Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.8-1558-g21f54dd/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 1:08.25 beaver arm-tegra_defconfig : FAILED 1:44.83 beaver arm-multi_v7_defconfig : FAILED 2:10.38 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:47.09 capri bcm_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 2:00.71 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:22.22 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:57.45 hummingboard arm-multi_v7_defconfig : FAILED 2:14.05 hummingboard arm-multi_v7_nosmp_defconfig : FAILED 1:47.00 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:57.12 omap5uevm arm-multi_v7_defconfig : FAILED 2:07.92 omap5uevm arm-multi_lpae_defconfig : FAILED 0:58.18 pi arm-exynos_defconfig : FAILED 1:52.40 pi arm-multi_v7_defconfig : FAILED 2:26.26 pi arm-multi_lpae_defconfig : FAILED 2:28.74 pit arm-exynos_defconfig : FAILED 1:49.52 snow arm-exynos_defconfig : FAILED 2:20.70 wandboard arm-imx_v6_v7_defconfig : FAILED 3:00.10
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:41.39 arndale arm-exynos_defconfig : passed 1:30.27 arndale arm-multi_v7_defconfig : passed 2:11.29 arndale arm-multi_lpae_defconfig : passed 2:03.58 bbb arm-omap2plus_defconfig : passed 1:45.08 bbb arm-multi_v7_defconfig : passed 1:38.30 bbb arm-multi_v7_nosmp_defconfig : passed 1:47.22 beagleboard-x15 arm-omap2plus_defconfig : passed 0:49.94 beagleboard-x15 arm-multi_v7_defconfig : passed 1:00.51 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:53.07 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:08.13 capri arm-multi_v7_defconfig : passed 1:08.54 capri arm-multi_v7_nosmp_defconfig : warnings 1:04.93 chitra powerpc-pasemi_defconfig : passed 1:46.86 colombus arm-sunxi_defconfig : passed 2:14.40 colombus arm-multi_v7_defconfig : passed 2:34.35 colombus arm-multi_lpae_defconfig : passed 2:12.60 cosmic arm-imx_v6_v7_defconfig : passed 3:24.84 cosmic arm-multi_v7_defconfig : passed 2:58.41 cosmic arm-multi_v7_nosmp_defconfig : passed 2:41.67 cubie arm-sunxi_defconfig : passed 0:52.71 cubie arm-multi_v7_defconfig : passed 1:05.02 cubie arm-multi_v7_nosmp_defconfig : passed 0:55.54 cubie2 arm-sunxi_defconfig : passed 1:00.18 cubie2 arm-multi_v7_defconfig : passed 1:14.73 cubie2 arm-multi_lpae_defconfig : passed 1:06.29 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:09.17 cubox arm-multi_v7_defconfig : passed 1:32.65 cubox arm-mvebu_v7_defconfig : passed 1:27.07 cubox arm-multi_v7_nosmp_defconfig : passed 1:17.31 dalmore arm-tegra_defconfig : passed 1:35.36 dalmore arm-multi_v7_defconfig : passed 1:49.20 dalmore arm-multi_lpae_defconfig : passed 2:30.48 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:36.59 jetsontk1 arm-tegra_defconfig : passed 0:51.56 jetsontk1 arm-multi_v7_defconfig : passed 0:48.90 jetsontk1 arm-multi_lpae_defconfig : passed 0:58.64 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:52.48 omap5uevm arm-omap2plus_defconfig : passed 1:09.36 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 2:04.56 pandaes arm-omap2plus_defconfig : warnings 1:56.72 pandaes arm-multi_v7_defconfig : passed 1:56.16 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:41.54 parallella arm-multi_v7_defconfig : passed 2:55.20 parallella arm-multi_v7_nosmp_defconfig : warnings 2:42.09 pi arm-multi_v7_nosmp_defconfig : warnings 3:07.05 pit arm-multi_v7_defconfig : passed 2:31.81 pit arm-multi_v7_nosmp_defconfig : warnings 2:12.62 sama5d3-xplained arm-sama5_defconfig : passed 1:44.68 seaboard arm-tegra_defconfig : passed 1:03.82 seaboard arm-multi_v7_defconfig : passed 1:09.48 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:31.73 seattle arm64-defconfig : warnings 2:44.43 snow arm-multi_v7_defconfig : passed 2:12.70 snow arm-multi_lpae_defconfig : passed 2:02.72 snow arm-multi_v7_nosmp_defconfig : warnings 2:00.87 snowball arm-u8500_defconfig : passed 1:11.94 snowball arm-multi_v7_defconfig : passed 1:25.12 snowball arm-multi_v7_nosmp_defconfig : warnings 2:19.93 socfpga arm-socfpga_defconfig : passed 1:29.15 socfpga arm-multi_v7_defconfig : passed 1:38.81 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:28.02 trimslice arm-tegra_defconfig : passed 1:54.38 trimslice arm-multi_v7_defconfig : passed 4:02.24 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:33.57 wandboard arm-multi_v7_defconfig : passed 1:26.79 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.10
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:20.53 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:45.39 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:36.33 pit arm-multi_lpae_defconfig : OFFLINE 3:15.10 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:58.80 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:37.21 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:46.18 sama5 arm-sama5_defconfig : OFFLINE 2:36.42
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.152819] MAIN_DC: disabling [ 2.155250] hdmi-en: disabling [ 2.158326] mmcblk0: mmc0:0001 M4G1FA 3.73 GiB [ 2.163278] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.169929] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB [ 2.176053] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB [ 2.182878] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB [ 2.187836] Unable to handle kernel paging request at virtual address c1202d08 [ 2.194342] pgd = c0204000 [ 2.197032] [c1202d08] *pgd=4120041e(bad) [ 2.201027] Internal error: Oops: 8000000d [#1] ARM [ 2.205886] Modules linked in: [ 2.208927] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.8.0-01558-g21f54dd #1 [ 2.217082] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.223159] task: c1105fb8 task.stack: c1100000 [ 2.227674] PC is at 0xc1202d08 [ 2.230803] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 2.235399] pc : [<c1202d08>] lr : [<c0a3a308>] psr: 600001d3 [ 2.235399] sp : c1101f88 ip : 00000000 fp : 000000a0 [ 2.246856] r10: 00000000 r9 : 00000001 r8 : c1203850 [ 2.252064] r7 : c1203810 r6 : c1202d10 r5 : 00000000 r4 : c110212c [ 2.258573] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 [ 2.265085] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 2.272375] Control: 10c53c7d Table: 40204059 DAC: 00000051 [ 2.278103] Process swapper (pid: 0, stack limit = 0xc1100218) [ 2.283919] Stack: (0xc1101f88 to 0xc1102000) [ 2.288262] 1f80: c1210fa2 c1102134 c1202d10 c12037b0 c1101fac c0b4b8e4 [ 2.296421] 1fa0: c1100000 c110212c c1101fb4 c0b4baec 00000000 c035b854 ffffffff c1000c40 [ 2.304580] 1fc0: ffffffff ffffffff 00000000 c1000684 00000000 c1091a28 c12131d4 c11020b4 [ 2.312739] 1fe0: c1091a24 c110719c 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 2.320908] [<c0a3a308>] (cpu_pm_pmu_notify) from [<c0b4b8e4>] (schedule+0x44/0x9c) [ 2.328539] Code: c1202cf4 c1202e40 c1202e40 00000000 (c1202d10) [ 2.334613] ---[ end trace 515156af252412e0 ]--- [ 2.339212] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.345896] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [arndale 01:06]: got exception: panic ~$off
[PYBOOT] [arndale 01:07]: Done.
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.308090] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.315048] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.321568] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.328523] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.334109] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.340865] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.350868] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.362486] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.369103] [drm] No driver support for vblank timestamp query. [ 3.375039] drm drm: No connectors reported connected with modes [ 3.381043] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.407172] Console: switching to colour frame buffer device 128x48 [ 3.419135] drm drm: fb0: frame buffer device [ 3.438951] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.449758] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.456225] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.461634] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.469460] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.488661] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.495723] hub 1-0:1.0: USB hub found [ 3.499496] hub 1-0:1.0: 1 port detected [ 3.504408] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.509821] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.517567] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.538657] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.545620] hub 2-0:1.0: USB hub found [ 3.549387] hub 2-0:1.0: 1 port detected [ 3.559178] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.568774] vdd_sata,avdd_plle: disabling [ 3.573428] usb1_vbus: disabling [ 3.577229] Waiting for root device /dev/mmcblk0p1... [ 3.883659] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.880747] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 02:08]: got exception: timeout ~$off
[PYBOOT] [beaver 02:09]: Done.
========================================================================
Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.237772] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.244726] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.251242] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.258200] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.263782] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.270447] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.280440] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.290834] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.297449] [drm] No driver support for vblank timestamp query. [ 3.303384] drm drm: No connectors reported connected with modes [ 3.309387] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.328757] Console: switching to colour frame buffer device 128x48 [ 3.340537] drm drm: fb0: frame buffer device [ 3.344976] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.355219] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.361675] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.367081] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.374867] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.393145] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.399518] hub 1-0:1.0: USB hub found [ 3.403281] hub 1-0:1.0: 1 port detected [ 3.408053] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.413462] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.421116] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.438141] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.444455] hub 2-0:1.0: USB hub found [ 3.448216] hub 2-0:1.0: 1 port detected [ 3.455737] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.465283] vdd_sata,avdd_plle: disabling [ 3.469645] usb1_vbus: disabling [ 3.473340] Waiting for root device /dev/mmcblk0p1... [ 3.778144] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.766635] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:45]: got exception: timeout ~$off
[PYBOOT] [beaver 01:46]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.994207] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.001276] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.006876] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.014459] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.024466] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.036800] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.043443] [drm] No driver support for vblank timestamp query. [ 7.049386] drm drm: No connectors reported connected with modes [ 7.055398] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.081067] Console: switching to colour frame buffer device 128x48 [ 7.092856] drm drm: fb0: frame buffer device [ 7.130723] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.139894] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.146393] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.151826] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.159775] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.190724] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.198241] hub 1-0:1.0: USB hub found [ 7.202041] hub 1-0:1.0: 1 port detected [ 7.206778] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.212201] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.220063] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.250713] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.258083] hub 2-0:1.0: USB hub found [ 7.261869] hub 2-0:1.0: 1 port detected [ 7.270020] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.279509] vdd_sata,avdd_plle: disabling [ 7.283909] usb1_vbus: disabling [ 7.287129] ALSA device list: [ 7.290084] #0: NVIDIA Tegra Beaver [ 7.294168] Waiting for root device /dev/mmcblk0p1... [ 7.620720] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.706094] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:44]: Done.
========================================================================
Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
PID hash table entries: 4096 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 4023616K/4194304K available (10020K kernel code, 1756K rwdata, 3436K rodata, 4216K init, 1059K bss, 170688K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack d [PYBOOT] [chitra 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:58]: got exception: timeout ~$off
[PYBOOT] [chitra 01:59]: Done.
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 44.176416] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 44.191247] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 92.158635] eth0: device MAC address 3a:e1:3d:4a:ff:8f [ 92.196238] RX IPC Checksum Offload disabled [ 92.200858] No MAC Management Counters available [ 92.206604] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/3a:e1:3d:4a:ff:8f Sending on LPF/eth0/3a:e1:3d:4a:ff:8f Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 1 No DHCPOFFERS received. No working leases in persistent database - sleeping.
[PYBOOT] [colombus 03:19]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:20]: got exception: timeout ~$off
[PYBOOT] [colombus 03:21]: Done.
========================================================================
Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 3.522242] usbcore: registered new interface driver usbhid [ 3.527861] usbhid: USB HID core driver [ 3.539250] sgtl5000 0-000a: Error reading chip id -6 [ 3.544665] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.563694] fsl-asoc-card sound-sgtl5000: ASoC: CPU DAI (null) not registered [ 3.570861] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.599242] mmc1: new high speed SDHC card at address b368 [ 3.610332] fsl-asrc 2034000.asrc: driver registered [ 3.623097] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.631443] mmcblk1: mmc1:b368 00000 7.51 GiB [ 3.639543] mmcblk1: p1 p2 [ 4.275048] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 4.284456] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 4.300361] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.329298] NET: Registered protocol family 10 [ 4.336873] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.344968] NET: Registered protocol family 17 [ 4.349462] can: controller area network core (rev 20120528 abi 9) [ 4.355859] NET: Registered protocol family 29 [ 4.360340] can: raw protocol (rev 20120528) [ 4.364736] can: broadcast manager protocol (rev 20160617 t) [ 4.370429] can: netlink gateway (rev 20130117) max_hops=1 [ 4.376615] Key type dns_resolver registered [ 4.385335] Registering SWP/SWPB emulation handler [ 4.433488] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 4.445905] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 4.453458] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 4.460843] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 4.468286] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 4.477237] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.541556] ALSA device list: [ 4.544544] #0: On-board SPDIF [ 4.549299] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [hummingboard 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:55]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:56]: Done.
========================================================================
Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.260419] i2c /dev entries driver [ 1.274044] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.283800] sdhci: Secure Digital Host Controller Interface driver [ 1.290023] sdhci: Copyright(c) Pierre Ossman [ 1.296213] Synopsys Designware Multimedia Card Interface Driver [ 1.303481] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.310103] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq [ 1.570932] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.578728] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.587922] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.641016] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.650999] ledtrig-cpu: registered to indicate activity on CPUs [ 1.659381] usbcore: registered new interface driver usbhid [ 1.664992] usbhid: USB HID core driver [ 1.672497] NET: Registered protocol family 10 [ 1.679887] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.686513] NET: Registered protocol family 17 [ 1.691006] can: controller area network core (rev 20120528 abi 9) [ 1.697264] NET: Registered protocol family 29 [ 1.701731] can: raw protocol (rev 20120528) [ 1.706019] can: broadcast manager protocol (rev 20160617 t) [ 1.711702] can: netlink gateway (rev 20130117) max_hops=1 [ 1.717631] Key type dns_resolver registered [ 1.722089] ThumbEE CPU extension supported. [ 1.726392] Registering SWP/SWPB emulation handler [ 1.747524] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.757404] hctosys: unable to open rtc device (rtc0) [ 1.798471] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.812339] mmc1: new high speed SDHC card at address b368 [ 1.818336] mmcblk1: mmc1:b368 00000 7.51 GiB [ 1.824299] mmcblk1: p1 p2 [ 1.828092] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.836457] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [hummingboard 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 02:12]: got exception: timeout ~$off
[PYBOOT] [hummingboard 02:13]: Done.
========================================================================
Board hummingboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.241328] mousedev: PS/2 mouse device common for all mice [ 1.249962] i2c /dev entries driver [ 1.261911] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.271061] sdhci: Secure Digital Host Controller Interface driver [ 1.277271] sdhci: Copyright(c) Pierre Ossman [ 1.283126] Synopsys Designware Multimedia Card Interface Driver [ 1.290235] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.296798] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq [ 1.556594] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.564330] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.573509] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.626659] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.636063] ledtrig-cpu: registered to indicate activity on CPUs [ 1.642404] usbcore: registered new interface driver usbhid [ 1.647998] usbhid: USB HID core driver [ 1.654768] NET: Registered protocol family 10 [ 1.662115] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.668588] NET: Registered protocol family 17 [ 1.673066] can: controller area network core (rev 20120528 abi 9) [ 1.679310] NET: Registered protocol family 29 [ 1.683768] can: raw protocol (rev 20120528) [ 1.688048] can: broadcast manager protocol (rev 20160617 t) [ 1.693719] can: netlink gateway (rev 20130117) max_hops=1 [ 1.699584] Key type dns_resolver registered [ 1.704010] ThumbEE CPU extension supported. [ 1.721166] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.732716] hctosys: unable to open rtc device (rtc0) [ 1.774059] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.787886] mmc1: new high speed SDHC card at address b368 [ 1.793755] mmcblk1: mmc1:b368 00000 7.51 GiB [ 1.799622] mmcblk1: p1 p2 [ 1.803255] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.821988] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [hummingboard 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:45]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:46]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.701480] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.708107] NET: Registered protocol family 17 [ 1.713047] NET: Registered protocol family 15 [ 1.715587] Key type dns_resolver registered [ 1.719922] Registering SWP/SWPB emulation handler [ 1.737644] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.739958] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.747380] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.754513] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.761102] [drm] No driver support for vblank timestamp query. [ 1.766731] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.766736] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.767222] hub 1-3:1.0: USB hub found [ 1.767352] hub 1-3:1.0: 3 ports detected [ 1.773688] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.798259] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.804710] mmc1: new DDR MMC card at address 0001 [ 1.809342] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.813560] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.819447] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.825329] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.831810] mmcblk1: p1 p2 [ 1.841966] max98090 1-0010: MAX98090 REVID=0x43 [ 1.844312] max98090 1-0010: use default 2.8v micbias [ 1.852049] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.855280] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.892686] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:23 UTC (946688423) [ 1.897332] VDD10_HDMI_1.0V: disabling [ 1.900566] vdd_g3d: disabling [ 1.903382] BUCK8_P3V3: disabling [ 1.906441] ALSA device list: [ 1.909000] #0: Odroid-U3 [ 1.912521] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:55]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.307034] 1e80: 7340002f c1201ea0 c038889c c03887e8 a0000193 ffffffff [ 2.307039] [<c030c478>] (__dabt_svc) from [<c03887e8>] (__handle_irq_event_percpu+0x8c/0x124) [ 2.307044] [<c03887e8>] (__handle_irq_event_percpu) from [<c038889c>] (handle_irq_event_percpu+0x1c/0x58) [ 2.307049] [<c038889c>] (handle_irq_event_percpu) from [<c038891c>] (handle_irq_event+0x44/0x68) [ 2.307054] [<c038891c>] (handle_irq_event) from [<c038bd64>] (handle_fasteoi_irq+0xb4/0x194) [ 2.307059] [<c038bd64>] (handle_fasteoi_irq) from [<c0387b24>] (generic_handle_irq+0x24/0x34) [ 2.307064] [<c0387b24>] (generic_handle_irq) from [<c0388048>] (__handle_domain_irq+0x5c/0xb4) [ 2.307068] [<c0388048>] (__handle_domain_irq) from [<c0301780>] (gic_handle_irq+0x54/0x98) [ 2.307072] [<c0301780>] (gic_handle_irq) from [<c030c50c>] (__irq_svc+0x6c/0x90) [ 2.307074] Exception stack(0xc1201f50 to 0xc1201f98) [ 2.307077] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.307081] 1f60: c1200000 c12024a4 00000001 00000000 00000000 c1116080 c1202510 c1202508 [ 2.307084] 1f80: 60000013 c1201fa0 c032b878 c0308740 a0000013 ffffffff [ 2.307090] [<c030c50c>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.307096] [<c0308740>] (arch_cpu_idle) from [<c037b168>] (cpu_startup_entry+0x1cc/0x228) [ 2.307104] [<c037b168>] (cpu_startup_entry) from [<c1000c50>] (start_kernel+0x374/0x380) [ 2.307109] [<c1000c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.307114] Code: 3afffff6 e8bd8070 e30f32b0 e34c3123 (e593200c) [ 2.307119] ---[ end trace 3ad0fd4c8814372d ]--- [ 2.307121] Kernel panic - not syncing: Fatal exception in interrupt [ 2.307126] CPU1: stopping [ 2.307130] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.8.0-01558-g21f54dd #1 [ 2.307131] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.307139] [<c031043c>] (unwind_backtrace) from [<c030b96c>] (show_stack+0x10/0x14) [ 2.307145] [<c030b96c>] (show_stack) from [<c0599b3c>] (dump_stack+0x88/0x9c) [ 2.307151] [<c0599b3c>] (dump_stack) from [<c030eb9c>] (handle_IPI+0x174/0x194) [ 2.307156] [<c030eb9c>] (handle_IPI) from [<c03017c0>] (gic_handle_irq+0x94/0x98) [ 2.307160] [<c03017c0>] (gic_handle_irq) from [<c030c50c>] (__irq_svc+0x6c/0x90) [ 2.307162] Exception stack(0xee09bf88 to 0xee09bfd0) [ 2.307166] bf80: 00000001 00000000 ea000013 f0880000 ee09a000 c12024a4 [ 2.307170] bfa0: 00000002 00000000 00000000 c1116080 c1202510 c1202508 60000013 ee09bfd8 [ 2.307176] 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000[<c030c50c>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.307189] [<c0308740>] (arch_cpu_idle) from [<c037b168>] (cpu_startup_entry+0x1cc/0x228) [ 2.307193] [<c037b168>] (cpu_startup_entry) from [<80301c6c>] (0x80301c6c) [ 3.254762] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:54]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:55]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.126231] sp : c1201f18 ip : 2deb3000 fp : c1202508 [ 2.138208] r10: c1202510 r9 : fa213000 r8 : ee008000 [ 2.143657] r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : c1114fb0 [ 2.150462] r3 : fffffd74 r2 : eefc6420 r1 : c1237844 r0 : 2deb3000 [ 2.156744] Unable to handle kernel paging request at virtual address 41311000 [ 2.156746] pgd = c0204000 [ 2.156749] [41311000] *pgd=00000000 [ 2.171340] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.178874] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.184864] Process swapper/0 (pid: 0, stack limit = 0xc1200220) [ 2.191130] Stack: (0xc1201f18 to 0xc1202000) [ 2.195670] 1f00: c1202898 c123fa48 [ 2.204202] 1f20: fa21200c c1201f50 fa212000 c0301780 c0308740 a0000013 ffffffff c1201f84 [ 2.212740] 1f40: 00000000 c1200000 c1202510 c030c50c 00000001 00000000 ea000013 f0880000 [ 2.221270] 1f60: c1200000 c12024a4 00000001 00000000 00000000 c1116080 c1202510 c1202508 [ 2.229804] 1f80: 2deb3000 c1201fa0 c032b878 c0308740 a0000013 ffffffff 00000051 00000000 [ 2.238333] 1fa0: c1200000 c037b168 c1201fa8 c131003f 00000000 ffffffff 00000000 c1000c50 [ 2.246866] 1fc0: ffffffff ffffffff 00000000 c1000684 00000000 c10a6a30 c13125d4 c1202480 [ 2.255391] 1fe0: c10a6a2c c1207630 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.263922] [<c0394e74>] (rcu_eqs_enter_common.constprop.21) from [<c038804c>] (__handle_domain_irq+0x60/0xb4) [ 2.274357] [<c038804c>] (__handle_domain_irq) from [<c0301780>] (gic_handle_irq+0x54/0x98) [ 2.283073] [<c0301780>] (gic_handle_irq) from [<c030c50c>] (__irq_svc+0x6c/0x90) [ 2.290879] Exception stack(0xc1201f50 to 0xc1201f98) [ 2.296142] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.304668] 1f60: c1200000 c12024a4 00000001 00000000 00000000 c1116080 c1202510 c1202508 [ 2.313199] 1f80: 2deb3000 c1201fa0 c032b878 c0308740 a0000013 ffffffff [ 2.320098] [<c030c50c>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.327815] [<c0308740>] (arch_cpu_idle) from [<c037b168>] (cpu_startup_entry+0x1cc/0x228) [ 2.336444] [<c037b168>] (cpu_startup_entry) from [<c1000c50>] (start_kernel+0x374/0x380) [ 2.344977] [<c1000c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.351787] Code: e1530001 e2433fa3 e0822000 0a000003 (e593328c) [ 2.358145] ---[ end trace 3fcc63b2720ce0ae ]--- [ 2.358147] Internal error: Oo[ 2.358151] Modules linked in: [ 2.358155] CPU [PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:07]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 21.289175] BUG: spinlock lockup suspected on CPU#0, kworker/0:4/69 [ 21.293957] lock: 0xee737840, .magic: dead4ead, .owner: kworker/0:4/69, .owner_cpu: 0 [ 21.301850] CPU: 0 PID: 69 Comm: kworker/0:4 Tainted: G D 4.8.0-01558-g21f54dd #1 [ 21.310437] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.316520] [<c010e0ac>] (unwind_backtrace) from [<c010ad28>] (show_stack+0x10/0x14) [ 21.324236] [<c010ad28>] (show_stack) from [<c032d620>] (dump_stack+0x78/0x8c) [ 21.331437] [<c032d620>] (dump_stack) from [<c015b088>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.339242] [<c015b088>] (do_raw_spin_lock) from [<c06e3d7c>] (__schedule+0x7c/0x480) [ 21.347049] [<c06e3d7c>] (__schedule) from [<c06e41cc>] (schedule+0x4c/0xac) [ 21.354075] [<c06e41cc>] (schedule) from [<c011dabc>] (do_exit+0x854/0xa18) [ 21.361015] [<c011dabc>] (do_exit) from [<c010af64>] (die+0x238/0x2f4) [ 21.367524] [<c010af64>] (die) from [<c0114ef8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.375418] [<c0114ef8>] (__do_kernel_fault.part.0) from [<c01108e8>] (do_bad_area+0x0/0x8c) [ 21.383831] [<c01108e8>] (do_bad_area) from [<c0110654>] (do_page_fault+0x0/0x294) [ 21.391376] [<c0110654>] (do_page_fault) from [<edb0fb9b>] (0xedb0fb9b) [ 21.397969] Sending NMI to all CPUs: [ 21.401524] NMI backtrace for cpu 0 [ 21.404996] CPU: 0 PID: 69 Comm: kworker/0:4 Tainted: G D 4.8.0-01558-g21f54dd #1 [ 21.413583] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.419663] [<c010e0ac>] (unwind_backtrace) from [<c010ad28>] (show_stack+0x10/0x14) [ 21.427379] [<c010ad28>] (show_stack) from [<c032d620>] (dump_stack+0x78/0x8c) [ 21.434580] [<c032d620>] (dump_stack) from [<c0330f80>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.442386] [<c0330f80>] (nmi_cpu_backtrace) from [<c010c9f4>] (raise_nmi+0x60/0x64) [ 21.450107] [<c010c9f4>] (raise_nmi) from [<c0330f00>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.459042] [<c0330f00>] (nmi_trigger_all_cpu_backtrace) from [<c015b090>] (do_raw_spin_lock+0x104/0x1d8) [ 21.468585] [<c015b090>] (do_raw_spin_lock) from [<c06e3d7c>] (__schedule+0x7c/0x480) [ 21.476393] [<c06e3d7c>] (__schedule) from [<c06e41cc>] (schedule+0x4c/0xac) [ 21.483419] [<c06e41cc>] (schedule) from [<c011dabc>] (do_exit+0x854/0xa18) [ 21.490359] [<c011dabc>] (do_exit) from [<c010af64>] (die+0x238/0x2f4) [ 21.496866] [<c010af64>] (die) from [<c0114ef8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.504760] [<c0114ef8>] (__do_kernel_fault.part.0) from [<c01108e8>] (do_bad_area+0x0/0x8c) [ 21.513174] [<c01108e8>] (do_bad_area) from [<c0110654>] (do_page_fault+0x0/0x294) [ 21.520721] [<c0110654>] (do_page_fault) from [<edb0fb9b>] (0xedb0fb9b)
[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:51]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.563478] can: controller area network core (rev 20120528 abi 9) [ 1.569691] NET: Registered protocol family 29 [ 1.574077] can: raw protocol (rev 20120528) [ 1.578308] can: broadcast manager protocol (rev 20160617 t) [ 1.583968] can: netlink gateway (rev 20130117) max_hops=1 [ 1.589693] Key type dns_resolver registered [ 1.594029] ThumbEE CPU extension supported. [ 1.597918] Registering SWP/SWPB emulation handler [ 1.625383] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.630883] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.637231] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.642605] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.652004] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.662755] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.668878] mmc0: tuning execution failed: -5 [ 1.672880] mmc0: error -5 whilst initialising MMC card [ 1.687501] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.693083] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.699362] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.704714] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.714106] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.723177] Waiting for root device /dev/mmcblk0p1... [ 2.575728] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.593239] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.598672] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.605076] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.610454] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 5.284686] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.289835] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.305686] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.311115] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.317518] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.322900] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:23]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:24]: got exception: timeout ~$off
[PYBOOT] [pi 02:25]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.564069] can: controller area network core (rev 20120528 abi 9) [ 1.570284] NET: Registered protocol family 29 [ 1.574668] can: raw protocol (rev 20120528) [ 1.578899] can: broadcast manager protocol (rev 20160617 t) [ 1.584560] can: netlink gateway (rev 20130117) max_hops=1 [ 1.590283] Key type dns_resolver registered [ 1.594622] ThumbEE CPU extension supported. [ 1.598508] Registering SWP/SWPB emulation handler [ 1.626139] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.631639] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.637987] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.643361] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.652760] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.663513] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.669681] mmc0: tuning execution failed: -5 [ 1.673636] mmc0: error -5 whilst initialising MMC card [ 1.688263] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.693847] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.700109] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.705478] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.714882] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.723965] Waiting for root device /dev/mmcblk0p1... [ 2.581268] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598834] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.604278] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.610667] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.616050] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 5.285227] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.290382] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.306302] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.311732] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.318134] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.323517] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:21]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:22]: got exception: timeout ~$off
[PYBOOT] [pi 02:23]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.642636] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.648335] s5p-secss 10830000.sss: s5p-sss driver registered [ 2.649155] usbcore: registered new interface driver usbhid [ 2.649158] usbhid: USB HID core driver [ 2.671290] ntc-thermistor 12d10000.adc:thermistor3: Thermistor type: ncp15wb473 successfully probed. [ 2.682302] mmc1: new high speed SDIO card at address 0001 [ 2.688262] ntc-thermistor 12d10000.adc:thermistor4: Thermistor type: ncp15wb473 successfully probed. [ 2.697459] ntc-thermistor 12d10000.adc:thermistor5: Thermistor type: ncp15wb473 successfully probed. [ 2.706715] ntc-thermistor 12d10000.adc:thermistor6: Thermistor type: ncp15wb473 successfully probed. [ 2.718838] snow-audio sound: ASoC: CPU DAI (null) not registered [ 2.723495] snow-audio sound: snd_soc_register_card failed (-517) [ 2.730570] NET: Registered protocol family 10 [ 2.739634] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.744682] NET: Registered protocol family 17 [ 2.748540] NET: Registered protocol family 15 [ 2.752985] Key type dns_resolver registered [ 2.757588] Registering SWP/SWPB emulation handler [ 2.785624] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.789783] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2.797080] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 2.802570] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.808847] 7-0048 supply vdd12 not found, using dummy regulator [ 2.815630] snow-audio sound: ASoC: CPU DAI (null) not registered [ 2.820668] snow-audio sound: snd_soc_register_card failed (-517) [ 2.827445] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.834363] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.834368] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.834372] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.834375] usb 1-1: Manufacturer: Generic [ 2.834379] usb 1-1: SerialNumber: 200901010001 [ 2.861757] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.869136] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.877447] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23
[PYBOOT] [pit 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:47]: got exception: timeout ~$off
[PYBOOT] [pit 01:49]: Done.
========================================================================
Board snow-arm-exynos_defconfig failure log: -------------------------------------------------
[ 7.412450] [<c010af64>] (die) from [<c0114ef8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 7.420349] [<c0114ef8>] (__do_kernel_fault.part.0) from [<c01108e8>] (do_bad_area+0x0/0x8c) [ 7.428769] [<c01108e8>] (do_bad_area) from [<c0110654>] (do_page_fault+0x0/0x294) [ 7.436316] [<c0110654>] (do_page_fault) from [<ee0efb9b>] (0xee0efb9b) [ 7.443132] NMI backtrace for cpu 0 [ 7.446381] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.8.0-01558-g21f54dd #1 [ 7.454712] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 7.460788] task: c0b05680 task.stack: c0b00000 [ 7.465301] PC is at cpuidle_enter_state+0x25c/0x2d0 [ 7.470249] LR is at cpuidle_enter_state+0x18c/0x2d0 [ 7.475197] pc : [<c052cb5c>] lr : [<c052ca8c>] psr: 60000113 [ 7.481446] sp : c0b01f78 ip : 05355555 fp : c0b2dcb4 [ 7.486654] r10: 00000000 r9 : 00000001 r8 : bba1bc18 [ 7.491862] r7 : 00000000 r6 : eefaeec0 r5 : 00000001 r4 : bb819d47 [ 7.498372] r3 : 00000050 r2 : 00000001 r1 : c0b2dcb4 r0 : 00000000 [ 7.504882] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.512000] Control: 10c5387d Table: 4000406a DAC: 00000051 [ 7.517729] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.8.0-01558-g21f54dd #1 [ 7.526061] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 7.532137] [<c010e0ac>] (unwind_backtrace) from [<c010ad28>] (show_stack+0x10/0x14) [ 7.539863] [<c010ad28>] (show_stack) from [<c032d620>] (dump_stack+0x78/0x8c) [ 7.547067] [<c032d620>] (dump_stack) from [<c0330f64>] (nmi_cpu_backtrace+0x5c/0x7c) [ 7.554879] [<c0330f64>] (nmi_cpu_backtrace) from [<c010d2a8>] (handle_IPI+0xd8/0x1ac) [ 7.562778] [<c010d2a8>] (handle_IPI) from [<c010150c>] (gic_handle_irq+0x94/0x98) [ 7.570329] [<c010150c>] (gic_handle_irq) from [<c010b80c>] (__irq_svc+0x6c/0xa8) [ 7.577794] Exception stack(0xc0b01f28 to 0xc0b01f70) [ 7.582829] 1f20: 00000000 c0b2dcb4 00000001 00000050 bb819d47 00000001 [ 7.590988] 1f40: eefaeec0 00000000 bba1bc18 00000001 00000000 c0b2dcb4 05355555 c0b01f78 [ 7.599147] 1f60: c052ca8c c052cb5c 60000113 ffffffff [ 7.604181] [<c010b80c>] (__irq_svc) from [<c052cb5c>] (cpuidle_enter_state+0x25c/0x2d0) [ 7.612254] [<c052cb5c>] (cpuidle_enter_state) from [<c0154384>] (cpu_startup_entry+0x19c/0x248) [ 7.621021] [<c0154384>] (cpu_startup_entry) from [<c0a00c54>] (start_kernel+0x37c/0x388) [ 7.629179] [<c0a00c54>] (start_kernel) from [<4000807c>] (0x4000807c)
[PYBOOT] [snow 02:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:17]: got exception: timeout ~$off
[PYBOOT] [snow 02:19]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: [ 22.612890] mmcblk0: error -110 sending status command, aborting Id "3" respawning too fast: disabled for 5 minutes INIT: Id "5[ 22.624311] mmcblk0: error -110 sending status command, retrying " respawning too fast: disabled f[ 22.633385] mmcblk0: error -110 sending status command, retrying or 5 minutes [ 22.642247] mmcblk0: error -110 sending status command, aborting [ 22.653198] mmcblk0: error -110 sending status command, retrying [ 22.661568] mmcblk0: error -110 sending status command, retrying [ 22.669923] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 22.681090] mmcblk0: error -110 sending status command, retrying y" [ 22.689790] mmcblk0: error -110 sending status command, retrying [ 22.698291] mmcblk0: error -110 sending status command, aborting [ 22.710842] mmcblk0: error -110 sending status command, retrying [ 22.719218] mmcblk0: error -110 sending status command, retrying [ 22.727582] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 22.780625] mmcblk0: error -110 sending status command, retrying [ 22.789013] mmcblk0: error -110 sending status command, retrying [ 22.797376] mmcblk0: error -110 sending status command, aborting [ 22.808256] mmcblk0: error -110 sending status command, retrying [ 22.816621] mmcblk0: error -110 sending status command, retrying [ 22.824951] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 87.113756] random: crng init done
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.
kernel-build-reports@lists.linaro.org