Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-39-gb507146/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.03 bbb arm-multi_v7_defconfig : FAILED 1:55.42 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:52.83 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:52.47 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:48.83 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.07 cosmic arm-multi_v7_defconfig : FAILED 2:10.38 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.72 dalmore arm-multi_v7_defconfig : FAILED 2:01.54 dalmore arm-multi_lpae_defconfig : FAILED 2:02.79 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.12 omap5uevm arm-multi_v7_defconfig : FAILED 2:07.68 omap5uevm arm-multi_lpae_defconfig : FAILED 2:06.60 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.67 seaboard arm-multi_v7_defconfig : FAILED 2:04.00 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:58.95 snowball arm-multi_v7_defconfig : FAILED 2:06.82 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:17.85 arndale arm-exynos_defconfig : passed 1:31.20 arndale arm-multi_v7_defconfig : passed 1:29.36 arndale arm-multi_lpae_defconfig : passed 1:24.75 capri arm-bcm_defconfig : passed 0:47.43 capri arm-multi_v7_defconfig : passed 0:54.03 chitra powerpc-ppc64_defconfig : passed 2:09.00 colombus arm-sunxi_defconfig : passed 2:20.39 colombus arm-multi_v7_defconfig : passed 2:40.69 colombus arm-multi_lpae_defconfig : passed 2:28.74 cubie arm-sunxi_defconfig : passed 0:56.58 cubie arm-multi_v7_defconfig : passed 0:56.97 cubie2 arm-sunxi_defconfig : passed 0:48.60 cubie2 arm-multi_v7_defconfig : passed 1:05.72 cubie2 arm-multi_lpae_defconfig : passed 0:52.52 cubox arm-multi_v7_defconfig : passed 1:11.48 cubox arm-mvebu_v7_defconfig : passed 1:13.23 hummingboard arm-imx_v6_v7_defconfig : passed 1:25.00 hummingboard arm-multi_v7_defconfig : passed 1:24.48 jetsontk1 arm-tegra_defconfig : passed 1:38.68 jetsontk1 arm-multi_v7_defconfig : passed 1:38.17 jetsontk1 arm-multi_lpae_defconfig : passed 1:36.52 omap5uevm arm-omap2plus_defconfig : passed 1:04.87 pandaes arm-omap2plus_defconfig : warnings 1:40.82 pandaes arm-multi_v7_defconfig : passed 1:45.86 pi arm-exynos_defconfig : passed 2:09.39 pi arm-multi_v7_defconfig : passed 2:37.32 pi arm-multi_lpae_defconfig : passed 2:13.81 pit arm-exynos_defconfig : passed 2:12.39 pit arm-multi_v7_defconfig : passed 2:15.95 pit arm-multi_lpae_defconfig : passed 2:17.15 seattle arm64-defconfig : warnings 2:32.16 snow arm-exynos_defconfig : passed 2:11.52 snow arm-multi_v7_defconfig : passed 1:54.20 snow arm-multi_lpae_defconfig : passed 1:58.78 trimslice arm-tegra_defconfig : passed 1:33.04 trimslice arm-multi_v7_defconfig : passed 1:41.05 wandboard arm-imx_v6_v7_defconfig : passed 1:14.79 wandboard arm-multi_v7_defconfig : passed 1:03.24
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.75 beaver arm-multi_v7_defconfig : OFFLINE 2:17.29 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.17 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:21.37 parallella arm-multi_v7_defconfig : OFFLINE 2:20.35 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.46 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:56.27 sama5 arm-sama5_defconfig : OFFLINE 2:24.39 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:15.78 socfpga arm-socfpga_defconfig : OFFLINE 2:18.62 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.44
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.630923] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641164] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648256] usbcore: registered new interface driver usbhid [ 1.654186] usbhid: USB HID core driver [ 1.666137] NET: Registered protocol family 10 [ 1.672719] sit: IPv6 over IPv4 tunneling driver [ 1.678855] NET: Registered protocol family 17 [ 1.683633] can: controller area network core (rev 20120528 abi 9) [ 1.690274] NET: Registered protocol family 29 [ 1.694996] can: raw protocol (rev 20120528) [ 1.699519] can: broadcast manager protocol (rev 20120528 t) [ 1.705513] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712288] Key type dns_resolver registered [ 1.717191] omap_voltage_late_init: Voltage driver support not added [ 1.725456] ThumbEE CPU extension supported. [ 1.730082] Registering SWP/SWPB emulation handler [ 1.772426] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778961] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786735] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795411] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803303] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811116] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818925] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826284] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834956] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842873] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852600] mmc1: new high speed MMC card at address 0001 [ 1.859828] hctosys: unable to open rtc device (rtc0) [ 1.872852] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878858] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885838] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894668] mmcblk1: p1 p2 [ 1.900390] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.043736] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.049851] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.056178] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.063052] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.072645] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.082141] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.089157] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.132568] ledtrig-cpu: registered to indicate activity on CPUs [ 2.141258] oprofile: using arm/armv7 [ 2.146352] Initializing XFRM netlink socket [ 2.151432] NET: Registered protocol family 10 [ 2.162139] sit: IPv6 over IPv4 tunneling driver [ 2.170904] NET: Registered protocol family 17 [ 2.175841] NET: Registered protocol family 15 [ 2.181068] Key type dns_resolver registered [ 2.186001] omap_voltage_late_init: Voltage driver support not added [ 2.192741] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.201205] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.211441] ThumbEE CPU extension supported. [ 2.216088] Registering SWP/SWPB emulation handler [ 2.221120] SmartReflex Class3 initialized [ 2.290247] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.297543] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.308071] mmc1: new high speed MMC card at address 0001 [ 2.320191] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.328468] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.336273] hctosys: unable to open rtc device (rtc0) [ 2.341596] sr_init: No PMIC hook to init smartreflex [ 2.347377] sr_init: platform driver register failed for SR [ 2.387019] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.395004] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.409285] mmcblk1: p1 p2 [ 2.426782] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.716897] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.723973] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750395] rtc-ds1307 2-006f: SET TIME! [ 1.756140] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762891] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767501] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775682] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781467] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789709] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798876] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805743] hub 1-0:1.0: USB hub found [ 1.809697] hub 1-0:1.0: 1 port detected [ 1.814101] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.819882] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.827984] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837005] hub 2-0:1.0: USB hub found [ 1.840976] hub 2-0:1.0: 1 port detected [ 1.846983] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.880987] vdd_3v3: supplied by regen1 [ 1.917564] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935549] aic_dvdd_fixed: disabling [ 1.940284] Waiting for root device /dev/mmcblk0p1... [ 1.971960] mmc1: new high speed MMC card at address 0001 [ 1.977930] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.982815] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989145] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996016] mmcblk1: p1 [ 2.119884] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154910] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180099] hub 2-1:1.0: USB hub found [ 2.184076] hub 2-1:1.0: 4 ports detected [ 2.276119] hub 1-1:1.0: USB hub found [ 2.280103] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717792] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724872] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750444] rtc-ds1307 2-006f: SET TIME! [ 1.756230] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762996] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767610] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775793] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781577] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789824] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798988] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805862] hub 1-0:1.0: USB hub found [ 1.809817] hub 1-0:1.0: 1 port detected [ 1.814221] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.819990] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828107] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837111] hub 2-0:1.0: USB hub found [ 1.841085] hub 2-0:1.0: 1 port detected [ 1.847085] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881062] vdd_3v3: supplied by regen1 [ 1.917667] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935260] aic_dvdd_fixed: disabling [ 1.939997] Waiting for root device /dev/mmcblk0p1... [ 1.961991] mmc1: new high speed MMC card at address 0001 [ 1.967961] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.972843] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979181] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986053] mmcblk1: p1 [ 2.119932] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154959] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180212] hub 2-1:1.0: USB hub found [ 2.184191] hub 2-1:1.0: 4 ports detected [ 2.276237] hub 1-1:1.0: USB hub found [ 2.280220] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.183600] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.190474] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.200869] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.205728] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.212022] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.218892] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.228478] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.237975] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.245038] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.293823] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.300125] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.307003] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.316592] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.326083] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.333127] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.339241] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.345542] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.352386] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.361979] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.371485] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.378521] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.385220] vdd_3v3: supplied by regen1 [ 2.423948] hctosys: unable to open rtc device (rtc0) [ 2.429245] sr_init: No PMIC hook to init smartreflex [ 2.434759] sr_init: platform driver register failed for SR [ 2.482065] aic_dvdd_fixed: disabling [ 2.486322] ldousb: disabling [ 2.493933] Waiting for root device /dev/mmcblk0p1... [ 2.545564] mmc1: new high speed MMC card at address 0001 [ 2.553364] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.558654] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.565486] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.574013] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:52]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.484688] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.558926] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.569251] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.643429] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.653748] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.727990] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.738317] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.812508] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.822834] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.897081] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.907407] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.981597] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.991926] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.066182] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.076571] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.150752] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.161069] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.235306] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.245621] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.319850] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.330167] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.404402] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.414721] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.488947] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.499266] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.573444] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.583767] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.657995] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.668312] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.742505] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.752823] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.827054] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.837376] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.082996] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156979] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.167055] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.241037] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.251115] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.325101] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335175] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409152] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419226] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493208] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503302] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577294] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587359] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661348] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671420] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745398] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755471] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829456] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839523] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913509] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923582] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997566] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007656] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081648] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091718] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165702] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175778] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249756] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259830] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333816] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343890] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417869] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427949] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:09]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.485258] Key type dns_resolver registered [ 2.491663] ThumbEE CPU extension supported. [ 2.496082] Registering SWP/SWPB emulation handler [ 2.542786] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.548236] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.556974] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.573526] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.580310] [drm] No driver support for vblank timestamp query. [ 2.593455] mmc1: new high speed MMC card at address 0001 [ 2.601940] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.608495] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616468] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.624396] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.634103] mmcblk1: p1 [ 2.759629] Console: switching to colour frame buffer device 240x75 [ 2.846559] drm drm: fb0: frame buffer device [ 2.869924] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.880107] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890826] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896471] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905344] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.919957] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930355] hub 1-0:1.0: USB hub found [ 2.934368] hub 1-0:1.0: 1 port detected [ 2.944419] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.958341] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.020233] dvdd_ts: disabling [ 3.023334] usb1_vbus: disabling [ 3.026690] vdd_cam_1v8_reg: disabling [ 3.034145] Waiting for root device /dev/mmcblk0p1... [ 3.244859] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.205033] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 60.910574] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:01]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:02]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.481065] Key type dns_resolver registered [ 2.487471] ThumbEE CPU extension supported. [ 2.491894] Registering SWP/SWPB emulation handler [ 2.517191] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.525252] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.536612] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.551876] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.558646] [drm] No driver support for vblank timestamp query. [ 2.580450] mmc1: new high speed MMC card at address 0001 [ 2.590306] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.596811] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.605002] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.612973] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.623594] mmcblk1: p1 [ 2.739109] Console: switching to colour frame buffer device 240x75 [ 2.826586] drm drm: fb0: frame buffer device [ 2.843551] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.853664] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865303] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.870899] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.879742] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893694] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.904128] hub 1-0:1.0: USB hub found [ 2.908132] hub 1-0:1.0: 1 port detected [ 2.918249] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932088] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.993477] dvdd_ts: disabling [ 2.996587] usb1_vbus: disabling [ 2.999938] vdd_cam_1v8_reg: disabling [ 3.007493] Waiting for root device /dev/mmcblk0p1... [ 3.218735] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.197362] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.233658] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.668092] Bluetooth: RFCOMM ver 1.11 [ 2.672047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.677442] Bluetooth: BNEP socket layer initialized [ 2.682537] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.688533] Bluetooth: HIDP socket layer initialized [ 2.695529] Key type dns_resolver registered [ 2.705194] Registering SWP/SWPB emulation handler [ 2.737638] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.744105] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.755009] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.779075] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.785879] [drm] No driver support for vblank timestamp query. [ 2.962450] Console: switching to colour frame buffer device 240x75 [ 3.049565] drm drm: fb0: frame buffer device [ 3.080459] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.087684] usb2_vbus: supplied by vdd-sys-5v0 [ 3.097081] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.102886] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.112009] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.130590] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.144113] hub 1-0:1.0: USB hub found [ 3.148149] hub 1-0:1.0: 1 port detected [ 3.162376] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.177295] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.265046] dvdd_ts: disabling [ 3.268151] usb1_vbus: disabling [ 3.271536] vdd_cam_1v8_reg: disabling [ 3.276204] ALSA device list: [ 3.279196] #0: NVIDIA Tegra Dalmore [ 3.285097] Waiting for root device /dev/mmcblk0p1... [ 3.470456] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.505029] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.094943] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.634956] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.642519] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.651428] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.682562] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.683765] usbcore: registered new interface driver usbhid [ 1.688982] usbhid: USB HID core driver [ 1.697784] NET: Registered protocol family 10 [ 1.698382] sit: IPv6 over IPv4 tunneling driver [ 1.701647] NET: Registered protocol family 17 [ 1.705669] NET: Registered protocol family 15 [ 1.710124] Key type dns_resolver registered [ 1.714452] Registering SWP/SWPB emulation handler [ 1.720285] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724855] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.751271] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.753081] max98090 1-0010: MAX98090 REVID=0x43 [ 1.755298] max98090 1-0010: use default 2.8v micbias [ 1.765331] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.775160] mmc1: new DDR MMC card at address 0001 [ 1.776625] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.779704] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.793010] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.797200] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.803043] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.808948] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.815493] mmcblk1: p1 p2 [ 1.825391] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.845391] VDD10_HDMI_1.0V: disabling [ 1.846078] vdd_g3d: disabling [ 1.847152] BUCK8_2.8V: disabling [ 1.851157] ALSA device list: [ 1.852801] #0: Odroid-U3 [ 1.856491] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.763107] usbhid: USB HID core driver [ 1.771591] NET: Registered protocol family 10 [ 1.776521] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.783688] sit: IPv6 over IPv4 tunneling driver [ 1.788971] NET: Registered protocol family 17 [ 1.793641] can: controller area network core (rev 20120528 abi 9) [ 1.800152] NET: Registered protocol family 29 [ 1.804816] can: raw protocol (rev 20120528) [ 1.809281] can: broadcast manager protocol (rev 20120528 t) [ 1.815210] can: netlink gateway (rev 20130117) max_hops=1 [ 1.821241] Key type dns_resolver registered [ 1.825796] omap_vc_init_channel: No PMIC info for vdd_core [ 1.831626] omap_vp_init: No PMIC info for vdd_core [ 1.836733] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.842376] omap_vp_init: No PMIC info for vdd_mm [ 1.847295] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.853037] omap_vp_init: No PMIC info for vdd_mpu [ 1.858555] Power Management for TI OMAP4+ devices. [ 1.863781] ThumbEE CPU extension supported. [ 1.868272] Registering SWP/SWPB emulation handler [ 1.875333] palmas 0-0048: Irq flag is 0x00000000 [ 1.902010] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.912506] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.924049] mmc0: new high speed MMC card at address 0001 [ 1.930118] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.935024] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.941368] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.974041] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.000104] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.010097] smsc95xx v1.0.4 [ 2.041139] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.049041] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.060445] ------------[ cut here ]------------
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.760407] usbhid: USB HID core driver [ 1.768932] NET: Registered protocol family 10 [ 1.773872] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.781019] sit: IPv6 over IPv4 tunneling driver [ 1.786286] NET: Registered protocol family 17 [ 1.790955] can: controller area network core (rev 20120528 abi 9) [ 1.797460] NET: Registered protocol family 29 [ 1.802121] can: raw protocol (rev 20120528) [ 1.806585] can: broadcast manager protocol (rev 20120528 t) [ 1.812530] can: netlink gateway (rev 20130117) max_hops=1 [ 1.818550] Key type dns_resolver registered [ 1.823106] omap_vc_init_channel: No PMIC info for vdd_core [ 1.828934] omap_vp_init: No PMIC info for vdd_core [ 1.834043] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.839690] omap_vp_init: No PMIC info for vdd_mm [ 1.844612] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.850348] omap_vp_init: No PMIC info for vdd_mpu [ 1.855878] Power Management for TI OMAP4+ devices. [ 1.861109] ThumbEE CPU extension supported. [ 1.865605] Registering SWP/SWPB emulation handler [ 1.872704] palmas 0-0048: Irq flag is 0x00000000 [ 1.899338] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.910023] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.933930] mmc0: new high speed MMC card at address 0001 [ 1.939901] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944798] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951145] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973180] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.997378] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.003392] smsc95xx v1.0.4 [ 2.038708] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.046650] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.056202] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 2.064676] pgd = c [PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:07]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657167] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667713] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674189] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679610] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688077] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699973] mmc2: switch to bus width 8 failed [ 1.704526] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711164] mmc2: switch to bus width 4 failed [ 1.715673] mmc2: new high speed MMC card at address 0001 [ 1.716016] hub 3-0:1.0: USB hub found [ 1.716068] hub 3-0:1.0: 1 port detected [ 1.729889] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.730901] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.730904] [drm] No driver support for vblank timestamp query. [ 1.750617] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.757208] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.764577] mmcblk2: p3 [ 1.786547] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.794437] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.797317] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.804687] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.817349] Console: switching to colour frame buffer device 170x48 [ 1.823844] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.828120] mmc0: new SDIO card at address 0001 [ 1.872702] drm drm: fb0: frame buffer device [ 1.888616] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.895417] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.902486] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.916614] vdd_1v5: disabling [ 1.919699] vdd_1v2: disabling [ 2.567062] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.578530] Waiting for root device /dev/mmcblk0p3... [ 58.124454] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:02]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:03]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.668237] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.673601] Bluetooth: BNEP socket layer initialized [ 1.678567] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.684522] Bluetooth: HIDP socket layer initialized [ 1.690087] Key type dns_resolver registered [ 1.695610] Registering SWP/SWPB emulation handler [ 1.711338] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.718135] VDDIO_HDMI: supplied by vdd_5v0 [ 1.722640] vdd_sys: supplied by vdd_5v0 [ 1.726665] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.731686] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.738252] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.748791] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.755325] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.760778] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.768862] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791517] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.800553] hub 3-0:1.0: USB hub found [ 1.804476] hub 3-0:1.0: 1 port detected [ 1.817489] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.824157] [drm] No driver support for vblank timestamp query. [ 1.919120] Console: switching to colour frame buffer device 170x48 [ 1.942271] drm drm: fb0: frame buffer device [ 1.971525] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.979232] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.987177] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.009755] vdd_1v5: disabling [ 2.012842] vdd_1v2: disabling [ 2.016044] ALSA device list: [ 2.019006] #0: NVIDIA Tegra Seaboard [ 2.309407] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.320525] Waiting for root device /dev/mmcblk0p3... [ 60.218534] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.947631] ledtrig-cpu: registered to indicate activity on CPUs [ 1.954467] usbcore: registered new interface driver usbhid [ 1.960083] usbhid: USB HID core driver [ 1.974304] NET: Registered protocol family 10 [ 1.980529] sit: IPv6 over IPv4 tunneling driver [ 1.986389] NET: Registered protocol family 17 [ 1.990905] can: controller area network core (rev 20120528 abi 9) [ 1.997222] NET: Registered protocol family 29 [ 2.001708] can: raw protocol (rev 20120528) [ 2.006011] can: broadcast manager protocol (rev 20120528 t) [ 2.011718] can: netlink gateway (rev 20130117) max_hops=1 [ 2.018127] Key type dns_resolver registered [ 2.022766] ThumbEE CPU extension supported. [ 2.027099] Registering SWP/SWPB emulation handler [ 2.039855] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.046997] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.056518] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.063598] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.070617] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.077636] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.094726] db8500-esram12: disabling [ 2.098541] db8500-esram34: disabling [ 2.102722] V-CSI/DSI: disabling [ 2.106109] mmci-reg: disabling [ 2.111236] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.117279] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.125946] Waiting for root device /dev/mmcblk0p4... [ 2.160766] mmc3: new high speed MMC card at address 0001 [ 2.167083] mmcblk3: mmc3:0001 3.53 GiB [ 2.171508] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.177368] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.183135] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.190032] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:04]: got exception: timeout ~$off
[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.690460] iio iio:device1: registered pressure sensor lps001wp [ 2.697143] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.703338] coresight-etb10 801a4000.etb: ETB initialized [ 2.709197] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.715759] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.731201] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.741912] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.751861] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.762573] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.786865] NET: Registered protocol family 10 [ 2.792327] sit: IPv6 over IPv4 tunneling driver [ 2.797851] NET: Registered protocol family 17 [ 2.802368] NET: Registered protocol family 35 [ 2.806884] NET: Registered protocol family 37 [ 2.811462] Registering SWP/SWPB emulation handler [ 2.828094] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.834930] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.842224] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.849639] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-20 16:43:46 UTC (956249026) [ 2.858856] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.865875] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.872894] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.879882] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.893341] db8500-esram12: disabling [ 2.897125] db8500-esram34: disabling [ 2.901092] V-CSI/DSI: disabling [ 2.904357] mmci-reg: disabling [ 2.907684] ALSA device list: [ 2.910644] #0: MOP500-card [ 2.914001] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.919982] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.926147] Waiting for root device /dev/mmcblk0p4... [ 79.200164] random: nonblocking pool is initialized
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter