Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc5-354-g4f30292/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:45.43 beaver arm-multi_v7_defconfig : FAILED 1:49.32 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:46.89 omap5uevm arm-multi_v7_defconfig : FAILED 2:04.14 omap5uevm arm-multi_lpae_defconfig : FAILED 0:53.10 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:52.75 pi arm-multi_lpae_defconfig : FAILED 2:00.59 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:52.30 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 3:00.19 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:25.68 arndale arm-exynos_defconfig : passed 1:32.76 arndale arm-multi_v7_defconfig : passed 1:24.49 arndale arm-multi_lpae_defconfig : passed 1:39.90 bbb arm-omap2plus_defconfig : passed 1:44.43 bbb arm-multi_v7_defconfig : passed 1:22.89 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:54.39 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:49.35 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:53.28 capri arm-bcm_defconfig : passed 0:49.05 capri arm-multi_v7_defconfig : passed 1:00.37 chitra powerpc-pasemi_defconfig : passed 2:09.36 chitra powerpc-ppc64_defconfig : passed 2:00.19 colombus arm-sunxi_defconfig : passed 2:24.18 colombus arm-multi_v7_defconfig : passed 2:38.24 colombus arm-multi_lpae_defconfig : passed 2:27.55 cosmic arm-imx_v6_v7_defconfig : passed 3:30.17 cosmic arm-multi_v7_defconfig : passed 3:12.33 cubie arm-sunxi_defconfig : passed 0:50.51 cubie arm-multi_v7_defconfig : passed 1:08.54 cubie2 arm-sunxi_defconfig : passed 0:49.21 cubie2 arm-multi_v7_defconfig : passed 1:02.34 cubie2 arm-multi_lpae_defconfig : passed 1:00.50 cubox arm-multi_v7_defconfig : passed 1:24.16 cubox arm-mvebu_v7_defconfig : passed 1:21.76 dalmore arm-tegra_defconfig : passed 1:27.64 dalmore arm-multi_v7_defconfig : passed 1:28.05 dalmore arm-multi_lpae_defconfig : passed 1:32.55 jetsontk1 arm-tegra_defconfig : passed 0:52.34 jetsontk1 arm-multi_v7_defconfig : passed 0:47.52 jetsontk1 arm-multi_lpae_defconfig : passed 1:01.69 omap5uevm arm-omap2plus_defconfig : passed 1:10.67 pandaes arm-omap2plus_defconfig : warnings 1:43.92 pandaes arm-multi_v7_defconfig : passed 1:50.22 parallella arm-multi_v7_defconfig : passed 2:37.54 pi arm-exynos_defconfig : passed 2:12.96 pit arm-multi_v7_defconfig : passed 2:22.08 pit arm-multi_lpae_defconfig : passed 2:22.22 seaboard arm-tegra_defconfig : passed 0:59.86 seaboard arm-multi_v7_defconfig : passed 1:05.23 seattle arm64-defconfig : passed 2:19.62 snow arm-exynos_defconfig : passed 2:07.61 snow arm-multi_v7_defconfig : passed 2:12.33 snow arm-multi_lpae_defconfig : passed 2:01.08 snowball arm-u8500_defconfig : passed 1:29.44 snowball arm-multi_v7_defconfig : passed 1:27.36 trimslice arm-tegra_defconfig : passed 1:40.92 trimslice arm-multi_v7_defconfig : passed 1:41.07 wandboard arm-multi_v7_defconfig : passed 1:21.52
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:19.18 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:25.47 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:23.40 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.46 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:01.13 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:39.18 sama5 arm-sama5_defconfig : OFFLINE 2:22.71 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:27.73 socfpga arm-socfpga_defconfig : OFFLINE 2:24.47 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.45
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.228100] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.235057] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.241576] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.248523] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.254107] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.261112] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.271109] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.282617] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.289235] [drm] No driver support for vblank timestamp query. [ 3.295170] drm drm: No connectors reported connected with modes [ 3.301176] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.326313] Console: switching to colour frame buffer device 128x48 [ 3.338464] drm drm: fb0: frame buffer device [ 3.353383] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.364226] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.370692] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.376101] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.383942] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.398395] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.405149] hub 1-0:1.0: USB hub found [ 3.408922] hub 1-0:1.0: 1 port detected [ 3.413863] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.419274] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.427016] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.438387] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.445050] hub 2-0:1.0: USB hub found [ 3.448819] hub 2-0:1.0: 1 port detected [ 3.457652] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.471354] vdd_sata,avdd_plle: disabling [ 3.476071] usb1_vbus: disabling [ 3.480158] Waiting for root device /dev/mmcblk0p1... [ 3.758394] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.696991] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.184197] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.191243] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.196844] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.204345] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.214345] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.227573] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.234192] [drm] No driver support for vblank timestamp query. [ 6.240193] drm drm: No connectors reported connected with modes [ 6.246205] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.273144] Console: switching to colour frame buffer device 128x48 [ 6.284948] drm drm: fb0: frame buffer device [ 6.311074] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.320358] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.326836] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.332267] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.340238] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.361079] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.368970] hub 1-0:1.0: USB hub found [ 6.372751] hub 1-0:1.0: 1 port detected [ 6.377557] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.382981] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.390865] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.411073] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.418844] hub 2-0:1.0: USB hub found [ 6.422619] hub 2-0:1.0: 1 port detected [ 6.432236] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.450286] vdd_sata,avdd_plle: disabling [ 6.455008] usb1_vbus: disabling [ 6.458420] ALSA device list: [ 6.461426] #0: NVIDIA Tegra Beaver [ 6.465635] Waiting for root device /dev/mmcblk0p1... [ 6.741080] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.741289] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:43]: got exception: timeout ~$off
[PYBOOT] [beaver 01:44]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.791222] NET: Registered protocol family 10 [ 1.796883] sit: IPv6 over IPv4 tunneling driver [ 1.797357] NET: Registered protocol family 17 [ 1.800292] NET: Registered protocol family 15 [ 1.804786] Key type dns_resolver registered [ 1.809102] Registering SWP/SWPB emulation handler [ 1.817060] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.821672] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.829067] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.836224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.842810] [drm] No driver support for vblank timestamp query. [ 1.848721] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.855078] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.860274] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.867442] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.876235] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.885998] mmc1: new DDR MMC card at address 0001 [ 1.890916] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.895178] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.901118] max98090 1-0010: MAX98090 REVID=0x43 [ 1.906037] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.911520] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.918048] mmcblk1: p1 p2 [ 1.919937] max98090 1-0010: use default 2.8v micbias [ 1.930986] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.934439] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.971608] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.987693] VDD10_HDMI_1.0V: disabling [ 1.988367] vdd_g3d: disabling [ 1.989440] BUCK8_2.8V: disabling [ 1.993376] ALSA device list: [ 1.995078] #0: Odroid-U3 [ 1.998685] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:45]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:46]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.245398] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.252953] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.258965] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.265248] Stack: (0xc1301eb8 to 0xc1302000) [ 2.269804] 1ea0: 77359400 c1302510 [ 2.278365] 1ec0: 00000000 c0ef4bc0 00000000 ee1860c0 ee186120 00000000 00000001 ee008000 [ 2.286931] 1ee0: fa213000 c140e628 c1302510 c0385d7c ee1860c0 c130a9e8 00000000 c0388fb0 [ 2.295493] 1f00: c12134dc 00000000 00000000 c03852dc c12134dc c038558c c1302870 c13405f8 [ 2.304054] 1f20: fa21200c c1301f50 fa212000 c03017a8 c0308780 a0000013 ffffffff c1301f84 [ 2.312613] 1f40: c1214580 c1302508 c140e628 c030c514 00000001 00000000 ea000013 f0880000 [ 2.321176] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e628 c1302510 [ 2.329734] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.338299] 1fa0: c1300000 c0379270 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.346859] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a6a30 c14105d4 c1302480 [ 2.355420] 1fe0: c11a6a2c c1307694 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.363986] [<c0385b84>] (__irq_wake_thread) from [<c0ef4bc0>] (__func__.17898+0x1529e4/0x24fe24) [ 2.373273] Code: e34c00ef eb0115d9 e594303c eaffff88 (e5913014) [ 2.379652] ---[ end trace d3f21749deac168e ]--- [ 2.384480] Kernel panic - not syncing: Fatal exception in interrupt [ 2.391131] CPU1: stopping [ 2.393954] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc5-00354-g4f30292 #1 [ 2.403049] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.409333] [<c031038c>] (unwind_backtrace) from [<c030b9ac>] (show_stack+0x10/0x14) [ 2.417431] [<c030b9ac>] (show_stack) from [<c0591934>] (dump_stack+0x88/0x9c) [ 2.424984] [<c0591934>] (dump_stack) from [<c030eb3c>] (han[ 2.430622] Unable to handle kernel paging request at virtual address 0000fe90 [ 2.430624] pgd = c0204000 [ 2.430626] [0000fe90] *pgd=00000000 [ 2.430629] Internal error: Oops: 5 [#2] SMP ARM [ 2.430631] Modules linked in: [ 2.430635] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc5-00354-g4f30292 #1 [ 2.430636] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.430638] task: ee0779[ 2.430642] PC is at __timer_const_udelay+0x8/0x1c [ 2.430646] LR is at wait_for_xmitr+0x5c/0xd8 [ 2.430650] pc : [<c058f814>] lr : [<c06ee900>] psr: 20000193 [ 2.430650] sp : ee09bd90 ip : 00000000 fp : 00000004 [ 2.430652] r10: 00000054 r9 : c133fe84 [PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:51]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 57.139366] omap_i2c 48070000.i2c: controller timed out [ 58.174366] omap_i2c 48070000.i2c: controller timed out [ 59.209365] omap_i2c 48070000.i2c: controller timed out [ 59.224371] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 60.249360] omap_i2c 48070000.i2c: controller timed out [ 61.284360] omap_i2c 48070000.i2c: controller timed out [ 62.319360] omap_i2c 48070000.i2c: controller timed out [ 63.354360] omap_i2c 48070000.i2c: controller timed out [ 63.369363] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 63.378577] cpufreq: __target_index: Failed to change cpu frequency: -110 [ 64.409366] omap_i2c 48070000.i2c: controller timed out [ 65.444366] omap_i2c 48070000.i2c: controller timed out [ 66.479365] omap_i2c 48070000.i2c: controller timed out [ 67.514367] omap_i2c 48070000.i2c: controller timed out [ 67.529371] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 68.554361] omap_i2c 48070000.i2c: controller timed out [ 69.589359] omap_i2c 48070000.i2c: controller timed out [ 70.624360] omap_i2c 48070000.i2c: controller timed out [ 71.659360] omap_i2c 48070000.i2c: controller timed out [ 71.674364] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 71.683566] cpufreq: __target_index: Failed to change cpu frequency: -110 [ 72.714368] omap_i2c 48070000.i2c: controller timed out [ 73.749365] omap_i2c 48070000.i2c: controller timed out [ 74.784365] omap_i2c 48070000.i2c: controller timed out [ 75.819365] omap_i2c 48070000.i2c: controller timed out [ 75.834371] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 76.859360] omap_i2c 48070000.i2c: controller timed out [ 77.894360] omap_i2c 48070000.i2c: controller timed out [ 78.929360] omap_i2c 48070000.i2c: controller timed out [ 79.964360] omap_i2c 48070000.i2c: controller timed out [ 79.979364] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 79.988569] cpufreq: __target_index: Failed to change cpu frequency: -110
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>": [ 81.019367] omap_i2c 48070000.i2c: controller timed out
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.539022] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545376] isl29018 7-0044: Failed to read 1: -6 [ 1.549961] isl29018 7-0044: regmap initialization fails: -6 [ 1.560894] NET: Registered protocol family 10 [ 1.565336] sit: IPv6 over IPv4 tunneling driver [ 1.568918] NET: Registered protocol family 17 [ 1.572920] can: controller area network core (rev 20120528 abi 9) [ 1.579111] NET: Registered protocol family 29 [ 1.583498] can: raw protocol (rev 20120528) [ 1.587747] can: broadcast manager protocol (rev 20120528 t) [ 1.593390] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599123] Key type dns_resolver registered [ 1.603441] ThumbEE CPU extension supported. [ 1.607358] Registering SWP/SWPB emulation handler [ 1.617278] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622755] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629121] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634496] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644596] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654946] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660388] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670574] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676762] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682132] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691861] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714653] Waiting for root device /dev/mmcblk0p1... [ 1.718533] mmc0: tuning execution failed: -5 [ 1.722590] mmc0: error -5 whilst initialising MMC card [ 2.583839] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598009] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603471] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609843] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615227] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:58]: got exception: timeout ~$off
[PYBOOT] [pi 02:00]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533539] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539893] isl29018 7-0044: Failed to read 1: -6 [ 1.544478] isl29018 7-0044: regmap initialization fails: -6 [ 1.555378] NET: Registered protocol family 10 [ 1.559813] sit: IPv6 over IPv4 tunneling driver [ 1.563390] NET: Registered protocol family 17 [ 1.567394] can: controller area network core (rev 20120528 abi 9) [ 1.573584] NET: Registered protocol family 29 [ 1.577972] can: raw protocol (rev 20120528) [ 1.582221] can: broadcast manager protocol (rev 20120528 t) [ 1.587863] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593587] Key type dns_resolver registered [ 1.597914] ThumbEE CPU extension supported. [ 1.601832] Registering SWP/SWPB emulation handler [ 1.611710] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617193] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623560] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628934] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.639032] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649346] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654793] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664978] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671159] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676537] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686254] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708912] Waiting for root device /dev/mmcblk0p1... [ 1.712785] mmc0: tuning execution failed: -5 [ 1.716846] mmc0: error -5 whilst initialising MMC card [ 2.583339] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597449] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602907] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609278] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614663] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 21.057764] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 21.062718] lock: 0xee740000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 21.070785] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc5-00354-g4f30292 #1 [ 21.079892] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.085976] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.093690] [<c010ad18>] (show_stack) from [<c0326b78>] (dump_stack+0x78/0x8c) [ 21.100892] [<c0326b78>] (dump_stack) from [<c01599ac>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.108698] [<c01599ac>] (do_raw_spin_lock) from [<c06d2420>] (__schedule+0x84/0x4b8) [ 21.116505] [<c06d2420>] (__schedule) from [<c06d28a0>] (schedule+0x4c/0xac) [ 21.123530] [<c06d28a0>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.130471] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.136981] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.144874] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.153286] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.160833] [<c01105fc>] (do_page_fault) from [<edb10f80>] (0xedb10f80) [ 21.167424] Sending NMI to all CPUs: [ 21.170980] NMI backtrace for cpu 0 [ 21.174451] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc5-00354-g4f30292 #1 [ 21.183559] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.189639] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.197355] [<c010ad18>] (show_stack) from [<c0326b78>] (dump_stack+0x78/0x8c) [ 21.204557] [<c0326b78>] (dump_stack) from [<c032a4d8>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.212363] [<c032a4d8>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.220083] [<c010c934>] (raise_nmi) from [<c032a458>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.229019] [<c032a458>] (nmi_trigger_all_cpu_backtrace) from [<c01599b4>] (do_raw_spin_lock+0x104/0x1d8) [ 21.238561] [<c01599b4>] (do_raw_spin_lock) from [<c06d2420>] (__schedule+0x84/0x4b8) [ 21.246369] [<c06d2420>] (__schedule) from [<c06d28a0>] (schedule+0x4c/0xac) [ 21.253396] [<c06d28a0>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.260336] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.266842] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.274736] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.283151] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.290697] [<c01105fc>] (do_page_fault) from [<edb10f80>] (0xedb10f80)
[PYBOOT] [pit 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:50]: got exception: timeout ~$off
[PYBOOT] [pit 01:51]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.047519] mmcblk0: error -110 sending status command, retrying [ 20.055967] mmcblk0: error -110 sending status command, retrying [ 20.064433] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/g[ 20.081920] mmcblk0: error -110 sending status command, retrying etty"
INIT: cannot execute [ 20.090667] mmcblk0: error -110 sending status command, retrying "/sbin/getty" INIT: cannot exe[ 20.099540] mmcblk0: error -110 sending status command, aborting cute "/sbin/getty" INIT: Id "2" respawning too fast: disabled [ 20.110997] mmcblk0: error -110 sending status command, retrying for 5 minutes INIT: Id "5" res[ 20.120078] mmcblk0: error -110 sending status command, retrying pawning too fast: disabled for 5 [ 20.128915] mmcblk0: error -110 sending status command, aborting minutesINIT: cannot execute "/sbin/getty" INIT: Id "4" res[ 20.140595] mmcblk0: error -110 sending status command, retrying pawning too fast: disabled for 5 [ 20.149469] mmcblk0: error -110 sending status command, retrying minutes INIT: cannot execute "[ 20.158344] mmcblk0: error -110 sending status command, aborting /sbin/getty" INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" [ 20.202668] mmcblk0: error -110 sending status command, retrying [ 20.211128] mmcblk0: error -110 sending status command, retrying [ 20.219590] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.396972] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:58]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:59]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter