Failed boards:

cubie2 sunxi_defconfig : FAILED 1:24.28 cubie2 multi_v7_defconfig : FAILED 1:41.02 cubie2 multi_lpae_defconfig : FAILED 1:22.82 cubox multi_v7_defconfig : FAILED 1:30.27 omap5uevm omap2plus_defconfig : FAILED 1:48.70 omap5uevm multi_lpae_defconfig : FAILED 1:48.00 snow multi_v7_defconfig : FAILED 1:14.83 snow multi_lpae_defconfig : FAILED 1:11.64 snowball u8500_defconfig : FAILED 1:53.32

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:11.59 arndale exynos_defconfig : passed 1:13.72 arndale multi_v7_defconfig : passed 1:36.75 arndale multi_lpae_defconfig : passed 1:23.75 bbb omap2plus_defconfig : passed 1:31.94 bbb multi_v7_defconfig : passed 1:28.61 beaver tegra_defconfig : passed 0:57.59 beaver multi_v7_defconfig : passed 0:58.81 capri bcm_defconfig : passed 0:38.94 capri multi_v7_defconfig : passed 0:42.88 cubie sunxi_defconfig : passed 1:39.37 cubie multi_v7_defconfig : passed 1:23.62 dalmore tegra_defconfig : passed 1:32.02 dalmore multi_v7_defconfig : passed 1:27.35 dalmore multi_lpae_defconfig : passed 2:26.25 hummingboard imx_v6_v7_defconfig : passed 1:19.00 hummingboard multi_v7_defconfig : passed 1:09.47 jetson multi_v7_defconfig : passed 1:07.39 jetson multi_lpae_defconfig : passed 0:56.93 panda omap2plus_defconfig : warnings 1:30.66 panda multi_v7_defconfig : warnings 1:47.16 sama5 sama5_defconfig : passed 1:56.02 seaboard tegra_defconfig : passed 1:15.26 seaboard multi_v7_defconfig : passed 1:10.52 snow exynos_defconfig : passed 1:28.29 snowball multi_v7_defconfig : passed 4:41.22 trimslice tegra_defconfig : passed 1:05.98 trimslice multi_v7_defconfig : passed 1:23.17 wandboard imx_v6_v7_defconfig : passed 1:09.71 wandboard multi_v7_defconfig : passed 1:12.01

Offline boards:

jetson tegra_defconfig : OFFLINE 0:42.17 omap5uevm multi_v7_defconfig : OFFLINE 2:23.24

Board legend is available at http://arm-soc.lixom.net/boards.html

Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.270210] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.277715] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.283606] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.292573] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.301574] scsi0 : ahci_platform [ 1.305306] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314023] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.319672] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.327740] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.340208] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.347256] hub 1-0:1.0: USB hub found [ 1.351098] hub 1-0:1.0: 1 port detected [ 1.356169] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.361840] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.369786] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.385191] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.392201] hub 2-0:1.0: USB hub found [ 1.396034] hub 2-0:1.0: 1 port detected [ 1.401061] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.407742] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.415625] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480032] hub 3-0:1.0: USB hub found [ 1.483869] hub 3-0:1.0: 1 port detected [ 1.488881] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.495597] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.503433] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565016] hub 4-0:1.0: USB hub found [ 1.568853] hub 4-0:1.0: 1 port detected [ 1.573522] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.661116] No MAC Management Counters available [ 1.665890] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.672523] IP-Config: Failed to open eth0 [ 1.676646] IP-Config: No network devices available [ 1.681564] vcc3v3: disabling [ 1.684528] vcc3v0: disabling [ 1.687623] ALSA device list: [ 1.690600] No soundcards found. [ 1.694740] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.271093] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.278600] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.284485] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.293455] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.302475] scsi0 : ahci_platform [ 1.306204] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.314928] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.320573] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.328646] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.341090] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.348155] hub 1-0:1.0: USB hub found [ 1.352010] hub 1-0:1.0: 1 port detected [ 1.357083] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.362756] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.370697] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.386076] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.393102] hub 2-0:1.0: USB hub found [ 1.396940] hub 2-0:1.0: 1 port detected [ 1.401971] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.408655] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.416539] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.480976] hub 3-0:1.0: USB hub found [ 1.484829] hub 3-0:1.0: 1 port detected [ 1.489848] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.496568] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.504410] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.565915] hub 4-0:1.0: USB hub found [ 1.569756] hub 4-0:1.0: 1 port detected [ 1.574441] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:19 UTC (19) [ 1.661936] No MAC Management Counters available [ 1.666710] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.673334] IP-Config: Failed to open eth0 [ 1.677457] IP-Config: No network devices available [ 1.682369] vcc3v3: disabling [ 1.685335] vcc3v0: disabling [ 1.688432] ALSA device list: [ 1.691410] No soundcards found. [ 1.695541] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: -------------------------------------------------

[ 0.891133] usb1-vbus: 5000 mV [ 0.894577] usb2-vbus: 5000 mV [ 0.965764] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973249] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979142] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988108] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997003] scsi0 : ahci_platform [ 1.000650] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008880] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014475] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022332] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045788] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052768] hub 1-0:1.0: USB hub found [ 1.056613] hub 1-0:1.0: 1 port detected [ 1.061099] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066738] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074570] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095731] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102604] hub 2-0:1.0: USB hub found [ 1.106432] hub 2-0:1.0: 1 port detected [ 1.110861] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117533] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125352] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190552] hub 3-0:1.0: USB hub found [ 1.194339] hub 3-0:1.0: 1 port detected [ 1.198847] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205487] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213348] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280536] hub 4-0:1.0: USB hub found [ 1.284324] hub 4-0:1.0: 1 port detected [ 1.288707] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.375760] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392078] No MAC Management Counters available [ 1.396847] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403449] IP-Config: Failed to open eth0 [ 1.407574] IP-Config: No network devices available [ 1.412470] vcc3v3: disabling [ 1.415433] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.240632] SPEAr-ehci: EHCI SPEAr driver [ 1.244745] tegra-ehci: Tegra EHCI driver [ 1.248879] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255060] ohci-pci: OHCI PCI platform driver [ 1.259570] ohci-platform: OHCI generic platform driver [ 1.264892] ohci-omap3: OHCI OMAP3 driver [ 1.269000] SPEAr-ohci: OHCI SPEAr driver [ 1.273742] usbcore: registered new interface driver usb-storage [ 1.281227] mousedev: PS/2 mouse device common for all mice [ 1.288217] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297553] i2c /dev entries driver [ 1.303545] usbcore: registered new interface driver uvcvideo [ 1.309302] USB Video Class driver (1.1.1) [ 1.313402] gspca_main: v2.14.0 registered [ 1.320627] orion_wdt: Initial timeout 25 sec [ 1.326086] sdhci: Secure Digital Host Controller Interface driver [ 1.332248] sdhci: Copyright(c) Pierre Ossman [ 1.337297] Synopsys Designware Multimedia Card Interface Driver [ 1.343684] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.350096] usbcore: registered new interface driver usbhid [ 1.355656] usbhid: USB HID core driver [ 1.360659] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368830] TCP: cubic registered [ 1.372175] NET: Registered protocol family 17 [ 1.376634] can: controller area network core (rev 20120528 abi 9) [ 1.382872] NET: Registered protocol family 29 [ 1.387317] can: raw protocol (rev 20120528) [ 1.391582] can: broadcast manager protocol (rev 20120528 t) [ 1.397237] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403110] Key type dns_resolver registered [ 1.407582] ThumbEE CPU extension supported. [ 1.411866] Registering SWP/SWPB emulation handler [ 1.416655] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422280] USB Power: 5000 mV [ 1.425854] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-07 00:41:48 UTC (1402101708) [ 1.436384] ALSA device list: [ 1.439341] No soundcards found. [ 1.443268] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 47.650890] can: raw protocol (rev 20120528) [ 47.650896] can: broadcast manager protocol (rev 20120528 t) [ 47.650907] can: netlink gateway (rev 20130117) max_hops=1 [ 47.651197] Key type dns_resolver registered [ 47.651295] omap_vc_init_channel: No PMIC info for vdd_core [ 47.651297] omap_vp_init: No PMIC info for vdd_core [ 47.651302] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.651304] omap_vp_init: No PMIC info for vdd_mm [ 47.651307] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.651309] omap_vp_init: No PMIC info for vdd_mpu [ 47.651611] ThumbEE CPU extension supported. [ 47.651623] Registering SWP/SWPB emulation handler [ 47.657177] palmas 0-0048: Irq flag is 0x00000000 [ 47.734552] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.741301] mmc0: new high speed MMC card at address 0001 [ 47.747201] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.752021] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.758295] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.765174] mmcblk0: unknown partition table [ 47.765181] smps123: 600 <--> 1500 mV at 1060 mV [ 47.775562] mmcblk0boot1: unknown partition table [ 47.780807] smps45: 600 <--> 1310 mV at 1030 mV [ 47.781352] mmcblk0boot0: unknown partition table [ 47.792228] smps6: 1200 mV [ 47.796195] smps7: 1800 mV [ 47.800300] smps8: 600 <--> 1310 mV at 1040 mV [ 47.806024] smps9: failed to get the current voltage [ 47.811278] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.823330] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.951470] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.096482] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.102573] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.110002] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.116860] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.124555] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.137989] ALSA device list: [ 48.141084] No soundcards found. [ 48.145086] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.630501] Key type dns_resolver registered [ 2.630601] omap_vc_init_channel: No PMIC info for vdd_core [ 2.630605] omap_vp_init: No PMIC info for vdd_core [ 2.630614] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.630617] omap_vp_init: No PMIC info for vdd_mm [ 2.630627] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.630629] omap_vp_init: No PMIC info for vdd_mpu [ 2.631172] ThumbEE CPU extension supported. [ 2.631193] Registering SWP/SWPB emulation handler [ 2.631202] SmartReflex Class3 initialized [ 2.650739] palmas 0-0048: Irq flag is 0x00000000 [ 2.712934] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.713322] mmc0: new high speed MMC card at address 0001 [ 2.719414] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.719650] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.719867] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.722634] mmcblk0: unknown partition table [ 2.724618] mmcblk0boot1: unknown partition table [ 2.726452] mmcblk0boot0: unknown partition table [ 2.802852] smps123: 600 <--> 1500 mV at 1060 mV [ 2.809805] smps45: 600 <--> 1310 mV at 1030 mV [ 2.817345] smps6: 1200 mV [ 2.822074] smps7: 1800 mV [ 2.826989] smps8: 600 <--> 1310 mV at 1040 mV [ 2.833411] smps9: failed to get the current voltage [ 2.839344] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.853644] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.862474] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.869643] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.875694] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.884828] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.894201] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.901148] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.909744] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.918380] sr_init: No PMIC hook to init smartreflex [ 2.923866] sr_init: platform driver register failed for SR [ 2.952020] pbias_mmc_omap5: disabling [ 2.957501] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snow-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2920.609700] io scheduler cfq registered (default) [ 2920.612411] backlight supply power not found, using dummy regulator [ 2920.612458] pwm-backlight backlight: unable to request PWM, trying legacy API [ 2920.612464] pwm-backlight backlight: unable to request legacy PWM [ 2920.612501] platform backlight: Driver pwm-backlight requests probe deferral [ 2920.612694] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 2920.612700] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 2920.615483] Console: switching to colour frame buffer device 170x48 [ 2920.618042] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 2920.619844] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 2920.619852] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2920.621155] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621161] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2920.621539] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621546] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2920.621923] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621929] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2920.650110] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2920.651008] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 2920.651196] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 2920.651361] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 2920.651519] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 2921.456102] console [ttySAC3] enabled [ 2921.460026] Serial: IMX driver [ 2921.462969] msm_serial: driver initialized [ 2921.467098] STMicroelectronics ASC driver initialized [ 2921.472289] serial: Freescale lpuart driver [ 2921.476155] [drm] Initialized drm 1.1.0 20060810 [ 2921.483074] loop: module loaded [ 2921.486577] CAN device driver interface [ 2921.489916] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2921.496343] usbcore: registered new interface driver pegasus [ 2921.501990] usbcore: registered new interface driver asix [ 2921.507361] usbcore: registered new interface driver ax88179_178a [ 2921.513437] usbcore: registered new interface driver cdc_ether [ 2921.519266] usbcore: registered new interface driver smsc75xx [ 2921.524990] usbcore: registered new interface driver smsc95xx [ 2921.530712] usbcore: registered new interface driver net1080 [ 2921.536352] usbcore: registered new int~$off # PYBOOT: Exception: timeout Board snow-multi_v7_defconfig failure log: -------------------------------------------------

[ 2889.772418] pid_max: default: 32768 minimum: 301 [ 2889.772478] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.772484] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.772756] CPU: Testing write buffer coherency: ok [ 2889.772868] CPU0: update cpu_power 1024 [ 2889.772874] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.772971] Setting up static identity map for 0x40814838 - 0x408148d0 [ 2889.774054] CPU1: Booted secondary processor [ 2889.774085] CPU1: update cpu_power 1024 [ 2889.774088] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.774166] Brought up 2 CPUs [ 2889.774174] SMP: Total of 2 processors activated. [ 2889.774178] CPU: All CPU(s) started in HYP mode. [ 2889.774182] CPU: Virtualization extensions available. [ 2889.774423] devtmpfs: initialized [ 2889.776284] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.776464] pinctrl core: initialized pinctrl subsystem [ 2889.776662] regulator-dummy: no parameters [ 2889.782510] NET: Registered protocol family 16 [ 2889.783382] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.784096] cpuidle: using governor ladder [ 2889.784105] cpuidle: using governor menu [ 2889.789094] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.792891] No ATAGs? [ 2889.792910] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.792915] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.793010] EXYNOS5250 PMU Initialize [ 2889.794203] Serial: AMBA PL011 UART driver [ 2920.594304] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594316] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594602] vbat-supply: no parameters [ 2920.594738] P5.0V_USB3CON: 5000 mV [ 2920.595857] vgaarb: loaded [ 2920.596147] SCSI subsystem initialized [ 2920.596228] libata version 3.00 loaded. [ 2920.596378] usbcore: registered new interface driver usbfs [ 2920.596408] usbcore: registered new interface driver hub [ 2920.596459] usbcore: registered new device driver usb [ 2920.596870] Linux video ca~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.539123] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.551055] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.558349] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569824] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578430] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.590332] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597656] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609130] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616943] HS USB OTG: no transceiver configured [ 3.621673] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629516] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637451] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649383] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656707] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668182] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676757] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688690] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.696014] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707489] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715301] HS USB OTG: no transceiver configured [ 3.720001] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727874] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735809] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747741] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.755035] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766540] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.775115] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.787048] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794372] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805847] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813659] HS USB OTG: no transceiver configured [ 3.818359] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826202] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.834167] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.846069] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853393] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864868] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873474] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout