Automated DT boot report for various ARM defconfigs.

Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').

Tree/Branch: linus/HEAD Git describe: v3.11-9013-gbf83e61 Commit: bf83e61464 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Failed boot tests (console logs at the end) =========================================== imx6q-wandboard: FAIL: arm-multi_v7_defconfig

Full Report ===========

arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 15.7 sec

arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 8.2 sec omap3-beagle-xm PASS: 0 min 52.0 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec omap3-tobi,3530overo PASS: 0 min 41.2 sec am335x-bone,am335xboneb PASS: 0 min 32.2 sec am335x-bone,am335xbone PASS: 0 min 33.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap4-panda PASS: 1 min 2.2 sec imx6q-wandboard FAIL: 0 min 0.0 sec omap3-tobi,3730storm PASS: 0 min 40.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 53.3 sec

arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.7 sec

arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 50.1 sec am335x-bone,am335xboneb PASS: 0 min 30.5 sec am335x-bone,am335xbone PASS: 0 min 26.8 sec omap3-tobi,3530overo PASS: 0 min 42.9 sec omap4-panda PASS: 1 min 6.0 sec omap4-panda-es PASS: 1 min 9.7 sec omap3-tobi,3730storm PASS: 0 min 42.3 sec omap3-beagle PASS: 0 min 50.0 sec

Console logs for failures =========================

arm-multi_v7_defconfig ----------------------

imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------

[ 1.009761] sit: IPv6 over IPv4 tunneling driver [ 1.014963] Key type dns_resolver registered [ 1.019385] Registering SWP/SWPB emulation handler [ 1.025417] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.030523] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.035440] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.056879] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.062891] hub 1-0:1.0: USB hub found [ 1.066687] hub 1-0:1.0: 1 port detected [ 1.070941] /work/kernel/jenkins/jobs/arm-mainline/workspace/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.082437] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1) [ 1.093745] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.077172] libphy: 2188000.ethernet:01 - Link is Up - 100/Full [ 4.096913] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.117120] IP-Config: Complete: [ 4.120367] device=eth0, hwaddr=00:1f:7b:b4:01:83, ipaddr=192.168.1.181, mask=255.255.255.0, gw=255.255.255.255 [ 4.130924] host=192.168.1.181, domain=, nis-domain=(none) [ 4.136873] bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= [ 4.143584] nameserver0=192.168.1.254, nameserver1=109.0.0.0 [ 4.150564] Waiting for root device /dev/mmcblk0p2... [ 60.317190] imx-sdma 2~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL