Failed boards:

bbb multi_v7_defconfig : FAILED 1:21.31 panda multi_v7_defconfig : FAILED 1:37.79

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:15.18 arndale exynos_defconfig : passed 1:02.90 bbb omap2plus_defconfig : passed 1:31.44 beaver tegra_defconfig : passed 0:52.80 beaver multi_v7_defconfig : passed 0:58.19 capri bcm_defconfig : passed 0:42.60 capri multi_v7_defconfig : passed 0:44.22 cubie sunxi_defconfig : passed 0:50.12 cubie multi_v7_defconfig : passed 0:52.41 cubie2 sunxi_defconfig : passed 0:51.99 cubie2 multi_v7_defconfig : passed 0:59.97 cubie2 multi_lpae_defconfig : passed 0:52.60 cubox dove_defconfig : warnings 1:11.73 dalmore tegra_defconfig : passed 1:24.09 dalmore multi_v7_defconfig : passed 1:14.90 dalmore multi_lpae_defconfig : passed 1:16.75 panda omap2plus_defconfig : passed 1:19.46 sama5 sama5_defconfig : passed 1:55.71 seaboard tegra_defconfig : passed 1:01.53 seaboard multi_v7_defconfig : passed 1:09.00 snow exynos_defconfig : passed 1:21.49 snowball u8500_defconfig : passed 1:21.23 snowball multi_v7_defconfig : passed 2:06.80 trimslice tegra_defconfig : passed 1:01.28 trimslice multi_v7_defconfig : passed 0:58.58 wandboard imx_v6_v7_defconfig : passed 0:56.68 wandboard multi_v7_defconfig : passed 1:01.32

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-multi_v7_defconfig failure log: -------------------------------------------------

TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-876-g2e1cbf3/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350224 (426110 hex) U-Boot# setenv serverip 172.16.1.3 setenvnode: bbb status: on serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-876-g2e1cbf3/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-876-g2e1cbf3/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-876-g2e1cbf3/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 397.5 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6

Starting kernel ...

~$off # PYBOOT: Exception: timeout

========================================================================

Board panda-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.415161] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422515] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429962] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441864] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449554] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456359] usbcore: registered new interface driver usbhid [ 1.462219] usbhid: USB HID core driver [ 1.469207] TCP: cubic registered [ 1.472686] NET: Registered protocol family 17 [ 1.477569] Key type dns_resolver registered [ 1.482452] Power Management for TI OMAP4+ devices. [ 1.487609] Power Management for TI OMAP4. [ 1.491912] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.499267] Registering SWP/SWPB emulation handler [ 1.504943] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517730] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526367] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537872] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537872] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556884] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.564392] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575927] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583435] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594940] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602691] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610382] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617980] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.618072] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.631164] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638519] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646240] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.658111] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665710] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674621] spear_cpufreq: Invalid cpufreq_tbl [ 1.679290] ALSA device list: [ 1.679290] No soundcards found. [ 1.686187] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.686187] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout