Failed boards:

beaver multi_v7_defconfig : FAILED 1:27.58 capri bcm_defconfig : FAILED 1:26.04 capri multi_v7_defconfig : FAILED 1:28.69 cubox multi_v7_defconfig : FAILED 1:34.84 dalmore multi_v7_defconfig : FAILED 1:34.55 dalmore multi_lpae_defconfig : FAILED 1:37.37 hummingboard multi_v7_defconfig : FAILED 1:33.15 jetson multi_v7_defconfig : FAILED 1:27.96 jetson multi_lpae_defconfig : FAILED 1:25.76 seaboard multi_v7_defconfig : FAILED 0:33.27 snowball u8500_defconfig : FAILED 1:46.69 wandboard multi_v7_defconfig : FAILED 1:28.60

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:18.70 arndale exynos_defconfig : passed 1:19.09 arndale multi_v7_defconfig : passed 1:30.22 arndale multi_lpae_defconfig : passed 1:24.16 bbb multi_v7_defconfig : passed 1:18.17 beaver tegra_defconfig : passed 1:07.43 cubie sunxi_defconfig : passed 1:38.85 cubie multi_v7_defconfig : passed 1:39.54 cubie2 sunxi_defconfig : passed 1:20.36 cubie2 multi_v7_defconfig : passed 1:30.04 cubie2 multi_lpae_defconfig : passed 1:48.39 dalmore tegra_defconfig : passed 1:43.51 hummingboard imx_v6_v7_defconfig : passed 1:19.29 jetson tegra_defconfig : passed 1:04.97 omap5uevm omap2plus_defconfig : warnings 1:03.54 omap5uevm multi_v7_defconfig : warnings 2:04.05 omap5uevm multi_lpae_defconfig : warnings 1:53.19 panda omap2plus_defconfig : warnings 1:36.95 panda multi_v7_defconfig : warnings 1:51.05 sama5 sama5_defconfig : warnings 2:00.03 snow exynos_defconfig : passed 1:24.28 snow multi_v7_defconfig : passed 1:25.40 snow multi_lpae_defconfig : passed 1:22.02 snowball multi_v7_defconfig : passed 4:10.11 trimslice tegra_defconfig : passed 1:00.72 trimslice multi_v7_defconfig : passed 1:09.98 wandboard imx_v6_v7_defconfig : passed 1:10.48

Offline boards:

bbb omap2plus_defconfig : OFFLINE 0:46.90 seaboard tegra_defconfig : OFFLINE 0:41.82

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board beaver-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.572006] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.578100] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.583062] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.589151] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.596904] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.604023] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.609619] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.616002] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.625999] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.636473] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.643103] [drm] No driver support for vblank timestamp query. [ 3.649050] host1x drm: No connectors reported connected with modes [ 3.655315] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.679741] Console: switching to colour frame buffer device 128x48 [ 3.691467] host1x drm: fb0: frame buffer device [ 3.696163] host1x drm: registered panic notifier [ 3.713617] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.719889] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.727343] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.738828] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.744234] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.752047] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.763224] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.769587] hub 1-0:1.0: USB hub found [ 3.773364] hub 1-0:1.0: 1 port detected [ 3.777737] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.783150] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.790895] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.803604] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.809912] hub 2-0:1.0: USB hub found [ 3.813681] hub 2-0:1.0: 1 port detected [ 3.821645] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.834466] usb1_vbus: disabling [ 3.837868] ALSA device list: [ 3.840868] #0: NVIDIA Tegra Beaver [ 3.845104] Waiting for root device /dev/mmcblk0p1... [ 4.123633] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592391] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout

========================================================================

Board capri-bcm_defconfig failure log: -------------------------------------------------

[ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1200 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout

========================================================================

Board capri-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout

========================================================================

Board cubox-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.226092] hub 2-0:1.0: 1 port detected [ 1.230471] SPEAr-ehci: EHCI SPEAr driver [ 1.234579] tegra-ehci: Tegra EHCI driver [ 1.238709] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244889] ohci-pci: OHCI PCI platform driver [ 1.249398] ohci-platform: OHCI generic platform driver [ 1.254719] ohci-omap3: OHCI OMAP3 driver [ 1.258817] SPEAr-ohci: OHCI SPEAr driver [ 1.263563] usbcore: registered new interface driver usb-storage [ 1.271113] mousedev: PS/2 mouse device common for all mice [ 1.278132] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287454] i2c /dev entries driver [ 1.292910] usbcore: registered new interface driver uvcvideo [ 1.298662] USB Video Class driver (1.1.1) [ 1.302763] gspca_main: v2.14.0 registered [ 1.310003] orion_wdt: Initial timeout 25 sec [ 1.315508] sdhci: Secure Digital Host Controller Interface driver [ 1.321669] sdhci: Copyright(c) Pierre Ossman [ 1.326582] Synopsys Designware Multimedia Card Interface Driver [ 1.333271] usbcore: registered new interface driver usbhid [ 1.338830] usbhid: USB HID core driver [ 1.346711] TCP: cubic registered [ 1.350019] NET: Registered protocol family 17 [ 1.354492] can: controller area network core (rev 20120528 abi 9) [ 1.360731] NET: Registered protocol family 29 [ 1.365157] can: raw protocol (rev 20120528) [ 1.369419] can: broadcast manager protocol (rev 20120528 t) [ 1.375073] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380947] Key type dns_resolver registered [ 1.385421] ThumbEE CPU extension supported. [ 1.389689] Registering SWP/SWPB emulation handler [ 1.394480] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399181] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405681] USB Power: 5000 mV [ 1.409206] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-19 18:49:34 UTC (1403203774) [ 1.419720] ALSA device list: [ 1.422695] No soundcards found. [ 1.426618] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

========================================================================

Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.975329] i2c 0-004c: Driver lm90 requests probe deferral [ 2.982822] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.988430] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.998406] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.004865] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.015228] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.020876] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.030961] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.046737] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.056297] hub 1-0:1.0: USB hub found [ 3.060313] hub 1-0:1.0: 1 port detected [ 3.066798] i2c 0-004c: Driver lm90 requests probe deferral [ 3.074353] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.079988] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.090043] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.096605] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.108710] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.117003] i2c 0-004c: Driver lm90 requests probe deferral [ 3.122705] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.161698] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.161782] VDD_5V0_HDMI_CON: disabling [ 3.161802] vdd_cam_1v8_reg: disabling [ 3.162229] vdd_hdmi_5v0: disabling [ 3.162244] usb1_vbus: disabling [ 3.162261] dvdd_ts: disabling [ 3.166562] ALSA device list: [ 3.166581] #0: NVIDIA Tegra Dalmore [ 3.191753] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.194879] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.195125] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.215798] Waiting for root device /dev/mmcblk0p1... [ 3.372028] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.855541] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.867073] i2c 0-004c: Driver lm90 requests probe deferral [ 3.874710] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.880325] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.890266] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.896745] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout

========================================================================

Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.965585] i2c 0-004c: Driver lm90 requests probe deferral [ 2.973073] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978679] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988632] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995102] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005497] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.011120] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.021123] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.037157] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.047010] hub 1-0:1.0: USB hub found [ 3.051004] hub 1-0:1.0: 1 port detected [ 3.057466] i2c 0-004c: Driver lm90 requests probe deferral [ 3.064998] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.070639] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.080681] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.087195] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.099292] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.107515] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113228] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.151334] VDD_5V0_HDMI_CON: disabling [ 3.155358] vdd_cam_1v8_reg: disabling [ 3.159614] vdd_hdmi_5v0: disabling [ 3.163285] usb1_vbus: disabling [ 3.166549] dvdd_ts: disabling [ 3.174038] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.174714] ALSA device list: [ 3.174730] #0: NVIDIA Tegra Dalmore [ 3.186424] platfodsi requests probe deferral [ 3.191265] Waiting for root device /dev/mmcblk0p1... [ 3.193763] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.194001] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.367249] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.845954] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.858010] i2c 0-004c: Driver lm90 requests probe deferral [ 3.865443] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.871037] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.880672] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.887059] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout

========================================================================

Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.031703] usbcore: registered new interface driver usb-storage [ 1.042832] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.048046] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052993] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065393] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071607] hub 1-0:1.0: USB hub found [ 1.075441] hub 1-0:1.0: 1 port detected [ 1.083129] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088234] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093160] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105400] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111555] hub 2-0:1.0: USB hub found [ 1.115358] hub 2-0:1.0: 1 port detected [ 1.120144] mousedev: PS/2 mouse device common for all mice [ 1.128389] i2c /dev entries driver [ 1.133079] usbcore: registered new interface driver uvcvideo [ 1.138859] USB Video Class driver (1.1.1) [ 1.142982] gspca_main: v2.14.0 registered [ 1.149717] sdhci: Secure Digital Host Controller Interface driver [ 1.155932] sdhci: Copyright(c) Pierre Ossman [ 1.161138] Synopsys Designware Multimedia Card Interface Driver [ 1.168085] usbcore: registered new interface driver usbhid [ 1.173687] usbhid: USB HID core driver [ 1.182383] TCP: cubic registered [ 1.185749] NET: Registered protocol family 17 [ 1.190221] can: controller area network core (rev 20120528 abi 9) [ 1.196481] NET: Registered protocol family 29 [ 1.200957] can: raw protocol (rev 20120528) [ 1.205239] can: broadcast manager protocol (rev 20120528 t) [ 1.210929] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216816] Key type dns_resolver registered [ 1.221262] ThumbEE CPU extension supported. [ 1.225579] Registering SWP/SWPB emulation handler [ 1.231550] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246718] ALSA device list: [ 1.249703] No soundcards found. [ 1.253819] Waiting for root device /dev/mmcblk0p2... [ 60.320516] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

========================================================================

Board jetson-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.253821] hub 1-0:1.0: USB hub found [ 2.257652] hub 1-0:1.0: 1 port detected [ 2.262643] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.271093] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.275645] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.283494] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.290149] [drm] No driver support for vblank timestamp query. [ 2.296138] host1x drm: No connectors reported connected with modes [ 2.302434] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.317524] Console: switching to colour frame buffer device 128x48 [ 2.331033] host1x drm: fb0: frame buffer device [ 2.335766] host1x drm: registered panic notifier [ 2.352043] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.358614] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.364052] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.371885] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.387029] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.393838] hub 2-0:1.0: USB hub found [ 2.397649] hub 2-0:1.0: 1 port detected [ 2.402758] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.410151] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.428306] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.432854] +1.8V_RUN_VPP_FUSE: disabling [ 2.437275] +2.8V_RUN_CAM_AF: disabling [ 2.441458] +3.3V_RUN_TOUCH: disabling [ 2.445578] +1.05V_RUN_CAM_REAR: disabling [ 2.449823] +VDDIO_SDMMC3: disabling [ 2.453530] +1.2V_RUN_CAM_FRONT: disabling [ 2.457754] +2.8V_RUN_CAM: disabling [ 2.461443] +1.8V_RUN_CAM: disabling [ 2.465146] +1.05V_RUN: disabling [ 2.468589] +USB0_VBUS_SW: disabling [ 2.472174] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.477044] ALSA device list: [ 2.480007] #0: NVIDIA Tegra Jetson TK1 [ 2.484634] Waiting for root device /dev/mmcblk0p1... [ 2.707016] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.169595] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout

========================================================================

Board jetson-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.248716] hub 1-0:1.0: USB hub found [ 2.252526] hub 1-0:1.0: 1 port detected [ 2.257644] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.266022] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.270566] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.278347] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.285002] [drm] No driver support for vblank timestamp query. [ 2.291002] host1x drm: No connectors reported connected with modes [ 2.297302] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.312249] Console: switching to colour frame buffer device 128x48 [ 2.325756] host1x drm: fb0: frame buffer device [ 2.330494] host1x drm: registered panic notifier [ 2.347043] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.353608] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.359047] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.366963] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.381942] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.388806] hub 2-0:1.0: USB hub found [ 2.392643] hub 2-0:1.0: 1 port detected [ 2.397914] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.405265] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.423486] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.428064] +1.8V_RUN_VPP_FUSE: disabling [ 2.432501] +2.8V_RUN_CAM_AF: disabling [ 2.436683] +3.3V_RUN_TOUCH: disabling [ 2.440803] +1.05V_RUN_CAM_REAR: disabling [ 2.445267] +VDDIO_SDMMC3: disabling [ 2.448995] +1.2V_RUN_CAM_FRONT: disabling [ 2.453431] +2.8V_RUN_CAM: disabling [ 2.457379] +1.8V_RUN_CAM: disabling [ 2.461302] +1.05V_RUN: disabling [ 2.464987] +USB0_VBUS_SW: disabling [ 2.468591] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.473467] ALSA device list: [ 2.476429] #0: NVIDIA Tegra Jetson TK1 [ 2.481059] Waiting for root device /dev/mmcblk0p1... [ 2.702020] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.164688] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout

========================================================================

Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.120625] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127257] hub 3-0:1.0: USB hub found [ 2.131060] hub 3-0:1.0: 1 port detected [ 2.136104] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143059] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-19 18:50:05 UTC (1403203805) [ 2.155688] vdd_1v2: disabling [ 2.158908] vdd_1v5: disabling [ 2.162843] ALSA device list: [ 2.165828] #0: NVIDIA Tegra Seaboard [ 2.170284] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.178043] Please append a correct "root=" boot option; here are the available partitions: [ 2.186397] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.194648] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-00110-g3d09c62 #1 [ 2.202229] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.209969] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.217181] [<c0811c18>] (dump_stack) from [<c080ea68>] (panic+0xa0/0x218) [ 2.224052] [<c080ea68>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.231525] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.239429] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.247421] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.256278] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cd60>] (kernel_init+0x8/0xf0) [ 2.264356] [<c080cd60>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.271911] CPU1: stopping [ 2.274615] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-00110-g3d09c62 #1 [ 2.282182] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.289917] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.297128] [<c0811c18>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.304510] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.312065] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.319529] Exception stack(0xea087f68 to 0xea087fb0) [ 2.324570] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 874d96a8 00000000 [ 2.332732] 7f80: 87619f90 00000000 eafb6db0 ea086000 00000000 c081f058 00000015 ea087fb0 [ 2.340890] 7fa0: c06b3000 c06b300c 60000113 ffffffff [ 2.345938] [<c02127c0>] (__irq_svc) from [<c06b300c>] (cpuidle_enter_state+0x68/0x100) [ 2.353936] [<c06b300c>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.362706] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.369479] drm_kms_helper: panic occurred, switching back to text console [ 2.376361] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.536682] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.548583] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.555908] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.567382] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.575897] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.587829] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595153] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606628] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614440] HS USB OTG: no transceiver configured [ 3.619140] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.626983] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.634918] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646820] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654144] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665618] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674163] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686065] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693389] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.704864] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712677] HS USB OTG: no transceiver configured [ 3.717407] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725250] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733184] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745086] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752410] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.763885] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772399] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784332] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791656] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803131] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.810943] HS USB OTG: no transceiver configured [ 3.815643] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823486] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831420] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843353] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850646] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862121] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870635] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

========================================================================

Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.070044] ohci-platform: OHCI generic platform driver [ 1.075431] ohci-omap3: OHCI OMAP3 driver [ 1.079594] SPEAr-ohci: OHCI SPEAr driver [ 1.084420] usbcore: registered new interface driver usb-storage [ 1.095443] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100528] ci_hdrc ci_hdrc.0: no supported roles [ 1.105355] 2184200.usb supply vbus not found, using dummy regulator [ 1.115457] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120544] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125462] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.137730] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.143932] hub 1-0:1.0: USB hub found [ 1.147734] hub 1-0:1.0: 1 port detected [ 1.152468] mousedev: PS/2 mouse device common for all mice [ 1.160561] i2c /dev entries driver [ 1.165221] usbcore: registered new interface driver uvcvideo [ 1.170996] USB Video Class driver (1.1.1) [ 1.175119] gspca_main: v2.14.0 registered [ 1.181799] sdhci: Secure Digital Host Controller Interface driver [ 1.188007] sdhci: Copyright(c) Pierre Ossman [ 1.193209] Synopsys Designware Multimedia Card Interface Driver [ 1.200125] usbcore: registered new interface driver usbhid [ 1.205724] usbhid: USB HID core driver [ 1.214131] TCP: cubic registered [ 1.217468] NET: Registered protocol family 17 [ 1.221962] can: controller area network core (rev 20120528 abi 9) [ 1.228229] NET: Registered protocol family 29 [ 1.232690] can: raw protocol (rev 20120528) [ 1.236986] can: broadcast manager protocol (rev 20120528 t) [ 1.242674] can: netlink gateway (rev 20130117) max_hops=1 [ 1.248552] Key type dns_resolver registered [ 1.253326] ThumbEE CPU extension supported. [ 1.257627] Registering SWP/SWPB emulation handler [ 1.263543] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.278723] ALSA device list: [ 1.281707] No soundcards found. [ 1.285689] Waiting for root device /dev/mmcblk0p2... [ 60.322860] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout