queue boot: 31 pass, 6 fail (v3.13.1-139-gea1ae4c) - Kernel-build-reports

5 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.13.1-139-gea1ae4c
Failed boot tests (console logs at the end)
===========================================
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
       sun7i-a20-cubieboard2:     FAIL:    sunxi_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     FAIL:    multi_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
                ste-snowball:     FAIL:    u8500_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 25.6 sec
             omap3-beagle-xm     PASS:    0 min 58.2 sec
                 am335x-bone     PASS:    0 min 27.3 sec
                 omap4-panda     PASS:    1 min  5.9 sec
              omap4-panda-es     PASS:    1 min  6.2 sec
        omap3-tobi,3730storm     PASS:    0 min 24.5 sec
        omap3-tobi,3530overo     PASS:    0 min 22.7 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     FAIL:    0 min 31.4 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 17.0 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.6 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.7 sec
             imx6q-wandboard     PASS:    0 min 17.1 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     FAIL:    0 min 31.4 sec
        sun4i-a10-cubieboard     PASS:    0 min 17.5 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 58.9 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 30.5 sec
multi_v7_defconfig
------------------
                ste-snowball     PASS:    0 min 32.6 sec
              tegra30-beaver     PASS:    0 min 16.6 sec
            am335x-boneblack     PASS:    0 min 22.4 sec
             omap3-beagle-xm     PASS:    0 min 54.0 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 31.4 sec
          armada-370-mirabox     FAIL:    0 min 28.7 sec
                 omap4-panda     PASS:    1 min  3.6 sec
              omap4-panda-es     PASS:    1 min  7.7 sec
  armada-xp-openblocks-ax3-4     FAIL:    0 min 30.3 sec
        sun4i-a10-cubieboard     PASS:    0 min 13.4 sec
                 bcm28155-ap     PASS:    1 min 14.5 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.3 sec
                 am335x-bone     PASS:    0 min 24.1 sec
             imx6q-wandboard     PASS:    0 min 16.4 sec
        omap3-tobi,3730storm     PASS:    0 min 23.3 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.6 sec
        omap3-tobi,3530overo     PASS:    0 min 20.6 sec
u8500_defconfig
---------------
                ste-snowball     FAIL:    0 min 31.6 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.4 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 21.9 sec
          armada-370-mirabox     PASS:    0 min 20.1 sec
Console logs for failures
=========================
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset
(user:khilman) Reboot cubie2
Reboot: cubie2 ; phidget 3 0 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset
(user:khilman) Reboot cubie2
Reboot: cubie2 ; phidget 3 0 :  ['off']
Reboot: cubie2 ; phidget 3 0 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset
(user:khilman) Reboot cubie2
Reboot: cubie2 ; phidget 3 0 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
phy16= 72 
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:
  3  0 
Marvell>> 
Marvell>> version
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>>setenv bootargs console=ttyS0,115200 debug earlyprintk
 setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Marvell>> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Marvell>> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Marvell>>dhcp
 dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound to address 192.168.1.183
Marvell>setenv serverip 192.168.1.2
...
setenv serverip 192.168.1.2
Marvell>> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-mqiE7u/tmpaR9Qra-uImage
tftp 0x02000000 192.168.1.2:tmp/mirabox-mqiE7u/tmpaR9Qra-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-mqiE7u/tmpaR9Qra-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     #################################################################
     ######################################################
done
Bytes transferred = 3654954 (37c52a hex)
Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 639808 (9c340 hex)
Marvell>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-05   5:07:00 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3654890 Bytes =  3.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.70 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
Net:   egiga0, egiga1, egiga2, egiga3
Hit any key to stop autoboot:
  1  0 
openblocks> 
openblocks> version
version
U-Boot 2011.12 (Aug 26 2013 - 13:08:34)
Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17)
arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease)
GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801
openblocks> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
openblocks>if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
openblocks> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
openblocks> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
openblocks> dhcp
dhcp
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.158
openblocks> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
openblocks> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
openblocks>tftp 0x02000000 192.168.1.2:tmp/obsax3-U3MiZJ/tmpcXGUH6-uImage
 tftp 0x02000000 192.168.1.2:tmp/obsax3-U3MiZJ/tmpcXGUH6-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.158
Filename 'tmp/obsax3-U3MiZJ/tmpcXGUH6-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #######################################################
done
Bytes transferred = 3659913 (37d889 hex)
openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.158
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 639808 (9c340 hex)
openblocks> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
openblocks> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-05   5:10:02 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3659849 Bytes = 3.5 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.29 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
Connected to snowball console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(snowball console)> hardreset
(user:khilman) Reboot snowball
Reboot: snowball ; ip9258 2 2 :  ('off', 6, 'on')
, sleep 6,
 0 
U8500 $ ~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.59 seconds.
# PYBOOT: Result: FAIL