Failed boards:
cubie2 sunxi_defconfig : FAILED 1:21.01 cubie2 multi_v7_defconfig : FAILED 1:43.63 cubie2 multi_lpae_defconfig : FAILED 1:52.27 omap5uevm omap2plus_defconfig : FAILED 1:48.33 omap5uevm multi_v7_defconfig : FAILED 1:54.98 omap5uevm multi_lpae_defconfig : FAILED 1:43.51 snow multi_v7_defconfig : FAILED 1:13.31 snow multi_lpae_defconfig : FAILED 1:13.54 snowball u8500_defconfig : FAILED 1:50.33
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:12.26 arndale exynos_defconfig : passed 1:19.56 arndale multi_lpae_defconfig : passed 1:29.21 bbb omap2plus_defconfig : passed 1:30.06 bbb multi_v7_defconfig : passed 1:27.71 beaver tegra_defconfig : passed 0:59.62 beaver multi_v7_defconfig : passed 1:08.02 capri bcm_defconfig : passed 0:39.78 capri multi_v7_defconfig : passed 0:40.94 cubie sunxi_defconfig : passed 1:02.19 cubie multi_v7_defconfig : passed 1:29.35 cubox multi_v7_defconfig : passed 1:06.29 dalmore tegra_defconfig : passed 1:21.00 dalmore multi_v7_defconfig : warnings 2:30.76 dalmore multi_lpae_defconfig : passed 1:20.89 hummingboard imx_v6_v7_defconfig : passed 1:24.45 hummingboard multi_v7_defconfig : passed 1:30.09 jetson tegra_defconfig : passed 1:02.68 jetson multi_v7_defconfig : passed 0:56.45 jetson multi_lpae_defconfig : passed 0:59.09 panda omap2plus_defconfig : warnings 1:36.64 panda multi_v7_defconfig : warnings 2:01.33 sama5 sama5_defconfig : passed 1:54.95 seaboard tegra_defconfig : passed 1:12.38 seaboard multi_v7_defconfig : passed 1:10.49 snow exynos_defconfig : passed 1:30.73 snowball multi_v7_defconfig : passed 3:33.43 trimslice tegra_defconfig : passed 1:00.18 trimslice multi_v7_defconfig : passed 1:22.46 wandboard imx_v6_v7_defconfig : passed 1:02.96 wandboard multi_v7_defconfig : passed 1:19.20
Offline boards:
arndale multi_v7_defconfig : OFFLINE 1:21.77
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.329089] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338054] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347605] scsi0 : ahci_platform [ 1.351314] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360053] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365703] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373777] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379984] mmc0: new high speed SDHC card at address aaaa [ 1.385867] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392149] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397705] hub 1-0:1.0: USB hub found [ 1.401939] hub 1-0:1.0: 1 port detected [ 1.406034] mmcblk0: p1 [ 1.410333] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.416035] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.424009] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435355] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442311] hub 2-0:1.0: USB hub found [ 1.446166] hub 2-0:1.0: 1 port detected [ 1.451169] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457866] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465710] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530207] hub 3-0:1.0: USB hub found [ 1.534053] hub 3-0:1.0: 1 port detected [ 1.539058] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545772] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553612] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615176] hub 4-0:1.0: USB hub found [ 1.619016] hub 4-0:1.0: 1 port detected [ 1.623677] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711232] No MAC Management Counters available [ 1.716007] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722641] IP-Config: Failed to open eth0 [ 1.726766] IP-Config: No network devices available [ 1.731683] vcc3v0: disabling [ 1.734763] ALSA device list: [ 1.737742] No soundcards found. [ 1.741882] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.333125] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342676] scsi0 : ahci_platform [ 1.346392] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355135] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360786] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368836] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375040] mmc0: new high speed SDHC card at address aaaa [ 1.380913] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387188] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392750] hub 1-0:1.0: USB hub found [ 1.396999] hub 1-0:1.0: 1 port detected [ 1.401086] mmcblk0: p1 [ 1.405388] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411093] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419066] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430415] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437427] hub 2-0:1.0: USB hub found [ 1.441272] hub 2-0:1.0: 1 port detected [ 1.446290] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.452971] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460810] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525275] hub 3-0:1.0: USB hub found [ 1.529119] hub 3-0:1.0: 1 port detected [ 1.534152] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540869] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548710] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610246] hub 4-0:1.0: USB hub found [ 1.614084] hub 4-0:1.0: 1 port detected [ 1.618762] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.706291] No MAC Management Counters available [ 1.711064] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717684] IP-Config: Failed to open eth0 [ 1.721804] IP-Config: No network devices available [ 1.726722] vcc3v0: disabling [ 1.729804] ALSA device list: [ 1.732787] No soundcards found. [ 1.736945] ata1: SATA link down (SStatus 0 SControl 300) node: cubie2 status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.994086] mmc0: new high speed SDHC card at address aaaa [ 1.000014] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.006009] mmcblk0: p1 [ 1.016276] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023763] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029676] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038647] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047540] scsi0 : ahci_platform [ 1.051190] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059463] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.065060] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072930] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096199] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103177] hub 1-0:1.0: USB hub found [ 1.107014] hub 1-0:1.0: 1 port detected [ 1.111493] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117133] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124970] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146191] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.153081] hub 2-0:1.0: USB hub found [ 1.156902] hub 2-0:1.0: 1 port detected [ 1.161353] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.168028] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175871] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.241003] hub 3-0:1.0: USB hub found [ 1.244800] hub 3-0:1.0: 1 port detected [ 1.249319] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255952] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263824] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.331046] hub 4-0:1.0: USB hub found [ 1.334830] hub 4-0:1.0: 1 port detected [ 1.339197] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.426218] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442509] No MAC Management Counters available [ 1.447276] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453879] IP-Config: Failed to open eth0 [ 1.458004] IP-Config: No network devices available [ 1.462902] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.071622] can: raw protocol (rev 20120528) [ 47.071630] can: broadcast manager protocol (rev 20120528 t) [ 47.071642] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071952] Key type dns_resolver registered [ 47.072028] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072030] omap_vp_init: No PMIC info for vdd_core [ 47.072034] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072036] omap_vp_init: No PMIC info for vdd_mm [ 47.072039] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072041] omap_vp_init: No PMIC info for vdd_mpu [ 47.072350] ThumbEE CPU extension supported. [ 47.072365] Registering SWP/SWPB emulation handler [ 47.077495] palmas 0-0048: Irq flag is 0x00000000 [ 47.155307] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.161926] mmc0: new high speed MMC card at address 0001 [ 47.167868] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.172686] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.178971] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.185439] smps123: 600 <--> 1500 mV at 1060 mV [ 47.190719] mmcblk0: unknown partition table [ 47.196059] mmcblk0boot1: unknown partition table [ 47.201162] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206425] mmcblk0boot0: unknown partition table [ 47.212580] smps6: 1200 mV [ 47.216612] smps7: 1800 mV [ 47.220718] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226467] smps9: failed to get the current voltage [ 47.231717] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.243776] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371783] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516791] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522881] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530335] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537189] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544912] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558378] ALSA device list: [ 47.561476] No soundcards found. [ 47.565475] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.537741] NET: Registered protocol family 17 [ 47.537769] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547339] mmcblk0: unknown partition table [ 47.548112] mmcblk0boot1: unknown partition table [ 47.548872] mmcblk0boot0: unknown partition table [ 47.563129] can: controller area network core (rev 20120528 abi 9) [ 47.569629] NET: Registered protocol family 29 [ 47.574277] can: raw protocol (rev 20120528) [ 47.578740] can: broadcast manager protocol (rev 20120528 t) [ 47.584662] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590672] Key type dns_resolver registered [ 47.595202] omap_vc_init_channel: No PMIC info for vdd_core [ 47.601027] omap_vp_init: No PMIC info for vdd_core [ 47.606116] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.611759] omap_vp_init: No PMIC info for vdd_mm [ 47.616669] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622392] omap_vp_init: No PMIC info for vdd_mpu [ 47.627681] ThumbEE CPU extension supported. [ 47.632160] Registering SWP/SWPB emulation handler [ 47.638383] palmas 0-0048: Irq flag is 0x00000000 [ 47.646112] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653670] smps123: 600 <--> 1500 mV at 1060 mV [ 47.659802] smps45: 600 <--> 1310 mV at 1030 mV [ 47.666224] smps6: 1200 mV [ 47.670221] smps7: 1800 mV [ 47.674330] smps8: 600 <--> 1310 mV at 1040 mV [ 47.680050] smps9: failed to get the current voltage [ 47.685296] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697348] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.821972] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.966981] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.973073] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.980509] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.987368] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.995075] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.008501] ALSA device list: [ 48.011598] No soundcards found. [ 48.015597] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.040916] Key type dns_resolver registered [ 2.041012] omap_vc_init_channel: No PMIC info for vdd_core [ 2.041016] omap_vp_init: No PMIC info for vdd_core [ 2.041026] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.041029] omap_vp_init: No PMIC info for vdd_mm [ 2.041038] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.041041] omap_vp_init: No PMIC info for vdd_mpu [ 2.041587] ThumbEE CPU extension supported. [ 2.041611] Registering SWP/SWPB emulation handler [ 2.041620] SmartReflex Class3 initialized [ 2.106050] palmas 0-0048: Irq flag is 0x00000000 [ 2.123355] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.129765] mmc0: new high speed MMC card at address 0001 [ 2.137564] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.142656] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.149109] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.158794] mmcblk0: unknown partition table [ 2.165320] mmcblk0boot1: unknown partition table [ 2.172167] mmcblk0boot0: unknown partition table [ 2.193270] smps123: 600 <--> 1500 mV at 1060 mV [ 2.200246] smps45: 600 <--> 1310 mV at 1030 mV [ 2.207599] smps6: 1200 mV [ 2.212329] smps7: 1800 mV [ 2.217188] smps8: 600 <--> 1310 mV at 1040 mV [ 2.223675] smps9: failed to get the current voltage [ 2.229588] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.243894] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.252741] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.260654] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.266711] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.275872] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.285277] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.292242] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.300741] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.309385] sr_init: No PMIC hook to init smartreflex [ 2.314905] sr_init: platform driver register failed for SR [ 2.343138] pbias_mmc_omap5: disabling [ 2.348633] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.706321] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.706856] Console: colour dummy device 80x30 [ 2889.706868] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.706875] pid_max: default: 32768 minimum: 301 [ 2889.706937] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.706943] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.707215] CPU: Testing write buffer coherency: ok [ 2889.707324] CPU0: update cpu_power 1024 [ 2889.707330] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.707420] Setting up static identity map for 0x4081e4c0 - 0x4081e558 [ 2889.708515] CPU1: Booted secondary processor [ 2889.708551] CPU1: update cpu_power 1024 [ 2889.708554] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.708596] Brought up 2 CPUs [ 2889.708604] SMP: Total of 2 processors activated. [ 2889.708608] CPU: All CPU(s) started in HYP mode. [ 2889.708612] CPU: Virtualization extensions available. [ 2889.708852] devtmpfs: initialized [ 2889.710728] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.710914] pinctrl core: initialized pinctrl subsystem [ 2889.711111] regulator-dummy: no parameters [ 2889.717022] NET: Registered protocol family 16 [ 2889.717910] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.718617] cpuidle: using governor ladder [ 2889.718625] cpuidle: using governor menu [ 2889.723653] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.727502] No ATAGs? [ 2889.727520] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.727525] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.727619] EXYNOS5250 PMU Initialize [ 2889.728824] Serial: AMBA PL011 UART driver [ 2920.594294] edma-dma-engine edma-d~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.727853] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.728402] Console: colour dummy device 80x30 [ 2889.728412] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.728420] pid_max: default: 32768 minimum: 301 [ 2889.728480] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.728486] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.728754] CPU: Testing write buffer coherency: ok [ 2889.728863] CPU0: update cpu_power 1024 [ 2889.728869] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.728966] Setting up static identity map for 0x40817448 - 0x408174e0 [ 2889.730085] CPU1: Booted secondary processor [ 2889.730124] CPU1: update cpu_power 1024 [ 2889.730127] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.730173] Brought up 2 CPUs [ 2889.730182] SMP: Total of 2 processors activated. [ 2889.730186] CPU: All CPU(s) started in HYP mode. [ 2889.730189] CPU: Virtualization extensions available. [ 2889.730431] devtmpfs: initialized [ 2889.732330] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.732516] pinctrl core: initialized pinctrl subsystem [ 2889.732718] regulator-dummy: no parameters [ 2889.738594] NET: Registered protocol family 16 [ 2889.739456] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.740162] cpuidle: using governor ladder [ 2889.740170] cpuidle: using governor menu [ 2889.745236] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.749091] No ATAGs? [ 2889.749109] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.749114] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.749210] EXYNOS5250 PMU Initialize [ 2889.750410] Serial: AMBA PL011 UART driver [ 2920.594310] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594323] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594616] vbat-supply: n~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.538787] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550720] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.558044] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569519] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578094] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.590026] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597320] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608795] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616607] HS USB OTG: no transceiver configured [ 3.621337] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629180] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637115] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649047] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656341] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667816] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676422] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688354] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695648] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707153] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714965] HS USB OTG: no transceiver configured [ 3.719665] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727508] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735443] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747375] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754669] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766174] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774749] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786682] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794006] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805480] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813293] HS USB OTG: no transceiver configured [ 3.817993] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825836] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833770] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845703] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852996] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864501] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873046] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter