I seem to be having local network issues right now which causes some of this noise.

-Olof On Jul 4, 2014 12:28 PM, "Olof's autobooter" build@lixom.net wrote:

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.16-rc3-178-g77c4cf17a/

Failed boards:

capri        bcm_defconfig                 :        FAILED

1:47.57 colombus sunxi_defconfig : FAILED 1:09.14 cubie multi_v7_defconfig : FAILED 1:58.60 snowball multi_v7_defconfig : FAILED 4:02.95

Successful boards:

arndale      exynos_defconfig              :        passed

1:25.69 arndale multi_lpae_defconfig : passed 1:28.97 bbb omap2plus_defconfig : passed 1:47.36 bbb multi_v7_defconfig : passed 1:26.92 beaver multi_v7_defconfig : passed 2:00.24 capri multi_v7_defconfig : passed 0:44.30 colombus multi_v7_defconfig : passed 1:06.56 colombus multi_lpae_defconfig : passed 1:01.94 cubox multi_v7_defconfig : passed 1:44.69 dalmore tegra_defconfig : passed 1:36.02 dalmore multi_lpae_defconfig : passed 1:22.92 hummingboard imx_v6_v7_defconfig : passed 1:22.60 hummingboard multi_v7_defconfig : passed 1:11.95 jetsontk1 tegra_defconfig : passed 2:03.17 omap5uevm omap2plus_defconfig : warnings 1:15.10 omap5uevm multi_v7_defconfig : warnings 2:54.91 omap5uevm multi_lpae_defconfig : warnings 4:51.21 panda omap2plus_defconfig : warnings 1:38.93 panda multi_v7_defconfig : warnings 1:56.79 sama5 sama5_defconfig : warnings 3:11.80 snow exynos_defconfig : passed 1:02.69 snow multi_v7_defconfig : passed 0:57.16 snow multi_lpae_defconfig : passed 1:01.00 trimslice tegra_defconfig : passed 3:25.20 wandboard imx_v6_v7_defconfig : passed 2:22.69 wandboard multi_v7_defconfig : passed 1:27.10

Offline boards:

apc          vt8500_v6_v7_defconfig        :        OFFLINE

0:47.00 arndale multi_v7_defconfig : OFFLINE 1:02.42 beaver tegra_defconfig : OFFLINE 0:40.43 cubie sunxi_defconfig : OFFLINE 0:28.68 cubie2 sunxi_defconfig : OFFLINE 0:24.75 cubie2 multi_v7_defconfig : OFFLINE 0:30.70 cubie2 multi_lpae_defconfig : OFFLINE 0:32.05 dalmore multi_v7_defconfig : OFFLINE 0:39.06 jetsontk1 multi_v7_defconfig : OFFLINE 1:44.76 jetsontk1 multi_lpae_defconfig : OFFLINE 0:38.51 seaboard tegra_defconfig : OFFLINE 0:38.88 seaboard multi_v7_defconfig : OFFLINE 0:38.63 snowball u8500_defconfig : OFFLINE 0:42.25 trimslice multi_v7_defconfig : OFFLINE 0:39.36

Board legend is available at http://arm-soc.lixom.net/boards.html

    Last entries of failed logs below:

========================================================================

    Board capri-bcm_defconfig failure log:
    -------------------------------------------------

[ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 2500 mV [ 0.500000] vbus: no parameters [ 0.500000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.510000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.520000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.530000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.540000] gpldo5: disabling [ 0.540000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.550000] gpldo2: disabling [ 0.550000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.560000] sdsr2: disabling [ 0.560000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.570000] iosr2: disabling [ 0.570000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.580000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8...

[PYBOOT] [capri 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [capri 01:45]: got exception: timeout ~$off

[PYBOOT] [capri 01:47]: Done.

========================================================================

    Board colombus-sunxi_defconfig failure log:
    -------------------------------------------------

fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x0 speed = 0x0 bulk_ep_size = 0x200 fifo_size = 0x200 Fastboot entered boot tIRQ: suspend mp/colombus-qxifdq/zImageez4VDIRQ: reset FIRQ: reset address:57, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddr (user:build) Load fastboot kernel ess: 57 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x39 speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 creating boot image... creating boot image - 2596864 bytes downloading 'boot.img'... OKAY [ 0.655s] booting... FAILED (remote: boot command not supported) finished. total time: 0.661s node: colombus status: on

[PYBOOT] [colombus 01:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 01:07]: got exception: timeout ~$off

[PYBOOT] [colombus 01:08]: Done.

========================================================================

    Board cubie-multi_v7_defconfig failure log:
    -------------------------------------------------

[ 1.269675] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.275569] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.284534] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.293607] scsi0 : ahci_platform [ 1.297298] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 21 [ 1.305919] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.311549] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.319586] ehci-platform 1c14000.usb: irq 19, io mem 0x01c14000 [ 1.325765] mmc0: new high speed SDHC card at address b368 [ 1.331626] mmcblk0: mmc0:b368 NCard 3.73 GiB [ 1.336290] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.343623] hub 1-0:1.0: USB hub found [ 1.347489] mmcblk0: p1 [ 1.350153] hub 1-0:1.0: 1 port detected [ 1.355607] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.361269] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.369252] ehci-platform 1c1c000.usb: irq 22, io mem 0x01c1c000 [ 1.382025] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.388945] hub 2-0:1.0: USB hub found [ 1.392777] hub 2-0:1.0: 1 port detected [ 1.397723] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.404399] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.412277] ohci-platform 1c14400.usb: irq 20, io mem 0x01c14400 [ 1.476824] hub 3-0:1.0: USB hub found [ 1.480657] hub 3-0:1.0: 1 port detected [ 1.485591] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.492291] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.500142] ohci-platform 1c1c400.usb: irq 23, io mem 0x01c1c400 [ 1.561763] hub 4-0:1.0: USB hub found [ 1.565583] hub 4-0:1.0: 1 port detected [ 1.570219] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:26 UTC (1262304026) [ 1.652040] ata1: SATA link down (SStatus 0 SControl 300) [ 3.777039] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full

• flow control off

[ 3.797030] Sending DHCP requests ...... [PYBOOT] [cubie 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie 01:56]: got exception: timeout ~$off

[PYBOOT] [cubie 01:58]: Done.

========================================================================

    Board snowball-multi_v7_defconfig failure log:
    -------------------------------------------------

Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 172.16.1.1 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 No DHCPOFFERS received. Trying recorded lease 172.16.1.124 PING 172.16.1.1 (172.16.1.1) 56(84) bytes of data.

--- 172.16.1.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.702/0.702/0.702/0.000 ms bound: renewal in 457774579 seconds. [?25l [?1c 7 [1G[ [32m ok [39;49m 8 [?25h [?0cdone. [....] Cleaning up temporary files... [?25l [?1c 7 [1G[ [32m ok [39;49m 8 [?25h [?0c. INIT: Entering runlevel: 2 [ [36minfo [39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd [PYBOOT] [snowball 04:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 04:01]: got exception: timeout ~$off

[PYBOOT] [snowball 04:02]: Done.