Automated DT boot report for various ARM defconfigs.
Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').
Tree/Branch: linus/HEAD Git describe: v3.11-6361-gfc8cc67 Commit: fc8cc67787 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide
Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard: FAIL: arm-imx_v6_v7_defconfig exynos5250-arndale: FAIL: arm-exynos_defconfig omap4-panda-es: FAIL: arm-omap2plus_defconfig omap3-beagle: FAIL: arm-omap2plus_defconfig
Full Report ===========
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard FAIL: 0 min 0.0 sec
arm-exynos_defconfig -------------------- exynos5250-arndale FAIL: 0 min 0.0 sec
arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 1 min 0.6 sec am335x-bone,am335xboneb PASS: 0 min 27.5 sec am335x-bone,am335xbone PASS: 0 min 29.0 sec omap3-tobi,3530overo PASS: 0 min 24.6 sec omap4-panda PASS: 1 min 4.6 sec omap4-panda-es FAIL: 0 min 0.0 sec omap3-tobi,3730storm PASS: 0 min 24.3 sec omap3-beagle FAIL: 0 min 0.0 sec
Console logs for failures =========================
arm-imx_v6_v7_defconfig -----------------------
imx6dl-wandboard: FAIL: last 24 lines of boot log: --------------------------------------------------
MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment
No panel detected: default to HDMI unsupported panel HDMI In: serial Out: serial Err: serial Net: FEC [PRIME] Warning: FEC using MAC address from net device
Hit any key to stop autoboot: 5 4 3 2 1 0 mmc0 is current device ** Unrecognized filesystem type **
MMC read: dev # 0, block # 2048, count 8704 ... 8704 blocks read: OK Booting from mmc ... ** Unrecognized filesystem type ** Wrong Image Format for bootm command ERROR: can't get kernel image! => ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
arm-exynos_defconfig --------------------
exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------
Connected to arndale console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(arndale console)> hardreset (user:jenkins) Reboot arndale Reboot: arndale ; phidget 2 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
arm-omap2plus_defconfig -----------------------
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
OMAP4460 ES1.1 Bypassing DPLL failed 4a008180 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img
U-Boot 2013.04 (May 24 2013 - 14:00:03)
CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment
In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3 2 1 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
omap3-beagle: FAIL: last 24 lines of boot log: ----------------------------------------------
416 bytes read in 4 ms (101.6 KiB/s) Importing environment from mmc ... OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org