821497] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.833108] mmcblk1: p1 [ 2.949715] Console: switching to colour frame buffer device 240x75 [ 3.037244] drm drm: fb0: frame buffer device [ 3.058703] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.068921] usb2_vbus: supplied by vdd-sys-5v0 [ 3.080640] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.086288] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.095080] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.108738] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.119293] hub 1-0:1.0: USB hub found [ 3.123289] hub 1-0:1.0: 1 port detected [ 3.133330] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.147199] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.209329] dvdd_ts: disabling [ 3.212431] usb1_vbus: disabling [ 3.215804] vdd_cam_1v8_reg: disabling [ 3.223100] Waiting for root device /dev/mmcblk0p1... [ 3.433746] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.411582] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.248696] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.857935] Bluetooth: RFCOMM ver 1.11 [ 2.861869] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.867264] Bluetooth: BNEP socket layer initialized [ 2.872350] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.878347] Bluetooth: HIDP socket layer initialized [ 2.885257] Key type dns_resolver registered [ 2.894826] Registering SWP/SWPB emulation handler [ 2.927240] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.933720] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.944668] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.968579] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.975386] [drm] No driver support for vblank timestamp query. [ 3.153865] Console: switching to colour frame buffer device 240x75 [ 3.241226] drm drm: fb0: frame buffer device [ 3.270606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.277824] usb2_vbus: supplied by vdd-sys-5v0 [ 3.287213] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.293014] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.302120] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.320611] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.334129] hub 1-0:1.0: USB hub found [ 3.338110] hub 1-0:1.0: 1 port detected [ 3.352459] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.366558] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.453300] dvdd_ts: disabling [ 3.456452] usb1_vbus: disabling [ 3.459716] vdd_cam_1v8_reg: disabling [ 3.464503] ALSA device list: [ 3.467497] #0: NVIDIA Tegra Dalmore [ 3.473342] Waiting for root device /dev/mmcblk0p1... [ 3.660601] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.695292] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.335860] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:51]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.652712] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661630] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.692756] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.693831] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.701891] usbcore: registered new interface driver usbhid [ 1.703896] usbhid: USB HID core driver [ 1.712397] NET: Registered protocol family 10 [ 1.713018] sit: IPv6 over IPv4 tunneling driver [ 1.717888] NET: Registered protocol family 17 [ 1.721145] NET: Registered protocol family 15 [ 1.725639] Key type dns_resolver registered [ 1.729952] Registering SWP/SWPB emulation handler [ 1.735782] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740359] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.759264] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.763534] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.768274] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770491] max98090 1-0010: use default 2.8v micbias [ 1.782991] mmc1: new DDR MMC card at address 0001 [ 1.788484] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.789882] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.792866] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.805173] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.811108] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.816929] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.823495] mmcblk1: p1 p2 [ 1.833236] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.852450] VDD10_HDMI_1.0V: disabling [ 1.853152] vdd_g3d: disabling [ 1.854219] BUCK8_2.8V: disabling [ 1.858220] ALSA device list: [ 1.859840] #0: Odroid-U3 [ 1.863553] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.764886] usbcore: registered new interface driver usbhid [ 1.770717] usbhid: USB HID core driver [ 1.779383] NET: Registered protocol family 10 [ 1.784312] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.791466] sit: IPv6 over IPv4 tunneling driver [ 1.796806] NET: Registered protocol family 17 [ 1.801484] can: controller area network core (rev 20120528 abi 9) [ 1.808037] NET: Registered protocol family 29 [ 1.812722] can: raw protocol (rev 20120528) [ 1.817234] can: broadcast manager protocol (rev 20120528 t) [ 1.823195] can: netlink gateway (rev 20130117) max_hops=1 [ 1.829260] Key type dns_resolver registered [ 1.833854] omap_vc_init_channel: No PMIC info for vdd_core [ 1.839715] omap_vp_init: No PMIC info for vdd_core [ 1.844854] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.850536] omap_vp_init: No PMIC info for vdd_mm [ 1.855474] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.861217] omap_vp_init: No PMIC info for vdd_mpu [ 1.866760] Power Management for TI OMAP4+ devices. [ 1.871995] ThumbEE CPU extension supported. [ 1.876482] Registering SWP/SWPB emulation handler [ 1.883552] palmas 0-0048: Irq flag is 0x00000000 [ 1.906719] mmc0: new high speed MMC card at address 0001 [ 1.912715] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.917638] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.924010] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.933028] smsc95xx v1.0.4 [ 1.936663] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.947526] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.988089] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.997302] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 9a:bb:87:c3:07:82 [ 2.012837] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.053887] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ [PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.764749] usbcore: registered new interface driver usbhid [ 1.770581] usbhid: USB HID core driver [ 1.779215] NET: Registered protocol family 10 [ 1.784152] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.791294] sit: IPv6 over IPv4 tunneling driver [ 1.796555] NET: Registered protocol family 17 [ 1.801224] can: controller area network core (rev 20120528 abi 9) [ 1.807734] NET: Registered protocol family 29 [ 1.812390] can: raw protocol (rev 20120528) [ 1.816854] can: broadcast manager protocol (rev 20120528 t) [ 1.822783] can: netlink gateway (rev 20130117) max_hops=1 [ 1.828810] Key type dns_resolver registered [ 1.833373] omap_vc_init_channel: No PMIC info for vdd_core [ 1.839202] omap_vp_init: No PMIC info for vdd_core [ 1.844306] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.849956] omap_vp_init: No PMIC info for vdd_mm [ 1.854878] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.860614] omap_vp_init: No PMIC info for vdd_mpu [ 1.866152] Power Management for TI OMAP4+ devices. [ 1.871389] ThumbEE CPU extension supported. [ 1.875886] Registering SWP/SWPB emulation handler [ 1.883031] palmas 0-0048: Irq flag is 0x00000000 [ 1.909710] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.920458] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.944409] mmc0: new high speed MMC card at address 0001 [ 1.950404] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.955303] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.961647] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.984429] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.007720] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.013737] smsc95xx v1.0.4 [ 2.049037] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.056987] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.067030] Unable to handle kernel paging reque[ d e r e2.f0e7re1nce at virtual address [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.539897] isl29018 7-0044: No cache defaults, reading back from HW [ 1.546244] isl29018 7-0044: Failed to read 1: -6 [ 1.550827] isl29018 7-0044: regmap initialization fails: -6 [ 1.561687] NET: Registered protocol family 10 [ 1.566137] sit: IPv6 over IPv4 tunneling driver [ 1.569720] NET: Registered protocol family 17 [ 1.573720] can: controller area network core (rev 20120528 abi 9) [ 1.579906] NET: Registered protocol family 29 [ 1.584298] can: raw protocol (rev 20120528) [ 1.588547] can: broadcast manager protocol (rev 20120528 t) [ 1.594189] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599923] Key type dns_resolver registered [ 1.604252] ThumbEE CPU extension supported. [ 1.608156] Registering SWP/SWPB emulation handler [ 1.617344] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622833] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629189] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634564] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644678] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.650904] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.663935] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.669606] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.675788] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681150] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.690866] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.712930] Waiting for root device /dev/mmcblk0p1... [ 1.716739] mmc0: tuning execution failed: -5 [ 1.720865] mmc0: error -5 whilst initialising MMC card [ 2.584610] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597980] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603439] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609809] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615194] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:48]: got exception: timeout ~$off

[PYBOOT] [pi 01:49]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.540391] isl29018 7-0044: No cache defaults, reading back from HW [ 1.546736] isl29018 7-0044: Failed to read 1: -6 [ 1.551321] isl29018 7-0044: regmap initialization fails: -6 [ 1.562225] NET: Registered protocol family 10 [ 1.566679] sit: IPv6 over IPv4 tunneling driver [ 1.570274] NET: Registered protocol family 17 [ 1.574267] can: controller area network core (rev 20120528 abi 9) [ 1.580452] NET: Registered protocol family 29 [ 1.584845] can: raw protocol (rev 20120528) [ 1.589094] can: broadcast manager protocol (rev 20120528 t) [ 1.594736] can: netlink gateway (rev 20130117) max_hops=1 [ 1.600470] Key type dns_resolver registered [ 1.604805] ThumbEE CPU extension supported. [ 1.608704] Registering SWP/SWPB emulation handler [ 1.617931] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.623424] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629779] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.635154] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.645271] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654854] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660300] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670484] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676666] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682044] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691766] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.713970] Waiting for root device /dev/mmcblk0p1... [ 1.717813] mmc0: tuning execution failed: -5 [ 1.721907] mmc0: error -5 whilst initialising MMC card [ 2.585118] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598532] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603997] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.610364] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615749] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:52]: got exception: timeout ~$off

[PYBOOT] [pi 01:53]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.836480] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.847017] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.853607] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.859108] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.867021] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.897098] mmc2: switch to bus width 8 failed [ 1.901884] mmc2: switch to bus width 4 failed [ 1.906367] mmc2: new high speed MMC card at address 0001 [ 1.912483] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.913138] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.921433] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.924407] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.928146] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.932423] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.934437] hub 3-0:1.0: USB hub found [ 1.934499] hub 3-0:1.0: 1 port detected [ 1.940499] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.940503] [drm] No driver support for vblank timestamp query. [ 1.965953] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.972420] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.984055] mmcblk2: p3 [ 1.987095] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.992640] mmc0: new SDIO card at address 0001 [ 2.053314] Console: switching to colour frame buffer device 170x48 [ 2.094661] drm drm: fb0: frame buffer device [ 2.113852] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.120995] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.128247] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.143946] vdd_1v5: disabling [ 2.147020] vdd_1v2: disabling [ 2.808110] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.819500] Waiting for root device /dev/mmcblk0p3... [ 58.753926] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:55]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.762278] Bluetooth: RFCOMM ver 1.11 [ 1.762316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.762344] Bluetooth: BNEP socket layer initialized [ 1.762355] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.762380] Bluetooth: HIDP socket layer initialized [ 1.762913] Key type dns_resolver registered [ 1.763988] Registering SWP/SWPB emulation handler [ 1.789651] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.790213] VDDIO_HDMI: supplied by vdd_5v0 [ 1.790473] vdd_sys: supplied by vdd_5v0 [ 1.790562] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.790815] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.791363] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.795317] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.795349] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.795412] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.795919] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.818512] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.821460] hub 3-0:1.0: USB hub found [ 1.821520] hub 3-0:1.0: 1 port detected [ 1.834642] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.834645] [drm] No driver support for vblank timestamp query. [ 1.948323] Console: switching to colour frame buffer device 170x48 [ 1.968245] drm drm: fb0: frame buffer device [ 1.998501] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.005608] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.024195] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.043184] vdd_1v5: disabling [ 2.046236] vdd_1v2: disabling [ 2.049435] ALSA device list: [ 2.052395] #0: NVIDIA Tegra Seaboard [ 2.467915] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.479142] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:51]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.922088] ledtrig-cpu: registered to indicate activity on CPUs [ 1.928588] usbcore: registered new interface driver usbhid [ 1.934173] usbhid: USB HID core driver [ 1.944000] NET: Registered protocol family 10 [ 1.949523] sit: IPv6 over IPv4 tunneling driver [ 1.954864] NET: Registered protocol family 17 [ 1.959350] can: controller area network core (rev 20120528 abi 9) [ 1.965606] NET: Registered protocol family 29 [ 1.970092] can: raw protocol (rev 20120528) [ 1.974365] can: broadcast manager protocol (rev 20120528 t) [ 1.980041] can: netlink gateway (rev 20130117) max_hops=1 [ 1.986114] Key type dns_resolver registered [ 1.990661] ThumbEE CPU extension supported. [ 1.994934] Registering SWP/SWPB emulation handler [ 2.005828] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.012695] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.021972] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.028991] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.035980] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.042968] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.056823] db8500-esram12: disabling [ 2.060607] db8500-esram34: disabling [ 2.064636] V-CSI/DSI: disabling [ 2.067932] mmci-reg: disabling [ 2.071685] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.077667] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.084136] Waiting for root device /dev/mmcblk0p4... [ 2.123901] mmc3: new high speed MMC card at address 0001 [ 2.129882] mmcblk3: mmc3:0001 3.53 GiB [ 2.134155] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.139801] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.145477] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.151977] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:05]: got exception: timeout ~$off

[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.692169] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.698669] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.714233] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.724975] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.734924] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.745635] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.769226] NET: Registered protocol family 10 [ 2.775329] sit: IPv6 over IPv4 tunneling driver [ 2.781524] NET: Registered protocol family 17 [ 2.786041] NET: Registered protocol family 35 [ 2.790588] NET: Registered protocol family 37 [ 2.795135] Registering SWP/SWPB emulation handler [ 2.801483] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.807647] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.814300] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.826324] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-23 12:57:42 UTC (956494662) [ 2.835693] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.842712] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.849700] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.856719] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.870330] db8500-esram12: disabling [ 2.874084] db8500-esram34: disabling [ 2.878021] V-CSI/DSI: disabling [ 2.881317] mmci-reg: disabling [ 2.884613] ALSA device list: [ 2.887573] #0: MOP500-card [ 2.890930] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.896881] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.903076] Waiting for root device /dev/mmcblk0p4... [ 78.140228] random: nonblocking pool is initialized

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>": cu: Got hangup signal Connected. cu: waitpid: No child processes

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done.