Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-rc5-787-g7108522/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 18:50.92 bbb arm-omap2plus_defconfig : FAILED 1:54.78 bbb arm-multi_v7_defconfig : FAILED 1:54.86 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:20.90 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.44 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.87 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.56 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:55.95 beaver arm-tegra_defconfig : FAILED 1:46.84 beaver arm-multi_v7_defconfig : FAILED 1:48.85 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:50.95 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.22 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.29 cosmic arm-multi_v7_defconfig : FAILED 2:07.53 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:16.30 dalmore arm-tegra_defconfig : FAILED 1:52.49 dalmore arm-multi_v7_defconfig : FAILED 1:56.16 dalmore arm-multi_lpae_defconfig : FAILED 2:08.11 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.20 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.45 omap5uevm arm-multi_v7_defconfig : FAILED 0:52.78 omap5uevm arm-multi_lpae_defconfig : FAILED 2:13.64 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:06.17 seaboard arm-tegra_defconfig : FAILED 1:51.55 seaboard arm-multi_v7_defconfig : FAILED 1:56.69 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:53.22 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.17 snowball arm-u8500_defconfig : FAILED 1:55.95 snowball arm-multi_v7_defconfig : FAILED 2:15.64 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:12.74 wandboard arm-imx_v6_v7_defconfig : FAILED 3:00.64

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:15.00 arndale arm-exynos_defconfig : passed 1:34.12 arndale arm-multi_v7_defconfig : passed 1:25.39 arndale arm-multi_lpae_defconfig : passed 1:28.90 capri arm-bcm_defconfig : passed 0:45.37 capri arm-multi_v7_defconfig : passed 0:55.59 capri arm-multi_v7_nosmp_defconfig : warnings 1:07.40 chitra powerpc-pasemi_defconfig : passed 2:01.05 chitra powerpc-ppc64_defconfig : passed 3:01.06 colombus arm-sunxi_defconfig : passed 2:23.47 colombus arm-multi_v7_defconfig : passed 2:50.83 colombus arm-multi_lpae_defconfig : passed 2:40.42 cubie arm-sunxi_defconfig : passed 0:57.09 cubie arm-multi_v7_defconfig : passed 0:57.89 cubie arm-multi_v7_nosmp_defconfig : passed 0:52.47 cubie2 arm-sunxi_defconfig : passed 0:49.35 cubie2 arm-multi_v7_defconfig : passed 0:59.56 cubie2 arm-multi_lpae_defconfig : passed 1:01.03 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:05.09 cubox arm-multi_v7_defconfig : passed 0:59.95 cubox arm-mvebu_v7_defconfig : passed 1:07.33 cubox arm-multi_v7_nosmp_defconfig : passed 1:12.09 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.93 hummingboard arm-multi_v7_defconfig : passed 1:49.06 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:07.55 jetsontk1 arm-tegra_defconfig : warnings 1:34.26 jetsontk1 arm-multi_v7_defconfig : warnings 1:34.14 jetsontk1 arm-multi_lpae_defconfig : warnings 1:58.30 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 2:18.58 omap5uevm arm-omap2plus_defconfig : passed 1:04.12 pandaes arm-omap2plus_defconfig : warnings 1:36.38 pandaes arm-multi_v7_defconfig : passed 1:39.30 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:48.10 pi arm-exynos_defconfig : passed 2:10.66 pi arm-multi_v7_defconfig : passed 2:22.37 pi arm-multi_lpae_defconfig : passed 2:33.88 pi arm-multi_v7_nosmp_defconfig : warnings 2:15.18 pit arm-exynos_defconfig : passed 2:07.90 pit arm-multi_v7_defconfig : passed 2:16.29 pit arm-multi_lpae_defconfig : passed 2:25.02 pit arm-multi_v7_nosmp_defconfig : warnings 2:07.45 seattle arm64-defconfig : warnings 2:16.43 snow arm-exynos_defconfig : passed 2:11.01 snow arm-multi_v7_defconfig : passed 2:09.82 snow arm-multi_lpae_defconfig : passed 2:05.72 trimslice arm-tegra_defconfig : warnings 2:41.99 trimslice arm-multi_v7_defconfig : warnings 1:53.69 wandboard arm-multi_v7_defconfig : passed 1:13.01 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:13.60

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.86 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.60 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:29.02 parallella arm-multi_v7_defconfig : OFFLINE 2:30.65 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.19 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.19 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:40.47 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:40.74 sama5 arm-sama5_defconfig : OFFLINE 2:20.62 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:21.10 socfpga arm-socfpga_defconfig : OFFLINE 2:25.94 socfpga arm-multi_v7_defconfig : OFFLINE 2:41.04 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.52 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.50

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.582357] usbcore: registered new interface driver zaurus [ 1.587934] usbcore: registered new interface driver cdc_ncm [ 1.594232] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.600850] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.607975] exynos-dwc3 usb_dwc3: no suspend clk specified [ 1.613414] usb_dwc3 supply vdd33 not found, using dummy regulator [ 1.619587] usb_dwc3 supply vdd10 not found, using dummy regulator [ 1.627632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.632694] ehci-pci: EHCI PCI platform driver [ 1.637139] ehci-platform: EHCI generic platform driver [ 1.642466] ehci-omap: OMAP-EHCI Host Controller driver [ 1.647613] ehci-orion: EHCI orion driver [ 1.651605] SPEAr-ehci: EHCI SPEAr driver [ 1.655602] ehci-st: EHCI STMicroelectronics driver [ 1.660466] ehci-exynos: EHCI EXYNOS driver [ 1.664720] ehci-atmel: EHCI Atmel driver [ 1.668609] tegra-ehci: Tegra EHCI driver [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc5-00787-g7108522 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Thu Apr 28 15:30:21 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fdc08, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ [PYBOOT] [arndale 18:45]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 18:46]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.649201] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.659207] ledtrig-cpu: registered to indicate activity on CPUs [ 1.666306] usbcore: registered new interface driver usbhid [ 1.672231] usbhid: USB HID core driver [ 1.684445] NET: Registered protocol family 10 [ 1.691005] sit: IPv6 over IPv4 tunneling driver [ 1.697162] NET: Registered protocol family 17 [ 1.701932] can: controller area network core (rev 20120528 abi 9) [ 1.708570] NET: Registered protocol family 29 [ 1.713292] can: raw protocol (rev 20120528) [ 1.717812] can: broadcast manager protocol (rev 20120528 t) [ 1.723803] can: netlink gateway (rev 20130117) max_hops=1 [ 1.730546] Key type dns_resolver registered [ 1.735449] omap_voltage_late_init: Voltage driver support not added [ 1.743792] ThumbEE CPU extension supported. [ 1.748421] Registering SWP/SWPB emulation handler [ 1.790772] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.797305] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.805077] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.813785] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821703] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.829556] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.837388] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.844745] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.853499] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.861414] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.871149] mmc1: new high speed MMC card at address 0001 [ 1.878400] hctosys: unable to open rtc device (rtc0) [ 1.891571] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.897593] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.904613] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.913483] mmcblk1: p1 p2 [ 1.919247] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.315501] sdhci: Secure Digital Host Controller Interface driver [ 1.322027] sdhci: Copyright(c) Pierre Ossman [ 1.327835] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.390928] Synopsys Designware Multimedia Card Interface Driver [ 1.398305] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.407468] ledtrig-cpu: registered to indicate activity on CPUs [ 1.414209] usbcore: registered new interface driver usbhid [ 1.420089] usbhid: USB HID core driver [ 1.429801] NET: Registered protocol family 10 [ 1.436277] sit: IPv6 over IPv4 tunneling driver [ 1.442152] NET: Registered protocol family 17 [ 1.446892] can: controller area network core (rev 20120528 abi 9) [ 1.453494] NET: Registered protocol family 29 [ 1.458190] can: raw protocol (rev 20120528) [ 1.462707] can: broadcast manager protocol (rev 20120528 t) [ 1.468685] can: netlink gateway (rev 20130117) max_hops=1 [ 1.475258] Key type dns_resolver registered [ 1.480070] omap_voltage_late_init: Voltage driver support not added [ 1.487866] ThumbEE CPU extension supported. [ 1.500489] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.508058] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.516113] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.523862] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.531551] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.539238] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.546523] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.554229] hctosys: unable to open rtc device (rtc0) [ 1.565002] Waiting for root device /dev/mmcblk0p2... [ 1.600205] mmc1: new high speed MMC card at address 0001 [ 1.606681] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.611748] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.618233] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.626674] mmcblk1: p1 p2

[PYBOOT] [bbb 02:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:18]: got exception: timeout ~$off

[PYBOOT] [bbb 02:20]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.052036] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.058153] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.064477] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.071352] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.080945] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.090442] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.097458] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.140865] ledtrig-cpu: registered to indicate activity on CPUs [ 2.149544] oprofile: using arm/armv7 [ 2.154693] Initializing XFRM netlink socket [ 2.159781] NET: Registered protocol family 10 [ 2.170694] sit: IPv6 over IPv4 tunneling driver [ 2.179468] NET: Registered protocol family 17 [ 2.184412] NET: Registered protocol family 15 [ 2.189658] Key type dns_resolver registered [ 2.194518] omap_voltage_late_init: Voltage driver support not added [ 2.201254] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.209717] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.219994] ThumbEE CPU extension supported. [ 2.224651] Registering SWP/SWPB emulation handler [ 2.229686] SmartReflex Class3 initialized [ 2.299260] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.306603] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.317181] mmc1: new high speed MMC card at address 0001 [ 2.329365] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.337700] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.345487] hctosys: unable to open rtc device (rtc0) [ 2.350949] sr_init: No PMIC hook to init smartreflex [ 2.356623] sr_init: platform driver register failed for SR [ 2.397312] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.405304] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.419649] mmcblk1: p1 p2 [ 2.437084] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.187778] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.194839] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.220967] rtc-ds1307 2-006f: SET TIME! [ 2.226708] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.233449] rtc-ds1307 2-006f: 64 bytes nvram [ 2.238055] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.246260] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.252028] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.260252] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.269403] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.276273] hub 1-0:1.0: USB hub found [ 2.280225] hub 1-0:1.0: 1 port detected [ 2.284645] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.290409] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.298497] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.307507] hub 2-0:1.0: USB hub found [ 2.311472] hub 2-0:1.0: 1 port detected [ 2.317576] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.351581] vdd_3v3: supplied by regen1 [ 2.389756] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.407710] aic_dvdd_fixed: disabling [ 2.412445] Waiting for root device /dev/mmcblk0p1... [ 2.439596] mmc1: new high speed MMC card at address 0001 [ 2.445577] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.450460] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.456793] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.463685] mmcblk1: p1 [ 2.590463] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.625523] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.650648] hub 2-1:1.0: USB hub found [ 2.654616] hub 2-1:1.0: 4 ports detected [ 2.746635] hub 1-1:1.0: USB hub found [ 2.750608] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.188431] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.195494] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.220955] rtc-ds1307 2-006f: SET TIME! [ 2.226719] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.233458] rtc-ds1307 2-006f: 64 bytes nvram [ 2.238062] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.246265] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.252043] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.260266] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.269416] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.276285] hub 1-0:1.0: USB hub found [ 2.280229] hub 1-0:1.0: 1 port detected [ 2.284632] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.290394] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.298495] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.307478] hub 2-0:1.0: USB hub found [ 2.311440] hub 2-0:1.0: 1 port detected [ 2.317507] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.351549] vdd_3v3: supplied by regen1 [ 2.388278] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.405881] aic_dvdd_fixed: disabling [ 2.410637] Waiting for root device /dev/mmcblk0p1... [ 2.432519] mmc1: new high speed MMC card at address 0001 [ 2.438494] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.443376] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.449719] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.456590] mmcblk1: p1 [ 2.590443] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.625473] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.650637] hub 2-1:1.0: USB hub found [ 2.654605] hub 2-1:1.0: 4 ports detected [ 2.746629] hub 1-1:1.0: USB hub found [ 2.750611] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.016177] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.023232] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.048528] rtc-ds1307 2-006f: SET TIME! [ 2.054141] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.060849] rtc-ds1307 2-006f: 64 bytes nvram [ 2.065430] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.072795] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.078569] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.086784] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.095923] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.102655] hub 1-0:1.0: USB hub found [ 2.106609] hub 1-0:1.0: 1 port detected [ 2.110912] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.116667] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.124749] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.133614] hub 2-0:1.0: USB hub found [ 2.137553] hub 2-0:1.0: 1 port detected [ 2.142813] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.178735] vdd_3v3: supplied by regen1 [ 2.209865] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.222800] aic_dvdd_fixed: disabling [ 2.228181] Waiting for root device /dev/mmcblk0p1... [ 2.275071] mmc1: new high speed MMC card at address 0001 [ 2.280947] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.285776] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.292071] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.298857] mmcblk1: p1 [ 2.418067] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.448086] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.476848] hub 2-1:1.0: USB hub found [ 2.480826] hub 2-1:1.0: 4 ports detected [ 2.572851] hub 1-1:1.0: USB hub found [ 2.576821] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:54]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:55]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.658118] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.664990] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.675368] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.680226] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.686525] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.693389] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.702992] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.712500] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.719561] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.767445] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.773743] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.780610] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.790201] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.799695] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.806737] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.812863] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.819172] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.826026] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.835622] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.845121] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.852164] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.858830] vdd_3v3: supplied by regen1 [ 2.897694] hctosys: unable to open rtc device (rtc0) [ 2.903008] sr_init: No PMIC hook to init smartreflex [ 2.908560] sr_init: platform driver register failed for SR [ 2.956413] aic_dvdd_fixed: disabling [ 2.960630] ldousb: disabling [ 2.963849] mmc1: new high speed MMC card at address 0001 [ 2.971881] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.977233] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.984206] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.992648] mmcblk1: p1 [ 2.999880] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.353504] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.359090] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.366192] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.376193] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.385652] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.391169] vdd_1v8_gen: supplied by vdd_5v_in [ 3.398195] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.404818] [drm] No driver support for vblank timestamp query. [ 3.410756] drm drm: No connectors reported connected with modes [ 3.416764] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.442592] Console: switching to colour frame buffer device 128x48 [ 3.454951] drm drm: fb0: frame buffer device [ 3.473449] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.482112] usb3_vbus: supplied by vdd_5v_in [ 3.488582] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.495041] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.500451] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.508284] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.523473] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.530329] hub 1-0:1.0: USB hub found [ 3.534102] hub 1-0:1.0: 1 port detected [ 3.539021] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.544432] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.552167] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.563453] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.570211] hub 2-0:1.0: USB hub found [ 3.573978] hub 2-0:1.0: 1 port detected [ 3.583187] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.596840] vdd_sata,avdd_plle: disabling [ 3.601651] usb1_vbus: disabling [ 3.605775] Waiting for root device /dev/mmcblk0p1... [ 3.883461] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.822022] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.297755] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.303338] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.309946] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.319938] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.329100] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.334572] vdd_1v8_gen: supplied by vdd_5v_in [ 3.340251] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.346862] [drm] No driver support for vblank timestamp query. [ 3.352791] drm drm: No connectors reported connected with modes [ 3.358792] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.378096] Console: switching to colour frame buffer device 128x48 [ 3.389861] drm drm: fb0: frame buffer device [ 3.394298] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.402190] usb3_vbus: supplied by vdd_5v_in [ 3.408428] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.414874] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.420277] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.427996] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.442840] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.449206] hub 1-0:1.0: USB hub found [ 3.452970] hub 1-0:1.0: 1 port detected [ 3.457606] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.463014] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.470671] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.482837] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.489105] hub 2-0:1.0: USB hub found [ 3.492864] hub 2-0:1.0: 1 port detected [ 3.500387] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.513464] vdd_sata,avdd_plle: disabling [ 3.517855] usb1_vbus: disabling [ 3.521787] Waiting for root device /dev/mmcblk0p1... [ 3.802841] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.741373] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:48]: got exception: timeout ~$off

[PYBOOT] [beaver 01:50]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.664001] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.674005] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.682879] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.688396] vdd_1v8_gen: supplied by vdd_5v_in [ 3.696885] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.703505] [drm] No driver support for vblank timestamp query. [ 3.709503] drm drm: No connectors reported connected with modes [ 3.715513] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.741721] Console: switching to colour frame buffer device 128x48 [ 3.753565] drm drm: fb0: frame buffer device [ 3.780490] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.787998] usb3_vbus: supplied by vdd_5v_in [ 3.794117] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.800583] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.806007] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.813990] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.830500] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.838221] hub 1-0:1.0: USB hub found [ 3.842007] hub 1-0:1.0: 1 port detected [ 3.846811] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852239] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860114] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.880495] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.888084] hub 2-0:1.0: USB hub found [ 3.891860] hub 2-0:1.0: 1 port detected [ 3.900173] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.918880] vdd_sata,avdd_plle: disabling [ 3.923300] usb1_vbus: disabling [ 3.926730] ALSA device list: [ 3.929687] #0: NVIDIA Tegra Beaver [ 3.933931] Waiting for root device /dev/mmcblk0p1... [ 4.210500] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.195901] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:45]: got exception: timeout ~$off

[PYBOOT] [beaver 01:46]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.798077] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.812475] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.414312] random: dd urandom read with 60 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.833823] eth0: device MAC address 22:2d:46:0e:ec:0f [ 89.987189] RX IPC Checksum Offload disabled [ 89.991808] No MAC Management Counters available [ 89.997583] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/22:2d:46:0e:ec:0f Sending on LPF/eth0/22:2d:46:0e:ec:0f Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.495693] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.569946] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.580285] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.654490] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.664815] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.739071] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.749396] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.823589] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.833916] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.908170] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.918507] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.992705] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.003033] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.077303] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.087634] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.161878] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.172203] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.246455] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.256780] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.331021] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.341344] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.415593] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.425916] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.500153] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.510477] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.584669] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.594997] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.669248] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.679576] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.753776] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.764104] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.838352] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.848684] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.088698] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.162680] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.172759] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.246745] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.256818] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.330800] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.340878] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.414861] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.424939] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.498930] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.509008] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.582993] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.593062] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.667052] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.677123] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.751110] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.761183] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.835174] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.845242] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.919229] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.929302] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.003285] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.013362] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.087346] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.097422] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.171403] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.181483] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.255465] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.265541] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.339530] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.349612] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.423599] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.433679] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:04]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:05]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.877912] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951829] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961886] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035801] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045858] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119773] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129832] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203745] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213806] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287720] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297781] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371693] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381752] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455671] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465734] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539650] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549702] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623613] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633666] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707577] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717631] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791537] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801586] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875494] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885552] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959468] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969525] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043438] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053499] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127416] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137471] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211383] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221445] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:13]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:14]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:15]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.686023] Key type dns_resolver registered [ 2.692463] ThumbEE CPU extension supported. [ 2.696888] Registering SWP/SWPB emulation handler [ 2.727169] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.735177] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.745542] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.759518] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.766265] [drm] No driver support for vblank timestamp query. [ 2.783637] mmc1: new high speed MMC card at address 0001 [ 2.793639] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.801832] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.811491] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.821173] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.830071] mmcblk1: p1 [ 2.943886] Console: switching to colour frame buffer device 240x75 [ 3.030531] drm drm: fb0: frame buffer device [ 3.048786] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.058913] usb2_vbus: supplied by vdd-sys-5v0 [ 3.070758] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.076350] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.085111] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.098804] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.109074] hub 1-0:1.0: USB hub found [ 3.113069] hub 1-0:1.0: 1 port detected [ 3.123659] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.137912] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.199644] dvdd_ts: disabling [ 3.202756] usb1_vbus: disabling [ 3.206153] vdd_cam_1v8_reg: disabling [ 3.214069] Waiting for root device /dev/mmcblk0p1... [ 3.428830] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.406559] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.533776] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:05]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:06]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:07]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.686369] Key type dns_resolver registered [ 2.692824] ThumbEE CPU extension supported. [ 2.697248] Registering SWP/SWPB emulation handler [ 2.723175] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.728752] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.740000] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.756316] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.763076] [drm] No driver support for vblank timestamp query. [ 2.786759] mmc1: new high speed MMC card at address 0001 [ 2.795831] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.802885] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.811819] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.820729] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.829858] mmcblk1: p1 [ 2.940317] Console: switching to colour frame buffer device 240x75 [ 3.026933] drm drm: fb0: frame buffer device [ 3.043701] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.053822] usb2_vbus: supplied by vdd-sys-5v0 [ 3.065512] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.071109] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.079911] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.093719] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.104149] hub 1-0:1.0: USB hub found [ 3.108144] hub 1-0:1.0: 1 port detected [ 3.118252] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.132222] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.194588] dvdd_ts: disabling [ 3.197689] usb1_vbus: disabling [ 3.201061] vdd_cam_1v8_reg: disabling [ 3.208593] Waiting for root device /dev/mmcblk0p1... [ 3.418722] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.396681] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.214587] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.222715] can: broadcast manager protocol (rev 20120528 t) [ 2.228470] can: netlink gateway (rev 20130117) max_hops=1 [ 2.235225] Key type dns_resolver registered [ 2.240329] ThumbEE CPU extension supported. [ 2.271471] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.276407] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.286492] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.306707] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.313385] [drm] No driver support for vblank timestamp query. [ 2.477367] Console: switching to colour frame buffer device 240x75 [ 2.565478] drm drm: fb0: frame buffer device [ 2.570235] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.578441] usb2_vbus: supplied by vdd-sys-5v0 [ 2.587451] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.593016] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.600921] mmc1: new high speed MMC card at address 0001 [ 2.607579] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.612631] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.619342] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.625430] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.631839] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.638623] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.645823] mmcblk1: p1 [ 2.650744] hub 1-0:1.0: USB hub found [ 2.657747] hub 1-0:1.0: 1 port detected [ 2.667456] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.678873] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.719380] dvdd_ts: disabling [ 2.722535] usb1_vbus: disabling [ 2.725815] vdd_cam_1v8_reg: disabling [ 2.731308] Waiting for root device /dev/mmcblk0p1... [ 2.970300] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.923581] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.859243] Bluetooth: RFCOMM ver 1.11 [ 2.863184] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.868579] Bluetooth: BNEP socket layer initialized [ 2.873664] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.879661] Bluetooth: HIDP socket layer initialized [ 2.886623] Key type dns_resolver registered [ 2.896179] Registering SWP/SWPB emulation handler [ 2.926251] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.931386] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.940299] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.963109] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.969759] [drm] No driver support for vblank timestamp query. [ 3.147026] Console: switching to colour frame buffer device 240x75 [ 3.233618] drm drm: fb0: frame buffer device [ 3.261918] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.269190] usb2_vbus: supplied by vdd-sys-5v0 [ 3.277631] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.283493] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.292632] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.311927] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.326058] hub 1-0:1.0: USB hub found [ 3.330012] hub 1-0:1.0: 1 port detected [ 3.344153] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.360306] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.455265] dvdd_ts: disabling [ 3.458368] usb1_vbus: disabling [ 3.461755] vdd_cam_1v8_reg: disabling [ 3.466593] ALSA device list: [ 3.469598] #0: NVIDIA Tegra Dalmore [ 3.475612] Waiting for root device /dev/mmcblk0p1... [ 3.651914] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.676239] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.680643] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:51]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.671896] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.702994] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.703987] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.712155] usbcore: registered new interface driver usbhid [ 1.714134] usbhid: USB HID core driver [ 1.722488] NET: Registered protocol family 10 [ 1.723123] sit: IPv6 over IPv4 tunneling driver [ 1.728137] NET: Registered protocol family 17 [ 1.731380] NET: Registered protocol family 15 [ 1.735862] Key type dns_resolver registered [ 1.740180] Registering SWP/SWPB emulation handler [ 1.750982] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.751096] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.758403] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.777326] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.781584] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.788531] max98090 1-0010: MAX98090 REVID=0x43 [ 1.790768] max98090 1-0010: use default 2.8v micbias [ 1.801182] mmc1: new DDR MMC card at address 0001 [ 1.806488] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.810502] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.811506] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.814927] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.829142] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.835045] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.841625] mmcblk1: p1 p2 [ 1.848314] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.870129] VDD10_HDMI_1.0V: disabling [ 1.870840] vdd_g3d: disabling [ 1.871908] BUCK8_2.8V: disabling [ 1.875951] ALSA device list: [ 1.877518] #0: Odroid-U3 [ 1.881309] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 3.498087] 9f40: c0390f50 00000000 ee03db40 c13382c0 c0390f50 00000000 00000000 00000000 [ 3.506640] 9f60: 00000000 c035cb18 41402709 00000000 00000001 c13382c0 00000000 00000000 [ 3.515195] 9f80: ee089f80 ee089f80 00000000 00000000 ee089f90 ee089f90 ee089fac ee03db40 [ 3.523744] 9fa0: c035ca3c 00000000 00000000 c0307eb8 00000000 00000000 00000000 00000000 [ 3.532295] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.540854] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 2089cbe5 251020b1 [ 3.549409] [<c036f058>] (set_next_entity) from [<eefd4440>] (0xeefd4440) [ 3.556508] Code: e1a03001 eafffff0 e92d4ff0 e1a05001 (e591301c) [[ 3.35.6562828881]1 ]I nIntteerrnnala le errrroorr:: O oOposps:: 3 737 [ #[#33]] SSMPMP A RARMM[ [ 3 . 5362.8586278] 87CP] U:C P0U: P 0ID :P ID7:8 7C8om Cmom[e ri c 3 .O5MA62P58 89(]F lHaatrtedwneadr eD enavmiece: GTerneeer)i c O M AP 5 4.(6Fl.0a-ttrce5ne-d00 7D8ev7i-gc7e 10T8r5e2e2) # 1[ [ 3. 562900] PC is at kthread_data+0x4/0xc sk.ti: ee62a000 [ 3.562904] LR is at wq_worker_sleeping+0x8/0xc8 [ 3.562907] pc : [<c035d0e4>] lr : [<c0358554>] psr: 20000193 [ 3.562907] sp : ee62b790 ip : 00000001 fp : ee62b7dc [ 3.562909] r10: c1302694 r9 : c120b300 r8 : ee5ab268 [ 3.562911] r7 : c120b300 r6 : ee5aaf40 r5 : eefcc300 r4 : 00000000 [ 3.562913] r3 : 00000000 r2 : 00000020 r1 : 00000000 r0 : ee5aaf40 [ 3.562915] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 3.562917] Control: 10c5387d Table: 0000406a DAC: 00000051 [ 3.562920] Process kworker/0:2 (pid: 78, stack limit = 0xee62a220) [ 3.562922] Stack: (0xee62b790 to 0xee62c000) [ 3.562925] b780: 0000af3b c0b69874 ee5aaf40 ee618900 [ 3.562929] b7a0: ee5aaf40 ee5aaf40 00000000 00000000 c0b69b2c 2ddc1000 ee62a000 ee62a000 [ 3.562933] b7c0: ee62b534 00000001 ee62b7f0 ee5ab1e0 c0b6c2f0 00000001 000000ec c0b69b2c [ 3.562938] b7e0: 0420806c ee5aaf40 ee06c000 c034465c 000000f0 ee62b7f0 00000001 c1412604 [ 3.562942] b800: c1307c4c ee62b990 60000113 0000000b c0b6c2f0 00000001 c0b6c2ee c030bf4c [ 3.562947] b820: ee62a220 0000000b c1307c4c ee62a000 00000000 00000008 65000000 38323033 [ 3.562950] b840: 20303031 64383265 34303036 34336520 33313863 33652030 30313061 28203030 [ 3.562954] b860: 38393565 30303063 c0002029 ee62b88c ee5a9594 000003e8 00000005 ee62b990 [ 3.562961] Unable to handle kernel paging request at virtual address fff799e0

[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.945121] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951477] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.967303] smsc95xx v1.0.4 [ 1.988110] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.015241] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.018961] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 36:47:6e:54:1a:53 [ 2.066265] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.074176] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.940023] Unable to handle kernel paging request at virtual address c1300000 [ 2.947585] pgd = c0204000 [ 2.950413] [c1300000] *pgd=8121140e(bad) [ 2.954614] Internal error: Oops: 8000000d [#1] SMP ARM [ 2.960082] Modules linked in: [ 2.963278] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-00787-g7108522 #1 [ 2.971116] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.977401] task: c1306a80 ti: c1300000 task.ti: c1300000 [ 2.983048] PC is at 0xc1300000 [ 2.986332] LR is at cpu_startup_entry+0x130/0x220 [ 2.991347] pc : [<c1300000>] lr : [<c03788d4>] psr: 60000093 [ 2.991347] sp : c1301fa8 ip : 2ddc1000 fp : c1300000 [ 3.003373] r10: c1410a68 r9 : c130250c r8 : c1302504 [ 3.008844] r7 : c120a600 r6 : 00000000 r5 : 00000000 r4 : c13024a4 [ 3.015685] r3 : c1301fa8 r2 : c120a600 r1 : 2ddc1000 r0 : 00000000 [ 3.022517] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 3.030080] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 3.036094] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 3.042381] Stack: (0xc1301fa8 to 0xc1302000) [ 3.046936] 1fa0: c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 3.055498] 1fc0: ffffffff ffffffff 00000000 c110068c 00000000 c11a5a30 c14125d4 c1302480 [ 3.064060] 1fe0: c11a5a2c c1307c5c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 3.072630] [<c03788d4>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 3.081189] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 3.088022] Code: 00000000 00000000 00000000 00000000 (00000000) [ 3.094408] ---[ end trace 2ca533d477f38ea5 ]--- [ 3.099238] Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [omap5uevm 00:51]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:52]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.657382] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663784] usbcore: registered new interface driver usbhid [ 1.669605] usbhid: USB HID core driver [ 1.676337] NET: Registered protocol family 10 [ 1.681562] sit: IPv6 over IPv4 tunneling driver [ 1.686736] NET: Registered protocol family 17 [ 1.691396] can: controller area network core (rev 20120528 abi 9) [ 1.697889] NET: Registered protocol family 29 [ 1.702534] can: raw protocol (rev 20120528) [ 1.707000] can: broadcast manager protocol (rev 20120528 t) [ 1.712930] can: netlink gateway (rev 20130117) max_hops=1 [ 1.718882] Key type dns_resolver registered [ 1.723426] omap_vc_init_channel: No PMIC info for vdd_core [ 1.729248] omap_vp_init: No PMIC info for vdd_core [ 1.734342] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.739979] omap_vp_init: No PMIC info for vdd_mm [ 1.744890] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.750621] omap_vp_init: No PMIC info for vdd_mpu [ 1.755899] Power Management for TI OMAP4+ devices. [ 1.761106] ThumbEE CPU extension supported. [ 1.765676] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.777163] palmas 0-0048: Irq flag is 0x00000000 [ 1.800056] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.809395] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.834283] mmc0: new high speed MMC card at address 0001 [ 1.840174] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.845031] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.851383] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.868572] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.893423] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.905488] smsc95xx v1.0.4 [ 1.928855] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 1.936780] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz

[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.842764] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.853261] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.859747] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.865169] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.873674] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.889055] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.896068] hub 3-0:1.0: USB hub found [ 1.900553] hub 3-0:1.0: 1 port detected [ 1.905608] mmc2: switch to bus width 8 failed [ 1.912635] mmc2: switch to bus width 4 failed [ 1.917146] mmc2: new high speed MMC card at address 0001 [ 1.923996] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.928839] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.930209] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.930212] [drm] No driver support for vblank timestamp query. [ 1.947716] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.954946] mmcblk2: p3 [ 1.975292] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.988876] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.991763] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.999145] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.018319] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.022743] mmc0: new SDIO card at address 0001 [ 2.056152] Console: switching to colour frame buffer device 170x48 [ 2.105806] drm drm: fb0: frame buffer device [ 2.124043] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.130866] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.160732] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.176490] vdd_1v5: disabling [ 2.179610] vdd_1v2: disabling [ 2.768644] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.780069] Waiting for root device /dev/mmcblk0p3... [ 58.694142] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:55]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.792835] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.799165] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.809060] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.815510] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.820921] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.828672] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.844109] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.850685] hub 3-0:1.0: USB hub found [ 1.854522] hub 3-0:1.0: 1 port detected [ 1.865335] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.871961] [drm] No driver support for vblank timestamp query. [ 1.878804] mmc2: switch to bus width 8 failed [ 1.883515] mmc2: switch to bus width 4 failed [ 1.887988] mmc2: new high speed MMC card at address 0001 [ 1.894171] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.907061] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.913877] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.915139] mmcblk2: p3 [ 1.930212] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.947009] Console: switching to colour frame buffer device 170x48 [ 1.981565] drm drm: fb0: frame buffer device [ 1.986045] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.992555] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.999481] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.011405] vdd_1v5: disabling [ 2.014489] vdd_1v2: disabling [ 2.019199] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.027439] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.039935] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.063803] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.072709] mmc0: new SDIO card at address 0001 [ 2.742358] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.753234] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.791938] Bluetooth: RFCOMM ver 1.11 [ 1.791978] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.792008] Bluetooth: BNEP socket layer initialized [ 1.792020] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.792047] Bluetooth: HIDP socket layer initialized [ 1.792611] Key type dns_resolver registered [ 1.793761] Registering SWP/SWPB emulation handler [ 1.821267] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.821816] VDDIO_HDMI: supplied by vdd_5v0 [ 1.822081] vdd_sys: supplied by vdd_5v0 [ 1.822190] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.822450] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.823003] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.827042] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.827073] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.827139] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.827685] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.850112] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.856174] hub 3-0:1.0: USB hub found [ 1.856235] hub 3-0:1.0: 1 port detected [ 1.871232] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.871236] [drm] No driver support for vblank timestamp query. [ 2.005862] Console: switching to colour frame buffer device 170x48 [ 2.029011] drm drm: fb0: frame buffer device [ 2.060120] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.067656] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.097779] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.119538] vdd_1v5: disabling [ 2.122641] vdd_1v2: disabling [ 2.125839] ALSA device list: [ 2.128800] #0: NVIDIA Tegra Seaboard [ 2.471014] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.482246] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:50]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.185585] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.193941] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.228859] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.964355] can: controller area network core (rev 20120528 abi 9) [ 1.970611] NET: Registered protocol family 29 [ 1.975067] can: raw protocol (rev 20120528) [ 1.979339] can: broadcast manager protocol (rev 20120528 t) [ 1.985015] can: netlink gateway (rev 20130117) max_hops=1 [ 1.991088] Key type dns_resolver registered [ 1.995574] ThumbEE CPU extension supported. [ 1.999877] Registering SWP/SWPB emulation handler [ 2.010772] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.017639] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.026885] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.033874] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.040863] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.047882] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.061767] db8500-esram12: disabling [ 2.065521] db8500-esram34: disabling [ 2.069580] V-CSI/DSI: disabling [ 2.072845] mmci-reg: disabling [ 2.076629] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.082611] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.089080] Waiting for root device /dev/mmcblk0p4... [ 2.127655] mmc3: new high speed MMC card at address 0001 [ 2.133636] mmcblk3: mmc3:0001 3.53 GiB [ 2.137908] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.143554] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.149200] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.155670] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:13]: got exception: timeout ~$off

[PYBOOT] [snowball 02:14]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.898010] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905548] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911773] usbcore: registered new interface driver usbhid [ 1.917358] usbhid: USB HID core driver [ 1.924713] NET: Registered protocol family 10 [ 1.980041] sit: IPv6 over IPv4 tunneling driver [ 1.985198] NET: Registered protocol family 17 [ 1.989685] can: controller area network core (rev 20120528 abi 9) [ 1.995910] NET: Registered protocol family 29 [ 2.000366] can: raw protocol (rev 20120528) [ 2.004638] can: broadcast manager protocol (rev 20120528 t) [ 2.010314] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016235] Key type dns_resolver registered [ 2.020690] ThumbEE CPU extension supported. [ 2.075042] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089721] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098846] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105834] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112823] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119781] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131500] db8500-esram12: disabling [ 2.179290] db8500-esram34: disabling [ 2.203033] V-CSI/DSI: disabling [ 2.214263] mmci-reg: disabling [ 2.217864] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223846] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.239013] Waiting for root device /dev/mmcblk0p4... [ 3.041870] mmc3: new high speed MMC card at address 0001 [ 3.054687] mmcblk3: mmc3:0001 3.53 GiB [ 3.058837] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.074371] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083862] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095703] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:10]: got exception: timeout ~$off

[PYBOOT] [snowball 02:12]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.742065] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.752960] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.768646] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.779510] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.813934] NET: Registered protocol family 10 [ 2.831939] sit: IPv6 over IPv4 tunneling driver [ 2.837615] NET: Registered protocol family 17 [ 2.842285] NET: Registered protocol family 35 [ 2.846801] NET: Registered protocol family 37 [ 2.851379] Registering SWP/SWPB emulation handler [ 2.857604] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.863952] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.870574] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.877716] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-09 19:37:36 UTC (955309056) [ 2.886993] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.893981] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.901000] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.907989] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.921722] db8500-esram12: disabling [ 2.925567] db8500-esram34: disabling [ 2.929504] V-CSI/DSI: disabling [ 2.932800] mmci-reg: disabling [ 2.936126] ALSA device list: [ 2.939086] #0: MOP500-card [ 2.942443] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.948364] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.954589] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:53]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.036676] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.047825] mmcblk0: error -110 sending status command, retrying [ 20.056521] mmcblk0: error -110 sending status command, retrying [ 20.064963] mmcblk0: error -110 sending status command, aborting [ 20.076078] mmcblk0: error -110 sending status command, retrying [ 20.084515] mmcblk0: error -110 sending status command, retrying [ 20.092977] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutescannot execute "/sbin/getty"

[ 20.143258] mmcblk0: error -110 sending status command, retrying INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6[ 20.154168] mmcblk0: error -110 sending status command, retrying " respawning too fast: disabled f[ 20.165395] mmcblk0: error -110 sending status command, aborting or 5 minutes [ 20.176932] mmcblk0: error -110 sending status command, retrying [ 20.185369] mmcblk0: error -110 sending status command, retrying [ 20.193841] mmcblk0: error -110 sending status command, aborting [ 20.204956] mmcblk0: error -110 sending status command, retrying [ 20.213405] mmcblk0: error -110 sending status command, retrying [ 20.221868] mmcblk0: error -110 sending status command, aborting [ 20.232973] mmcblk0: error -110 sending status command, retrying [ 20.241440] mmcblk0: error -110 sending status command, retrying [ 20.249896] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbiINIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.646063] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:59]: got exception: timeout ~$off

[PYBOOT] [wandboard 03:00]: Done.