Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.16-rc1-76-gf5ee1b1/

Failed boards:

colombus sunxi_defconfig : FAILED 3:24.96 omap5uevm omap2plus_defconfig : FAILED 2:06.10 omap5uevm multi_lpae_defconfig : FAILED 2:04.82 snowball u8500_defconfig : FAILED 2:13.80 wandboard multi_v7_defconfig : FAILED 3:26.86

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:12.84 arndale exynos_defconfig : passed 1:14.70 arndale multi_v7_defconfig : passed 1:30.82 arndale multi_lpae_defconfig : passed 1:29.35 bbb omap2plus_defconfig : warnings 1:39.90 bbb multi_v7_defconfig : passed 2:26.11 beaver tegra_defconfig : passed 1:05.92 beaver multi_v7_defconfig : passed 1:04.45 capri bcm_defconfig : passed 0:39.26 capri multi_v7_defconfig : passed 0:41.07 colombus multi_v7_defconfig : passed 1:00.96 colombus multi_lpae_defconfig : passed 1:00.81 cubie sunxi_defconfig : passed 1:00.09 cubie multi_v7_defconfig : passed 1:05.31 cubie2 sunxi_defconfig : passed 0:59.97 cubie2 multi_v7_defconfig : passed 1:21.39 cubie2 multi_lpae_defconfig : passed 1:09.30 cubox multi_v7_defconfig : passed 1:01.03 dalmore tegra_defconfig : passed 1:41.43 dalmore multi_v7_defconfig : passed 1:20.30 dalmore multi_lpae_defconfig : passed 1:17.60 hummingboard imx_v6_v7_defconfig : passed 1:25.33 hummingboard multi_v7_defconfig : passed 1:13.97 jetsontk1 tegra_defconfig : passed 0:57.06 jetsontk1 multi_v7_defconfig : passed 0:59.65 jetsontk1 multi_lpae_defconfig : passed 0:56.99 panda omap2plus_defconfig : warnings 1:30.38 panda multi_v7_defconfig : warnings 1:48.32 seaboard tegra_defconfig : passed 0:59.19 seaboard multi_v7_defconfig : passed 1:03.72 snow exynos_defconfig : passed 1:01.32 snow multi_v7_defconfig : passed 0:56.47 snow multi_lpae_defconfig : passed 0:57.07 snowball multi_v7_defconfig : passed 4:28.07 trimslice tegra_defconfig : passed 1:02.99 wandboard imx_v6_v7_defconfig : passed 1:01.52

Offline boards:

omap5uevm multi_v7_defconfig : OFFLINE 2:28.08 sama5 sama5_defconfig : OFFLINE 1:55.92 trimslice multi_v7_defconfig : OFFLINE 1:05.37

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board colombus-sunxi_defconfig failure log: -------------------------------------------------

[ 1.351] lcd 3 timeout=0 [ 1.352] lcd 4 timeout=0 [ 2.574] no battery exist [ 2.846] key 0 [ 2.846] cant find rcvy value [ 2.847] cant find fstbt value [ 2.859] try to boot [ 2.860] load kernel start [ 2.900] load kernel successed [ 2.901] start address = 0x4a000000 [ 2.902] jump to [ 2.906] 0x4a000000

U-Boot 2011.09-rc1 (Apr 08 2013 - 18:41:25) Allwinner Technology

CPU: SUNXI Family Board: SUN6I DRAM: 2 GiB NAND: 3456 MiB *** Warning - bad CRC, using default environment

In: serial Out: serial Err: serial bootcmd set setargs_nand Hit any key to stop autoboot: 3  2  1  0 read boot or recovery all [ 7.130]

Starting kernel ...

node: colombus status: on

[PYBOOT] [colombus 03:22]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:23]: got exception: timeout ~$off

[PYBOOT] [colombus 03:24]: Done.

========================================================================

Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 47.103444] can: controller area network core (rev 20120528 abi 9) [ 47.109944] NET: Registered protocol family 29 [ 47.114590] can: raw protocol (rev 20120528) [ 47.119054] can: broadcast manager protocol (rev 20120528 t) [ 47.124969] can: netlink gateway (rev 20130117) max_hops=1 [ 47.130976] Key type dns_resolver registered [ 47.135513] omap_vc_init_channel: No PMIC info for vdd_core [ 47.141341] omap_vp_init: No PMIC info for vdd_core [ 47.146431] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.152074] omap_vp_init: No PMIC info for vdd_mm [ 47.156993] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.162727] omap_vp_init: No PMIC info for vdd_mpu [ 47.168008] ThumbEE CPU extension supported. [ 47.172485] Registering SWP/SWPB emulation handler [ 47.178698] palmas 0-0048: Irq flag is 0x00000000 [ 47.186436] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.194018] smps123: 600 <--> 1500 mV at 1060 mV [ 47.200152] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206599] smps6: 1200 mV [ 47.210597] smps7: 1800 mV [ 47.214738] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220478] smps9: failed to get the current voltage [ 47.225731] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237782] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.366842] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.511849] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.517936] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.525401] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.532257] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.539964] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.553394] ALSA device list: [ 47.556491] No soundcards found. [ 47.560505] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done.

========================================================================

Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------

[ 1.931361] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.931364] omap_vp_init: No PMIC info for vdd_mpu [ 1.931925] ThumbEE CPU extension supported. [ 1.931949] Registering SWP/SWPB emulation handler [ 1.931962] SmartReflex Class3 initialized [ 1.951076] palmas 0-0048: Irq flag is 0x00000000 [ 2.013377] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.021051] mmc0: new high speed MMC card at address 0001 [ 2.028054] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.033193] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.039695] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.048984] mmcblk0: unknown partition table [ 2.055996] mmcblk0boot1: unknown partition table [ 2.062926] mmcblk0boot0: unknown partition table [ 2.083526] smps123: 600 <--> 1500 mV at 1060 mV [ 2.090506] smps45: 600 <--> 1310 mV at 1030 mV [ 2.097858] smps6: 1200 mV [ 2.102558] smps7: 1800 mV [ 2.107449] smps8: 600 <--> 1310 mV at 1040 mV [ 2.113906] smps9: failed to get the current voltage [ 2.119862] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.134225] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.143065] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.150983] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.157049] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.166179] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.175576] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.182535] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.191176] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.199912] sr_init: No PMIC hook to init smartreflex [ 2.205372] sr_init: platform driver register failed for SR [ 2.233672] pbias_mmc_omap5: disabling [ 2.239188] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done.

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.674346] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686248] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693572] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705047] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712860] HS USB OTG: no transceiver configured [ 3.717590] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725433] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733337] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745269] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752593] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764068] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772583] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784484] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791809] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803283] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811096] HS USB OTG: no transceiver configured [ 3.815826] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823669] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831573] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843505] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862304] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870849] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882781] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890075] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901550] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909362] HS USB OTG: no transceiver configured [ 3.914093] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921936] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929840] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941772] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949066] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960540] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back

[PYBOOT] [snowball 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:11]: got exception: timeout ~$off

[PYBOOT] [snowball 02:13]: Done.

========================================================================

Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------

[PYBOOT] [wandboard 00:54]: kernel: finished booting, starting userspace. 0K (c0ade000 - c0b83000) [ 1.605258] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.619631] mmc2: new high speed SDHC card at address 0001 [ 1.625525] mmcblk1: mmc2:0001 00000 7.60 GiB [ 1.630938] mmcblk1: p1 p2 INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.298952] udevd[176]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[ 2.580991] imx-sdma 20ec000.sdma: firmware not found [?25l[?1c7[ ok 

U-Boot 2013.07-dirty (Aug 04 2013 - 23:26:03)

CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 1  0 mmc0 is current device SD/MMC found on device 0 ** File not found uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found zImage ** => node: wandboard status: on node: wandboard status: on

[PYBOOT] [wandboard 03:24]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 03:25]: got exception: timeout ~$off

[PYBOOT] [wandboard 03:26]: Done.