Automated DT boot report for various ARM defconfigs.
Tree/Branch: linus Git describe: v3.14-rc4-45-gd2a0476 Failed boot tests (console logs at the end) ===========================================
Full Report ===========
arm-msm_defconfig ----------------- qcom-apq8074-dragonboard PASS: 1 min 14.8 sec
arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 0.5 sec omap4-panda PASS: 1 min 10.4 sec omap3-overo-tobi PASS: 0 min 23.1 sec 3730xm DEAD: 0 min 0.0 sec am335x-bone PASS: 0 min 27.2 sec omap3-overo-storm-tobi PASS: 0 min 25.1 sec omap5-uevm PASS: 1 min 0.9 sec omap4-panda-es PASS: 1 min 9.6 sec
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 17.0 sec
arm-multi_v7_defconfig ---------------------- ste-snowball PASS: 1 min 20.9 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 45.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 49.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 13.8 sec bcm28155-ap PASS: 0 min 58.8 sec omap3-overo-tobi PASS: 0 min 21.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.2 sec omap3-overo-storm-tobi PASS: 0 min 21.1 sec omap5-uevm PASS: 1 min 42.0 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 1 min 0.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec
arm-mvebu_defconfig ------------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.4 sec
arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 16.9 sec
arm-bcm_defconfig ----------------- bcm28155-ap PASS: 1 min 9.6 sec
arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 27.2 sec
arm-u8500_defconfig ------------------- ste-snowball PASS: 0 min 30.1 sec
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 PASS: 0 min 12.8 sec sun4i-a10-cubieboard PASS: 0 min 17.6 sec
arm-da8xx_omapl_defconfig ------------------------- da850-evm PASS: 0 min 19.4 sec
arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 17.1 sec
Console logs for failures =========================
arm-omap2plus_defconfig -----------------------
3730xm: DEAD: last 80 lines of boot log: ----------------------------------------
[ 0.715911] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.717620] CPU PMU: probing PMU on CPU 0 [ 0.717651] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.946655] VFS: Disk quotas dquot_6.5.2 [ 0.946990] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.950134] NFS: Registering the id_resolver key type [ 0.950683] Key type id_resolver registered [ 0.950714] Key type id_legacy registered [ 0.950866] jffs2: version 2.2. (NAND) (SUMMARY) B) 2001-2006 Red Hat, Inc. [ 0.951477] msgmni has been set to 985 [ 0.956451] io scheduler noop registered [ 0.956481] io scheduler deadline registered [ 0.956573] io scheduler cfq registered (default) [ 0.963623] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.973937] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.977020] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 0.979003] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 1.656280] console [ttyO2] enabled [ 1.662414] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3 [ 1.711822] brd: module loaded [ 1.740142] loop: module loaded [ 1.756591] twl 1-0048: PIH (irq 23) chaining IRQs 338..346 [ 1.763122] twl 1-0048: power (irq 343) chaining IRQs 346..353 [ 1.772735] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371 [ 1.788146] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral [ 1.800903] hsusb2_vcc: at 3300 mV [ 1.810974] vdd_mpu_iva: 600 <-->setenv usbethaddr 2a:45:34:6d:b4:5d 1450 mV normal [ 1.818450] vdd_core: 600 <--> 1450 mV normal [ 1.826232] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby [ 1.835235] VDAC: 1800 mV normal standby [ 1.841766] VDVI: 1800 mV normal standby [ 1.848907] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 1.865356] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.872955] No NAND device found [ 1.876342] nand device scan failed, may be bus-width mismatch [ 1.899383] usbcore: registered new interface driver asix [ 1.906219] usbcore: registered new interface driver ax88179_178a [ 1.91363setenv preboot "usb start" # For USB net setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' 5] usbcore: registered new interface driver cdc_ether [ 1.920257] usbcore: registered new interface driver r815x [ 1.926727] usbcore: registered new interface driver smsc95xx [ 1.934967] usbcore: registered new interface driver net1080 [ 1.941497] usbcore: registered new interface driver cdc_subset [ 1.948455] usbcore: registered new interface driver zaurus [ 1.955078] usbcore: registered new interface driver cdc_ncm [ 1.963745] usbcore: registered new interface driver cdc_wdm [ 1.970245] usbcore: registered new interface driver usb-storage [ 1.977325] usbcore: registered new interface driver usbtest [ 1.988464] mousedev: PS/2 mouse device common for all mice [ 2.000854] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-004b/twl4030_pwrbutton/input/input0 [ 2.016632] twl_rtc twl_rtc: Power up reset detected. [ 2.022155] twl_rtc twl_rtc: Enabling TWL-RTC [ 2.031951] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.039978] i2c /dev entries driver [ 2.048065] Driver for 1-wire Dallas network protocol. [ 2.059875] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 2.074005] omap-dma-engine omap-dma-engine: allocating channel for 62 [ 2.080932] omap-dma-engine omap-dma-engine: allocating channel for 61 [ 2.459869] usbcore: registered new interface driver usbhid [ 2.465850] usbhid: USB HID core driver [ 2.475860] oprofile: using arm/armv7 [ 2.480590] TCP: cubic registered [ 2.484191] Initializing XFRM netlink socket [ 2.488830] NET: Registered protocol family 17 [ 2.493621] NET: Registered protocol family 15 [ 2.498718] Key type dns_resolver registered [ 2.517517] ThumbEE CPU extension supported. [ 2.528167] VDVI: incomplete constraints, leaving on [ 2.534027] VDAC: incomplete constraints, leaving on [ 2.546844] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 2.557800] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.624237] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.635742] mmc0: new high speed SDHC card at address 1234 [ 2.645141] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.657806] mmcblk0: p1 p2 [ 14.685394] omap_uart omap_uart.2: no wakeirq for uart2 ^[^[^[
kernel-build-reports@lists.linaro.org