Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc5-97-g6fa9bff/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 1:08.26 bbb arm-omap2plus_defconfig : FAILED 1:53.85 bbb arm-multi_v7_defconfig : FAILED 1:59.90 bbb arm-multi_v7_nosmp_defconfig : FAILED 1:57.57 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.51 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.04 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:53.84 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:54.32 beaver arm-tegra_defconfig : FAILED 1:44.41 beaver arm-multi_v7_defconfig : FAILED 1:50.12 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:46.00 chitra powerpc-ppc64_defconfig : FAILED 1:57.92 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.03 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.62 cosmic arm-multi_v7_defconfig : FAILED 2:08.75 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:09.73 dalmore arm-tegra_defconfig : FAILED 1:48.89 dalmore arm-multi_v7_defconfig : FAILED 1:58.32 dalmore arm-multi_lpae_defconfig : FAILED 1:58.83 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:55.70 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.46 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.70 omap5uevm arm-multi_lpae_defconfig : FAILED 0:53.46 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:07.23 seaboard arm-tegra_defconfig : FAILED 1:49.82 seaboard arm-multi_v7_defconfig : FAILED 1:59.00 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:56.35 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.58 snowball arm-u8500_defconfig : FAILED 1:58.24 snowball arm-multi_v7_defconfig : FAILED 2:15.48 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.47 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.01
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.57 arndale arm-exynos_defconfig : passed 1:34.33 arndale arm-multi_v7_defconfig : passed 1:27.97 arndale arm-multi_lpae_defconfig : passed 1:20.98 capri arm-bcm_defconfig : passed 0:48.55 capri arm-multi_v7_defconfig : passed 0:57.16 capri arm-multi_v7_nosmp_defconfig : warnings 0:47.69 chitra powerpc-pasemi_defconfig : passed 1:58.80 colombus arm-sunxi_defconfig : passed 2:23.82 colombus arm-multi_v7_defconfig : passed 2:32.82 colombus arm-multi_lpae_defconfig : passed 2:38.25 cubie arm-sunxi_defconfig : passed 0:49.69 cubie arm-multi_v7_defconfig : passed 0:52.08 cubie arm-multi_v7_nosmp_defconfig : passed 0:57.40 cubie2 arm-sunxi_defconfig : passed 0:50.18 cubie2 arm-multi_v7_defconfig : passed 0:52.77 cubie2 arm-multi_lpae_defconfig : passed 0:54.08 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:56.25 cubox arm-multi_v7_defconfig : passed 1:05.93 cubox arm-mvebu_v7_defconfig : passed 1:10.58 cubox arm-multi_v7_nosmp_defconfig : passed 1:10.52 hummingboard arm-imx_v6_v7_defconfig : passed 1:38.96 hummingboard arm-multi_v7_defconfig : passed 1:32.75 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:10.56 jetsontk1 arm-tegra_defconfig : passed 1:33.63 jetsontk1 arm-multi_v7_defconfig : passed 1:37.50 jetsontk1 arm-multi_lpae_defconfig : passed 1:47.65 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:37.54 omap5uevm arm-omap2plus_defconfig : passed 1:03.40 pandaes arm-omap2plus_defconfig : warnings 1:44.67 pandaes arm-multi_v7_defconfig : passed 1:41.15 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:04.04 pi arm-exynos_defconfig : passed 2:08.85 pi arm-multi_v7_defconfig : passed 3:09.12 pi arm-multi_lpae_defconfig : passed 2:19.56 pi arm-multi_v7_nosmp_defconfig : warnings 2:08.94 pit arm-exynos_defconfig : passed 2:12.71 pit arm-multi_v7_defconfig : passed 2:11.92 pit arm-multi_lpae_defconfig : passed 2:22.64 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.90 seattle arm64-defconfig : warnings 2:22.36 snow arm-exynos_defconfig : passed 2:11.28 snow arm-multi_v7_defconfig : passed 2:02.03 snow arm-multi_lpae_defconfig : passed 1:58.72 trimslice arm-multi_v7_defconfig : passed 2:45.72 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.84 wandboard arm-multi_v7_defconfig : passed 1:17.21 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:11.90
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.11 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:15.58 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:21.28 parallella arm-multi_v7_defconfig : OFFLINE 2:25.44 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.48 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:43.75 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.31 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:46.94 sama5 arm-sama5_defconfig : OFFLINE 2:19.29 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:21.22 socfpga arm-socfpga_defconfig : OFFLINE 2:24.68 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.03 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.72 trimslice arm-tegra_defconfig : OFFLINE 2:17.20
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.024313] hctosys: unable to open rtc device (rtc0) [ 2.033256] MAIN_DC: disabling [ 2.034858] hdmi-en: disabling [ 2.038286] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.045288] Unable to handle kernel paging request at virtual address c1038dc0 [ 2.051318] pgd = c0204000 [ 2.054010] [c1038dc0] *pgd=4100041e(bad) [ 2.058005] Internal error: Oops: 8000000d [#1] ARM [ 2.062863] Modules linked in: [ 2.065904] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-00097-g6fa9bff #1 [ 2.074406] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.080482] task: c10065b0 ti: c1000000 task.ti: c1000000 [ 2.085866] PC is at 0xc1038dc0 [ 2.088996] LR is at cpu_init+0x14/0x54 [ 2.092810] pc : [<c1038dc0>] lr : [<c0309f78>] psr: 400001d3 [ 2.092810] sp : c1001f50 ip : 00000000 fp : 00000000 [ 2.104266] r10: c1035a18 r9 : c10065b0 r8 : 79a9ddf6 [ 2.109473] r7 : 00000001 r6 : c10b6500 r5 : c1038dc0 r4 : c1137b84 [ 2.115984] r3 : c030d7e0 r2 : 00cfa02c r1 : 6e07c059 r0 : 00000000 [ 2.122495] Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 2.129785] Control: 10c53c7d Table: 6e07c059 DAC: 00000051 [ 2.135514] Process swapper (pid: 0, stack limit = 0xc1000218) [ 2.141330] Stack: (0xc1001f50 to 0xc1002000) [ 2.145672] 1f40: c10ff095 c034df78 00000000 c1035a18 [ 2.153832] 1f60: c10067dc c030c550 c1037680 7309b212 00000000 c10ff095 c1000000 c100212c [ 2.161991] 1f80: c10b59a0 c1002134 c10ff095 c10ff095 c1001fa4 c0a8aeec c1035e88 c1000000 [ 2.170150] 1fa0: c1001fac c0a8b0ec c10b6460 c0357d58 00000001 ffffffff 00000000 c0f00c40 [ 2.178310] 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f89a20 c11011d4 c10020b4 [ 2.186468] 1fe0: c0f89a1c c1007770 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 2.194637] [<c0309f78>] (cpu_init) from [<c034df78>] (atomic_notifier_call_chain+0x18/0x20) [ 2.203052] [<c034df78>] (atomic_notifier_call_chain) from [<c030c550>] (__switch_to+0x34/0x64) [ 2.211729] Code: ffffffe0 c1038db4 c1038db4 c03caabc (00000000) [ 2.217803] ---[ end trace cb88537fdc8fa202 ]--- [ 2.222402] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.229086] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [arndale 01:06]: got exception: panic ~$off
[PYBOOT] [arndale 01:07]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.630811] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641096] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648174] usbcore: registered new interface driver usbhid [ 1.654100] usbhid: USB HID core driver [ 1.666155] NET: Registered protocol family 10 [ 1.672721] sit: IPv6 over IPv4 tunneling driver [ 1.678846] NET: Registered protocol family 17 [ 1.683609] can: controller area network core (rev 20120528 abi 9) [ 1.690244] NET: Registered protocol family 29 [ 1.694960] can: raw protocol (rev 20120528) [ 1.699478] can: broadcast manager protocol (rev 20120528 t) [ 1.705470] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712213] Key type dns_resolver registered [ 1.717117] omap_voltage_late_init: Voltage driver support not added [ 1.725408] ThumbEE CPU extension supported. [ 1.730038] Registering SWP/SWPB emulation handler [ 1.772333] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778876] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786651] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795359] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803282] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811102] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818914] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826260] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834933] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842870] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852610] mmc1: new high speed MMC card at address 0001 [ 1.859856] hctosys: unable to open rtc device (rtc0) [ 1.872967] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878992] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885963] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894804] mmcblk1: p1 p2 [ 1.900506] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:57]: got exception: timeout ~$off
[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.320356] sdhci: Secure Digital Host Controller Interface driver [ 1.326884] sdhci: Copyright(c) Pierre Ossman [ 1.332712] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.395410] Synopsys Designware Multimedia Card Interface Driver [ 1.402823] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.412053] ledtrig-cpu: registered to indicate activity on CPUs [ 1.418797] usbcore: registered new interface driver usbhid [ 1.424680] usbhid: USB HID core driver [ 1.434276] NET: Registered protocol family 10 [ 1.440769] sit: IPv6 over IPv4 tunneling driver [ 1.446648] NET: Registered protocol family 17 [ 1.451392] can: controller area network core (rev 20120528 abi 9) [ 1.457989] NET: Registered protocol family 29 [ 1.462685] can: raw protocol (rev 20120528) [ 1.467199] can: broadcast manager protocol (rev 20120528 t) [ 1.473177] can: netlink gateway (rev 20130117) max_hops=1 [ 1.479744] Key type dns_resolver registered [ 1.484545] omap_voltage_late_init: Voltage driver support not added [ 1.492335] ThumbEE CPU extension supported. [ 1.504933] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.512507] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.520579] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.528325] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536015] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.543701] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.550989] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.558673] hctosys: unable to open rtc device (rtc0) [ 1.569489] Waiting for root device /dev/mmcblk0p2... [ 1.604666] mmc1: new high speed MMC card at address 0001 [ 1.611132] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.616215] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.622704] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.631141] mmcblk1: p1 p2
[PYBOOT] [bbb 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:55]: got exception: timeout ~$off
[PYBOOT] [bbb 01:56]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.051940] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.058066] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.064400] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.071285] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.080894] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.090407] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.097434] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.140670] ledtrig-cpu: registered to indicate activity on CPUs [ 2.149366] oprofile: using arm/armv7 [ 2.154506] Initializing XFRM netlink socket [ 2.159609] NET: Registered protocol family 10 [ 2.170432] sit: IPv6 over IPv4 tunneling driver [ 2.179231] NET: Registered protocol family 17 [ 2.184172] NET: Registered protocol family 15 [ 2.189452] Key type dns_resolver registered [ 2.194320] omap_voltage_late_init: Voltage driver support not added [ 2.201062] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.209541] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.219822] ThumbEE CPU extension supported. [ 2.224478] Registering SWP/SWPB emulation handler [ 2.229524] SmartReflex Class3 initialized [ 2.299153] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.306487] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.317047] mmc1: new high speed MMC card at address 0001 [ 2.329189] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.337538] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.345323] hctosys: unable to open rtc device (rtc0) [ 2.350786] sr_init: No PMIC hook to init smartreflex [ 2.356463] sr_init: platform driver register failed for SR [ 2.396833] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.404836] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.419131] mmcblk1: p1 p2 [ 2.436533] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.712177] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719242] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745528] rtc-ds1307 2-006f: SET TIME! [ 1.751280] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758016] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762623] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.770794] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776579] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.784817] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.793959] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.800840] hub 1-0:1.0: USB hub found [ 1.804785] hub 1-0:1.0: 1 port detected [ 1.809167] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.814931] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823029] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832045] hub 2-0:1.0: USB hub found [ 1.836004] hub 2-0:1.0: 1 port detected [ 1.842035] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876149] vdd_3v3: supplied by regen1 [ 1.915799] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.933355] aic_dvdd_fixed: disabling [ 1.938179] Waiting for root device /dev/mmcblk0p1... [ 1.982058] mmc1: new high speed MMC card at address 0001 [ 1.988028] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.992916] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999257] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006297] mmcblk1: p1 [ 2.115026] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150090] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175141] hub 2-1:1.0: USB hub found [ 2.179133] hub 2-1:1.0: 4 ports detected [ 2.271166] hub 1-1:1.0: USB hub found [ 2.275149] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:53]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717964] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725037] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750564] rtc-ds1307 2-006f: SET TIME! [ 1.756319] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763056] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767655] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775841] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781611] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789841] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798987] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805855] hub 1-0:1.0: USB hub found [ 1.809800] hub 1-0:1.0: 1 port detected [ 1.814190] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.819952] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828054] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837050] hub 2-0:1.0: USB hub found [ 1.841014] hub 2-0:1.0: 1 port detected [ 1.847024] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881165] vdd_3v3: supplied by regen1 [ 1.917806] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935363] aic_dvdd_fixed: disabling [ 1.940129] Waiting for root device /dev/mmcblk0p1... [ 1.962100] mmc1: new high speed MMC card at address 0001 [ 1.968058] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.972944] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979291] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986160] mmcblk1: p1 [ 2.120050] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155079] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180160] hub 2-1:1.0: USB hub found [ 2.184156] hub 2-1:1.0: 4 ports detected [ 2.276188] hub 1-1:1.0: USB hub found [ 2.280166] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.595495] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.602546] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.627900] rtc-ds1307 2-006f: SET TIME! [ 1.633526] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.640234] rtc-ds1307 2-006f: 64 bytes nvram [ 1.644818] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.652177] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.657945] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.666155] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.675307] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.682030] hub 1-0:1.0: USB hub found [ 1.685978] hub 1-0:1.0: 1 port detected [ 1.690296] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.696056] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.704136] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.713011] hub 2-0:1.0: USB hub found [ 1.716951] hub 2-0:1.0: 1 port detected [ 1.722201] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.758120] vdd_3v3: supplied by regen1 [ 1.789219] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.802220] aic_dvdd_fixed: disabling [ 1.807593] Waiting for root device /dev/mmcblk0p1... [ 1.854433] mmc1: new high speed MMC card at address 0001 [ 1.860302] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.865133] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.871431] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.878219] mmcblk1: p1 [ 1.997435] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.027455] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.056237] hub 2-1:1.0: USB hub found [ 2.060217] hub 2-1:1.0: 4 ports detected [ 2.152240] hub 1-1:1.0: USB hub found [ 2.156209] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:52]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:53]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.184142] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.191012] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.201413] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.206272] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.212568] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.219430] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.229024] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.238527] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.245590] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.293519] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.299822] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.306696] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.316282] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.325777] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.332818] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.338937] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.345254] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.352101] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.361685] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.371181] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.378221] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.384896] vdd_3v3: supplied by regen1 [ 2.423735] hctosys: unable to open rtc device (rtc0) [ 2.429041] sr_init: No PMIC hook to init smartreflex [ 2.434579] sr_init: platform driver register failed for SR [ 2.481908] aic_dvdd_fixed: disabling [ 2.486132] ldousb: disabling [ 2.489395] mmc1: new high speed MMC card at address 0001 [ 2.497385] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.502813] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.509635] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.518115] mmcblk1: p1 [ 2.525446] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.188495] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.194078] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.201166] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.211168] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.220577] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.226087] vdd_1v8_gen: supplied by vdd_5v_in [ 3.233108] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.239728] [drm] No driver support for vblank timestamp query. [ 3.245665] drm drm: No connectors reported connected with modes [ 3.251671] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.277466] Console: switching to colour frame buffer device 128x48 [ 3.289753] drm drm: fb0: frame buffer device [ 3.308436] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.317053] usb3_vbus: supplied by vdd_5v_in [ 3.323469] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.329926] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.335337] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.343175] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.358447] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.365307] hub 1-0:1.0: USB hub found [ 3.369081] hub 1-0:1.0: 1 port detected [ 3.373986] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.379397] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.387131] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.398440] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.405200] hub 2-0:1.0: USB hub found [ 3.408969] hub 2-0:1.0: 1 port detected [ 3.417741] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.431453] vdd_sata,avdd_plle: disabling [ 3.436263] usb1_vbus: disabling [ 3.440390] Waiting for root device /dev/mmcblk0p1... [ 3.718446] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.656981] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.122754] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128336] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134949] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144942] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154096] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159569] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165211] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171821] [drm] No driver support for vblank timestamp query. [ 3.177749] drm drm: No connectors reported connected with modes [ 3.183749] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203103] Console: switching to colour frame buffer device 128x48 [ 3.214901] drm drm: fb0: frame buffer device [ 3.219338] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227252] usb3_vbus: supplied by vdd_5v_in [ 3.233492] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239938] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245343] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.253064] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267838] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274209] hub 1-0:1.0: USB hub found [ 3.277971] hub 1-0:1.0: 1 port detected [ 3.282605] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288014] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295673] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307835] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314103] hub 2-0:1.0: USB hub found [ 3.317862] hub 2-0:1.0: 1 port detected [ 3.325356] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338467] vdd_sata,avdd_plle: disabling [ 3.342858] usb1_vbus: disabling [ 3.346794] Waiting for root device /dev/mmcblk0p1... [ 3.627841] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566375] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:44]: got exception: timeout ~$off
[PYBOOT] [beaver 01:45]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.444018] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.454022] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462903] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.468423] vdd_1v8_gen: supplied by vdd_5v_in [ 3.476932] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.483552] [drm] No driver support for vblank timestamp query. [ 3.489551] drm drm: No connectors reported connected with modes [ 3.495564] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.521453] Console: switching to colour frame buffer device 128x48 [ 3.533279] drm drm: fb0: frame buffer device [ 3.560508] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.568028] usb3_vbus: supplied by vdd_5v_in [ 3.574141] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.580607] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.586029] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.594013] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.610518] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.618237] hub 1-0:1.0: USB hub found [ 3.622020] hub 1-0:1.0: 1 port detected [ 3.626828] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.632260] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.640134] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.660510] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.668106] hub 2-0:1.0: USB hub found [ 3.671880] hub 2-0:1.0: 1 port detected [ 3.680157] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.699001] vdd_sata,avdd_plle: disabling [ 3.703423] usb1_vbus: disabling [ 3.706850] ALSA device list: [ 3.709807] #0: NVIDIA Tegra Beaver [ 3.714045] Waiting for root device /dev/mmcblk0p1... [ 3.990514] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.975934] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:44]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized EEH: devices created clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (21) used greatest stack depth: 13472 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver kworker/u4:1 (24) used greatest stack depth: 12944 bytes left kworker/u4:1 (35) used greatest stack depth: 11744 bytes left cpuidle: using governor menu kworker/u4:0 (38) used greatest stack d [PYBOOT] [chitra 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:55]: got exception: timeout ~$off
[PYBOOT] [chitra 01:56]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.531822] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.546147] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.071391] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.470557] eth0: device MAC address ea:17:65:d8:92:90 [ 89.623839] RX IPC Checksum Offload disabled [ 89.628461] No MAC Management Counters available [ 89.634225] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/ea:17:65:d8:92:90 Sending on LPF/eth0/ea:17:65:d8:92:90 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.493337] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.567574] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.577933] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.652405] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.662736] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.736980] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.747308] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.821498] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.831827] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.906087] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.916420] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.990621] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.000978] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.075355] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.085757] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.159958] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.170279] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.244537] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.254861] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.329099] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.339420] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.413672] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.424001] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.498238] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.508563] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.582753] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.593081] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.667322] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.677653] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.751848] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.762173] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.836417] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.846744] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.083045] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.157028] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.167106] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.241084] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.251165] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.325143] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335225] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409203] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419285] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493304] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503390] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577375] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587460] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661455] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671521] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745499] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755572] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829559] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839632] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913614] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923682] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997668] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007744] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081725] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091795] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165771] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175846] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249826] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259906] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333890] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343966] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417949] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.428026] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.877969] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951886] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961941] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035858] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045915] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119834] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129889] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203804] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213861] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287781] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297848] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371770] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381850] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455772] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465834] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539754] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549800] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623717] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633773] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707692] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717748] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791660] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801711] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875624] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885677] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959598] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969651] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043569] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053623] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127547] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137605] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211518] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221578] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:09]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.486310] Key type dns_resolver registered [ 2.492725] ThumbEE CPU extension supported. [ 2.497149] Registering SWP/SWPB emulation handler [ 2.528229] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.536120] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.544571] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.558893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.565689] [drm] No driver support for vblank timestamp query. [ 2.581966] mmc1: new high speed MMC card at address 0001 [ 2.591981] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.600401] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.608879] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.617549] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.627296] mmcblk1: p1 [ 2.742519] Console: switching to colour frame buffer device 240x75 [ 2.830240] drm drm: fb0: frame buffer device [ 2.853954] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.864018] usb2_vbus: supplied by vdd-sys-5v0 [ 2.875599] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.881270] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.889955] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.903989] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.914426] hub 1-0:1.0: USB hub found [ 2.918431] hub 1-0:1.0: 1 port detected [ 2.929001] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.943052] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.004958] dvdd_ts: disabling [ 3.008057] usb1_vbus: disabling [ 3.011396] vdd_cam_1v8_reg: disabling [ 3.019002] Waiting for root device /dev/mmcblk0p1... [ 3.234010] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.212732] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.188947] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.490959] Key type dns_resolver registered [ 2.497370] ThumbEE CPU extension supported. [ 2.501793] Registering SWP/SWPB emulation handler [ 2.548335] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.553712] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.560764] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.573982] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.580759] [drm] No driver support for vblank timestamp query. [ 2.593919] mmc1: new high speed MMC card at address 0001 [ 2.602271] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.608784] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.617205] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.625374] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.634867] mmcblk1: p1 [ 2.756642] Console: switching to colour frame buffer device 240x75 [ 2.844027] drm drm: fb0: frame buffer device [ 2.860444] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.870533] usb2_vbus: supplied by vdd-sys-5v0 [ 2.881214] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886810] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895392] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.910459] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.920760] hub 1-0:1.0: USB hub found [ 2.924840] hub 1-0:1.0: 1 port detected [ 2.935419] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.947219] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.001799] dvdd_ts: disabling [ 3.004898] usb1_vbus: disabling [ 3.008308] vdd_cam_1v8_reg: disabling [ 3.015711] Waiting for root device /dev/mmcblk0p1... [ 3.235418] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.190265] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 77.380706] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.037254] can: broadcast manager protocol (rev 20120528 t) [ 2.043009] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049688] Key type dns_resolver registered [ 2.054796] ThumbEE CPU extension supported. [ 2.085711] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.090649] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.100731] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.122823] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.129508] [drm] No driver support for vblank timestamp query. [ 2.293297] Console: switching to colour frame buffer device 240x75 [ 2.381252] drm drm: fb0: frame buffer device [ 2.385981] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.394118] usb2_vbus: supplied by vdd-sys-5v0 [ 2.403049] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.408613] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.416518] mmc1: new high speed MMC card at address 0001 [ 2.423173] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.428203] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.434929] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.441013] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.447413] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.454184] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.462382] mmcblk1: p1 [ 2.466268] hub 1-0:1.0: USB hub found [ 2.473258] hub 1-0:1.0: 1 port detected [ 2.482939] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.494276] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.535139] dvdd_ts: disabling [ 2.538294] usb1_vbus: disabling [ 2.541576] vdd_cam_1v8_reg: disabling [ 2.547043] Waiting for root device /dev/mmcblk0p1... [ 2.785421] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.738660] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.638872] Bluetooth: RFCOMM ver 1.11 [ 2.642848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.648245] Bluetooth: BNEP socket layer initialized [ 2.653337] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.659339] Bluetooth: HIDP socket layer initialized [ 2.666280] Key type dns_resolver registered [ 2.675840] Registering SWP/SWPB emulation handler [ 2.706425] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.713712] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.723646] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.748936] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.755743] [drm] No driver support for vblank timestamp query. [ 2.933557] Console: switching to colour frame buffer device 240x75 [ 3.020024] drm drm: fb0: frame buffer device [ 3.051371] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.058602] usb2_vbus: supplied by vdd-sys-5v0 [ 3.068332] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.074136] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.083307] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.101376] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.115580] hub 1-0:1.0: USB hub found [ 3.119616] hub 1-0:1.0: 1 port detected [ 3.133456] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.148643] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.244106] dvdd_ts: disabling [ 3.247209] usb1_vbus: disabling [ 3.250473] vdd_cam_1v8_reg: disabling [ 3.255225] ALSA device list: [ 3.258218] #0: NVIDIA Tegra Dalmore [ 3.264159] Waiting for root device /dev/mmcblk0p1... [ 3.441370] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.476246] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 46.931339] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.653007] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661919] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.693051] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.694309] usbcore: registered new interface driver usbhid [ 1.699464] usbhid: USB HID core driver [ 1.708277] NET: Registered protocol family 10 [ 1.708905] sit: IPv6 over IPv4 tunneling driver [ 1.712129] NET: Registered protocol family 17 [ 1.716141] NET: Registered protocol family 15 [ 1.720600] Key type dns_resolver registered [ 1.724928] Registering SWP/SWPB emulation handler [ 1.730782] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.735168] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.742574] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.773568] max98090 1-0010: MAX98090 REVID=0x43 [ 1.775827] max98090 1-0010: use default 2.8v micbias [ 1.778515] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.787882] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.797407] mmc1: new DDR MMC card at address 0001 [ 1.801797] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.805228] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.815270] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.819455] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.825360] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.831255] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.837885] mmcblk1: p1 p2 [ 1.841013] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.866536] VDD10_HDMI_1.0V: disabling [ 1.867251] vdd_g3d: disabling [ 1.868329] BUCK8_2.8V: disabling [ 1.872344] ALSA device list: [ 1.873959] #0: Odroid-U3 [ 1.877708] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.811532] 9ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.820046] 9ee0: 00000008 2000ee6d c0d6b5bc ee6db000 00061a80 c099d2a8 ee61d000 ee6db258 [ 2.828572] 9f00: eefd0600 00000000 eefcce80 c0357884 eefcce98 c1302100 eefcce80 ee61d018 [ 2.837094] 9f20: 00000008 e000eefc c1302100 ee638000 eefcce80 c0357acc ee618a40 ee61d000 [ 2.845609] 9f40: c0357a94 00000000 ee618a40 ee61d000 c0357a94 00000000 00000000 00000000 [ 2.854128] 9f60: 00000000 c035cd74 41402789 00000000 00000001 ee61d000 00000000 00000000 [ 2.862648] 9f80: ee639f80 ee639f80 00000000 00000000 ee639f90 ee639f90 ee639fac ee618a40 [ 2.871167] 9fa0: c035cc98 00000000 00000000 c0307eb8 00000000 00000000 00000000 00000000 [ 2.879681] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.888201] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 2089cbe5 251020b1 [ 2.896719] [<c0384fa8>] (__irq_wake_thread) from [<c0385040>] (handle_irq_event_percpu+0x60/0x140) [ 2.906157] [<c0385040>] (handle_irq_event_percpu) from [<c0385164>] (handle_irq_event+0x44/0x68) [ 2.915413] [<c0385164>] (handle_irq_event) from [<c0388330>] (handle_fasteoi_irq+0xb4/0x194) [ 2.924297] [<c0388330>] (handle_fasteoi_irq) from [<c0384738>] (generic_handle_irq+0x24/0x34) [ 2.933271] [<c0384738>] (generic_handle_irq) from [<c03849e8>] (__handle_domain_irq+0x5c/0xb4) [ 2.942332] [<c03849e8>] (__handle_domain_irq) from [<c0301770>] (gic_handle_irq+0x54/0x94) [ 2.951035] [<c0301770>] (gic_handle_irq) from [<c030c654>] (__irq_svc+0x54/0x70) [ 2.958819] Exception stack(0xee639e40 to 0xee639e88) [ 2.964077] 9e40: 0c7013fb 00000000 ff550000 c09da660 c1444cf8 000017ff 0c6ffd39 00061a80 [ 2.972590] 9e60: c0d6b5c8 00000000 eefcce80 ee61d000 00000000 ee639e90 c030f87c c09da664 [ 2.981110] 9e80: a0000013 ffffffff [ 2.984742] [<c030c654>] (__irq_svc) from [<c09da664>] (arch_counter_get_cntvct+0x4/0xc) [ 2.993171] [<c09da664>] (arch_counter_get_cntvct) from [<c030f87c>] (arch_timer_read_counter_long+0x14/0x18) [ 3.003504] [<c030f87c>] (arch_timer_read_counter_long) from [<c0589370>] (__timer_delay+0x50/0x60) [ 3.012923] [<c0589370>] (__timer_delay) from [<c09a15e0>] (mmc_go_idle+0x100/0x104) [ 3.020994] [<c09a15e0>] (mmc_go_idle) from [<c099d2a8>] (mmc_rescan+0x264/0x34c) [ 3.028793] [<c099d2a8>] (mmc_rescan) from [<c0357884>] (process_one_work+0x138/0x348) [ 3.037044] [<c0357884>] (process_one_work) from [<c0357acc>] (worker_thread+0x38/0x510) [ 3.045480] [<c0357acc>] (worker_thread) from [<c035cd74>] (kthread+0xdc/0xf4) [ 3.053013] [<c035cd74>] (kthread) from [<c0307eb8>] (ret_from_fork+0x14/0x3c) [ 3.060538] Code: e2811024 eb08169d e3500000 18bd8038 (e5951070) [ 3.066891] ---[ end trace e9834fda689ef5fa ]--- [ 3.071696] Kernel panic - not syncing: Fatal exception in interrupt [ 4.055252] SMP: failed to stop secondary CPUs [ 4.059874] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:51]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:52]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.757462] usbcore: registered new interface driver usbhid [ 1.763291] usbhid: USB HID core driver [ 1.771830] NET: Registered protocol family 10 [ 1.776759] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.783910] sit: IPv6 over IPv4 tunneling driver [ 1.789195] NET: Registered protocol family 17 [ 1.793867] can: controller area network core (rev 20120528 abi 9) [ 1.800374] NET: Registered protocol family 29 [ 1.805032] can: raw protocol (rev 20120528) [ 1.809500] can: broadcast manager protocol (rev 20120528 t) [ 1.815426] can: netlink gateway (rev 20130117) max_hops=1 [ 1.821448] Key type dns_resolver registered [ 1.826005] omap_vc_init_channel: No PMIC info for vdd_core [ 1.831843] omap_vp_init: No PMIC info for vdd_core [ 1.836949] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.842600] omap_vp_init: No PMIC info for vdd_mm [ 1.847523] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.853256] omap_vp_init: No PMIC info for vdd_mpu [ 1.858775] Power Management for TI OMAP4+ devices. [ 1.864000] ThumbEE CPU extension supported. [ 1.868497] Registering SWP/SWPB emulation handler [ 1.875571] palmas 0-0048: Irq flag is 0x00000000 [ 1.902185] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.912848] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.924198] mmc0: new high speed MMC card at address 0001 [ 1.930347] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.935293] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.941626] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973732] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.000267] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.010302] smsc95xx v1.0.4 [ 2.041296] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.049207] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.656798] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663184] usbcore: registered new interface driver usbhid [ 1.669006] usbhid: USB HID core driver [ 1.675636] NET: Registered protocol family 10 [ 1.680851] sit: IPv6 over IPv4 tunneling driver [ 1.686017] NET: Registered protocol family 17 [ 1.690669] can: controller area network core (rev 20120528 abi 9) [ 1.697159] NET: Registered protocol family 29 [ 1.701808] can: raw protocol (rev 20120528) [ 1.706272] can: broadcast manager protocol (rev 20120528 t) [ 1.712199] can: netlink gateway (rev 20130117) max_hops=1 [ 1.718143] Key type dns_resolver registered [ 1.722677] omap_vc_init_channel: No PMIC info for vdd_core [ 1.728503] omap_vp_init: No PMIC info for vdd_core [ 1.733596] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.739235] omap_vp_init: No PMIC info for vdd_mm [ 1.744143] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.749877] omap_vp_init: No PMIC info for vdd_mpu [ 1.755154] Power Management for TI OMAP4+ devices. [ 1.760360] ThumbEE CPU extension supported. [ 1.764920] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.776423] palmas 0-0048: Irq flag is 0x00000000 [ 1.799496] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.808848] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.833270] mmc0: new high speed MMC card at address 0001 [ 1.839151] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.844017] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.850328] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.865388] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.887868] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.904902] smsc95xx v1.0.4 [ 1.923316] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 1.931237] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.658297] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.670846] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.677344] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.682797] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.690696] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.704999] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.712001] hub 3-0:1.0: USB hub found [ 1.716114] hub 3-0:1.0: 1 port detected [ 1.727267] mmc2: switch to bus width 8 failed [ 1.729159] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.729162] [drm] No driver support for vblank timestamp query. [ 1.744587] mmc2: switch to bus width 4 failed [ 1.749117] mmc2: new high speed MMC card at address 0001 [ 1.755494] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.760694] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.767074] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.774187] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.774606] mmcblk2: p3 [ 1.782148] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.784992] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.792296] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.819159] Console: switching to colour frame buffer device 170x48 [ 1.829054] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.833495] mmc0: new SDIO card at address 0001 [ 1.876944] drm drm: fb0: frame buffer device [ 1.893959] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.900814] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.907914] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.922319] vdd_1v5: disabling [ 1.925405] vdd_1v2: disabling [ 2.537302] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.548715] Waiting for root device /dev/mmcblk0p3... [ 58.769307] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.612062] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.618392] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.628320] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.634768] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.640180] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.647932] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.663188] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.669668] hub 3-0:1.0: USB hub found [ 1.673513] hub 3-0:1.0: 1 port detected [ 1.684050] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.690669] [drm] No driver support for vblank timestamp query. [ 1.697516] mmc2: switch to bus width 8 failed [ 1.702210] mmc2: switch to bus width 4 failed [ 1.706686] mmc2: new high speed MMC card at address 0001 [ 1.712393] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.724392] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.730763] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.732072] mmcblk2: p3 [ 1.746582] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.754166] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.756910] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.763883] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.787254] Console: switching to colour frame buffer device 170x48 [ 1.835375] drm drm: fb0: frame buffer device [ 1.839848] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.846252] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.853136] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.864765] vdd_1v5: disabling [ 1.867830] vdd_1v2: disabling [ 1.873719] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.882286] mmc0: new SDIO card at address 0001 [ 2.562393] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.573240] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:55]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.644114] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.650144] Bluetooth: HIDP socket layer initialized [ 1.655883] Key type dns_resolver registered [ 1.660535] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.666981] Registering SWP/SWPB emulation handler [ 1.682426] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.689146] VDDIO_HDMI: supplied by vdd_5v0 [ 1.693693] vdd_sys: supplied by vdd_5v0 [ 1.697701] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.702766] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.709357] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.719371] mmc0: new SDIO card at address 0001 [ 1.720000] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.720085] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.720149] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.724394] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.740071] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.742989] hub 3-0:1.0: USB hub found [ 1.743050] hub 3-0:1.0: 1 port detected [ 1.767879] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.774523] [drm] No driver support for vblank timestamp query. [ 1.860913] Console: switching to colour frame buffer device 170x48 [ 1.878442] drm drm: fb0: frame buffer device [ 1.910056] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.917042] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.935561] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.953788] vdd_1v5: disabling [ 1.956840] vdd_1v2: disabling [ 1.960005] ALSA device list: [ 1.962987] #0: NVIDIA Tegra Seaboard [ 2.301695] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.313158] Waiting for root device /dev/mmcblk0p3... [ 76.218795] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.182015] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.190371] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.230097] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:11]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.964080] can: controller area network core (rev 20120528 abi 9) [ 1.970336] NET: Registered protocol family 29 [ 1.974792] can: raw protocol (rev 20120528) [ 1.979095] can: broadcast manager protocol (rev 20120528 t) [ 1.984771] can: netlink gateway (rev 20130117) max_hops=1 [ 1.990783] Key type dns_resolver registered [ 1.995300] ThumbEE CPU extension supported. [ 1.999603] Registering SWP/SWPB emulation handler [ 2.010437] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.017333] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.026519] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.033538] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.040527] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.047515] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.061523] db8500-esram12: disabling [ 2.065277] db8500-esram34: disabling [ 2.069335] V-CSI/DSI: disabling [ 2.072601] mmci-reg: disabling [ 2.076354] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.082336] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.088806] Waiting for root device /dev/mmcblk0p4... [ 2.128814] mmc3: new high speed MMC card at address 0001 [ 2.134857] mmcblk3: mmc3:0001 3.53 GiB [ 2.139099] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.144744] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.150360] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.156860] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:12]: got exception: timeout ~$off
[PYBOOT] [snowball 02:13]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.902984] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910522] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916748] usbcore: registered new interface driver usbhid [ 1.922332] usbhid: USB HID core driver [ 1.929626] NET: Registered protocol family 10 [ 1.984954] sit: IPv6 over IPv4 tunneling driver [ 1.990112] NET: Registered protocol family 17 [ 1.994598] can: controller area network core (rev 20120528 abi 9) [ 2.000823] NET: Registered protocol family 29 [ 2.005279] can: raw protocol (rev 20120528) [ 2.009552] can: broadcast manager protocol (rev 20120528 t) [ 2.015228] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021148] Key type dns_resolver registered [ 2.025604] ThumbEE CPU extension supported. [ 2.079986] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094665] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103759] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110748] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117736] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124694] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136413] db8500-esram12: disabling [ 2.184204] db8500-esram34: disabling [ 2.209960] V-CSI/DSI: disabling [ 2.214202] mmci-reg: disabling [ 2.217803] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223754] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.243927] Waiting for root device /dev/mmcblk0p4... [ 3.047790] mmc3: new high speed MMC card at address 0001 [ 3.059600] mmcblk3: mmc3:0001 3.53 GiB [ 3.069732] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.079254] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.093780] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.100585] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.783172] NET: Registered protocol family 35 [ 2.787933] NET: Registered protocol family 37 [ 2.793029] Registering SWP/SWPB emulation handler [ 2.803405] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.811309] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.817962] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.825012] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-09 23:38:44 UTC (955323524) [ 2.834259] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.841278] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.848266] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.855346] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.860443] mmc3: new high speed MMC card at address 0001 [ 2.874450] db8500-esram12: disabling [ 2.878234] db8500-esram34: disabling [ 2.881988] mmcblk3: mmc3:0001 3.53 GiB [ 2.886199] V-CSI/DSI: disabling [ 2.889465] mmci-reg: disabling [ 2.890472] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.898223] ALSA device list: [ 2.901214] #0: MOP500-card [ 2.904541] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.910491] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.915954] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.920440] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.927856] mmcblk3: p1 p2 p3 p4 [ 2.970886] Waiting for root device /dev/mmcblk0p4... [ 66.570770] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 m[ 20.053212] mmcblk0: error -110 sending status command, retrying inutes [ 20.062210] mmcblk0: error -110 sending status command, retrying [ 20.070675] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.082016] mmcblk0: error -110 sending status command, retrying y" INIT: cannot execute "/sbin[ 20.090625] mmcblk0: error -110 sending status command, retrying /getty" [ 20.099780] mmcblk0: error -110 sending status command, aborting INIT: Id "4" respawning too fast: disab[ 20.111150] mmcblk0: error -110 sending status command, retrying led for 5 minutes [ 20.120031] mmcblk0: error -110 sending status command, retrying [ 20.128542] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.139903] mmcblk0: error -110 sending status command, retrying y" [ 20.148700] mmcblk0: error -110 sending status command, retrying [ 20.157152] mmcblk0: error -110 sending status command, aborting [ 20.168295] mmcblk0: error -110 sending status command, retrying [ 20.176748] mmcblk0: error -110 sending status command, retrying [ 20.185173] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbi[ 20.201724] mmcblk0: error -110 sending status command, retrying n/getty" INIT: Id "1" respawni[ 20.210545] mmcblk0: error -110 sending status command, retrying ng too fast: disabled for 5 minut[ 20.219423] mmcblk0: error -110 sending status command, aborting es INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 46.975883] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter