Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.16-rc1-64-ga90a3ca/

Failed boards:

capri bcm_defconfig : FAILED 1:44.39 omap5uevm omap2plus_defconfig : FAILED 2:04.26 omap5uevm multi_lpae_defconfig : FAILED 2:12.81 snowball u8500_defconfig : FAILED 2:05.73

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:20.14 arndale exynos_defconfig : passed 1:14.62 arndale multi_v7_defconfig : passed 1:34.65 arndale multi_lpae_defconfig : passed 1:25.82 bbb omap2plus_defconfig : passed 1:29.28 bbb multi_v7_defconfig : passed 1:53.36 beaver tegra_defconfig : passed 0:52.31 beaver multi_v7_defconfig : passed 0:57.19 capri multi_v7_defconfig : passed 0:41.36 colombus sunxi_defconfig : passed 1:07.38 cubie sunxi_defconfig : passed 1:07.44 cubie multi_v7_defconfig : passed 1:36.23 cubie2 sunxi_defconfig : passed 1:14.02 cubie2 multi_v7_defconfig : passed 1:58.83 cubie2 multi_lpae_defconfig : passed 1:26.57 cubox multi_v7_defconfig : passed 1:12.99 dalmore tegra_defconfig : passed 1:19.22 dalmore multi_v7_defconfig : passed 1:25.02 dalmore multi_lpae_defconfig : passed 1:23.15 hummingboard imx_v6_v7_defconfig : passed 1:20.94 hummingboard multi_v7_defconfig : passed 1:11.14 jetsontk1 tegra_defconfig : passed 0:59.60 jetsontk1 multi_v7_defconfig : passed 0:57.23 jetsontk1 multi_lpae_defconfig : passed 0:56.99 panda omap2plus_defconfig : warnings 1:30.27 panda multi_v7_defconfig : warnings 1:50.93 seaboard tegra_defconfig : passed 1:14.60 seaboard multi_v7_defconfig : passed 1:20.85 snow exynos_defconfig : passed 0:59.33 snow multi_v7_defconfig : passed 1:30.51 snow multi_lpae_defconfig : passed 0:55.76 snowball multi_v7_defconfig : passed 4:54.96 trimslice tegra_defconfig : passed 1:04.36 trimslice multi_v7_defconfig : passed 1:25.57 wandboard imx_v6_v7_defconfig : passed 1:17.43 wandboard multi_v7_defconfig : passed 1:25.70

Offline boards:

colombus multi_v7_defconfig : OFFLINE 0:37.19 colombus multi_lpae_defconfig : OFFLINE 0:41.46 omap5uevm multi_v7_defconfig : OFFLINE 2:21.55 sama5 sama5_defconfig : OFFLINE 1:16.39

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board capri-bcm_defconfig failure log: -------------------------------------------------

[ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8...

[PYBOOT] [capri 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [capri 01:42]: got exception: timeout ~$off

[PYBOOT] [capri 01:43]: Done.

========================================================================

Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 47.072453] omap_vp_init: No PMIC info for vdd_core [ 47.072457] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072459] omap_vp_init: No PMIC info for vdd_mm [ 47.072462] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072463] omap_vp_init: No PMIC info for vdd_mpu [ 47.072779] ThumbEE CPU extension supported. [ 47.072793] Registering SWP/SWPB emulation handler [ 47.077471] palmas 0-0048: Irq flag is 0x00000000 [ 47.155777] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.156627] mmc0: new high speed MMC card at address 0001 [ 47.156880] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.161576] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.161664] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.162253] mmcblk0: unknown partition table [ 47.163041] mmcblk0boot1: unknown partition table [ 47.163779] mmcblk0boot0: unknown partition table [ 47.200598] smps123: 600 <--> 1500 mV at 1060 mV [ 47.206734] smps45: 600 <--> 1310 mV at 1030 mV [ 47.213154] smps6: 1200 mV [ 47.217120] smps7: 1800 mV [ 47.221227] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226971] smps9: failed to get the current voltage [ 47.232218] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.244273] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371760] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516769] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522850] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530316] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537174] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544890] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558371] ALSA device list: [ 47.561467] No soundcards found. [ 47.565466] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:12]: Done.

========================================================================

Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------

[ 1.951767] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951770] omap_vp_init: No PMIC info for vdd_mpu [ 1.952320] ThumbEE CPU extension supported. [ 1.952345] Registering SWP/SWPB emulation handler [ 1.952357] SmartReflex Class3 initialized [ 2.016448] palmas 0-0048: Irq flag is 0x00000000 [ 2.033899] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.040405] mmc0: new high speed MMC card at address 0001 [ 2.047581] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.052773] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.059235] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.068364] mmcblk0: unknown partition table [ 2.074970] mmcblk0boot1: unknown partition table [ 2.081713] mmcblk0boot0: unknown partition table [ 2.103757] smps123: 600 <--> 1500 mV at 1060 mV [ 2.110900] smps45: 600 <--> 1310 mV at 1030 mV [ 2.118243] smps6: 1200 mV [ 2.123027] smps7: 1800 mV [ 2.127980] smps8: 600 <--> 1310 mV at 1040 mV [ 2.134465] smps9: failed to get the current voltage [ 2.140455] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.154839] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.163699] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.171690] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.177753] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.186884] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.196267] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.203221] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.211720] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.220454] sr_init: No PMIC hook to init smartreflex [ 2.225914] sr_init: platform driver register failed for SR [ 2.254248] pbias_mmc_omap5: disabling [ 2.259776] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:03]: Done.

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.587768] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595092] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606567] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614379] HS USB OTG: no transceiver configured [ 3.619079] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.626922] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.634857] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646789] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654083] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665588] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674102] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686004] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693328] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.704803] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712615] HS USB OTG: no transceiver configured [ 3.717315] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725158] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733093] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745025] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752349] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.763824] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772338] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784240] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791564] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803039] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.810852] HS USB OTG: no transceiver configured [ 3.815551] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823425] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831329] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843261] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850555] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862030] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870544] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto

[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:03]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done.