Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-4630-g4a5219e/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.04 bbb arm-multi_v7_defconfig : FAILED 1:55.66 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.11 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.32 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.61 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.98 cosmic arm-multi_v7_defconfig : FAILED 2:08.37 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:52.39 dalmore arm-multi_v7_defconfig : FAILED 2:00.54 dalmore arm-multi_lpae_defconfig : FAILED 1:59.60 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.19 omap5uevm arm-omap2plus_defconfig : FAILED 2:03.94 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.44 omap5uevm arm-multi_lpae_defconfig : FAILED 2:09.41 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:57.13 pi arm-multi_lpae_defconfig : FAILED 1:49.42 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.66 snowball arm-multi_v7_defconfig : FAILED 2:08.02 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.34 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.57 arndale arm-exynos_defconfig : passed 1:30.12 arndale arm-multi_v7_defconfig : passed 1:15.98 arndale arm-multi_lpae_defconfig : passed 1:30.55 capri arm-bcm_defconfig : passed 0:49.97 capri arm-multi_v7_defconfig : passed 0:58.05 chitra powerpc-ppc64_defconfig : passed 2:07.71 colombus arm-sunxi_defconfig : passed 2:24.60 colombus arm-multi_v7_defconfig : passed 2:41.00 colombus arm-multi_lpae_defconfig : passed 2:28.31 cubie arm-sunxi_defconfig : passed 0:49.45 cubie arm-multi_v7_defconfig : passed 0:51.52 cubie2 arm-sunxi_defconfig : passed 0:49.58 cubie2 arm-multi_v7_defconfig : passed 0:57.35 cubie2 arm-multi_lpae_defconfig : passed 0:55.93 cubox arm-multi_v7_defconfig : passed 1:06.61 cubox arm-mvebu_v7_defconfig : passed 1:11.10 hummingboard arm-imx_v6_v7_defconfig : passed 1:37.02 hummingboard arm-multi_v7_defconfig : passed 1:18.16 jetsontk1 arm-tegra_defconfig : warnings 1:37.46 jetsontk1 arm-multi_v7_defconfig : warnings 1:42.29 jetsontk1 arm-multi_lpae_defconfig : warnings 1:34.38 pandaes arm-omap2plus_defconfig : warnings 1:34.96 pandaes arm-multi_v7_defconfig : passed 1:53.78 pi arm-exynos_defconfig : passed 2:11.60 pit arm-exynos_defconfig : passed 2:11.69 pit arm-multi_v7_defconfig : passed 2:15.31 pit arm-multi_lpae_defconfig : passed 2:24.51 seattle arm64-defconfig : warnings 2:18.73 snow arm-exynos_defconfig : passed 3:16.27 snow arm-multi_v7_defconfig : passed 1:59.57 snow arm-multi_lpae_defconfig : passed 1:59.44 trimslice arm-tegra_defconfig : warnings 2:36.88 trimslice arm-multi_v7_defconfig : warnings 2:17.50 wandboard arm-multi_v7_defconfig : passed 1:15.38
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.96 beaver arm-multi_v7_defconfig : OFFLINE 2:15.97 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:14.00 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:19.90 parallella arm-multi_v7_defconfig : OFFLINE 2:17.50 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.69 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:50.57 sama5 arm-sama5_defconfig : OFFLINE 2:22.89 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:11.64 seaboard arm-tegra_defconfig : OFFLINE 2:15.51 seaboard arm-multi_v7_defconfig : OFFLINE 2:15.93 socfpga arm-socfpga_defconfig : OFFLINE 2:22.93 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.27
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.577806] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.641208] Synopsys Designware Multimedia Card Interface Driver [ 1.649095] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.659237] ledtrig-cpu: registered to indicate activity on CPUs [ 1.666364] usbcore: registered new interface driver usbhid [ 1.672288] usbhid: USB HID core driver [ 1.684654] NET: Registered protocol family 10 [ 1.691256] sit: IPv6 over IPv4 tunneling driver [ 1.697434] NET: Registered protocol family 17 [ 1.702208] can: controller area network core (rev 20120528 abi 9) [ 1.708846] NET: Registered protocol family 29 [ 1.713568] can: raw protocol (rev 20120528) [ 1.718089] can: broadcast manager protocol (rev 20120528 t) [ 1.724086] can: netlink gateway (rev 20130117) max_hops=1 [ 1.730840] Key type dns_resolver registered [ 1.735769] omap_voltage_late_init: Voltage driver support not added [ 1.742774] ThumbEE CPU extension supported. [ 1.747338] Registering SWP/SWPB emulation handler [ 1.791208] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.797777] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.805538] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.814266] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.822197] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830094] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.837917] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.845275] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.852420] hctosys: unable to open rtc device (rtc0) [ 1.865923] Waiting for root device /dev/mmcblk0p2... [ 1.871685] mmc1: new high speed MMC card at address 0001 [ 1.878478] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.883765] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.890439] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.899052] mmcblk1: p1 p2
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.054556] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.060685] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.067023] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.073911] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.083519] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.093033] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.100061] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.143272] ledtrig-cpu: registered to indicate activity on CPUs [ 2.151996] oprofile: using arm/armv7 [ 2.157141] Initializing XFRM netlink socket [ 2.162247] NET: Registered protocol family 10 [ 2.173085] sit: IPv6 over IPv4 tunneling driver [ 2.181898] NET: Registered protocol family 17 [ 2.186856] NET: Registered protocol family 15 [ 2.192113] Key type dns_resolver registered [ 2.197002] omap_voltage_late_init: Voltage driver support not added [ 2.203754] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.212234] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.221861] ThumbEE CPU extension supported. [ 2.226501] Registering SWP/SWPB emulation handler [ 2.231541] SmartReflex Class3 initialized [ 2.304420] mmc1: new high speed MMC card at address 0001 [ 2.316419] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.323949] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.331924] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.339222] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.351240] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.358633] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.369456] hctosys: unable to open rtc device (rtc0) [ 2.374932] sr_init: No PMIC hook to init smartreflex [ 2.380636] sr_init: platform driver register failed for SR [ 2.424280] mmcblk1: p1 p2 [ 2.442182] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.172155] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.186934] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.194011] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.220941] rtc-ds1307 2-006f: SET TIME! [ 2.226703] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.233468] rtc-ds1307 2-006f: 64 bytes nvram [ 2.238084] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.246334] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.252117] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.260359] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.269522] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.276399] hub 1-0:1.0: USB hub found [ 2.280348] hub 1-0:1.0: 1 port detected [ 2.284756] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.290530] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.298646] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.307656] hub 2-0:1.0: USB hub found [ 2.311629] hub 2-0:1.0: 1 port detected [ 2.317737] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.381962] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.399579] aic_dvdd_fixed: disabling [ 2.404307] Waiting for root device /dev/mmcblk0p1... [ 2.427523] mmc1: new high speed MMC card at address 0001 [ 2.433558] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.438464] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.444824] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.451732] mmcblk1: p1 [ 2.590434] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.625466] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.650772] hub 2-1:1.0: USB hub found [ 2.654739] hub 2-1:1.0: 4 ports detected [ 2.746775] hub 1-1:1.0: USB hub found [ 2.750760] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.172194] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.187033] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.194110] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.220941] rtc-ds1307 2-006f: SET TIME! [ 2.226741] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.233507] rtc-ds1307 2-006f: 64 bytes nvram [ 2.238120] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.246373] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.252161] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.260427] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.269595] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.276473] hub 1-0:1.0: USB hub found [ 2.280456] hub 1-0:1.0: 1 port detected [ 2.284833] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.290614] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.298734] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.307760] hub 2-0:1.0: USB hub found [ 2.311729] hub 2-0:1.0: 1 port detected [ 2.317838] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.381970] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.399587] aic_dvdd_fixed: disabling [ 2.404326] Waiting for root device /dev/mmcblk0p1... [ 2.427507] mmc1: new high speed MMC card at address 0001 [ 2.433546] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.438460] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.444825] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.451738] mmcblk1: p1 [ 2.590436] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.625468] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.650863] hub 2-1:1.0: USB hub found [ 2.654832] hub 2-1:1.0: 4 ports detected [ 2.746863] hub 1-1:1.0: USB hub found [ 2.750852] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.684189] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.690506] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.697385] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.707785] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.712643] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.718941] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.725815] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.735423] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.744924] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.751978] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.800394] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.806692] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.813568] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.823167] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.832671] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.839709] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.845832] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.852147] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.858993] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.868586] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.878097] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.885144] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.930482] hctosys: unable to open rtc device (rtc0) [ 2.935789] sr_init: No PMIC hook to init smartreflex [ 2.941317] sr_init: platform driver register failed for SR [ 2.982062] mmc1: new high speed MMC card at address 0001 [ 2.988318] aic_dvdd_fixed: disabling [ 2.990202] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.991020] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.991750] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.009942] ldousb: disabling [ 3.011077] mmcblk1: p1 [ 3.020712] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.468991] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.543245] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.553574] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.627813] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.638138] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.712415] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.722739] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.796966] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.807292] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.881471] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.891796] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.966023] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.976349] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.050511] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.060836] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.135069] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.145387] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.219567] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.229889] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.304132] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.314451] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.388690] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.399043] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.473281] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.483601] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.557842] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.568165] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.642400] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.652726] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.726963] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.737289] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.811470] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.821791] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.093406] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.167386] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.177465] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.251445] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.261526] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.335511] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.345594] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.419580] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.429663] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.503649] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.513732] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.587773] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.597837] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.671824] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.681906] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.755903] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.765977] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.839961] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.850036] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.924017] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.934087] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.008072] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.018148] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.092128] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.102208] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.176185] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.186259] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.260247] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.270327] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.344309] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.354388] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.428372] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.438455] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.831000] can: netlink gateway (rev 20130117) max_hops=1 [ 2.838148] Key type dns_resolver registered [ 2.844620] ThumbEE CPU extension supported. [ 2.849036] Registering SWP/SWPB emulation handler [ 2.870325] usb1_vbus: supplied by vdd-sys-5v0 [ 2.889414] usb2_vbus: supplied by vdd-sys-5v0 [ 2.907459] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.929827] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.936710] [drm] No driver support for vblank timestamp query. [ 2.968521] mmc1: new high speed MMC card at address 0001 [ 2.977696] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.986107] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.995259] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.003659] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.015016] mmcblk1: p1 [ 3.118802] Console: switching to colour frame buffer device 240x75 [ 3.205562] drm drm: fb0: frame buffer device [ 3.227215] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.242297] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.247885] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.256680] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.272256] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.282682] hub 1-0:1.0: USB hub found [ 3.286709] hub 1-0:1.0: 1 port detected [ 3.297848] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.312044] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.374103] dvdd_ts: disabling [ 3.377324] usb1_vbus: disabling [ 3.380582] vdd_cam_1v8_reg: disabling [ 3.388030] Waiting for root device /dev/mmcblk0p1... [ 3.597256] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.550541] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.712217] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.843355] can: netlink gateway (rev 20130117) max_hops=1 [ 2.850518] Key type dns_resolver registered [ 2.856998] ThumbEE CPU extension supported. [ 2.861414] Registering SWP/SWPB emulation handler [ 2.885319] usb1_vbus: supplied by vdd-sys-5v0 [ 2.906617] usb2_vbus: supplied by vdd-sys-5v0 [ 2.923400] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.946308] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.953095] [drm] No driver support for vblank timestamp query. [ 2.966897] mmc1: new high speed MMC card at address 0001 [ 2.975945] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.982926] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.991720] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.001197] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.011010] mmcblk1: p1 [ 3.130554] Console: switching to colour frame buffer device 240x75 [ 3.217507] drm drm: fb0: frame buffer device [ 3.239523] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.254692] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.260277] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.269004] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.284560] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.294829] hub 1-0:1.0: USB hub found [ 3.298848] hub 1-0:1.0: 1 port detected [ 3.309850] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.322625] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.376384] dvdd_ts: disabling [ 3.379599] usb1_vbus: disabling [ 3.382899] vdd_cam_1v8_reg: disabling [ 3.390317] Waiting for root device /dev/mmcblk0p1... [ 3.609561] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.587104] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.494524] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.089112] Bluetooth: RFCOMM socket layer initialized [ 3.094328] Bluetooth: RFCOMM ver 1.11 [ 3.098513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.103909] Bluetooth: BNEP socket layer initialized [ 3.109019] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.115020] Bluetooth: HIDP socket layer initialized [ 3.121750] Key type dns_resolver registered [ 3.131294] Registering SWP/SWPB emulation handler [ 3.156967] usb1_vbus: supplied by vdd-sys-5v0 [ 3.167157] usb2_vbus: supplied by vdd-sys-5v0 [ 3.185193] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.216429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.223206] [drm] No driver support for vblank timestamp query. [ 3.401093] Console: switching to colour frame buffer device 240x75 [ 3.488250] drm drm: fb0: frame buffer device [ 3.518047] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.527327] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.533164] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.542478] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.568056] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.582337] hub 1-0:1.0: USB hub found [ 3.586353] hub 1-0:1.0: 1 port detected [ 3.600225] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.615286] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.703884] dvdd_ts: disabling [ 3.706989] usb1_vbus: disabling [ 3.710378] vdd_cam_1v8_reg: disabling [ 3.715028] ALSA device list: [ 3.718090] #0: NVIDIA Tegra Dalmore [ 3.723850] Waiting for root device /dev/mmcblk0p1... [ 3.908043] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.942373] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.576381] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.821220] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo [ 1.830849] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.863022] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.864022] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.869111] usbcore: registered new interface driver usbhid [ 1.875169] usbhid: USB HID core driver [ 1.884513] NET: Registered protocol family 10 [ 1.885136] sit: IPv6 over IPv4 tunneling driver [ 1.888387] NET: Registered protocol family 17 [ 1.892374] NET: Registered protocol family 15 [ 1.896841] Key type dns_resolver registered [ 1.902994] Registering SWP/SWPB emulation handler [ 1.906956] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.911562] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.943556] max98090 1-0010: MAX98090 REVID=0x43 [ 1.945812] max98090 1-0010: use default 2.8v micbias [ 1.948468] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.957451] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.967318] mmc1: new DDR MMC card at address 0001 [ 1.976699] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.979870] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.982922] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.988644] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.989433] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.001244] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.007733] mmcblk1: p1 p2 [ 2.039305] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.057479] VDD10_HDMI_1.0V: disabling [ 2.058179] vdd_g3d: disabling [ 2.059250] BUCK8_2.8V: disabling [ 2.06g225] ALSA device list: [ 2.064867] #0: Odroid-U3 [ 2.068594] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.907773] palmas 0-0048: Irq flag is 0x00000000 [ 1.927159] smsc95xx v1.0.4 [ 1.933183] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.943949] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.959461] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.969779] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978252] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984806] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993023] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000307] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 2a:88:a8:25:30:5c [ 2.015925] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.024157] ldo9: bypassed regulator has no supply! [ 2.029283] ldo9: failed to get the current voltage(-517) [ 2.034947] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.050127] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.075021] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.081401] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.108015] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126855] ldo9: bypassed regulator has no supply! [ 2.131976] ldo9: failed to get the current voltage(-517) [ 2.137638] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.152110] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 04:02:01 UTC (946699321) [ 2.167744] pbias_mmc_omap5: disabling [ 2.171693] vmmcsdio_fixed: disabling [ 2.176271] Waiting for root device /dev/mmcblk1p2... [ 2.244254] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.380114] hub 1-2:1.0: USB hub found [ 2.384127] hub 1-2:1.0: 3 ports detected [ 2.389999] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.418077] smps9: Bringing 0uV into 2100000-2100000uV [ 2.436899] ldo9: bypassed regulator has no supply! [ 2.442025] ldo9: failed to get the current voltage(-517) [ 2.447687] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.980511] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.987026] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.994960] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.006105] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.014332] smsc95xx v1.0.4 [ 2.017655] ldo9: bypassed regulator has no supply! [ 2.022774] ldo9: failed to get the current voltage(-517) [ 2.028432] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.043708] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.069980] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076381] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.103402] smps9: Bringing 0uV into 2100000-2100000uV [ 2.108996] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 92:64:10:64:eb:06 [ 2.134109] ldo9: bypassed regulator has no supply! [ 2.139235] ldo9: failed to get the current voltage(-517) [ 2.144899] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.158945] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.187993] smps9: Bringing 0uV into 2100000-2100000uV [ 2.206749] ldo9: bypassed regulator has no supply! [ 2.211877] ldo9: failed to get the current voltage(-517) [ 2.217539] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.232038] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 03:59:39 UTC (946699179) [ 2.247665] pbias_mmc_omap5: disabling [ 2.251611] vmmcsdio_fixed: disabling [ 2.256160] Waiting for root device /dev/mmcblk1p2... [ 2.369229] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.505127] hub 1-2:1.0: USB hub found [ 2.509141] hub 1-2:1.0: 3 ports detected [ 2.515075] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.543028] smps9: Bringing 0uV into 2100000-2100000uV [ 2.561813] ldo9: bypassed regulator has no supply! [ 2.566931] ldo9: failed to get the current voltage(-517) [ 2.572598] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:07]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.381894] ldo9: bypassed regulator has no supply! [ 2.387028] ldo9: failed to get the current voltage(-517) [ 2.392700] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.415475] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.422938] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.429517] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.435829] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.442669] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.452257] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.461744] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.468802] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.474917] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.481219] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.488068] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.497650] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.507136] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.514161] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.555795] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.562089] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.568952] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.578533] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.588026] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.595069] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.615737] smps9: Bringing 0uV into 2100000-2100000uV [ 2.644390] ldo9: bypassed regulator has no supply! [ 2.649523] ldo9: failed to get the current voltage(-517) [ 2.655198] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.675333] hctosys: unable to open rtc device (rtc0) [ 2.680636] sr_init: No PMIC hook to init smartreflex [ 2.686148] sr_init: platform driver register failed for SR [ 2.714858] pbias_mmc_omap5: disabling [ 2.718816] vmmcsdio_fixed: disabling [ 2.724923] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.523871] isl29018 7-0044: No cache defaults, reading back from HW [ 1.530221] isl29018 7-0044: Failed to read 1: -6 [ 1.534804] isl29018 7-0044: regmap initialization fails: -6 [ 1.545216] NET: Registered protocol family 10 [ 1.549669] sit: IPv6 over IPv4 tunneling driver [ 1.553258] NET: Registered protocol family 17 [ 1.557256] can: controller area network core (rev 20120528 abi 9) [ 1.563443] NET: Registered protocol family 29 [ 1.567834] can: raw protocol (rev 20120528) [ 1.572083] can: broadcast manager protocol (rev 20120528 t) [ 1.577725] can: netlink gateway (rev 20130117) max_hops=1 [ 1.583449] Key type dns_resolver registered [ 1.587783] ThumbEE CPU extension supported. [ 1.591673] Registering SWP/SWPB emulation handler [ 1.601605] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.607098] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.613453] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.618827] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.628929] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.639215] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.644658] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.654842] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.661025] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.666402] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.676119] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.698223] Waiting for root device /dev/mmcblk0p1... [ 1.702100] mmc0: tuning execution failed: -5 [ 1.706131] mmc0: error -5 whilst initialising MMC card [ 2.573844] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.587948] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.593409] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.599780] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.605164] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:46]: got exception: timeout ~$off
[PYBOOT] [pi 01:47]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.523838] isl29018 7-0044: No cache defaults, reading back from HW [ 1.530188] isl29018 7-0044: Failed to read 1: -6 [ 1.534771] isl29018 7-0044: regmap initialization fails: -6 [ 1.545173] NET: Registered protocol family 10 [ 1.549620] sit: IPv6 over IPv4 tunneling driver [ 1.553205] NET: Registered protocol family 17 [ 1.557205] can: controller area network core (rev 20120528 abi 9) [ 1.563392] NET: Registered protocol family 29 [ 1.567784] can: raw protocol (rev 20120528) [ 1.572032] can: broadcast manager protocol (rev 20120528 t) [ 1.577674] can: netlink gateway (rev 20130117) max_hops=1 [ 1.583399] Key type dns_resolver registered [ 1.587728] ThumbEE CPU extension supported. [ 1.591622] Registering SWP/SWPB emulation handler [ 1.601568] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.607055] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.613411] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.618786] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.628883] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.639173] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.644616] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.654798] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.660983] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.666361] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.676075] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.698179] Waiting for root device /dev/mmcblk0p1... [ 1.702059] mmc0: tuning execution failed: -5 [ 1.706089] mmc0: error -5 whilst initialising MMC card [ 2.573776] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.587880] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.593338] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.599712] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.605097] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:55]: got exception: timeout ~$off
[PYBOOT] [pi 01:56]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.911041] ledtrig-cpu: registered to indicate activity on CPUs [ 1.917480] usbcore: registered new interface driver usbhid [ 1.923065] usbhid: USB HID core driver [ 1.931823] NET: Registered protocol family 10 [ 1.937225] sit: IPv6 over IPv4 tunneling driver [ 1.942474] NET: Registered protocol family 17 [ 1.946960] can: controller area network core (rev 20120528 abi 9) [ 1.953216] NET: Registered protocol family 29 [ 1.957672] can: raw protocol (rev 20120528) [ 1.961944] can: broadcast manager protocol (rev 20120528 t) [ 1.967620] can: netlink gateway (rev 20130117) max_hops=1 [ 1.973632] Key type dns_resolver registered [ 1.978088] ThumbEE CPU extension supported. [ 1.982391] Registering SWP/SWPB emulation handler [ 1.989746] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.996520] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.005706] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.012695] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.019714] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.026672] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.040100] db8500-esram12: disabling [ 2.043914] db8500-esram34: disabling [ 2.050933] V-CSI/DSI: disabling [ 2.054229] mmci-reg: disabling [ 2.057891] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.063873] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.070220] Waiting for root device /dev/mmcblk0p4... [ 2.112884] mmc3: new high speed MMC card at address 0001 [ 2.118835] mmcblk3: mmc3:0001 3.53 GiB [ 2.123046] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.128601] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.134216] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.140655] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:06]: got exception: timeout ~$off
[PYBOOT] [snowball 02:07]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.704925] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.714813] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.725524] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.748687] NET: Registered protocol family 10 [ 2.764373] sit: IPv6 over IPv4 tunneling driver [ 2.770355] NET: Registered protocol family 17 [ 2.774871] NET: Registered protocol family 35 [ 2.779449] NET: Registered protocol family 37 [ 2.784118] Registering SWP/SWPB emulation handler [ 2.800720] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.806976] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.813934] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.826324] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-29 18:33:48 UTC (957033228) [ 2.835754] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.842773] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.849761] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.856811] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.870483] db8500-esram12: disabling [ 2.874237] db8500-esram34: disabling [ 2.878173] V-CSI/DSI: disabling [ 2.881469] mmci-reg: disabling [ 2.884765] ALSA device list: [ 2.887725] #0: MOP500-card [ 2.891082] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.897003] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.903228] Waiting for root device /dev/mmcblk0p4... [ 65.880218] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 19.878199] mmcblk0: error -110 sending status command, retrying [ 19.886667] mmcblk0: error -110 sending status command, aborting [ 19.897726] mmcblk0: error -110 sending status command, retrying [ 19.906156] mmcblk0: error -110 sending status command, retrying [ 19.914588] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"
INIT: cannot execute "/sbin/g[ 19.930854] mmcblk0: error -110 sending status command, retrying etty" INIT: Id "6" respawning [ 19.939986] mmcblk0: error -110 sending status command, retrying too fast: disabled for 5 minutes[ 19.948847] mmcblk0: error -110 sending status command, aborting
INIT: Id "3" respawning too fast: disabled for 5 minutes [ 19.960406] mmcblk0: error -110 sending status command, retrying [ 19.969162] mmcblk0: error -110 sending status command, retrying [ 19.977628] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute "/sbin[ 19.993878] mmcblk0: error -110 sending status command, retrying /getty" INIT: Id "5" respawnin[ 20.002720] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 20.011584] mmcblk0: error -110 sending status command, aborting s INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" [ 20.053324] mmcblk0: error -110 sending status command, retrying [ 20.061786] mmcblk0: error -110 sending status command, retrying [ 20.070255] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.247108] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter