queue boot: 38 pass, 1 fail (v3.12.14) - Kernel-build-reports

11 Mar 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.12.14
Failed boot tests (console logs at the end)
===========================================
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
                   da850-evm     PASS:    0 min 14.8 sec
omap2plus_defconfig
-------------------
               legacy,3730xm     PASS:    0 min 51.5 sec
            am335x-boneblack     PASS:    0 min 24.9 sec
             omap3-beagle-xm     PASS:    0 min 58.6 sec
           legacy,3530beagle     PASS:    0 min 39.3 sec
                 omap4-panda     PASS:    1 min  3.8 sec
                  omap3-tobi     PASS:    0 min 22.4 sec
                 am335x-bone     PASS:    0 min 26.9 sec
              omap4-panda-es     PASS:    1 min  7.5 sec
            legacy,3730storm     PASS:    0 min 21.0 sec
            legacy,3530overo     PASS:    0 min 21.4 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     PASS:    0 min 13.8 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 16.9 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.9 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.7 sec
             imx6q-wandboard     PASS:    0 min 16.4 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 58.8 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 29.9 sec
multi_v7_defconfig
------------------
                ste-snowball     PASS:    0 min 28.6 sec
              tegra30-beaver     PASS:    0 min 16.6 sec
            am335x-boneblack     PASS:    0 min 32.3 sec
             omap3-beagle-xm     PASS:    0 min 56.7 sec
       sun7i-a20-cubieboard2     PASS:    0 min 13.7 sec
          armada-370-mirabox     PASS:    0 min 20.5 sec
                 omap4-panda     PASS:    1 min  9.5 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 22.8 sec
        sun4i-a10-cubieboard     PASS:    0 min 13.8 sec
                 bcm28155-ap     PASS:    1 min  9.4 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 16.9 sec
                  omap3-tobi     PASS:    0 min 20.5 sec
                 am335x-bone     PASS:    0 min 34.0 sec
             imx6q-wandboard     PASS:    0 min 16.4 sec
              omap4-panda-es     PASS:    1 min  2.7 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.3 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 33.9 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.3 sec
davinci_all_defconfig
---------------------
             legacy,dm365evm     PASS:    0 min 16.3 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 21.8 sec
          armada-370-mirabox     FAIL:    0 min 27.5 sec
Console logs for failures
=========================
mvebu_defconfig
---------------
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
phy16= 72 
phy16= 72 
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:
  3  0 
Marvell>> 
Marvell>version
...
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>setenv bootargs console=ttyS0,115200 debug earlyprintk
...
setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Marvell>> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Marvell>> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Marvell>dhcp
...
dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound to address 192.168.1.183
Marvell>> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Marvell>>if test -n ${netargs}; then run netargs; fi
 if test -n ${netargs}; then run netargs; fi
Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-bEQOLU/tmpfM63ng-uImage
tftp 0x02000000 192.168.1.2:tmp/mirabox-bEQOLU/tmpfM63ng-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-bEQOLU/tmpfM63ng-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     ###################################################
done
Bytes transferred = 2653637 (287dc5 hex)
Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 642602 (9ce2a hex)
Marvell>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-03-11  20:25:02 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2653573 Bytes =  2.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.54 seconds.
# PYBOOT: Result: FAIL