Tree/Branch: next Git describe: next-20140502 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig

Full Report ===========

arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.3 sec: PASS

arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.7 sec: PASS

arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 49.8 sec: PASS am335x-boneblack 0 min 44.2 sec: PASS omap3-beagle-xm 0 min 59.1 sec: PASS legacy,3530beagle 0 min 36.1 sec: PASS (Warnings: 1) omap4-panda 1 min 3.8 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 21.6 sec: PASS omap5-uevm 1 min 7.8 sec: PASS (Warnings: 1) omap3-n900 0 min 16.2 sec: PASS (Warnings: 1) legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 3.1 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 24.2 sec: PASS (Warnings: 1)

arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS

arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.8 sec: PASS ste-snowball 1 min 25.4 sec: PASS tegra30-beaver 0 min 25.2 sec: PASS am335x-boneblack 0 min 37.8 sec: PASS omap3-beagle-xm 0 min 54.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 57.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap5-uevm 1 min 36.9 sec: PASS (Warnings: 1) omap3-n900 0 min 15.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.3 sec: PASS omap4-panda-es 0 min 51.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.9 sec: PASS

arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS

arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.1 sec: PASS

arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.2 sec: PASS exynos5250-arndale 0 min 31.1 sec: PASS

arm-u8500_defconfig ------------------- ste-snowball 0 min 56.8 sec: FAIL

arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.8 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS

arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS

Console logs for failures =========================

arm-u8500_defconfig -------------------

ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------

U-Boot 2009.11 (sept. 19 2011 - 17:03:11)

CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1  0 U8500 $ U8500 $ version version

U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-rVnrnH/tmpYGFuNk-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-rVnrnH/tmpYGFuNk-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-rVnrnH/tmpYGFuNk-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ##################T ############ done Bytes transferred = 3289297 (3230d1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3289233 Bytes = 3.1 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.76 seconds. # PYBOOT: Result: FAIL