mainline boot: 14 pass, 22 fail (v3.13-8905-g627f4b3) - Kernel-build-reports

28 Jan 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.13-8905-g627f4b3
Failed boot tests (console logs at the end)
===========================================
                 omap4-panda:     FAIL:    omap2plus_defconfig
              omap4-panda-es:     FAIL:    omap2plus_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    sunxi_defconfig
        sun4i-a10-cubieboard:     FAIL:    sunxi_defconfig
          exynos5250-arndale:     FAIL:    exynos_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
              tegra30-beaver:     FAIL:    multi_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     FAIL:    multi_v7_defconfig
                 omap4-panda:     FAIL:    multi_v7_defconfig
              omap4-panda-es:     FAIL:    multi_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                 bcm28155-ap:     FAIL:    multi_v7_defconfig
                 am335x-bone:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
                ste-snowball:     FAIL:    u8500_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    mvebu_defconfig
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 25.8 sec
             omap3-beagle-xm     PASS:    0 min 54.7 sec
                 am335x-bone     PASS:    0 min 27.4 sec
                 omap4-panda     FAIL:    0 min 56.0 sec
              omap4-panda-es     FAIL:    1 min 29.7 sec
        omap3-tobi,3730storm     PASS:    0 min 26.3 sec
        omap3-tobi,3530overo     PASS:    0 min 22.8 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     FAIL:    0 min 19.4 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.8 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.8 sec
             imx6q-wandboard     FAIL:    0 min 20.9 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     FAIL:    0 min 17.9 sec
        sun4i-a10-cubieboard     FAIL:    0 min 18.8 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    1 min  4.1 sec
exynos_defconfig
----------------
          exynos5250-arndale     FAIL:    0 min 31.4 sec
multi_v7_defconfig
------------------
                ste-snowball     FAIL:    0 min 32.2 sec
              tegra30-beaver     FAIL:    0 min 24.0 sec
            am335x-boneblack     PASS:    0 min 22.6 sec
             omap3-beagle-xm     PASS:    0 min 55.3 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 19.4 sec
          armada-370-mirabox     FAIL:    0 min 31.6 sec
                 omap4-panda     FAIL:    0 min 56.5 sec
              omap4-panda-es     FAIL:    1 min 17.5 sec
  armada-xp-openblocks-ax3-4     FAIL:    0 min 31.6 sec
        sun4i-a10-cubieboard     FAIL:    0 min 19.4 sec
                 bcm28155-ap     FAIL:    16 min 20.6 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.2 sec
                 am335x-bone     FAIL:    0 min 29.6 sec
             imx6q-wandboard     FAIL:    0 min 20.6 sec
        omap3-tobi,3730storm     PASS:    0 min 20.6 sec
  imx6dl-wandboard,wand-dual     FAIL:    0 min 22.1 sec
        omap3-tobi,3530overo     PASS:    0 min 21.1 sec
u8500_defconfig
---------------
                ste-snowball     FAIL:    0 min 28.4 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.5 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     FAIL:    0 min 31.6 sec
          armada-370-mirabox     FAIL:    0 min 31.6 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
2.9 KiB/s
done
Bytes transferred = 20616 (5088 hex)
Panda #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.97 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk vram=16M ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none nfsroot=192.168.1.2:/opt/kjh/rootfs/debian/armel,rsize=4096,wsize=4096
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
U-Boot SPL 2013.04 (May 24 2013 - 14:00:03)
OMAP4460 ES1.1
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 89.74 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i#bootz 0x40008000 0x42000000 0x41000000
 bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.41 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.90 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 17.95 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 18.78 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Connected to arndale console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(arndale console)> hardreset
(user:khilman) Reboot arndale
Reboot: arndale ; phidget 2 0 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     ##########################################################
done
Bytes transferred = 3711969 (38a3e1 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3711905 Bytes =  3.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 32.24 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
    ------------------------------------------------
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) #printenv bootargs
 printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 23.97 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.41 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.58 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
2.9 KiB/s
done
Bytes transferred = 20616 (5088 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 56.47 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
2.9 KiB/s
done
Bytes transferred = 20856 (5178 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk vram=16M ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none nfsroot=192.168.1.2:/opt/kjh/rootfs/debian/armel,rsize=4096,wsize=4096
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 77.53 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.60 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i#bootz 0x40008000 0x42000000 0x41000000
 bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.36 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log:
    ---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
    _call(self.context, command, ignore_failure, timeout)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
    context.run_command(cmd, failok=ignore_failure)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
    rc = subprocess.check_call(command, **output_args)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-01-28 06:30:19 PM INFO: CriticalError
<LAVA_DISPATCHER>2014-01-28 06:30:19 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
    action.run(**params)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
    raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 :  ['off']
<LAVA_DISPATCHER>2014-01-28 06:30:19 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D
<LAVA_DISPATCHER>2014-01-28 06:30:19 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/b398346f88797608175cf3d7ca579f811...
LBOOT: Result: FAIL
LBOOT: Time: 980.56 seconds.
am335x-bone: FAIL: last 24 lines of boot log:
    ---------------------------------------------
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8f19b000, end 8f237300 ... OK
   Using Device Tree in place at 81f00000, end 81f073a2
Starting kernel ...
Connected.
Connected.
Disconnected.
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.58 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.61 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
1.5 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.10 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     #####
done
Bytes transferred = 2934657 (2cc781 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2934593 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.39 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.55 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.55 seconds.
# PYBOOT: Result: FAIL