Automated DT boot report for various ARM defconfigs.

Tree/Branch: arm-soc Git describe: v3.14-rc3-468-g56ac618 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig

Full Report ===========

da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 19.6 sec

omap2plus_defconfig ------------------- omap3-overo-storm-tobi PASS: 0 min 25.5 sec omap3-beagle-xm PASS: 1 min 2.4 sec omap4-panda PASS: 1 min 8.4 sec omap3-overo-tobi PASS: 0 min 23.1 sec am335x-bone PASS: 0 min 27.6 sec am335x-boneblack PASS: 0 min 26.0 sec omap4-panda-es PASS: 1 min 17.4 sec

multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec

tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.2 sec

sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.0 sec sun4i-a10-cubieboard PASS: 0 min 17.9 sec

bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.7 sec

mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.4 sec

exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec

multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.3 sec tegra30-beaver PASS: 0 min 24.9 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 50.6 sec sun7i-a20-cubieboard2 PASS: 0 min 17.6 sec armada-370-mirabox PASS: 0 min 22.5 sec omap4-panda PASS: 0 min 54.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard PASS: 0 min 18.8 sec bcm28155-ap PASS: 1 min 14.6 sec omap3-overo-tobi PASS: 0 min 21.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 26.3 sec omap3-overo-storm-tobi PASS: 0 min 24.5 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 55.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec

sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec

Console logs for failures =========================

mvebu_v7_defconfig ------------------

armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------

mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00468-g56ac618 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c92b4>] lr : [<c02c6960>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: eebe5c90 r9 : ee90b000 r8 : ffffffda r7 : ee90b010 r6 : 00000000 r5 : eeb080d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c0206700 ee910c60 c00ffbcc c0516d30 0000001f de20: ee910c60 00000002 c03ea324 00000000 74726f70 ee910030 00000001 eeb34c18 de40: 0000008c ee90b010 c054f518 00000000 c054f518 c0516d30 0000008c ee83c030 de60: 00000000 c01cb250 c01cb238 c0588308 ee90b010 c01c99d8 00000007 ee90b010 de80: c054f518 ee90b044 00000000 c01c9c58 00000000 c054f518 c01c9bc0 c01c80d0 dea0: ee85a7dc ee85e134 c054f518 eebe5d00 c054e478 c01c9280 c0499614 c05652c0 dec0: c054f518 c054f518 00000006 c05652c0 c05652c0 c01ca29c 00000000 c052c980 dee0: 00000006 c0516d60 c052c980 c000893c 0000008c 00000000 c04810f0 00000000 df00: 00000000 c04dea90 00000064 ee83df20 c0035d80 c016a0b0 20000113 ffffffff df20: ef7fce1b c03e3b20 0000008c c0035f74 c04dea80 00000006 ef7fce26 00000006 df40: c053deb0 c052c980 00000006 c05652c0 c05652c0 c050250c 0000008c c0525d14 df60: c0525d08 c0502c40 00000006 00000006 c050250c d456fc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03c6ffc 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03c7004 00000000 c000e338 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3b [<c02c92b4>] (__clk_put) from [<c0206700>] (mv_platform_probe+0x2ac/0x414) [<c0206700>] (mv_platform_probe) from [<c01cb250>] (platform_drv_probe+0x18/0x48) [<c01cb250>] (platform_drv_probe) from [<c01c99d8>] (really_probe+0x80/0x214) [<c01c99d8>] (really_probe) from [<c01c9c58>] (__driver_attach+0x98/0x9c) [<c01c9c58>] (__driver_attach) from [<c01c80d0>] (bus_for_each_dev+0x60/0x94) [<c01c80d0>] (bus_for_each_dev) from [<c01c9280>] (bus_add_driver+0x148/0x1f0) [<c01c9280>] (bus_add_driver) from [<c01ca29c>] (driver_register+0x78/0xf8) [<c01ca29c>] (driver_register) from [<c0516d60>] (mv_init+0x30/0x50) [<c0516d60>] (mv_init) from [<c000893c>] (do_one_initcall+0xf8/0x144) [<c000893c>] (do_one_initcall) from [<c0502c40>] (kernel_init_freeable+0x138/0x1d8) [<c0502c40>] (kernel_init_freeable) from [<c03c7004>] (kernel_init+0x8/0xf0) [<c03c7004>] (kernel_init) from [<c000e338>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 876f37c73c8f67ee ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00468-g56ac618 #1 [<c0014940>] (unwind_backtrace) from [<c0011194>] (show_stack+0x10/0x14) [<c0011194>] (show_stack) from [<c03cb7fc>] (dump_stack+0x80/0x90) [<c03cb7fc>] (dump_stack) from [<c0013d04>] (handle_IPI+0x148/0x170) [<c0013d04>] (handle_IPI) from [<c00085cc>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085cc>] (armada_370_xp_handle_irq) from [<c0011cc0>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe55b8 00000000 00000948 00000000 ee876000 c05384ac c03d2d00 ee876000 7fc0: c0565176 00000001 c0565176 ee876000 00000000 ee877fe8 c000eeac c00558b8 7fe0: 60000113 ffffffff [<c0011cc0>] (__irq_svc) from [<c00558b8>] (cpu_startup_entry+0xf4/0x134) [<c00558b8>] (cpu_startup_entry) from [<000086c4>] (0x86c4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054

# PYBOOT: Time: 20.39 seconds. # PYBOOT: Result: FAIL

multi_v7_defconfig ------------------

ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------

(user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6,

MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1  0 U8500 $ U8500 $ version

U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e

U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4

Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'

U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi

U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi

U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no

U8500 $ setenv autoload no; setenv autoboot nodhcp

U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $tftp 0x00800000 192.168.1.2:tmp/snowball-e6Lwbu/tmp6MNC4K-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-e6Lwbu/tmp6MNC4K-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-e6Lwbu/tmp6MNC4K-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## done Bytes transferred = 4542545 (455051 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4542481 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.34 seconds. # PYBOOT: Result: FAIL