Failed boards:
dalmore tegra_defconfig : FAILED 1:26.38 dalmore multi_v7_defconfig : FAILED 1:05.05 dalmore multi_lpae_defconfig : FAILED 1:05.07 panda multi_v7_defconfig : FAILED 1:35.70
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:14.34 arndale exynos_defconfig : passed 1:02.69 bbb omap2plus_defconfig : passed 1:32.69 bbb multi_v7_defconfig : passed 1:26.01 beaver tegra_defconfig : passed 0:52.03 beaver multi_v7_defconfig : passed 0:51.09 capri bcm_defconfig : passed 0:43.18 capri multi_v7_defconfig : passed 0:44.54 cubie sunxi_defconfig : passed 0:57.26 cubie multi_v7_defconfig : passed 0:56.66 cubie2 sunxi_defconfig : passed 0:52.53 cubie2 multi_v7_defconfig : passed 0:59.48 cubie2 multi_lpae_defconfig : passed 0:56.16 cubox dove_defconfig : passed 1:05.18 hummingboard imx_v6_v7_defconfig : passed 1:19.89 hummingboard multi_v7_defconfig : passed 1:05.46 omap5uevm multi_v7_defconfig : warnings 1:37.11 omap5uevm multi_lpae_defconfig : warnings 1:36.28 panda omap2plus_defconfig : passed 1:15.44 sama5 sama5_defconfig : passed 1:48.28 seaboard tegra_defconfig : passed 1:01.87 seaboard multi_v7_defconfig : passed 1:10.32 snow exynos_defconfig : passed 1:23.66 snowball u8500_defconfig : passed 1:30.03 snowball multi_v7_defconfig : passed 2:12.50 trimslice tegra_defconfig : passed 1:02.26 trimslice multi_v7_defconfig : passed 1:05.68 wandboard imx_v6_v7_defconfig : passed 0:59.63 wandboard multi_v7_defconfig : passed 0:59.98
Offline boards:
omap5uevm omap2plus_defconfig : OFFLINE 2:29.61
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-8670-gd15e031/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.14-8670-gd15e031/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8670-gd15e031/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.8 MiB/s done Bytes transferred = 4528504 (451978 hex) Tegra114 (Dalmore) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-8670-gd15e031/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-8670-gd15e031/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8670-gd15e031/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 923.8 KiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x451978 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-8670-gd15e031/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.14-8670-gd15e031/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8670-gd15e031/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.8 MiB/s done Bytes transferred = 4506176 (44c240 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-8670-gd15e031/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-8670-gd15e031/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8670-gd15e031/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1.2 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44c240 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.077066] avdd-usb: 3300 mV [ 1.079063] avdd-usb: supplied by vdd-sys-5v0 [ 1.085221] rail-3v3: no parameters [ 1.089134] rail-5v0: no parameters [ 1.092705] REGEN3: no parameters [ 1.095654] SYSEN1: no parameters [ 1.099178] SYSEN2: no parameters [ 1.104265] Linux video capture interface: v2.00 [ 1.110814] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.117778] Advanced Linux Sound Architecture Driver Initialized. [ 1.127506] Bluetooth: Core ver 2.19 [ 1.129619] NET: Registered protocol family 31 [ 1.133790] Bluetooth: HCI device and connection manager initialized [ 1.140317] Bluetooth: HCI socket layer initialized [ 1.145198] Bluetooth: L2CAP socket layer initialized [ 1.150525] Bluetooth: SCO socket layer initialized [ 1.157833] cfg80211: Calling CRDA to update world regulatory domain [ 1.164630] Switched to clocksource arch_sys_counter [ 1.253067] NET: Registered protocol family 2 [ 1.259539] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.265214] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.271920] TCP: Hash tables configured (established 8192 bind 8192) [ 1.279401] TCP: reno registered [ 1.281016] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.287168] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.294740] NET: Registered protocol family 1 [ 1.300428] RPC: Registered named UNIX socket transport module. [ 1.304548] RPC: Registered udp transport module. [ 1.309381] RPC: Registered tcp transport module. [ 1.314080] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.320648] PCI: CLS 0 bytes, default 64 [ 1.340696] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.349246] bounce pool size: 64 pages [ 1.356572] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.363584] msgmni has been set to 1468 [ 1.371673] io scheduler noop registered (default) [ 1.404514] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.411569] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.419873] tegra114-pinctrl 70000868.pinmux: Error applying setting,~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.646728] Power Management for TI OMAP4. [ 1.651000] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.658355] Registering SWP/SWPB emulation handler [ 1.664123] vwl1271: 1800 mV [ 1.668945] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.678527] twl 0-0048: PIH (irq 39) nested IRQs [ 1.684173] twl_rtc rtc.11: Power up reset detected. [ 1.690124] twl_rtc rtc.11: Enabling TWL-RTC [ 1.697204] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.704193] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.710327] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.716430] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.722595] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.728149] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.733612] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.738647] VDAC: 1800 mV [ 1.742340] VANA: 2100 mV [ 1.745910] VCXIO: 1800 mV [ 1.745910] VUSB: 3300 mV [ 1.752807] V1V8: 1800 mV [ 1.756378] V2V1: 2100 mV [ 1.879211] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.979797] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.987396] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.996276] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.003784] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.010101] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.018676] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.029937] hub 1-1:1.0: USB hub found [ 2.034027] hub 1-1:1.0: 5 ports detected [ 2.059814] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.096069] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.106475] mmc0: new high speed SDHC card at address b368 [ 2.112548] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.118682] mmcblk0: p1 p2 [ 2.329193] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.575531] smsc95xx v1.0.4 [ 2.646057] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 36:77:99:e4:d7:39 ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter