Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-119-g49817c3/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:55.13 bbb arm-multi_v7_defconfig : FAILED 1:54.32 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.31 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:45.17 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.34 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.62 cosmic arm-multi_v7_defconfig : FAILED 2:06.52 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.22 dalmore arm-multi_v7_defconfig : FAILED 1:59.97 dalmore arm-multi_lpae_defconfig : FAILED 1:54.25 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.96 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.76 omap5uevm arm-multi_lpae_defconfig : FAILED 0:49.65 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:55.64 pi arm-multi_lpae_defconfig : FAILED 1:46.95 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:48.51 seaboard arm-multi_v7_defconfig : FAILED 2:07.48 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.29 snowball arm-multi_v7_defconfig : FAILED 2:12.09 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.09 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.77 arndale arm-exynos_defconfig : passed 1:37.49 arndale arm-multi_v7_defconfig : passed 1:25.85 arndale arm-multi_lpae_defconfig : passed 1:14.87 capri arm-bcm_defconfig : passed 0:45.06 capri arm-multi_v7_defconfig : passed 0:56.25 chitra powerpc-ppc64_defconfig : passed 3:07.12 colombus arm-sunxi_defconfig : passed 2:17.99 colombus arm-multi_v7_defconfig : passed 2:32.48 colombus arm-multi_lpae_defconfig : passed 2:25.19 cubie arm-sunxi_defconfig : passed 0:51.02 cubie arm-multi_v7_defconfig : passed 0:52.59 cubie2 arm-sunxi_defconfig : passed 0:53.62 cubie2 arm-multi_v7_defconfig : passed 0:56.05 cubie2 arm-multi_lpae_defconfig : passed 0:56.58 cubox arm-multi_v7_defconfig : passed 1:08.94 cubox arm-mvebu_v7_defconfig : passed 1:20.37 hummingboard arm-imx_v6_v7_defconfig : passed 1:41.91 hummingboard arm-multi_v7_defconfig : passed 1:17.45 jetsontk1 arm-tegra_defconfig : passed 1:35.23 jetsontk1 arm-multi_v7_defconfig : passed 1:36.51 jetsontk1 arm-multi_lpae_defconfig : passed 1:34.62 omap5uevm arm-omap2plus_defconfig : passed 1:04.95 pandaes arm-omap2plus_defconfig : warnings 1:33.99 pandaes arm-multi_v7_defconfig : passed 1:50.69 pi arm-exynos_defconfig : passed 2:14.72 pit arm-exynos_defconfig : passed 2:14.44 pit arm-multi_v7_defconfig : passed 2:13.83 pit arm-multi_lpae_defconfig : passed 2:16.60 seattle arm64-defconfig : warnings 2:22.03 snow arm-exynos_defconfig : passed 2:06.69 snow arm-multi_v7_defconfig : passed 2:02.42 snow arm-multi_lpae_defconfig : passed 1:58.21 trimslice arm-tegra_defconfig : passed 1:30.97 trimslice arm-multi_v7_defconfig : passed 1:38.16 wandboard arm-multi_v7_defconfig : passed 1:16.33
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.91 beaver arm-multi_v7_defconfig : OFFLINE 2:17.43 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.97 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:25.19 parallella arm-multi_v7_defconfig : OFFLINE 2:19.57 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.57 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.53 sama5 arm-sama5_defconfig : OFFLINE 2:18.42 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:17.38 socfpga arm-socfpga_defconfig : OFFLINE 2:24.99 socfpga arm-multi_v7_defconfig : OFFLINE 2:15.46
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.632934] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.643250] ledtrig-cpu: registered to indicate activity on CPUs [ 1.650322] usbcore: registered new interface driver usbhid [ 1.656245] usbhid: USB HID core driver [ 1.668374] NET: Registered protocol family 10 [ 1.674946] sit: IPv6 over IPv4 tunneling driver [ 1.681112] NET: Registered protocol family 17 [ 1.685880] can: controller area network core (rev 20120528 abi 9) [ 1.692515] NET: Registered protocol family 29 [ 1.697237] can: raw protocol (rev 20120528) [ 1.701759] can: broadcast manager protocol (rev 20120528 t) [ 1.707758] can: netlink gateway (rev 20130117) max_hops=1 [ 1.714522] Key type dns_resolver registered [ 1.719433] omap_voltage_late_init: Voltage driver support not added [ 1.727690] ThumbEE CPU extension supported. [ 1.732319] Registering SWP/SWPB emulation handler [ 1.774437] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780977] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.788754] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.797438] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.805367] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.813199] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821018] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.828366] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.837038] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.844956] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.854678] mmc1: new high speed MMC card at address 0001 [ 1.861920] hctosys: unable to open rtc device (rtc0) [ 1.874844] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.880852] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.887918] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.896881] mmcblk1: p1 p2 [ 1.902642] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.078152] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.084271] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.090598] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.097473] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.107067] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.116563] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.123580] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.166881] ledtrig-cpu: registered to indicate activity on CPUs [ 2.175626] oprofile: using arm/armv7 [ 2.180763] Initializing XFRM netlink socket [ 2.185852] NET: Registered protocol family 10 [ 2.196832] sit: IPv6 over IPv4 tunneling driver [ 2.205726] NET: Registered protocol family 17 [ 2.210689] NET: Registered protocol family 15 [ 2.215949] Key type dns_resolver registered [ 2.220887] omap_voltage_late_init: Voltage driver support not added [ 2.227631] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.236172] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.246617] ThumbEE CPU extension supported. [ 2.251161] Registering SWP/SWPB emulation handler [ 2.256279] SmartReflex Class3 initialized [ 2.328250] mmc1: new high speed MMC card at address 0001 [ 2.341178] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.351206] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.363737] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.372969] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.380344] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.393578] mmcblk1: p1 p2 [ 2.401717] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.421211] hctosys: unable to open rtc device (rtc0) [ 2.426747] sr_init: No PMIC hook to init smartreflex [ 2.432434] sr_init: platform driver register failed for SR [ 2.475621] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.717452] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724529] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750671] rtc-ds1307 2-006f: SET TIME! [ 1.756409] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763162] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767776] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775966] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781747] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789989] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799152] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806039] hub 1-0:1.0: USB hub found [ 1.809993] hub 1-0:1.0: 1 port detected [ 1.814396] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820173] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828283] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837306] hub 2-0:1.0: USB hub found [ 1.841277] hub 2-0:1.0: 1 port detected [ 1.847311] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881291] vdd_3v3: supplied by regen1 [ 1.919646] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.936499] aic_dvdd_fixed: disabling [ 1.941093] Waiting for root device /dev/mmcblk0p1... [ 1.972229] mmc1: new high speed MMC card at address 0001 [ 1.978197] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.983096] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989431] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996301] mmcblk1: p1 [ 2.120160] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155185] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180396] hub 2-1:1.0: USB hub found [ 2.184374] hub 2-1:1.0: 4 ports detected [ 2.276419] hub 1-1:1.0: USB hub found [ 2.280406] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.718230] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725307] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750650] rtc-ds1307 2-006f: SET TIME! [ 1.756393] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763146] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767765] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775990] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781770] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790018] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799181] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806070] hub 1-0:1.0: USB hub found [ 1.810024] hub 1-0:1.0: 1 port detected [ 1.814432] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820206] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828315] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837323] hub 2-0:1.0: USB hub found [ 1.841288] hub 2-0:1.0: 1 port detected [ 1.847312] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881275] vdd_3v3: supplied by regen1 [ 1.920683] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.938220] aic_dvdd_fixed: disabling [ 1.942943] Waiting for root device /dev/mmcblk0p1... [ 1.962375] mmc1: new high speed MMC card at address 0001 [ 1.968354] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973237] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979572] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986442] mmcblk1: p1 [ 2.120152] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155181] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180422] hub 2-1:1.0: USB hub found [ 2.184400] hub 2-1:1.0: 4 ports detected [ 2.276445] hub 1-1:1.0: USB hub found [ 2.280438] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.220143] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.227024] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.237415] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.242263] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.248587] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.255456] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.265049] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.274555] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.281600] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.325228] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.331529] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.338403] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.347996] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.357505] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.364545] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.370664] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.376977] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.383828] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.393421] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.402937] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.409988] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.416704] vdd_3v3: supplied by regen1 [ 2.455351] hctosys: unable to open rtc device (rtc0) [ 2.460658] sr_init: No PMIC hook to init smartreflex [ 2.466182] sr_init: platform driver register failed for SR [ 2.515532] aic_dvdd_fixed: disabling [ 2.519770] ldousb: disabling [ 2.527012] Waiting for root device /dev/mmcblk0p1... [ 2.566913] mmc1: new high speed MMC card at address 0001 [ 2.574755] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.580104] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.587003] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.595582] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.456896] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.531141] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.541467] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.615726] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.626054] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.700308] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.710634] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.784824] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.795152] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.869398] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.879725] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.953916] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.964243] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.038508] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.048874] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.123179] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.133501] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.207821] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.218136] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.292321] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.302640] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.376877] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.387204] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.461451] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.471774] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.546019] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.556346] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.630597] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.640917] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.715114] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.725435] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.799672] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.809997] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.084825] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.158812] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.168885] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.242864] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.252937] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.326917] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.336997] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.410977] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.421076] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.495061] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.505144] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.579132] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.589198] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.663186] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.673275] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.747258] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.757328] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.831311] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.841379] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.915363] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.925437] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.999423] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.009499] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.083480] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.093558] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.167538] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.177610] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.251589] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.261668] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.335653] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.345729] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.419708] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.429788] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:04]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:05]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.497342] Key type dns_resolver registered [ 2.503807] ThumbEE CPU extension supported. [ 2.508229] Registering SWP/SWPB emulation handler [ 2.537262] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.545684] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.555679] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.572689] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.579433] [drm] No driver support for vblank timestamp query. [ 2.597214] mmc1: new high speed MMC card at address 0001 [ 2.606513] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.613598] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.623124] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.632710] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.642648] mmcblk1: p1 [ 2.757202] Console: switching to colour frame buffer device 240x75 [ 2.844558] drm drm: fb0: frame buffer device [ 2.869187] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.879297] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890949] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896612] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905355] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.919219] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.929748] hub 1-0:1.0: USB hub found [ 2.933754] hub 1-0:1.0: 1 port detected [ 2.944732] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.959196] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.021273] dvdd_ts: disabling [ 3.024490] usb1_vbus: disabling [ 3.027751] vdd_cam_1v8_reg: disabling [ 3.035277] Waiting for root device /dev/mmcblk0p1... [ 3.244219] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.221812] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.864238] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.497612] Key type dns_resolver registered [ 2.504072] ThumbEE CPU extension supported. [ 2.508496] Registering SWP/SWPB emulation handler [ 2.537978] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.546209] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.556211] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.572452] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.579282] [drm] No driver support for vblank timestamp query. [ 2.602633] mmc1: new high speed MMC card at address 0001 [ 2.612364] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.620651] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.629050] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.636262] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.646405] mmcblk1: p1 [ 2.758074] Console: switching to colour frame buffer device 240x75 [ 2.845519] drm drm: fb0: frame buffer device [ 2.864543] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.874639] usb2_vbus: supplied by vdd-sys-5v0 [ 2.886273] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.891866] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.900690] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.914557] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.924984] hub 1-0:1.0: USB hub found [ 2.928985] hub 1-0:1.0: 1 port detected [ 2.939058] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.952655] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.014926] dvdd_ts: disabling [ 3.018029] usb1_vbus: disabling [ 3.021393] vdd_cam_1v8_reg: disabling [ 3.028716] Waiting for root device /dev/mmcblk0p1... [ 3.239563] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.221964] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.864513] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.840546] Bluetooth: RFCOMM ver 1.11 [ 2.844498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.849892] Bluetooth: BNEP socket layer initialized [ 2.855521] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.861527] Bluetooth: HIDP socket layer initialized [ 2.867961] Key type dns_resolver registered [ 2.877555] Registering SWP/SWPB emulation handler [ 2.917231] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.923666] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.934613] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.958763] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.965568] [drm] No driver support for vblank timestamp query. [ 3.142116] Console: switching to colour frame buffer device 240x75 [ 3.229285] drm drm: fb0: frame buffer device [ 3.262878] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.270100] usb2_vbus: supplied by vdd-sys-5v0 [ 3.279422] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.285226] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.294417] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.312888] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.326873] hub 1-0:1.0: USB hub found [ 3.330889] hub 1-0:1.0: 1 port detected [ 3.345012] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.359206] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.445378] dvdd_ts: disabling [ 3.448481] usb1_vbus: disabling [ 3.451743] vdd_cam_1v8_reg: disabling [ 3.456529] ALSA device list: [ 3.459571] #0: NVIDIA Tegra Dalmore [ 3.465390] Waiting for root device /dev/mmcblk0p1... [ 3.652881] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.686995] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.224433] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.730084] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.739524] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.746574] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.777665] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.778872] usbcore: registered new interface driver usbhid [ 1.784088] usbhid: USB HID core driver [ 1.792904] NET: Registered protocol family 10 [ 1.799799] sit: IPv6 over IPv4 tunneling driver [ 1.800296] NET: Registered protocol family 17 [ 1.803224] NET: Registered protocol family 15 [ 1.807717] Key type dns_resolver registered [ 1.811990] Registering SWP/SWPB emulation handler [ 1.827903] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.828187] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.836351] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.843863] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.853691] mmc1: new DDR MMC card at address 0001 [ 1.858572] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.862856] max98090 1-0010: MAX98090 REVID=0x43 [ 1.867315] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.873573] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.879376] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.886038] mmcblk1: p1 p2 [ 1.887736] max98090 1-0010: use default 2.8v micbias [ 1.898954] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.907286] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.941632] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.959901] VDD10_HDMI_1.0V: disabling [ 1.960586] vdd_g3d: disabling [ 1.961660] BUCK8_2.8V: disabling [ 1.965639] ALSA device list: [ 1.967288] #0: Odroid-U3 [ 1.970962] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.883766] 7f80: ee087f80 ee087f80 00000000 00000000 ee087f90 ee087f90 ee03dc40 ee03dc40 [ 2.892327] 7fa0: c035c084 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.900893] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.909455] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 3015c023 71808600 [ 2.918020] [<c0393c24>] (run_timer_softirq) from [<c0345240>] (__do_softirq+0xd0/0x218) [ 2.926486] [<c0345240>] (__do_softirq) from [<c034562c>] (irq_exit+0xb4/0x114) [ 2.934131] [<c034562c>] (irq_exit) from [<c0383d00>] (__handle_domain_irq+0x60/0xb4) [ 2.942331] [<c0383d00>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 2.951078] [<c0301798>] (gic_handle_irq) from [<c030c4d4>] (__irq_svc+0x54/0x70) [ 2.958910] Exception stack(0xee087bc8 to 0xee087c10) [ 2.964196] 7bc0: 00000000 c14127a8 00000080 60000113 c14105dc c1307c3c [ 2.972754] 7be0: ee087d88 0000000b 0000005c fffffffc 00000064 00000020 00000000 ee087c18 [ 2.981311] 7c00: c030bae0 c030bb14 60000113 ffffffff [ 2.986596] [<c030c4d4>] (__irq_svc) from [<c030bb14>] (die+0x190/0x474) [ 2.993611] [<c030bb14>] (die) from [<c031cbdc>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 3.001903] [<c031cbdc>] (__do_kernel_fault.part.0) from [<c0317c50>] (do_page_fault+0x370/0x384) [ 3.011198] [<c0317c50>] (do_page_fault) from [<c030137c>] (do_PrefetchAbort+0x38/0x9c) [ 3.019572] [<c030137c>] (do_PrefetchAbort) from [<c030c5cc>] (__pabt_svc+0x4c/0x80) [ 3.027685] Exception stack(0xee087d88 to 0xee087dd0) [ 3.032969] 7d80: ee374810 00000005 0000006d c05d23e4 00000005 ee369980 [ 3.041532] 7da0: 00000005 eefe6d44 0000000e ee6f6580 ee6f3a10 00000000 ed809160 ee087dd8 [ 3.050099] 7dc0: c05d23f0 0000006c 20000033 ffffffff [ 3.055388] [<c030c5cc>] (__pabt_svc) from [<0000006c>] (0x6c) [ 3.061492] Code: e593c000 e593e004 e2022602 e35c0000 (e58ec000) [ 3.067870] ---[ end trace f65cb194193e79cc ]--- [ 3.072697] Kernel panic - not syncing: Fatal exception in interrupt [ 3.079347] CPU1: stopping [ 3.082178] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.6.0-00119-g49817c3 #1 [ 3.090927] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 3.097230] [<c031035c>] (unwind_backtrace) from [<c030b980>] (show_stack+0x10/0x14) [ 3.105341] [<c030b980>] (show_stack) from [<c058bf14>] (dump_stack+0x88/0x9c) [ 3.112903] [<c058bf14>] (dump_stack) from [<c030eb04>] (handle_IPI+0x16c/0x18c) [ 3.12[ 3.121385] Unable to handle kernel paging request at virtual address 0000f9fc [ 3.121386] pgd = c0204000 [ 3.121389] [0000f9fc] *pgd=00000000 [ 3.121 [PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:48]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.530546] LR is at wq_worker_sleeping+0x8/0xd0 [ 2.535376] pc : [<c035c588>] lr : [<c0357980>] psr: 20000193 [ 2.535376] sp : ee087bc8 ip : 00000001 fp : ee087c14 [ 2.547389] r10: c1302684 r9 : 2ddc5000 r8 : ee06dd68 [ 2.552862] r7 : c12082c0 r6 : c12082c0 r5 : ee06da40 r4 : eefcd2c0 [ 2.559686] r3 : 00000000 r2 : 00000020 r1 : 00000000 r0 : ee06da40 [ 2.566517] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.574081] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.580089] Process kworker/u4:0 (pid: 6, stack limit = 0xee086220) [ 2.586650] Stack: (0xee087bc8 to 0xee088000) [ 2.591202] 7bc0: eefcd2c0 c0b52c44 00000000 00000000 ee06da40 00000000 [ 2.599757] 7be0: ee06da40 ee074b40 c0b52e98 00000000 ee06c000 ee086000 ee08796c ee06c000 [ 2.608314] 7c00: 00000000 ee087c28 ee06dce0 ee36a812 ee087c24 c0b52e98 ee06da40 ee08796c [ 2.616872] 7c20: 00000000 c034386c ee087c28 ee087c28 ee36a814 0000000b 00000000 c030bd94 [ 2.625440] 7c40: ee086220 0000000b 60000193 ee086000 00000000 00000008 65000000 63353365 [ 2.634002] 7c60: 20306365 36316565 63366465 37306320 37336537 30302063 30303030 28203030 [ 2.642559] 7c80: 35336565 30306663 c0002029 ee087cac c14429f8 ee36a810 ee087d88 8000000d [ 2.651121] 7ca0: c1339d48 ee087d88 ee709fc0 ee66a690 00000000 c031cbdc c1339d48 c0317cec [ 2.659677] 7cc0: ee18cf38 00000000 ee087cf8 c13087fc 0000000d c0317cec ee36a810 c0317cf4 [ 2.668243] 7ce0: c13087fc c030137c 00000001 0000000a 00000001 00000000 ffffffff 00000000 [ 2.676806] 7d00: ffffffff 00000000 00000000 c05d2860 ee709e31 c200794c ee36aa10 00000001 [ 2.685370] 7d20: ee709e50 ee709e1c eefffd94 ee709f88 c0f0a9e2 ee087dd4 ee709f8a c0f0a9e2 [ 2.693920] 7d40: 00000002 ee087d60 c0c1ceec c0596bc0 ffffff10 ffff0a01 0000000a ee709f80 [ 2.702484] 7d60: ffffff10 ffff0a01 ee13ce00 ee087dd0 ee36a810 20000013 ffffffff ee087dbc [ 2.711044] 7d80: 0000000e c030c5cc ee36a810 00000005 0000006d c05d23e4 00000005 ee35eb80 [ 2.719602] 7da0: 00000005 eefe6d44 0000000e ee709fc0 ee66a690 00000000 ed809160 ee087dd8 [ 2.728160] 7dc0: c05d23f0 ee36a810 20000013 ffffffff 00000051 c05d2400 00000005 ee35eb80 [ 2.736720] 7de0: c0c322c8 c05c651c eefe6d44 ee35eb80 c0c322e0 eefe6d44 0000000e c05c7518 [ 2.745280] 7e00: ee624a50 00000001 00000000 c2009c40 ee66a690 00000000 ee709f80 ee709c0c [ 2.753844] 7e20: ee709fc0 ee189240 ee709d80 c05c5c28 ee709c00 c143b968 024080c0 c0f09bf0 [ 2.762398] 7e40: c1341f24 c1341f5c ee19da10 ee19da10 ee709bd0 ee19da10 c13c4fdc ee0b6000 [ 2.770950] 7e60: 0000000f ee00b000 ee03ec00 c05c5d7c ee19da10 ee709b90 c144fcfc c0798e88 [ 2.779519] 7e80: ee19da10 c144fcf4 c144fcfc c077b6d0 00000000 ee087ec8 c077b9bc 00000001 [ 2.788076] 7 [PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.523143] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529487] isl29018 7-0044: Failed to read 1: -6 [ 1.534073] isl29018 7-0044: regmap initialization fails: -6 [ 1.544326] NET: Registered protocol family 10 [ 1.548773] sit: IPv6 over IPv4 tunneling driver [ 1.552360] NET: Registered protocol family 17 [ 1.556359] can: controller area network core (rev 20120528 abi 9) [ 1.562546] NET: Registered protocol family 29 [ 1.566937] can: raw protocol (rev 20120528) [ 1.571186] can: broadcast manager protocol (rev 20120528 t) [ 1.576829] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582544] Key type dns_resolver registered [ 1.586877] ThumbEE CPU extension supported. [ 1.590775] Registering SWP/SWPB emulation handler [ 1.599960] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605441] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611808] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617185] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627257] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633218] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646669] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652399] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658508] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663884] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673627] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695666] Waiting for root device /dev/mmcblk0p1... [ 1.699517] mmc0: tuning execution failed: -5 [ 1.703603] mmc0: error -5 whilst initialising MMC card [ 2.572924] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586210] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591670] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598042] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603427] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:45]: got exception: timeout ~$off
[PYBOOT] [pi 01:46]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.528226] isl29018 7-0044: No cache defaults, reading back from HW [ 1.534573] isl29018 7-0044: Failed to read 1: -6 [ 1.539157] isl29018 7-0044: regmap initialization fails: -6 [ 1.549407] NET: Registered protocol family 10 [ 1.553859] sit: IPv6 over IPv4 tunneling driver [ 1.557444] NET: Registered protocol family 17 [ 1.561443] can: controller area network core (rev 20120528 abi 9) [ 1.567630] NET: Registered protocol family 29 [ 1.572022] can: raw protocol (rev 20120528) [ 1.576271] can: broadcast manager protocol (rev 20120528 t) [ 1.581914] can: netlink gateway (rev 20130117) max_hops=1 [ 1.587627] Key type dns_resolver registered [ 1.591962] ThumbEE CPU extension supported. [ 1.595861] Registering SWP/SWPB emulation handler [ 1.605064] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.610544] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.616909] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.622287] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.632362] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.638320] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.651779] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.657514] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.663620] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.668996] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.678740] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.700804] Waiting for root device /dev/mmcblk0p1... [ 1.704656] mmc0: tuning execution failed: -5 [ 1.708739] mmc0: error -5 whilst initialising MMC card [ 2.573026] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586320] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591784] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598156] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603540] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:53]: got exception: timeout ~$off
[PYBOOT] [pi 01:54]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657199] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667689] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674164] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679581] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688008] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.698862] mmc2: switch to bus width 8 failed [ 1.703595] mmc2: switch to bus width 4 failed [ 1.708087] mmc2: new high speed MMC card at address 0001 [ 1.708730] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.720816] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.722996] hub 3-0:1.0: USB hub found [ 1.723043] hub 3-0:1.0: 1 port detected [ 1.733427] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.740053] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.741138] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.741142] [drm] No driver support for vblank timestamp query. [ 1.759974] mmcblk2: p3 [ 1.793801] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.802023] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.804906] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.812257] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.831874] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.837693] mmc0: new SDIO card at address 0001 [ 1.846829] Console: switching to colour frame buffer device 170x48 [ 1.902108] drm drm: fb0: frame buffer device [ 1.918696] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.925493] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.932572] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.946761] vdd_1v5: disabling [ 1.949841] vdd_1v2: disabling [ 2.603291] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.614734] Waiting for root device /dev/mmcblk0p3... [ 58.467537] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:05]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:06]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.745320] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.750651] Bluetooth: BNEP socket layer initialized [ 1.755634] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.761588] Bluetooth: HIDP socket layer initialized [ 1.767165] Key type dns_resolver registered [ 1.772667] Registering SWP/SWPB emulation handler [ 1.788295] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.795089] VDDIO_HDMI: supplied by vdd_5v0 [ 1.799531] vdd_sys: supplied by vdd_5v0 [ 1.803610] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.808584] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.815175] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.825724] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.832260] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.837712] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.845796] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.871435] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.880432] hub 3-0:1.0: USB hub found [ 1.884284] hub 3-0:1.0: 1 port detected [ 1.897156] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.903834] [drm] No driver support for vblank timestamp query. [ 2.004478] Console: switching to colour frame buffer device 170x48 [ 2.027646] drm drm: fb0: frame buffer device [ 2.071442] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.079126] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.087055] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.109646] vdd_1v5: disabling [ 2.112733] vdd_1v2: disabling [ 2.115934] ALSA device list: [ 2.118896] #0: NVIDIA Tegra Seaboard [ 2.409150] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.420262] Waiting for root device /dev/mmcblk0p3... [ 59.836366] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:46]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.922149] ledtrig-cpu: registered to indicate activity on CPUs [ 1.928619] usbcore: registered new interface driver usbhid [ 1.934234] usbhid: USB HID core driver [ 1.943695] NET: Registered protocol family 10 [ 1.949279] sit: IPv6 over IPv4 tunneling driver [ 1.954559] NET: Registered protocol family 17 [ 1.959045] can: controller area network core (rev 20120528 abi 9) [ 1.965301] NET: Registered protocol family 29 [ 1.969787] can: raw protocol (rev 20120528) [ 1.974060] can: broadcast manager protocol (rev 20120528 t) [ 1.979766] can: netlink gateway (rev 20130117) max_hops=1 [ 1.985809] Key type dns_resolver registered [ 1.990295] ThumbEE CPU extension supported. [ 1.994598] Registering SWP/SWPB emulation handler [ 2.002044] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.008880] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.018066] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.025085] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.032104] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.039093] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.052398] db8500-esram12: disabling [ 2.056182] db8500-esram34: disabling [ 2.060119] V-CSI/DSI: disabling [ 2.063385] mmci-reg: disabling [ 2.067108] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.073089] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.079528] Waiting for root device /dev/mmcblk0p4... [ 2.085754] mmc3: new high speed MMC card at address 0001 [ 2.091735] mmcblk3: mmc3:0001 3.53 GiB [ 2.095977] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.101562] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.107147] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.113555] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:10]: got exception: timeout ~$off
[PYBOOT] [snowball 02:11]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.702056] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.712799] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.722747] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.733489] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.757110] NET: Registered protocol family 10 [ 2.762664] sit: IPv6 over IPv4 tunneling driver [ 2.768859] NET: Registered protocol family 17 [ 2.773437] NET: Registered protocol family 35 [ 2.778015] NET: Registered protocol family 37 [ 2.782806] Registering SWP/SWPB emulation handler [ 2.789184] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.795501] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.802093] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.809082] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-27 17:23:43 UTC (956856223) [ 2.818267] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.825286] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.832275] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.839263] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.852813] db8500-esram12: disabling [ 2.856567] db8500-esram34: disabling [ 2.860504] V-CSI/DSI: disabling [ 2.863769] mmci-reg: disabling [ 2.867065] ALSA device list: [ 2.870086] #0: MOP500-card [ 2.873413] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.879364] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.885559] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>": Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: Id "2[ 19.947808] mmcblk0: error -110 sending status command, aborting " respawning too fast: disabled for 5 minutes [ 19.959374] mmcblk0: error -110 sending status command, retrying [ 19.967822] mmcblk0: error -110 sending status command, retrying [ 19.976300] mmcblk0: error -110 sending status command, aborting [ 19.987438] mmcblk0: error -110 sending status command, retrying [ 19.995860] mmcblk0: error -110 sending status command, retrying [ 20.004277] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" [ 20.052005] mmcblk0: error -110 sending status command, retrying INIT: Id "1" respawning too fast: disab[ 20.060511] mmcblk0: error -110 sending status command, retrying led for 5 minutes INIT: Id "4"[ 20.071743] mmcblk0: error -110 sending status command, aborting respawning too fast: disabled for 5 minutes INIT: Id "6" resp[ 20.083209] mmcblk0: error -110 sending status command, retrying awning too fast: disabled for 5 m[ 20.092276] mmcblk0: error -110 sending status command, retrying inutes INIT: Id "S1" respawnin[ 20.101154] mmcblk0: error -110 sending status command, aborting g too fast: disabled for 5 minutes INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: Id "3" respawning too fast: disabled for 5 minutes [ 20.212111] mmcblk0: error -110 sending status command, retrying [ 20.220586] mmcblk0: error -110 sending status command, retrying [ 20.229045] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 52.285458] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.
kernel-build-reports@lists.linaro.org