Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-3650-ge34df33/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:53.91 bbb arm-multi_v7_defconfig : FAILED 1:59.06 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.46 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:47.26 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.74 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.65 cosmic arm-multi_v7_defconfig : FAILED 2:15.17 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.56 dalmore arm-multi_v7_defconfig : FAILED 2:01.95 dalmore arm-multi_lpae_defconfig : FAILED 2:00.39 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.81 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.39 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.01 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.25 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:59.45 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.97 snowball arm-multi_v7_defconfig : FAILED 3:13.15 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:17.37 arndale arm-exynos_defconfig : passed 1:33.29 arndale arm-multi_v7_defconfig : passed 1:25.19 arndale arm-multi_lpae_defconfig : passed 1:32.11 capri arm-bcm_defconfig : passed 0:51.56 capri arm-multi_v7_defconfig : passed 0:55.03 chitra powerpc-ppc64_defconfig : passed 2:09.39 colombus arm-sunxi_defconfig : passed 2:34.65 colombus arm-multi_v7_defconfig : passed 2:33.38 colombus arm-multi_lpae_defconfig : passed 2:37.77 cubie arm-sunxi_defconfig : passed 0:58.66 cubie arm-multi_v7_defconfig : passed 1:04.40 cubie2 arm-sunxi_defconfig : passed 0:48.67 cubie2 arm-multi_v7_defconfig : passed 1:01.29 cubie2 arm-multi_lpae_defconfig : passed 0:56.72 cubox arm-multi_v7_defconfig : passed 0:59.66 cubox arm-mvebu_v7_defconfig : passed 1:13.82 hummingboard arm-imx_v6_v7_defconfig : passed 1:36.93 hummingboard arm-multi_v7_defconfig : passed 1:24.31 jetsontk1 arm-tegra_defconfig : passed 1:36.99 jetsontk1 arm-multi_v7_defconfig : passed 1:38.36 jetsontk1 arm-multi_lpae_defconfig : passed 1:34.53 pandaes arm-omap2plus_defconfig : warnings 1:30.80 pandaes arm-multi_v7_defconfig : passed 1:49.68 pi arm-exynos_defconfig : passed 2:10.88 pi arm-multi_lpae_defconfig : passed 2:13.55 pit arm-exynos_defconfig : passed 2:14.31 pit arm-multi_v7_defconfig : passed 2:14.72 pit arm-multi_lpae_defconfig : passed 2:15.22 seattle arm64-defconfig : warnings 2:22.74 snow arm-exynos_defconfig : passed 3:15.49 snow arm-multi_v7_defconfig : passed 1:59.18 snow arm-multi_lpae_defconfig : passed 1:58.59 trimslice arm-tegra_defconfig : passed 1:31.96 wandboard arm-imx_v6_v7_defconfig : passed 1:11.05 wandboard arm-multi_v7_defconfig : passed 1:15.64

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:13.76 beaver arm-multi_v7_defconfig : OFFLINE 2:21.08 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.24 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:29.81 parallella arm-multi_v7_defconfig : OFFLINE 2:18.74 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.20 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.89 sama5 arm-sama5_defconfig : OFFLINE 2:27.03 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:14.15 seaboard arm-tegra_defconfig : OFFLINE 2:16.65 seaboard arm-multi_v7_defconfig : OFFLINE 2:17.48 socfpga arm-socfpga_defconfig : OFFLINE 2:24.91 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.25 trimslice arm-multi_v7_defconfig : OFFLINE 2:35.17

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.558342] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623528] Synopsys Designware Multimedia Card Interface Driver [ 1.631428] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641705] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648799] usbcore: registered new interface driver usbhid [ 1.654732] usbhid: USB HID core driver [ 1.666788] NET: Registered protocol family 10 [ 1.673376] sit: IPv6 over IPv4 tunneling driver [ 1.679527] NET: Registered protocol family 17 [ 1.684288] can: controller area network core (rev 20120528 abi 9) [ 1.690932] NET: Registered protocol family 29 [ 1.695654] can: raw protocol (rev 20120528) [ 1.700171] can: broadcast manager protocol (rev 20120528 t) [ 1.706172] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712896] Key type dns_resolver registered [ 1.717800] omap_voltage_late_init: Voltage driver support not added [ 1.724785] ThumbEE CPU extension supported. [ 1.729341] Registering SWP/SWPB emulation handler [ 1.773681] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780213] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787958] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796681] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804604] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812489] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820283] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827640] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834750] hctosys: unable to open rtc device (rtc0) [ 1.848283] Waiting for root device /dev/mmcblk0p2... [ 1.854038] mmc1: new high speed MMC card at address 0001 [ 1.860819] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.866095] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.872763] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.881384] mmcblk1: p1 p2

[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:57]: got exception: timeout ~$off

[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.063584] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.069713] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.076050] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.082937] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.092547] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.102060] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.109086] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.152296] ledtrig-cpu: registered to indicate activity on CPUs [ 2.161006] oprofile: using arm/armv7 [ 2.166145] Initializing XFRM netlink socket [ 2.171251] NET: Registered protocol family 10 [ 2.182058] sit: IPv6 over IPv4 tunneling driver [ 2.190877] NET: Registered protocol family 17 [ 2.195835] NET: Registered protocol family 15 [ 2.201097] Key type dns_resolver registered [ 2.205977] omap_voltage_late_init: Voltage driver support not added [ 2.212730] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.221210] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.230824] ThumbEE CPU extension supported. [ 2.235467] Registering SWP/SWPB emulation handler [ 2.240508] SmartReflex Class3 initialized [ 2.312674] mmc1: new high speed MMC card at address 0001 [ 2.324644] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.332186] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.340144] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.347458] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.359443] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.366802] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.377601] hctosys: unable to open rtc device (rtc0) [ 2.383070] sr_init: No PMIC hook to init smartreflex [ 2.388745] sr_init: platform driver register failed for SR [ 2.432232] mmcblk1: p1 p2 [ 2.450097] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.726242] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741002] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748077] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.770731] rtc-ds1307 2-006f: SET TIME! [ 1.776475] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.783232] rtc-ds1307 2-006f: 64 bytes nvram [ 1.787850] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.796048] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.801835] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.810083] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.819257] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.826140] hub 1-0:1.0: USB hub found [ 1.830099] hub 1-0:1.0: 1 port detected [ 1.834506] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.840286] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.848396] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.857414] hub 2-0:1.0: USB hub found [ 1.861387] hub 2-0:1.0: 1 port detected [ 1.867429] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.931837] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.950004] aic_dvdd_fixed: disabling [ 1.954738] Waiting for root device /dev/mmcblk0p1... [ 1.982310] mmc1: new high speed MMC card at address 0001 [ 1.988340] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993256] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999623] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006561] mmcblk1: p1 [ 2.140235] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.175265] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.200529] hub 2-1:1.0: USB hub found [ 2.204500] hub 2-1:1.0: 4 ports detected [ 2.296533] hub 1-1:1.0: USB hub found [ 2.300520] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.726365] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741071] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748151] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.770720] rtc-ds1307 2-006f: SET TIME! [ 1.776459] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.783225] rtc-ds1307 2-006f: 64 bytes nvram [ 1.787836] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.796031] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.801824] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.810078] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.819241] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.826122] hub 1-0:1.0: USB hub found [ 1.830077] hub 1-0:1.0: 1 port detected [ 1.834486] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.840270] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.848382] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.857405] hub 2-0:1.0: USB hub found [ 1.861378] hub 2-0:1.0: 1 port detected [ 1.867410] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.931819] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.949982] aic_dvdd_fixed: disabling [ 1.954712] Waiting for root device /dev/mmcblk0p1... [ 1.982291] mmc1: new high speed MMC card at address 0001 [ 1.988341] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993258] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999619] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006556] mmcblk1: p1 [ 2.140225] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.175254] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.200516] hub 2-1:1.0: USB hub found [ 2.204489] hub 2-1:1.0: 4 ports detected [ 2.296516] hub 1-1:1.0: USB hub found [ 2.300506] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.216965] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.223257] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.230148] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.240543] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.245411] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.251715] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.258574] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.268177] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.277674] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.284739] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.325313] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.331616] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.338487] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.348077] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.357573] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.364611] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.370743] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.377058] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.383899] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.393494] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.402992] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.410033] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.455365] hctosys: unable to open rtc device (rtc0) [ 2.460668] sr_init: No PMIC hook to init smartreflex [ 2.466183] sr_init: platform driver register failed for SR [ 2.506989] mmc1: new high speed MMC card at address 0001 [ 2.513006] aic_dvdd_fixed: disabling [ 2.515190] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.515913] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.516620] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.534927] ldousb: disabling [ 2.540797] mmcblk1: p1 [ 2.548918] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.458627] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.532861] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.543188] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.617407] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.627731] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.702010] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.712342] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.786566] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.796893] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.871066] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881397] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.955618] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.965950] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.040144] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.050503] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.124728] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.135049] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.209220] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.219542] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.293769] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.304086] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378308] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.388657] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.462890] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.473211] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.547439] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.557766] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.632029] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.642354] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.716584] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.726907] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.801077] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811400] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.086764] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.160747] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.170825] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.244804] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.254885] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.328863] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.338946] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.412932] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.423027] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.497018] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.507101] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.581085] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.591169] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.665155] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.675224] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.749210] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.759283] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.833269] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.843342] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.917325] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.927394] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.001370] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.011447] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.085426] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.095506] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.169485] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.179566] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.253542] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.263617] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.337608] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.347685] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.421668] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.431746] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:12]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:14]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.631104] can: netlink gateway (rev 20130117) max_hops=1 [ 2.638197] Key type dns_resolver registered [ 2.644621] ThumbEE CPU extension supported. [ 2.649044] Registering SWP/SWPB emulation handler [ 2.669769] usb1_vbus: supplied by vdd-sys-5v0 [ 2.693345] usb2_vbus: supplied by vdd-sys-5v0 [ 2.707775] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.730279] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.737137] [drm] No driver support for vblank timestamp query. [ 2.755576] mmc1: new high speed MMC card at address 0001 [ 2.764700] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.771840] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.780385] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.789003] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.800631] mmcblk1: p1 [ 2.919108] Console: switching to colour frame buffer device 240x75 [ 3.005870] drm drm: fb0: frame buffer device [ 3.022788] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.037763] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.043453] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.052231] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.067799] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.078279] hub 1-0:1.0: USB hub found [ 3.082304] hub 1-0:1.0: 1 port detected [ 3.093604] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.107783] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.170660] dvdd_ts: disabling [ 3.173879] usb1_vbus: disabling [ 3.177137] vdd_cam_1v8_reg: disabling [ 3.184891] Waiting for root device /dev/mmcblk0p1... [ 3.392803] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.349482] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 57.787717] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.632426] can: netlink gateway (rev 20130117) max_hops=1 [ 2.639536] Key type dns_resolver registered [ 2.645977] ThumbEE CPU extension supported. [ 2.650404] Registering SWP/SWPB emulation handler [ 2.679035] usb1_vbus: supplied by vdd-sys-5v0 [ 2.695835] usb2_vbus: supplied by vdd-sys-5v0 [ 2.708975] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.732816] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.739609] [drm] No driver support for vblank timestamp query. [ 2.818968] mmc1: new high speed MMC card at address 0001 [ 2.823599] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.828565] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.831481] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.834945] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.838567] mmcblk1: p1 [ 2.909055] Console: switching to colour frame buffer device 240x75 [ 3.028296] drm drm: fb0: frame buffer device [ 3.043740] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.058563] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.064231] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.072753] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.088769] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.098087] hub 1-0:1.0: USB hub found [ 3.102133] hub 1-0:1.0: 1 port detected [ 3.112900] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.127775] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.190724] dvdd_ts: disabling [ 3.193990] usb1_vbus: disabling [ 3.197255] vdd_cam_1v8_reg: disabling [ 3.204860] Waiting for root device /dev/mmcblk0p1... [ 3.413771] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.390274] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 55.211642] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.926535] Bluetooth: RFCOMM socket layer initialized [ 2.931789] Bluetooth: RFCOMM ver 1.11 [ 2.935729] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.941130] Bluetooth: BNEP socket layer initialized [ 2.946224] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.952221] Bluetooth: HIDP socket layer initialized [ 2.959153] Key type dns_resolver registered [ 2.968675] Registering SWP/SWPB emulation handler [ 2.997018] usb1_vbus: supplied by vdd-sys-5v0 [ 3.006263] usb2_vbus: supplied by vdd-sys-5v0 [ 3.021974] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.050184] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.056974] [drm] No driver support for vblank timestamp query. [ 3.234875] Console: switching to colour frame buffer device 240x75 [ 3.322263] drm drm: fb0: frame buffer device [ 3.365044] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.374330] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.380179] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.390676] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.415052] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.428555] hub 1-0:1.0: USB hub found [ 3.432531] hub 1-0:1.0: 1 port detected [ 3.446777] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.460969] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.540608] dvdd_ts: disabling [ 3.543712] usb1_vbus: disabling [ 3.547090] vdd_cam_1v8_reg: disabling [ 3.551760] ALSA device list: [ 3.554871] #0: NVIDIA Tegra Dalmore [ 3.560669] Waiting for root device /dev/mmcblk0p1... [ 3.755030] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.789631] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.217747] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.809308] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.816112] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.825741] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.857905] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.859093] usbcore: registered new interface driver usbhid [ 1.863310] usbhid: USB HID core driver [ 1.874057] NET: Registered protocol family 10 [ 1.874671] sit: IPv6 over IPv4 tunneling driver [ 1.877951] NET: Registered protocol family 17 [ 1.881914] NET: Registered protocol family 15 [ 1.886391] Key type dns_resolver registered [ 1.890709] Registering SWP/SWPB emulation handler [ 1.901533] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.901807] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.933430] max98090 1-0010: MAX98090 REVID=0x43 [ 1.935683] max98090 1-0010: use default 2.8v micbias [ 1.941607] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.947320] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.958033] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.963418] mmc1: new DDR MMC card at address 0001 [ 1.968721] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.973287] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.979338] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.985260] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.991169] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.997640] mmcblk1: p1 p2 [ 2.023455] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.041409] VDD10_HDMI_1.0V: disabling [ 2.042103] vdd_g3d: disabling [ 2.043187] BUCK8_2.8V: disabling [ 2.04n152] ALSA device list: [ 2.048830] #0: Odroid-U3 [ 2.052511] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.934793] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.941139] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.949791] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.960016] smps9: Bringing 0uV into 2100000-2100000uV [ 1.968168] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.974688] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.982711] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.993819] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.001970] ldo9: bypassed regulator has no supply! [ 2.007095] ldo9: failed to get the current voltage(-517) [ 2.012763] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.015140] smsc95xx v1.0.4 [ 2.030944] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.054818] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.061198] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.063647] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 8e:69:1d:45:ea:1d [ 2.102728] smps9: Bringing 0uV into 2100000-2100000uV [ 2.121451] ldo9: bypassed regulator has no supply! [ 2.126570] ldo9: failed to get the current voltage(-517) [ 2.132232] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.146245] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.153099] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:32:22 UTC (946690342) [ 2.168843] pbias_mmc_omap5: disabling [ 2.172792] vmmcsdio_fixed: disabling [ 2.177349] Waiting for root device /dev/mmcblk1p2... [ 2.294055] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429933] hub 1-2:1.0: USB hub found [ 2.433953] hub 1-2:1.0: 3 ports detected [ 2.462787] smps9: Bringing 0uV into 2100000-2100000uV [ 2.481538] ldo9: bypassed regulator has no supply! [ 2.486660] ldo9: failed to get the current voltage(-517) [ 2.492331] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.506342] omap-dwc3 4a020000.omap_dwc3: vbus init failed

[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.968123] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.974649] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.982681] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.993828] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.001992] ldo9: bypassed regulator has no supply! [ 2.007113] ldo9: failed to get the current voltage(-517) [ 2.012787] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.026898] smsc95xx v1.0.4 [ 2.030994] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.054802] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.061191] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.078513] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fa:90:0f:a1:e4:05 [ 2.097443] smps9: Bringing 0uV into 2100000-2100000uV [ 2.116208] ldo9: bypassed regulator has no supply! [ 2.121325] ldo9: failed to get the current voltage(-517) [ 2.126994] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.141001] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.172662] smps9: Bringing 0uV into 2100000-2100000uV [ 2.191414] ldo9: bypassed regulator has no supply! [ 2.196535] ldo9: failed to get the current voltage(-517) [ 2.202205] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.216626] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:29:54 UTC (946690194) [ 2.232366] pbias_mmc_omap5: disabling [ 2.236316] vmmcsdio_fixed: disabling [ 2.240891] Waiting for root device /dev/mmcblk1p2... [ 2.319050] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.454941] hub 1-2:1.0: USB hub found [ 2.458958] hub 1-2:1.0: 3 ports detected [ 2.464798] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.492765] smps9: Bringing 0uV into 2100000-2100000uV [ 2.511513] ldo9: bypassed regulator has no supply! [ 2.516631] ldo9: failed to get the current voltage(-517) [ 2.522295] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.375180] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.375185] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.375191] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.375195] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.375201] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.494867] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.501161] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.508027] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.517609] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.527105] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.534139] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.554782] smps9: Bringing 0uV into 2100000-2100000uV [ 2.583360] ldo9: bypassed regulator has no supply! [ 2.588485] ldo9: failed to get the current voltage(-517) [ 2.594158] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.613944] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.620238] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.627101] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.636688] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.646181] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.653212] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.659339] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.665639] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.672480] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.682066] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.691557] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.698594] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.744857] hctosys: unable to open rtc device (rtc0) [ 2.750158] sr_init: No PMIC hook to init smartreflex [ 2.755672] sr_init: platform driver register failed for SR [ 2.784007] pbias_mmc_omap5: disabling [ 2.787951] vmmcsdio_fixed: disabling [ 2.794149] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:03]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.522520] isl29018 7-0044: No cache defaults, reading back from HW [ 1.528867] isl29018 7-0044: Failed to read 1: -6 [ 1.533451] isl29018 7-0044: regmap initialization fails: -6 [ 1.543679] NET: Registered protocol family 10 [ 1.548123] sit: IPv6 over IPv4 tunneling driver [ 1.551707] NET: Registered protocol family 17 [ 1.555711] can: controller area network core (rev 20120528 abi 9) [ 1.561897] NET: Registered protocol family 29 [ 1.566289] can: raw protocol (rev 20120528) [ 1.570538] can: broadcast manager protocol (rev 20120528 t) [ 1.576180] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581900] Key type dns_resolver registered [ 1.586231] ThumbEE CPU extension supported. [ 1.590129] Registering SWP/SWPB emulation handler [ 1.599919] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605404] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611761] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617137] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627210] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637411] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642854] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653037] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659220] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664599] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674319] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696568] Waiting for root device /dev/mmcblk0p1... [ 1.700413] mmc0: tuning execution failed: -5 [ 1.704475] mmc0: error -5 whilst initialising MMC card [ 2.572292] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586268] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591726] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598098] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603482] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:57]: got exception: timeout ~$off

[PYBOOT] [pi 01:58]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.952331] ledtrig-cpu: registered to indicate activity on CPUs [ 1.959838] usbcore: registered new interface driver usbhid [ 1.965484] usbhid: USB HID core driver [ 1.989562] NET: Registered protocol family 10 [ 1.996765] sit: IPv6 over IPv4 tunneling driver [ 2.003662] NET: Registered protocol family 17 [ 2.008239] can: controller area network core (rev 20120528 abi 9) [ 2.014678] NET: Registered protocol family 29 [ 2.019226] can: raw protocol (rev 20120528) [ 2.023529] can: broadcast manager protocol (rev 20120528 t) [ 2.029296] can: netlink gateway (rev 20130117) max_hops=1 [ 2.036315] Key type dns_resolver registered [ 2.041351] ThumbEE CPU extension supported. [ 2.045745] Registering SWP/SWPB emulation handler [ 2.060150] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.067779] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.077972] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.085113] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.092285] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.099365] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.123168] db8500-esram12: disabling [ 2.129211] db8500-esram34: disabling [ 2.133666] V-CSI/DSI: disabling [ 2.137054] mmci-reg: disabling [ 2.141601] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.147705] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.154998] Waiting for root device /dev/mmcblk0p4... [ 2.198516] mmc3: new high speed MMC card at address 0001 [ 2.205535] mmcblk3: mmc3:0001 3.53 GiB [ 2.210235] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.216278] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.222442] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.230285] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 03:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:10]: got exception: timeout ~$off

[PYBOOT] [snowball 03:11]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.607818] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.617767] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.628509] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.652435] NET: Registered protocol family 10 [ 2.657836] sit: IPv6 over IPv4 tunneling driver [ 2.663452] NET: Registered protocol family 17 [ 2.667938] NET: Registered protocol family 35 [ 2.672485] NET: Registered protocol family 37 [ 2.677032] Registering SWP/SWPB emulation handler [ 2.683410] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.689575] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.696289] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.703277] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-29 16:04:05 UTC (957024245) [ 2.712493] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.719482] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.726501] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.733520] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.747100] db8500-esram12: disabling [ 2.750885] db8500-esram34: disabling [ 2.754791] V-CSI/DSI: disabling [ 2.758056] mmci-reg: disabling [ 2.761383] ALSA device list: [ 2.764343] #0: MOP500-card [ 2.767700] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.773681] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.779846] Waiting for root device /dev/mmcblk0p4... [ 65.840728] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:55]: got exception: timeout ~$off

[PYBOOT] [snowball 01:56]: Done.